I Made a Jøtul 602 N Refurbished. Install of burn plates. Detailed clip.

The stove is " Made in Norway " by the famous Jøtul ...Jotul as you say in english. This version is 602 N. Almost the same as 602 with no number or letter...the classic one. The nut and bolts are placed some a little different on this one, and the form of the end wall and front wall has some different connections slides. You cannot mix the parts of those two modells..except the outlet for smoke and the cooking plate which is 24 cm diameter.
This one has a kind of " hammered " finish and is green enameled. Using stove cement in the plate joints. Long and extended film for those interested.
The stove delivers about 7 kwt. The most sold and copied box stove in the world !

[@lassila3]

Very nice. I aleays want to replace my electric heater with a wood stove in my workshop.. this is a good kind that warms a lot :-))!!

[@christophertiredofbs8514]

Next time try using some cutting oil with the drill bit and the tap

[@betfuryboss7700]

i bought one of these yesterday for 200$ your about the only person i can find with the same one 602 N

[@motordiverse1276]

Common in Norway. Ok. Good luck. ! :-)

[@SeeMooreVids]

I’ve got a 602N with a secondary burn plate which is toast along with the inner panels. I’m going to eliminate the secondary burn plate and cast iron inner side panels opting for fire brick all around.

[@motordiverse1276]

The Baffle is needed to guide the smoke in a half sircle before it leaves out the chimney or exit. I guess you can make a partly functional one with vermiculite or chamot

[@SeeMooreVids]

You performed a super rehab. 👍

[@motordiverse1276]

Thx allot ! :-)

[@SeeMooreVids]

Nice job.

[@motordiverse1276]

Thx 🙂

[@cathalbrady3918]

Thanks, very informative. What is the black paste that you used on the hotplate?

[@motordiverse1276]

Hey ! Stove pasta from www.biltema.no , but that tube version is no longer on marked. Replaced with new on. Every stove boutike/store, sell stove crem..or pasta... Many tupes on marked !

[@ogreunderbridge5204]

Huh,,, So, those outer tracks was NOT for a glassfiber wick kind of deal as I shopped for... I once glued some flue adapters together with that 1500*C Biltema Brandmassa. They stuck for good :D . Will that stove ever be able to be disassembled again ? Edit; Why did you split the door gasket wick into two parts ?

[@motordiverse1276]

Good question. I guess it was somhow broken or half gone...so i made it in two part to avoid the broken part of the rope... :-)

[@betfuryboss7700]

but mine says jotul beside the 602 n mines old old

[@bjrn-erikmichalsen2825]

You have the wrong side plates. You should have played with three holes

[@motordiverse1276]

Thats wrong. You have old style burn plates and you have new ones... Ok

[@bjrn-erikmichalsen2825]

@@motordiverse1276 but if there is three pegs it should be plates with three holes too..?

[@motordiverse1276]

The back pigs are for the smoke plate that lay above...guiding the smoke front and back...and out chimney...@@bjrn-erikmichalsen2825