The CD version of the D11R can push around 30-40 cubic metres, where as the CD version with a Coal Blade can push around 80 cubic metres. Coal Blade is around 8 metres wide and over 4 metres high, you need GPS to drive it as you cant see over the blade.
Yes Super this Caterpillar's biggest bulldozer.The D11 has been the largest since it was introduced in early 1986.THis is the D11R.The new D11T was shown to the mining public in Las Vegas back on 9/22-24.
You had a cab??? That's more than I had when I started. It's humbling to chat with a true American legend, especially as no-one else has ever mended their own machine. Just out of curiosity, which machine had the 8-foot levers?
I did i'm now virtually a cripple.hips wrecked and neck locked up from seven years rear view while ripping.go to diggerland for the day and just enjoy your health with what you do now.
@eastcoastcatskinner No, Westray was an underground mine that blew up and killed 26 miners. It's the same seam of coal and is about a mile away from where the Westray mine was.
There has been a rumor of a D12 for it least 15 years.Last time heard on the internet there was posssibly one in West Virginia.But that one coul dbe gone by now.
@haidabrave So you fill the blade and lift up to carry the load? So you push the blade into the ground until you have a load and pull it up and carry it? Just wondering, and ive seen that smaller dozers and push 2 inches the whole way while ive seen some larger dozers in real life push the blade down and pull back up and go dump it somewhere.
@icemanj12 Try doing tracking repair on them! A full rebuild takes 12 or more hours, if just one pin is seized it takes 6 hours just to remove 3 pins and replaces one! BTW the cat 797 is the boss!!! And building them is fun :D
@deerhunter217 wish my highschool wouldve been more like that......our ADVANCED autoshop is about as close as they got to machines and that was simple maintenence stuff like ball joints and crap that i already knew before even getting to highschool!
@iamjackdaw2 Actually rolling dirt off your blade carries less and is a waste of machine. This operator has the blade in the proper carry position for slot dozing, they call it "carry position" because you CARRY THE DIRT. He'd pick up a little time flattening out his slot rather than trying to constantly load the blade (resulting in a dip and pushing uphill).
the komatsu will outpush the D11 easily, but the Cat dozer are a better dozer all round, the bogey on the Komatsu are rough and they use way more fuel then the Cat. Cat is more reliable Id say, but can't compare with the Komatsu in sheer pushing power.
1066D. When you work beside a MAN on an equal-sized Cat excavator, you'll find that you won't have a lot to brag about. Some guys reading this are real operators and those guys know hot air when it blows over them.
A D11R is a carry dozer, load the blade and raise slightly and carry the load to where ever, if i was the owner of that machine id have him turfed off it right now, all the wear and tear on the undercarriage loading up the power train when you don;t have to and wearing out the GET. (GROUND ENGAGING TOOLS) .
I'm with you there, bro, but you missed out the most important - don't believe everything you read on UA-cam. When do we get to see a vid of you working? I'm sure it'll be an education for all of us.
Call me crazy, but I'll be dollars to donuts that not ONE of you last three commenters are operators. Or if you are, you don't have much time in the cab. And by the way, we are not called 'drivers'. That machine was not 'struggling' as much as it may appear to y'all.
Cat makes a D12 as well. Those are some serious machines right there.
Its like anything driving one of these is great for the first few days then its just a living!!
The CD version of the D11R can push around 30-40 cubic metres, where as the CD version with a Coal Blade can push around 80 cubic metres.
Coal Blade is around 8 metres wide and over 4 metres high, you need GPS to drive it as you cant see over the blade.
Gotta dig those dual air intake and exhaust pipes! And a ripper the size of a mobile home.
cat is the only tool for the job komatsu never came near i drove these things fifty years ago nothing has changed
what an animal of a machine, pure raw power
Yes Super this Caterpillar's biggest bulldozer.The D11 has been the largest since it was introduced in early 1986.THis is the D11R.The new D11T was shown to the mining public in Las Vegas back on 9/22-24.
What a beautiful machine.
Finally, someone made a dozer vid. with an experienced operator in the cab!!
I love running bulldozers. The biggest I've run is a D-10N and it's a BLAST.
You had a cab??? That's more than I had when I started. It's humbling to chat with a true American legend, especially as no-one else has ever mended their own machine. Just out of curiosity, which machine had the 8-foot levers?
The Cat 3508 V-8 engine at 850hp and 2,105 cid has been smokeless since it least the year 2000.
I did i'm now virtually a cripple.hips wrecked and neck locked up from seven years rear view while ripping.go to diggerland for the day and just enjoy your health with what you do now.
@eastcoastcatskinner No, Westray was an underground mine that blew up and killed 26 miners. It's the same seam of coal and is about a mile away from where the Westray mine was.
Enormous!! that's the biggest one I've never seen!!!
Me 3! I am getting ready to learn how to run a Dozer!
I can't believe I find big machines like this arousing. :-)
Gawd damn that cat can push some s**t! LOVE IT!!
There has been a rumor of a D12 for it least 15 years.Last time heard on the internet there was posssibly one in West Virginia.But that one coul dbe gone by now.
I run a D10R and I use about 300 gal. per 12 hour shift pushing the this same material.
Beautiful!
