Water pump using marbles. How to make your own.
Вставка
- Опубліковано 16 бер 2021
- Make your own extremely cheap and simple piston pump for pumping water using PVC tubing, marbles and a few basic tools. This pump operates without any electricity.
A building manual is available in dutch:
www.wot.utwente.nl/publicatio...
If you have further questions or if you want to know more about similar technology please place a comment below or take a look at our website:
www.wot.utwente.nl/en/ - Наука та технологія
Congrats, this is how the Chinese used to build bamboo irrigation pumps and how the typical pumjack (Jaknikker) works. Tubing pumps are quite elegant in their simplicity, and have been the preferred way to bring oil and water to surface everywhere. Thanks for the awesome how-to!
in post production, if you'll cut out the midrange audio, and just keep the high and low frequencies the audio will be much more discernable when filming in an echochamber
My type of guy! look at all the beer bottles!
Love your vids. Have downloaded the PDF's
Video makes me think that PVC primer is a scam. Cause this guy just uses glue.
it makes a small pump for cleaning bilge water and rain water in small boat and kayak. it fits into small gap while you have a lot of this and that in storage.
Fascinating! Thank you!
Brilliant, thanks man for sharing.
Another great video. Keep it up! Subscribed.
"one or two times' - hits punch 7 times 😂
Cool DIY ball valves. Can make the check valves for ram pump with this method too! 😁
Very Nice!
thank you so much
thanks for the info on fitting together pipes, and using marbles and rubber from a tire for the pumpiing action. If I may, you should wear gloves(nitrile) whenever working with any chemicals. they can absorb through the skin and enter your body, similar to sniffing the glue. peace, and safety first
Would help to have a schematic drawing of the positions of the main valve. Were there two marble valves positioned in the same direction or in opposing directions?
Thanks for your videos. I am Just curious, How deep did you have to well to get water?
Hi. Thanks for amazing video. I wonder where can I buy that rotary joint that connects with the drill. I hope I don't need to go to AMsterdam to buy this. Thanks
Great stuff and very informative. Can you type the manual in English?
When installing this type of pump in a well. How would you secure the "casing" in the bottem of the well?
hi love the project but does the pump need a lot of service like are there any parts that are susceptible to wear like the marble valve
think about it
If you are pumping water with mud and silt, the tire seals will probably wear out at some point
can you make a 2d drawing for this pump?
Would a PVC cutter work instead of a saw for cutting the PVC?
Hi Tony, a PVC cutter will probably work just fine. Possibly the cuts that only go halfway through the pipe to make the indent might be a bit more challenging with a pvc cutter, as you might overshoot,
Please fix your audio i really want to hear you better.
You didn't clearly illustrate the orientation of the marble valves.
Easy, the parts with the indented shapes go in the direction of the water flow. ✌️
5:00,
Want to make a PVC pipe smooth? Grab a lighter :)
Be careful not to set it on fire though. Poly vinyl chloride smoke is TOXIC!
Seems like to much work so Home depot 38$ : )
It’s amazing how many Netherlanders there are making useful creative projects . Particularly water pump projects. Could this be in the DUTCH- DNA - having stolen lands from below sea level . 😉 thanks brother 👣🦘🇦🇺🍻