UKU CONTROLLER INSTALLATION

Поділитися
Вставка

КОМЕНТАРІ • 25

  • @robertrivera4743
    @robertrivera4743 Рік тому +4

    any videos on wiring up the ext box for models of 9kw?

  • @malibo2627
    @malibo2627 2 роки тому

    Hi, this is a great product!!

    • @huumsauna
      @huumsauna  Рік тому +1

      Hey! Thank you so much! :)

  • @PumpiPie
    @PumpiPie 2 місяці тому +1

    Possibal to connect it to a 230V 3 fase??

  • @stevieg7403
    @stevieg7403 Рік тому +1

    What happens if the cables don’t have the same cross-section?

  • @ScottNash11-11
    @ScottNash11-11 Рік тому

    This is great, but I it could be even better if it included the UKU extension box too, since a lot of buyers will be needing help with that and the print instructions are a bit overly simplistic.

    • @huumsauna
      @huumsauna  Рік тому

      Thank you for your feedback!
      We will consider this in our new videos!

  • @antonrussell2573
    @antonrussell2573 Рік тому +3

    Why does it cut out at 5:59 when the heater is being connected to the board?

    • @PumpiPie
      @PumpiPie 2 місяці тому +1

      Because he is doing it wrong xD

  • @nickfarrell429
    @nickfarrell429 Рік тому +1

    Do you have to have a door sensor installed for the Wi-Fi version to work?

  • @stevieg7403
    @stevieg7403 Рік тому +1

    Can both of the control unit be placed outside of the sauna open to the elements?

    • @huumsauna
      @huumsauna  Рік тому

      Yes, both of these can be placed outside of the sauna, but we do recommend making a small shelter for the main module :)

  • @milaharvell986
    @milaharvell986 Рік тому

    Hello, is the door sensor necessary to install for the Huum to function? Can it be omitted? The temp sensor inside would be installed.

    • @huumsauna
      @huumsauna  Рік тому

      Hello! The door sensor is one of the safety precautions that must be mounted. Note that the door sensor must be installed as shown in the manual.

  • @lilman2514
    @lilman2514 2 роки тому +3

    Is there an explanation for wiring the power sources

  • @antonrussell2573
    @antonrussell2573 Рік тому

    at 5:26 is that the thermostat on T1 n T2 and the door sensor on 01 n 02 ?

    • @huumsauna
      @huumsauna  Рік тому

      Hey! Please write to our support - support@huum.eu

  • @kirpaS
    @kirpaS 2 роки тому

    Is the temperature sensor waterproof incase the sauna gets wet from time to time?

    • @huumsauna
      @huumsauna  Рік тому

      Hey! It is moistureproof :)

  • @HeistMonkeys
    @HeistMonkeys Рік тому

    I’ve emailed the company looking for an answer and no reply. Is the UKU temp control functional in an outdoor setting that gets rain

    • @huumsauna
      @huumsauna  Рік тому

      Hello! Yes, it is functional :) For further questions write to our support - support@huum.eu :)

  • @DanielWBates
    @DanielWBates 2 роки тому

    Why on God's green earth would you have a sauna with a glass shower door and a 3" airflow gap?

    • @huumsauna
      @huumsauna  2 роки тому +5

      From an energy consumption point of view, yes, a glass door is not optimal. Glass door though can be an aesthetic thing. Also it gives some level of safety, as you can see through it and be aware if people on the other side of the door are OK.
      If the sauna has well-designed ventilation, then the air gap is not needed, but most of the saunas lack ventilation. As they say, you can't have too much fresh air in the sauna. Without enough fresh air, you will get a dizzy head and the sauna session is not as pleasant as it could be.
      We wrote a blog post about ventilation: huum.eu/blog/guides/ventilation/