Fixing a leaky carburetor ! 2009 Yamaha TTR 125 | Float / Needle
Вставка
- Опубліковано 16 жов 2024
- Support us by grabbing your parts and accessories from AOMC.MX!
aomc.idevaffil...
Thanks for checking out my video! Please subscribe, like, or comment, and check out our gear below!
Also, check out our other channel / rtipowersports
My gear!
Action Cams
GoPro Hero 5 Black
Primary GoPro Action Cam : amzn.to/2ADAJ6M
Waterproof Housing : amzn.to/2B0Xt3n
Mount Kit : amzn.to/2kx6YAA
Battery / Charging Kit : amzn.to/2B6HY6x
Yi Lite Action Cam
Secondary Action Cam Yi Lite : amzn.to/2kvHjYW
Yi Cam WaterProof Case : amzn.to/2kvbn7a
Selfie Stick / Tripod : amzn.to/2AWnfpp
Handheld Gimbal Stabilizer : amzn.to/2BJbord
Drone
Primary Drone DJI Mavic Pro : amzn.to/2AXNXxB
Mavic Pro Battery Multi-Charger: amzn.to/2BDn3Jk
SD Cards : amzn.to/2DcU3Zn
Vlogging
Vlogging Cam : amzn.to/2Covk48
Vlogging Mic : amzn.to/2CmzRnH
Vlogging Camera Adaptor: amzn.to/2zN3N9L
Best thing I ever did was replace the stock carb with a vm24!
I've heard that does wonders. I need to try that!
I’ve yet to tune it but it starts first kick!
I have 4 ttrs 2 of which are 125’s.. 2001, 2004, 2009, 2014.. = 4 vm24’s 🤣
Kip Painter did you have to do any modifications to the carb to make it work or was it plug and play?
Heck yes! Where did get it from..Maybe drop me link? Ride on bud.
Thank you so much! This method really took the guess work out of the equation, especially with the lack of technical data available for this carb. I appreciate you making this video!
So I found a piece of debris in the needle, put it back together and it started leaking again….because I put the float in backwards!!!!!. Realized this after watching the video again …i tried bending the clip & took it apart probably 25 times!!! Thanks for sharing this.
Just bought the same bike in the 07 model. Same issue on it. Gonna start here. Thank you for the informative video sir👊
Good luck!
hey i also have an 07 and i have the same problem rn did it work for you just wondering.
@@andersonparajon1647 yes I replaced the float and the needle valve. I had to adjust it in very small movements with the little adjustment tab on the float to get it to stop leaking and also idle properly. The Yamahas can be a bit temperamental when you start messing with this. Just make small adjustments until you achieve what your looking for.
The over flow drain hose exceeds the elevation of the fuel in the bowl.
It was probably an oversight.
Great video, the plastic part that was sitting on the bottom does it have to sit at a certain height on the needle? Thanks
Dude life saver that was super easy after watching
Welcome buddy!
Where does the needle spring go? That’s the only part i’m stuck on
Awesome trouble shooting and fix video! Thank you for uploading!
I'm 5 years late but where does the fuel overflow valve lead to? Its the see-through red tinted wire that goes from the fuel bowl towards the engine I believe. Just unsure if it actually connects to anything as it drips gas while I'm trying to get my bike started
Can you please do a video on removing the whole carb?
Hey man so my dirtbike is leaking gas from the carburetor so i opened the carb up and the carb wasnt dirty and the float valve wasnt stuck. Any ideas??
Float needle is not sealing around the seat.
Huge help - Thanks for posting!
Turns out our float valve isn't letting gas in to bowl, the gas come directly in thru a non threaded hole almost below where gas tube enters carb ?
I did this but it doesn't turn on need help?? Please
My gas was coming out of the holes that was connected to the carburetor the holes had a crack in it and gas was coming out I replaced the holes that was cracked and it still won’t start I was riding it the gas start coming from the holes that’s connected to carburetor so I don’t understand why it want start back up after that fix
So like if my bike is pissing gas it's the float or needle? Cause I'm finna throw the bike away. I've even rebuilt the carb but never played with the float
Did you ever put vm24 carb on because I was gonna order it but it seems like it’s only for the older model ttrs and I have a 2009 ttr 125 with different throttles.
Nah I never have...these are customer bikes.
You shouldn't have to adjust float height to make it quit leaking. You should clean needle and seat and put back together and try it. All you did was make a lean condition.
Thanks Rigguy!
Are there any videos you recommend? becuse this is the best video i have found so far
@@Musalini-oq7bu as far as the TTR 125 or 90 go, this about it. If you have a CV carb like this one, I suggest just making sure you don't have any vacuum leaks or the slide won't work properly as it works off vacuum. These carbs are very temperamental but if you keep them stick with genuine parts and keep them tuned in you can't lose. Hope that helps.
@@Musalini-oq7bu Don't buy any Chinese carbs. Stick with stock.
@@Musalini-oq7bu watch Lund MX
I bought my ttr brand new and of course it’s stupid lean. That white round peice u put on the main jet was just sitting on the bottom of my carb. Are they suppose to be there or?
Yessir!
I don't think it goes where he put it in the video the parts microfichefrom Yamaha shows it sits in the bottom not where he put it. been working on one that was where he put it and it would run on choke only but backfired and sputtered and when I put it back in the bottom of the bowl like that one was and like the microfiche calls for it ran fine. who knows
Did I mute this
I just picked up a ttr125. Started leaking after the first 5 min ride. I bent that tab up just the slightest bit, after putting it together bike wouldn't start. Might just buy a new carb, only $50 and rebuild kits are $40
I'm haven't ng the same promblem too
Dude awesome video..
We're does the clear tube go it leaks from there like crazy
To the bowl overflow
Anyone know what model of carburetor this is
no
vm20
Thanks it worked
Welcome Andy!
How many times do you turn the idle screw
As many as you need to get it idling properly. I usually go half-turns at a time.
helped alot thank you
Welcome bro!
Le batallamos para llegar asta aqui
I’m currently stranded
This guy doesn't fast forward anything lol