0:12 Never use the fence when doing these cross cuts, or: 1: use fence for cross cut, 2: get smacked in face, 3: find mirror and pry wood from face, inspect damage.😊
Once again Master Sh you hit it out of the ball park!! All excellent idea's!! One concern though, you are not very careful around the tablesaw. When making the runners to sit in the miter track, you grabbed the piece of wood at the back of the blade while it was still spinning. Your jacket cuff could have easily gotten caught in the blade, pulling your hand and wrist into the spinning blade. You could lose a finger, use of your hand or cut a main vein in your wrist. We love your videos, and want you to keep making them, but please, use safe practices around your machinery. We don't want anything to happen to you. After 50 years of woodworking, I have seen some horrible accidents from men who are not as careful as they should be. Take care Sir.
Hello, thank you so much for your concern! I'm trying to be more careful! And after your comment, I will be even more vigilant! Once again, many thanks for the kindness and happiness to your loved ones!
Great advice, of which I feel will be greatly accepted by this talented man. Being safety conscious is huge with table saws, as I learned the hard way, when I attempted a sketchy technique on the table saw. Fortunately only cut the end of one finger off, down to the first joint, and sheared the ends on the others. Brave and stupid. I'm an EMT, and quite engineer-minded, with an extreme high tolerance for pain, so I'm prepared to suffer the consequences, lol. Following that mishap, I created some nice push sticks, as it taught me a valuable lesson, as well as a heightened respect for this very dangerous piece of woodworking equipment.
For me, a continuously adjustable tool for calibrating long round rods (approx. 1m) would have been useful when I needed such round rods to be able to join pipes together. The problem to be solved here is the continuously adjustable, safe guidance of a virtually "endless" round rod before and after reducing the diameter. If the round rod is guided diagonally over the saw blade of the circular saw, the additional drive of the round rod can be saved under certain circumstances. But thanks for this video!
I like to show these videos to my construction students on how to NOT use a table saw. Never ever stand in line with the blade and always push the wood between the blade and the fence. It is what push sticks are for. This guy will someday suffer a bad kickback accident one day. Don’t use a table saw like this kids.
I agree with the last comment about unsafe practices. Using a sander without dust collection and on MDF is just madness. To those who wished this guy good health, he is going to have to be very lucky. It won't be long before he loses a few fingers, and he is certainly going to have lung problems.
Cutting long boards using the fence is a big no no. Doing it with your hands is just wishing the board will flip and pull your hand across a blade raised much higher than it has to be.
@@MA-SH The speed of the video doesn't change my perception of the danger, as I've been the victim of my own creative mishaps, lol. The table saw almost claimed the fingers on one of my hands, with one cut completely off, to the first joint on my index finger. It was a daring attempt, and proved by the consequences. I would hate for you to get your hand caught between that fence and the blade, so PLEASE do yourself and your viewers a service by using a push stick. My own advancement and knowledge of woodworking has given me a great appreciation of the art and craft, of which I enjoy immensely. I'm an EMT also, so I'm fully prepared to suffer the consequences of shortcuts and irrational thinking. I've taught my own three US Marine sons the art of woodworking.
estou encantada com seus projetos, especialmente o jig para fazer pé palito. Vi vários tutoriais e esse é de fato o mais eficiente deles, simples e de fácil execução. Sou grata por compartilhar suas ideias. :)
Аккуратная работа и креативные идеи! Правда смотрел и думал - имея такие инструменты, можно было и станки токарные и шлифовальные недостающие купить 😂 но как пример когда нужно срочно какую-то приблуду - отлично.
7.36, Have the holes all line up with one edge of the top piece of wood, Then you only adjust the other side to select a hole. And only 1 screw is needed to hold the moving piece.
