Somebody was like I need to be able to take my bandsaw with me where ever I go!! 😁 the problem solving/troubleshooting, creating I admire so much, awesome.
@ I'm a carpenter, I'm not being a smartass. I couldn't make out the utility of the jig.
Рік тому
@@bobcougar77 ua-cam.com/video/N8ZEQQw5T8A/v-deo.html The advantage of the jig and its comparison with the cuts made without the jig are clearly shown here.
I've owned my crappy RIGID jigsaw that bows all the time when doing curves, that I don't rarely use it but will never sell it. Thank you for sharing your jig design.
A normal blade bows if pushed sideweys, and more so one slim made for curves, not much difference on the tools and brands used, yow can use the best Festool trion, or old Bosch GST 135, 120, a little better then GST 90 but not enough. The only one that's something else is Mafell P1cc that has no roller but get the blade more close to the stuff you cut, but is better only if you use special Mafell cunex blades that are thicker, double the thickness and wing shaped. Those can cut straight but work only with the Mafell P1cc that can also use normal blades.
It sucks not being able to save shorts. Sometimes I'll send the link to myself on a messaging app with a description so I can search for it if I ever remember to go back to it. Maybe try that
Дрочево, одним словом. А ещё, для тех кто пользуется электрическим лобзиками, есть хорошие пильные полотна и правильно выбранная(в зависимости от мощности лобзика) скорость пиления. А если уж под рукой, нет достойного аппарата, то необходимо наличие прямых рук и умение работать с тем, что есть..
I think it all depends on the measurements of each jigsaw in particular. The video should be used as reference (from where the measurements come from for each wood piece). Im planning to do this one, and im in the planning stages, so if you happen to have a Stanley STSJ0600 jigsaw, i could share the pdf plans with you once its done ^^
Sanki makineyi vida ile sabitlemeden kızakta tutarsan kayma yapar gibi görünüyor
Рік тому+1
Naci Bey makinanın kayabileceği herhangi bir yer bulunmuyor. Dilerseniz videonun uzun versiyonunu linke tıklayarak izleyebilirsiniz; ua-cam.com/video/N8ZEQQw5T8A/v-deo.html
@ hobi amaçlı ugrassanızda fazlasıyla profesyonel işler çıkarıyorsunuz, tebrik ederim 👏 Ben hobi amaçlı uğraşıyorum ama sizin yanınızda epey amatör kalıyorum ☺️
He shows you at the end? He made a perfectly square curved cut, the jig saw didn’t wobble, or cut different degrees off square because the jig saw stayed square to the surface.
Somebody was like I need to be able to take my bandsaw with me where ever I go!! 😁 the problem solving/troubleshooting, creating I admire so much, awesome.
Excelente video, gran ayuda, un accesorio fácil de hacer, barato. 🇲🇽
Maravilloso!!! Sublime cómo siempre maestro!!! Saludos desde México
Interesting
Holly shit a tool jig short thats actually usefull
This guy is soooo clever and no fancy tools to get the job done 👍🏻 like
Muito bom, uma solução prática, eficaz e barato. Saudações do Brasil 🇧🇷🇧🇷🇧🇷👍🏻👍🏻👏🏼👏🏼
Interesting
OK, this is a good idea. Nice ingenuity
I don't get it. What does the guide do that ajigsaw without it can't?
Have you ever made a curved cut with a jigsaw?
@ Yes
@ I'm a carpenter, I'm not being a smartass. I couldn't make out the utility of the jig.
@@bobcougar77 ua-cam.com/video/N8ZEQQw5T8A/v-deo.html The advantage of the jig and its comparison with the cuts made without the jig are clearly shown here.
@ thanks, I'll check it out.
Very clever using the jigsaw to make the jigsaw guide.
Super bueno, para cortes mas perfectos. . .felicitaciones excelente accesorio
fantastic tool Zilgiba...
Espectacular 👍😉
Good . The jigsaa is the most frustratingly annoying power tool of all for running straight and true
I can barely use the tools I buy let alone make them. Impressive!
Videos paso a paso
بارك الله في عقلك
Sick, i can make one of those with my band saw
Interesting
Not on a large piece or one that isn’t mobile…
Как всегда здОрово 👍👍👍🥰👍👍👍🇷🇺привет из России. С любовью.
Interesting
Wonderful! Would you happen to have a drawing of this to share?
You can watch full version here and you can find the measurements at the end of the video: ua-cam.com/video/N8ZEQQw5T8A/v-deo.html
Thank you!
Thank you bro you ROCK! Using what little you have to make it happen….
Looking forward to a long version
You can watch full version here: ua-cam.com/video/N8ZEQQw5T8A/v-deo.html
@ thank you!
