I work for a CATERPILLAR dealer in Eastern Kentucky. That is a D11R, We have one in the shop now doing a CAT Certified Rebuild on it. I am currently building the operator compartment also know as the cab.
Fort Mac will get -40 and colder in February,when I was there in 08 we had to shut down a couple nights cause it was close to -50 C,the company policy was not to operate the equipment below -40 to cut down on breakage from the cold
thanks. I finally found a complete dyno sheet from CAT for the ACERT C32. This is the motor from the D11T, not the D11R or N. It makes 935 gross hp and 4417 ft/lb of torque
@SecularTechnology 935 GROSS HP, 850 NET HP. The 850 rating is after the flywheel, whereas the gross rating is before. Flywheels, torque converters, etc. eat up a lot of power. BTW, Cat offers multiple configurations of the C32, ranging form the 935 HP one in the D11 to a 1350 HP one used in some of the large mining trucks. Again we're talking gross hp here.
D-11 You sure can hear that 3500 series Cat motor sound just like they bogging down but you watch and the track's are spinning.. I notice that on our 1st D-11 you think the motor need's more power but if it spinning it's track's it doing it's job..
@SecularTechnology johnnycagetheboss was talking about torque to the ground, which takes into account gear reductio/torque multiplication. Of course it doesnt make 220,000 ft/lb at the flywheel. In point of fact, the C32 makes 4417 ft/lb of torque. You might want to research things a little more carefully before you start correcting people. Somewhere on its website, CAT has a complete spec sheet (HP and torque) for all variants of the C32. Check it out.
My gosh.....thats a big machine.Ive seen eights and nines at work but those 11,s are a mighty big crawler.Anyone know the price tag on one of those babies?
Cat challenger line of tractors are made in italy spain and there about.They dont make them they just buy them and put their name on them.Maybe they should stop the line from spain.
Jobs in Nova Scotia??? Not too many good jobs around here. That is why most Maritimer have to pack up and head out west to Alberta. Out there jobs are plentiful and the money is good. Nova Scotia just a nice place to live after you retire.
Nice video. I like watching those big dozers and any earth moving equipment.
I work for a CATERPILLAR dealer in Eastern Kentucky. That is a D11R, We have one in the shop now doing a CAT Certified Rebuild on it. I am currently building the operator compartment also know as the cab.
Man, you must have your fav tunes playin on that long haul..
thx a lot for posting that vid and form filming out there in the cold.
I've done it for a long time and it don't bore me.
Fort Mac will get -40 and colder in February,when I was there in 08 we had to shut down a couple nights cause it was close to -50 C,the company policy was not to operate the equipment below -40 to cut down on breakage from the cold
thanks. I finally found a complete dyno sheet from CAT for the ACERT C32. This is the motor from the D11T, not the D11R or N. It makes 935 gross hp and 4417 ft/lb of torque
@SecularTechnology 935 GROSS HP, 850 NET HP. The 850 rating is after the flywheel, whereas the gross rating is before. Flywheels, torque converters, etc. eat up a lot of power. BTW, Cat offers multiple configurations of the C32, ranging form the 935 HP one in the D11 to a 1350 HP one used in some of the large mining trucks. Again we're talking gross hp here.
Who owns these D11's? Dexter.
lovely machine
I work for a Cat dealer in the yukon, haven't seen one in our shop yet !
D-11 You sure can hear that 3500 series Cat motor sound just like they bogging down but you watch and the track's are spinning..
I notice that on our 1st D-11 you think the motor need's more power but if it spinning it's track's it doing it's job..
you need a d11 dozer here to operate it lol
Catpillar 3412 also used in 992 and 990 rubber tired loader's
I wonder what it would sound like with straight pipes!! LOL
The 3412 is in a D10..a 3508 is in a D11.. Maybe a 3214 but I haven't yet worked on one, but have rebuilt 4 3412's in the d10
Good
You read my mind dude !
Beast!
fort mac dosent get colder than like -30 celcius and you need a class 1 licence
Would love to hit the big lottery. Purchase couple of heavy equipment, land and have some fun.
I had a BTD 20 great machine lots of levers to pull, operators are spoiled these days
I drove a TD20 years ago, if you were caught spinning tracks you were looking for another job.
@SecularTechnology johnnycagetheboss was talking about torque to the ground, which takes into account gear reductio/torque multiplication. Of course it doesnt make 220,000 ft/lb at the flywheel. In point of fact, the C32 makes 4417 ft/lb of torque. You might want to research things a little more carefully before you start correcting people. Somewhere on its website, CAT has a complete spec sheet (HP and torque) for all variants of the C32. Check it out.
WOW..I was just thinking the exact thing..play with that baby all day....that's what life is all about!!!!!!!!
John Nova
My gosh.....thats a big machine.Ive seen eights and nines at work but those 11,s are a mighty big crawler.Anyone know the price tag on one of those babies?
@c8055 That would be a hell of a dozer with an operator...
Stellarton, Nova Scotia
Easy big guy,,, Its not everyones favorite dozer...
hose and wigglys
@rocintrucker83021227
It's a 32 Liter, I think 3 pistons.
Cat challenger line of tractors are made in italy spain and there about.They dont make them they just buy them and put their name on them.Maybe they should stop the line from spain.
Super
deppends on who you work for. some companys only have operators with a CITB and some dont....its mainly comon scence though
@TheHairybaz What are slews and moxies?
@bumoffhtestreet
Really, because CAT said the C32 makes 850HP
@joerock00 You don't need a license to operate this equipment. But they do have schools that will teach you how to run heavy equipment.
Anyone know how much torque the D11 makes?? Its useless to give the hp, because a low-geared tractor relies on torque to get the job done.
where is this...fort mac
👍👏
@CATERPILLARD9L
John Nova
haha 250 000 pounds of screaming steel and sex appeal!
Halle Dekat!!!
What the hell are you talkin about?
@johnnycagetheboss
Dude buzz off. 220,000 Lb-Ft my ass. probably some where in the 3,500's
What moter is in them? 12 16 pistons?
Jobs in Nova Scotia??? Not too many good jobs around here. That is why most Maritimer have to pack up and head out west to Alberta. Out there jobs are plentiful and the money is good. Nova Scotia just a nice place to live after you retire.
tryin hard to see the production value here.better with slews and moxies
@bumoffhtestreet
Then show me the Spec sheet. Prove me wrong.
3508
@JinHowHen That is why our kids have trouble getting jobs.. Easterers come out here
and take there jobs away...