Здравствуйте!🤝с наступаюшим новым годом вас!здоровья,радости,успеха!море позитива,развития каналу,много подписчиков!и конечно новогодний,жирный лайк 👍!🎉🎉🎉
1. the tapered leg jig is ok, but straight dowel jigs are inexpensive and work well, i dont see the need to fabricate a big clumsy jig for it 2. no one needs a drum sander without dust collection 3. i realize MDF is popular because of a couple favorable qualities, but on balance it sucks: (a) it puts toxic formaldehyde into your indoor air just sitting there (b) it puts very fine toxic dust into your air when you machine it, and (c) it wrecks every cutting edge that touches it especially painful to see a router taken to it use high quality plywood or solid wood and make better stuff
Nice video and fantastic problem solving! Woodworking, be it fine instruments or large structures is all about coming up with jigs and tracing shapes! Some more views and you can crowd-fun an actual turning lathe =)
das sieht immer so leicht aus passt immer und immer sehr genau nun lieber alexander wünsche ich dir und deiner familie einen guten rutsch , ein gesundes glückliches neues jahr liebe grüße sendet dir waldemar aus deutschland
Video starts with a sure fire method to cut off fingers quickly. Please do not watch or follow anything in this video. Not everyone who creates these videos actually have any real practical woodworking skills
Moin. Ich verstehe nicht, was der Mann da ab 8:35 mit der Oberfräse macht. Ich sehe keinen Anschlag und kann nicht erkennen, was für einen Fräser (Kugellager?) er benutzt. Könnt ihr helfen?
Hallo, ich kann Ihnen helfen) Dies ist ein gewöhnlicher Fräser ohne Lager, ich mache es ohne Anschlag, indem ich mich auf meine Erfahrung und Vision verlasse 👀
If you see something unsafe, you should use this as an educational opportunity to protect the maker and viewers instead of just making vague accusations. In general it was well thought out and safe. Two points though: you didn't use a push stick on that narrow cut at 0:33 seconds. You created a missile just waiting to kickback. Also no emergency shut off on the drill/drum sander can be dangerous if some hair or clothing got caught up in it. Just some food for thought!
Без чертежей или хотя бы размеров довольно бесполезный ресурс. Я предпочитаю подписываться и ставить лайки на каналы, которые предлагают больше подробностей для изготовления таких приспособлений. Причем таких каналов довольно много. Вот за ними и стоит следовать.
Я на 100% уверен что вы не чего делать не будете хоть с чертежами хоть без них! Так как я импровизирую , чертежи не использую так как нет у меня их))! Также как вы где увидел и на свой лад смастерил, и не думал о чертежах)
@@MA-SH Делаю и с чертежами, и без для своей столярной мастерской, но зачем изобретать велосипед, если некоторые сайты предоставляют чертежи. Сложные инструменты покупаю на АлиЭкспресс, но стараюсь сделать некоторые инструменты своими руками - процесс изготовления и результат приятнее. У меня частный дом с хорошо оборудованной мастерской и доступными материалами - вишня, грецкий орех, абрикос, шелковица... Есть дубовые и сосновые пиломатериалы. Так что о 100% не нужно свистеть. 100%-я уверенность - это отнюдь не положительное качество, а признак ограниченного человека.
Neat ideas, but surprised you have all 10 fingers left. That table saw is going to get you eventually if you keep running your hands so close to the blade. And kickback is a bitch.
Eso de hacer tubos de madera , si ya los venden hechos , se pierde mas el tiempo haciendo su taaaaan ingenioso mecanismo , que en ir a comprarlos a home depot 😂😂😂😂😂😂
Nice woodworks, but only --all that unsafety at work indeed NOT adviceable. Just do it at your own expense if you may, but please do not teach (or learn!) unsafety.
Сначала надо показывать готовое изделие, и для чего оно, и только потом медленно и долго процесс изготовления. А то приходится смотреть на двойной скорости.
0:12 Never use the fence when doing these cross cuts, or: 1: use fence for cross cut, 2: get smacked in face, 3: find mirror and pry wood from face, inspect damage.😊
Ok 🆗 thanks
As a carpenter let me tell you, that if you try this it will literally change your life forever, since you will be missing at least one bodypart
Thanks for the kind words, I feel sorry for your body parts 😳
@@MA-SH 5:04 5:10
Might be one of the more ingenious dowel makers I've seen online.