Interesting
@@uniqueterrazzoiNtErEsTiNg
Good job done love you and your work
This is the way to make a corbel cutting saw...like an Oliver portable band saw...needs a much bigger throat and longer blade..
Very smart! Fantastic!
❤très très bonne idée bravo 🎉🎉
You turned it into a portable scroll saw
Wow. Now I've gotta look up what is a scroll saw.
It needs a deep throat...to cut 4 inch thick beam ends..
Somehow you didn't need a jigsaw guide to use the jigsaw to cut out your jigsaw guide. How the fuck about that
This is a guide for curved cuts.
Should have sold this idea to Kreg so they could make it from plastic and charge $100 a pop for it. 🤣
They already have one similar lol and not quite 100 but like 70$... Still nuts
Great 👍
Right on brotha!
O miserável é um gênio!
Чёткая штука, оформленная в фанеру.
Super portable scroll saw
With a stronger blade.
I've owned my crappy RIGID jigsaw that bows all the time when doing curves, that I don't rarely use it but will never sell it. Thank you for sharing your jig design.
A normal blade bows if pushed sideweys, and more so one slim made for curves, not much difference on the tools and brands used, yow can use the best Festool trion, or old Bosch GST 135, 120, a little better then GST 90 but not enough. The only one that's something else is Mafell P1cc that has no roller but get the blade more close to the stuff you cut, but is better only if you use special Mafell cunex blades that are thicker, double the thickness and wing shaped. Those can cut straight but work only with the Mafell P1cc that can also use normal blades.
Super👍👏
"Amazing jigsaw guide"
Proceeds to make straight cuts with the jigsaw and no guide.
That good ol' Ridge 💯
Edit: that was Dope af! 💯💯💯
Elinize sağlık...
Interesting
Pretty cool.
Wish I could save this video.
It sucks not being able to save shorts. Sometimes I'll send the link to myself on a messaging app with a description so I can search for it if I ever remember to go back to it. Maybe try that
Про маятниковый ход пильного полотна слышал что-нибудь? Как поживают твои подшипники после распила?
Там ни подшипник ни бронза не выдержит ,Я так думаю ,,
А маятниковый ход нельзя отключить?
@user-kb4mu6jz8f похоже, что некоторые никогда не видели лобзик 😂😂
Дрочево, одним словом. А ещё, для тех кто пользуется электрическим лобзиками, есть хорошие пильные полотна и правильно выбранная(в зависимости от мощности лобзика) скорость пиления. А если уж под рукой, нет достойного аппарата, то необходимо наличие прямых рук и умение работать с тем, что есть..
wonderful !
Very clever!!
It's nice of you to give the link to the full video in replies, but it would be more convenient if you gave it in "Description".
Thanks
Ain’t nobody got time fa dat…
Can you give us measurements so we can make this.
I think it all depends on the measurements of each jigsaw in particular. The video should be used as reference (from where the measurements come from for each wood piece). Im planning to do this one, and im in the planning stages, so if you happen to have a Stanley STSJ0600 jigsaw, i could share the pdf plans with you once its done ^^
why non dont prepara this and sell it
Купи фиолент 720,и не парься
Да идея отличная негнёт полотно
O love my old school jig saw use it all the time...I LOVE this video...BUT U MOVED TO FAST..lolololol
Sanki makineyi vida ile sabitlemeden kızakta tutarsan kayma yapar gibi görünüyor
Naci Bey makinanın kayabileceği herhangi bir yer bulunmuyor. Dilerseniz videonun uzun versiyonunu linke tıklayarak izleyebilirsiniz; ua-cam.com/video/N8ZEQQw5T8A/v-deo.html
Stajyer olarak yanınızda yer var mı ders alsam sizden ☺️
Maalesef ☺️ kendimi ders verecek konumda görmüyorum, ben sadece hobi amaçlı bu işlerle uğraşıyorum, kendimi bir uzman olarak görmüyorum.
@ hobi amaçlı ugrassanızda fazlasıyla profesyonel işler çıkarıyorsunuz, tebrik ederim 👏 Ben hobi amaçlı uğraşıyorum ama sizin yanınızda epey amatör kalıyorum ☺️
Привет из России!
Why?
Have you ever made a curved cut with a jigsaw?
He shows you at the end? He made a perfectly square curved cut, the jig saw didn’t wobble, or cut different degrees off square because the jig saw stayed square to the surface.
Since 1st of January 2023 UA-cam will not allow anymore the usage of the word "amazing" in the video titles as it has been (mis)used to often.
Please and thank you
Also, this comment is amazing