Challenger Shortened Sway Bar End Links

Поділитися
Вставка
  • Опубліковано 5 вер 2024

КОМЕНТАРІ • 25

  • @hendersoninletcrayfish3730
    @hendersoninletcrayfish3730 5 місяців тому

    Thanks!!! Ran into the same issue. Great video!!!

  • @frankmarzullo8322
    @frankmarzullo8322 3 роки тому +1

    Thanks brother! always detailed, always informative. saved me a ton of time and hassle. I appreciate you sir!

  • @donwolfjr1
    @donwolfjr1 5 років тому +2

    Pretty cool!! Although, I was I was hopin to see the cutting and welding of the end links!! Lol. Good video!!!
    Don W., TX

  • @Clutched392
    @Clutched392 4 місяці тому

    Question. I bought rear sway bar end links that are 2 inches shorter than stock. I am also on 2 inch lowering springs. Will this affect clearance with the hub at all? Just curious before I install them.

  • @350Zquicksilver
    @350Zquicksilver 3 роки тому +1

    Great video! Thanks for sharing...

  • @baggedchallenger
    @baggedchallenger 5 років тому +1

    I lowered my challenger and now it makes clunks noise.. Do I need to get new sway bar end links and also have it shorten too? I find any adjustable that's why.

  • @osamabakhsh4196
    @osamabakhsh4196 Рік тому

    If i get lowering springs would i need to do that for a 17x9.5?

  • @seanpetersen5553
    @seanpetersen5553 9 років тому

    Nice video. Very informative

  • @GamingwithGamerGirls
    @GamingwithGamerGirls Рік тому

    Wouldn't it be better to install wheels with the proper offset or use spacers?

  • @tacpirate4447
    @tacpirate4447 7 років тому +1

    would spacers not be a quick fix?

    • @SpeedysGarage
      @SpeedysGarage  7 років тому +1

      Hell no. Not on a drag car that sees close to 130MPH.

  • @TheRealDukeSkywalker
    @TheRealDukeSkywalker 7 років тому

    Great vid man. I'm looking at 17"s too. Question though. Wouldnt buying an extra pair of already shortened end links be better? I would imagine with a portable compressor and some aor tools you could swop these out in 15 mins. I would just hate to alter the geometry of the suspension. Any thoughts? Also, what hoosier tires hook the best on 17x10's? Thx

    • @SpeedysGarage
      @SpeedysGarage  7 років тому +1

      I've not noticed any difference driving the car and I've got enough going on at the track to fool with end links. You can certainly buy a second set though as folks like HHP offer them pre-modded. I use a Hoosier slick 28x10.

    • @TheRealDukeSkywalker
      @TheRealDukeSkywalker 7 років тому

      Speedy's Garage thanks for the reply. Hey, do you have any opinion on using the oem oil filter for the hellcat or the srt viper filter which is supposed to be more high flow

  • @hgru5359
    @hgru5359 5 років тому

    i know this is a old video but i was wondering if you remember how wide these slicks were. I am looking at 315 Nt05Rs on 17s for my 2012 r/t and dont know if they will fit

    • @SpeedysGarage
      @SpeedysGarage  5 років тому

      The slicks are 28x10.

    • @hgru5359
      @hgru5359 5 років тому +1

      appreciate it man love the vids!

  • @dodeberry2675
    @dodeberry2675 8 років тому

    I had eibach pro kit lowring sprind and anti sway bar front and rear do i need the shortend sway bar end link to run the weld wheel 17 by 10 on the rear ??

  • @Mr-cf1go
    @Mr-cf1go 4 роки тому +1

    I put on a 17x9.5 drag star and did NOT have to do this.

    • @SpeedysGarage
      @SpeedysGarage  4 роки тому

      Mine are 17x10, with a different bs so these need it.

    • @STANS392CajunBoy
      @STANS392CajunBoy 2 роки тому

      I put on a set of 17 x9.5 Race Stars and M/T 305 45 17 DRAG Radials on my 2021 1320 I didn't have to replace the end links but I now have a set form HHP that ate 1" shorter will they help or do anything to improve anything?

    • @just_a5.7
      @just_a5.7 Рік тому

      @@STANS392CajunBoy did u ever find out cuz I Wana get some 17x9.5 race stars