Thanks
Those are all great ideas. Thanks for showing them!
Thank you friend 😊
Александр, спасибо за то, что щедро делитесь опытом с людьми, и за Ваши золотые руки!
Здравствуйте, огромное вам спасибо 🤝
Александр спасибо огромное....познал многое....А каким клеем пользовлись на видео?
При вклейке подшипников...ссылочку если можно
@@НиколайСубботин-ф6чЗдравствуйте, купил в хозяйственном магазине Эпоксидный клей холодная сварка Epoxy Metal 57 г
👍🤝👍🤝🏅👌✌✅
💝👉👈💖💞💫👑💫
🪐🪐🪐🌠🌠🌠🕊💌
@@MA-SH
Once again Master Sh you hit it out of the ball park!! All excellent idea's!!
One concern though, you are not very careful around the tablesaw. When making the runners to sit in the miter track, you grabbed the piece of wood at the back of the blade while it was still spinning. Your jacket cuff could have easily gotten caught in the blade, pulling your hand and wrist into the spinning blade. You could lose a finger, use of your hand or cut a main vein in your wrist. We love your videos, and want you to keep making them, but please, use safe practices around your machinery. We don't want anything to happen to you. After 50 years of woodworking, I have seen some horrible accidents from men who are not as careful as they should be. Take care Sir.
Hello, thank you so much for your concern! I'm trying to be more careful! And after your comment, I will be even more vigilant! Once again, many thanks for the kindness and happiness to your loved ones!
Great advice, of which I feel will be greatly accepted by this talented man. Being safety conscious is huge with table saws, as I learned the hard way, when I attempted a sketchy technique on the table saw. Fortunately only cut the end of one finger off, down to the first joint, and sheared the ends on the others. Brave and stupid.
I'm an EMT, and quite engineer-minded, with an extreme high tolerance for pain, so I'm prepared to suffer the consequences, lol. Following that mishap, I created some nice push sticks, as it taught me a valuable lesson, as well as a heightened respect for this very dangerous piece of woodworking equipment.
Thank you so much 😊
For me, a continuously adjustable tool for calibrating long round rods (approx. 1m) would have been useful when I needed such round rods to be able to join pipes together.
The problem to be solved here is the continuously adjustable, safe guidance of a virtually "endless" round rod before and after reducing the diameter.
If the round rod is guided diagonally over the saw blade of the circular saw, the additional drive of the round rod can be saved under certain circumstances.
But thanks for this video!
Hello 👋 Thank you buddy 👍
Brilliant video Brilliantly made, showing why and what for you are making the jigs at the beginning is exactly the correct way to do it 👍 Bravo👏👏☮️✊️
Thank you my friend 🤝👍
Well,explained and well executed 🧑🏼🔧
Thank you so much 👍
I like to show these videos to my construction students on how to NOT use a table saw. Never ever stand in line with the blade and always push the wood between the blade and the fence. It is what push sticks are for. This guy will someday suffer a bad kickback accident one day. Don’t use a table saw like this kids.
OK thanks
Точність та якість в роботі, без інструментів складно! 🤘😎
Дякую, без інструменту звичайно))
Молодец! Топово! Интересно! И разнообразно! ЖИРНЫЙ ЛАЙК! С Новым Годом!😊
С новым годом дружище 🎄⛄❄🎅 Благодарю, буду стараться в новом году! Шеф🤝😎
Love the dowl maker, very nice. Thanks for sharing this.
Hello, thank you bro 👍
I agree with the last comment about unsafe practices. Using a sander without dust collection and on MDF is just madness. To those who wished this guy good health, he is going to have to be very lucky. It won't be long before he loses a few fingers, and he is certainly going to have lung problems.
Thank you for your predictions, I hope they don't come true
Cutting long boards using the fence is a big no no. Doing it with your hands is just wishing the board will flip and pull your hand across a blade raised much higher than it has to be.