There are rumors out there that Caterpillar built a D12.The market for the Komatsu D555/D575A is rather limited
@haidabrave So you fill the blade and lift up to carry the load? So you push the blade into the ground until you have a load and pull it up and carry it? Just wondering, and ive seen that smaller dozers and push 2 inches the whole way while ive seen some larger dozers in real life push the blade down and pull back up and go dump it somewhere.
you know its funny how were like omfg!! i want to run a d 11. but the guys who run them are like omfg fml..... lol
@icemanj12 Try doing tracking repair on them! A full rebuild takes 12 or more hours, if just one pin is seized it takes 6 hours just to remove 3 pins and replaces one! BTW the cat 797 is the boss!!! And building them is fun :D
Gets old going back and forth in one of those big mothers for 10 hours.
Are you the Jim How that worked for
Gregory & Cook 30 years ago on the Navajo Res between Holbrook and Galloup New Mex ??
great machine we have one in our town
Wow! Have some power!
1066d - whatever brought that on? By the way, I'm from the UK and with our fuel prices, I'd be happy to be valued the same as the fuel to fill a D11.
Nice 100+ Ton Beast.
I think was taken at a mine in Nova Scotia.What else does NS stand for?
i run d8's pulling rome scrapers... not much dozer time but i love this shit!
Roll on, that's a blade full
@deerhunter217 wish my highschool wouldve been more like that......our ADVANCED autoshop is about as close as they got to machines and that was simple maintenence stuff like ball joints and crap that i already knew before even getting to highschool!
@iamjackdaw2 Actually rolling dirt off your blade carries less and is a waste of machine. This operator has the blade in the proper carry position for slot dozing, they call it "carry position" because you CARRY THE DIRT. He'd pick up a little time flattening out his slot rather than trying to constantly load the blade (resulting in a dip and pushing uphill).
wow incredible power!!!
is this the biggest dozer that cat makes? 1066 you prolly know seems like you know your dozers lol
How much power? Around 850 (at the flywheel)?
Good operator right there.
Nyugwy,Caterpillar does not a D12.Never has to our knowledge.If they have then please produce a picture of it then.
there is D12R's at the gold mine here
Do you mean 30 gallons an hour? My old D6N used four an hour spreading and grading
how deep does this ripper go into the earth?
damn!
the komatsu will outpush the D11 easily, but the Cat dozer are a better dozer all round, the bogey on the Komatsu are rough and they use way more fuel then the Cat. Cat is more reliable Id say, but can't compare with the Komatsu in sheer pushing power.
@Toromont123 it holds just under 2000 Litres
Kamatcu 575 мощнее будет.
1066D. When you work beside a MAN on an equal-sized Cat excavator, you'll find that you won't have a lot to brag about. Some guys reading this are real operators and those guys know hot air when it blows over them.
i would do anything to work on one of those
I would sperate one now
Watch Identical Twins on a Bobcat!!
See it on The Twin Channel!!
sorry ass, im not an expert, i might have mistaken it for another peice of equipment such as a D11N or a Komatsu.
I said it once, and I'll say it again.....there ain't NOTHIN' like a Caterpillar engine!!
do you mean 30 gallons an hour? My old D6N used four an hour.
What do you suppose he has on his ipod?
i agree with u 100% on that
Nice push!
Nice Dozer Videos
real monster!
waouuu!!!big!!!
How often do the air filters clog?
This is for moving mountains
I feel like pushing some dirt now
How many horses does the D-11 have?
nice!
Isto é que é máquina!!
I meant to say 'bet', not 'be'. Oops!
Where are the D2`S at?
D11 = Boss.
shes not even smokin, that thing must be like brandnew
i was just there a couple days ago :) lol they are a year old i think but im not really sure...
@ovis86 its not everything its cracked up to be fun for the first week and you start to hate life after that
@ovis86 no you wouldnt, take my advice, its very heavy.
Good
cat power!!
thats a big kitty..
@disturbed57 WHAT DOES FML MEAN?
cool
thats the kinda work i want to do
Damn right!
A D11R is a carry dozer, load the blade and raise slightly and carry the load to where ever, if i was the owner of that machine id have him turfed off it right now, all the wear and tear on the undercarriage loading up the power train when you don;t have to and wearing out the GET. (GROUND ENGAGING TOOLS) .
Uhh.. Work on or operate one..??? Sorry but that could mean either..
a d11r will owen komatsu any day
good blades worth
So what's the difference between you and him? you sound like a younger version of him. No argument about the machines, though. Cat rule
850 HP at the flywheel
I'm with you there, bro, but you missed out the most important - don't believe everything you read on UA-cam. When do we get to see a vid of you working? I'm sure it'll be an education for all of us.
a 450 john deere in fourth gear will roll faster than 357 cat skidsteer
they are so slow,just pushing gravel.
cat are the best
straight pips
Dual Exhaust.
giant machine
me too ;D
Call me crazy, but I'll be dollars to donuts that not ONE of you last three commenters are operators. Or if you are, you don't have much time in the cab. And by the way, we are not called 'drivers'.
That machine was not 'struggling' as much as it may appear to y'all.
Throttle back, fella, before you burst a hose. You're taking it all too seriously.
I came here from Shit can happen D12 lool
lol they never built a d12r theres only d11rs
k**** ale to ma moc !
100 problemas de forca e ainda descendo o morro
love deisel power