I watched about 20 seconds into this video and stopped it, due to super unsafe practices on the table saw.
And you did the right thing, all my actions are like this! So be careful ⚠
@@MA-SH However, your ideas are great, and the products that you create are nothing short of GREAT!
@@SteeleMagnolia But thanks for that! Perhaps you think my work is dangerous because of the increase in video speed x5 times
@@MA-SH The speed of the video doesn't change my perception of the danger, as I've been the victim of my own creative mishaps, lol. The table saw almost claimed the fingers on one of my hands, with one cut completely off, to the first joint on my index finger. It was a daring attempt, and proved by the consequences.
I would hate for you to get your hand caught between that fence and the blade, so PLEASE do yourself and your viewers a service by using a push stick. My own advancement and knowledge of woodworking has given me a great appreciation of the art and craft, of which I enjoy immensely.
I'm an EMT also, so I'm fully prepared to suffer the consequences of shortcuts and irrational thinking. I've taught my own three US Marine sons the art of woodworking.
estou encantada com seus projetos, especialmente o jig para fazer pé palito. Vi vários tutoriais e esse é de fato o mais eficiente deles, simples e de fácil execução. Sou grata por compartilhar suas ideias. :)
Hello, thank you very much! 🤝😊
ALL EXCELLENT TOOLS HAND MADE BY YOU BRAVO MASTER SH
Thank you my friend 🤝
Саша приветствую! Хорошие инструменты, лайк!
Здравствуйте Денис 👋Благодарю, с новым годом 🎄 🤝
Que facilidad para para trabajar con la madera👏👏!! Muy buenos los tres videos!! Te deseo a vos y a tu familia un exelente año!!
Buenas noches amigo! ¡Muchas gracias! Le deseo a usted y a sus seres queridos una buena salud de todos los beneficios en el nuevo año 2024! 🤝
Hola, 🦾 todos estan regios para el taller. Saludos cordiales desde Santiago de Chile 🇨🇱.
😎
Pembuatan projeck kayu yang sangat menarik, alangkah baiknya bila disertakan dimensi pada setiap projecknya. Salam dari penghoby kayu indonesia👍🤝
Hello 👋 Thank you bro 🤝
Все работает,все интересно,молодец.Жирный лайк.Больше. подписчиков и удачи В Новом году ...!!!!.
Здравствуйте Анатолий! Огромное спасибо 🤝🎅❄⛄🎄
Аккуратная работа и креативные идеи! Правда смотрел и думал - имея такие инструменты, можно было и станки токарные и шлифовальные недостающие купить 😂 но как пример когда нужно срочно какую-то приблуду - отлично.
Здравствуйте, подобное есть на канале) но всегда нужно что-то новое придумывать 🤔 Спасибо 👍
Awesome ideas, Thhanks for coming up with them.
Hi friend 👋Thank you so much 👍
Some great ideas. Thanks for sharing
Hi 👋 Thank you so much 👍
Parabéns, você é genial e muito criativo!!!👏🤝🙌
Obrigado amigo 👍
Very high quality jigs right there. Thanks for sharing! Liked and Subbed.
Hello 👋 Thank you my friend 🤝👍✊
Muy buenas ideas Master Sh ..... Felicitaciones..!
🤝😁
Nice! Well done and clever. Tnx
Thank you bro
Que interesantes herramientas.
Gracias por compartir
😎👋🤝
Excelentes ferramentas 👏👍
Thank you bro 👍
Muy bueno. En especial el ""
dowel maker""
Gracias
Hola, muchas gracias 👍
Very good. Congratulations.
Thank you my friend 🤝
Excellent - Congratulations
Thank you bro 👍
Great job🙂
Thank you bro 👍
Hello how u
Thanks, man, all right.@@joshlayonworks
7.36, Have the holes all line up with one edge of the top piece of wood, Then you only adjust the other side to select a hole. And only 1 screw is needed to hold the moving piece.
Ok, thanks 👍
I love your ideas. I don’t love your safety protocols.
Thank you, friend, all the best to you 🤝
Amazed you still have fingers.
😊
С наступающим тебя дружище праздником и Новым годом.здоровья и удачи во всём.Новых идей в новом году.
Здравствуйте Николай! Огромное спасибо! Вам и вашим близким мирного неба над головой здоровья и просто хорошего настроения весь год 🎄 ⛄🎅❄🤝
Very interesting jigs, but this woodworker is way too comfortable doing dangerous things with his tools.
Thank you 👍
Happy New Year Alexander from Bonny Scotland, cheers mate, good health to you and your family.
Hello, thank you very much! I wish you and your loved ones a happy new year! With love from Siberia!
Genius. Thankyou. Im on it 💪🏼
Thank you bro 👍
Hi Master, your creations are always interesting....is it already 2024 in Siberia?....Best wishes from Italy..... 😉
Ciao, tra due ore avremo il 2024! Tutto il meglio per te e per i tuoi cari! 🎄⛄🎅❄🤝
❤non so chie tiringrazio lostsso auguri@@MA-SH
Здравствуйте!🤝с наступаюшим новым годом вас!здоровья,радости,успеха!море позитива,развития каналу,много подписчиков!и конечно новогодний,жирный лайк 👍!🎉🎉🎉
Здравствуйте 👋Огромное спасибо, всех благ и счастливого нового года 🤝🎄⛄🎅❄
@@MA-SH спасибо!в новый год с новыми идеями!🛠️
@vladim473 😁👍
Thank you Sir.🎉
😊🤝
Amazing job
Thank you bro 🤝
Master Sh, what kind of stapler is that you are using?
Hello, pneumatic matrix
1. the tapered leg jig is ok, but straight dowel jigs are inexpensive and work well, i dont see the need to fabricate a big clumsy jig for it
2. no one needs a drum sander without dust collection
3. i realize MDF is popular because of a couple favorable qualities, but on balance it sucks:
(a) it puts toxic formaldehyde into your indoor air just sitting there
(b) it puts very fine toxic dust into your air when you machine it, and
(c) it wrecks every cutting edge that touches it
especially painful to see a router taken to it
use high quality plywood or solid wood and make better stuff
Okay, I'll take your advice into account! Happy New Year 🎅
Great work .. just video need to speed up a little more bit .. 👋
Ok thanks 😊
Респект и уважуха за приспособы, летом попробую повторить
Здравствуйте, благодарю 🤝
Что, вот также с помощью набора профессиональных инструментов слепишь деревянные недоинструменты?😅
@@AlexandrPuzakov главное начать
@@AlexandrPuzakov да, попробуй повторить, тебе понравится
Don't let the nay-sayers get you down. You have great problem solving skills and a new subscriber
Thank you, my friend! I will keep trying! 🤝
Wonderful !!
Thank you my friend!
Sehr gut gemacht 🦅
Danke 🫡
Особенно второй просто класс! Не понятно как пилочки вообще касаются дерева, но результат - класс.
Здравствуйте, огромное спасибо 🤝
Доктор Дью одобрит. С помощью профессионального фрезера сделать деревянный шлифофоватофрезер... Тянет на 250 полуляхов из 250-ти 😁
О-о-о-о-о, 250 это много для меня, достаточно и 100😂
Nice video and fantastic problem solving! Woodworking, be it fine instruments or large structures is all about coming up with jigs and tracing shapes! Some more views and you can crowd-fun an actual turning lathe =)
Thank you so much, I hope I can afford it))
Buen vídeo y buen trabajo!! Te felicito amigo 👍
Gracias amigo 🤝
Awesome!!
Thank you bro 👍
Saudações brasileiras para mais um ano criativo, com saúde e paz.
Obrigado amigo, Feliz Ano Novo 💪
MM77 Approved 👍🏼👍🏼
Happy New year, my friend 🤝
Идея рабочая, но вот самый недорогой токарный станок справится с этими задачами намного проще и быстрее
Это да, спасибо 👍
Вижу у вас по направлению больше на дерево перешло. Меня так же. Стоит поработать с деревом. Уже не бросишь 😅
Хочется попробовать всё))
Отличные помощники в работе, спасибо, подскажите изделие #3 из какого материала делалось?
Здравствуйте, благодарю! Из МДФ
Nice job. Now learn to use push shoes so you can keep it up without losing a finger, thumb or worse.
Thank you so much, the next video on Sunday is just about safe sawing! 👋👋
Thank You ...
Hello 👋 Thank you bro
How are we purposed make this without any measurements as a guide hello
Hello, all my videos are improvisations, I don't use drawings.
Спасибо 😃 Молодец 👍🏾
Благодарю вас! С наступающим 🎄
عمل جيد ممتاز. اشكرك
شكرا لك ، صديق ، كل التوفيق لك
das sieht immer so leicht aus passt immer und immer sehr genau nun lieber alexander wünsche ich dir und deiner familie einen guten rutsch , ein gesundes glückliches neues jahr liebe grüße sendet dir waldemar aus deutschland
Guten Abend, Freund! Vielen Dank! Ich wünsche Ihnen und Ihren Lieben eine gute Gesundheit aller guten Dinge im neuen Jahr 2024! 🎄⛄🎅❄
З Прийдешнім Новим роком! 🎄🤘🇺🇦
Взаємно друже 🤝 🎄
Video starts with a sure fire method to cut off fingers quickly. Please do not watch or follow anything in this video. Not everyone who creates these videos actually have any real practical woodworking skills
Of course, you know better, you are an expert, but you did not notice that all the moments in the video are accelerated several times
МАЛАДЭЦ БРАТ !!!
Молодец, но берегите пальцы!
Спасибо 👋
bravo ! ! !
Thank you my friend 👍
Don't practice mistakes, cross cutting on a fence, never!
Thanks
Muito bom.
Thank you bro ✊
excelente
Thank you
perfect
Thank you bro 👍
On item 1, I would not have cut the bearing holes all the way through,
and glue the end boards with the bearing holes facing inword.
Ok thanks 👍
Warning: Nr. 2: 4:51 Min.: niemals so mit der Hand am Kreissägeblatt entlanggehen (sagte der Tischler, der mit 2 Fingern 5 Bier bestellte).
🫶
Alat yang luar biasa
🤝
🙏
amazing ideas
Thank you 🫡
Moin. Ich verstehe nicht, was der Mann da ab 8:35 mit der Oberfräse macht. Ich sehe keinen Anschlag und kann nicht erkennen, was für einen Fräser (Kugellager?) er benutzt.
Könnt ihr helfen?
Hallo, ich kann Ihnen helfen) Dies ist ein gewöhnlicher Fräser ohne Lager, ich mache es ohne Anschlag, indem ich mich auf meine Erfahrung und Vision verlasse 👀
@@MA-SH herzlichen Dank
Best tool he could have is a crown guard on that damned saw.
Thank you bro 👍
sei un GRANDISSIMO !!!!!!!
😊🤝
boa tarde amigo teria as medidas desses projetos seus por favor, obrigado
Olá, desculpe, mas eu não escrevo as dimensões. eu improviso nos meus projetos.
لايك ذهبي 👍
شكرا لك صديق 🤝
❤❤❤❤❤
😊
12:01
Good ideas but poorly executed with unsafe practices. Follow this guy with the expectation of serious injury.
All right, friend, we'll take your advice. 💪
If you see something unsafe, you should use this as an educational opportunity to protect the maker and viewers instead of just making vague accusations.
In general it was well thought out and safe. Two points though: you didn't use a push stick on that narrow cut at 0:33 seconds. You created a missile just waiting to kickback. Also no emergency shut off on the drill/drum sander can be dangerous if some hair or clothing got caught up in it. Just some food for thought!
Too many Karens on UA-cam. Excellent ideas, excellent & safe execution. Master craftsman, thank you @MA-SH.
@@ianshand6094 Hello 👋 Thank you bro 👍
He didn't die.
Без чертежей или хотя бы размеров довольно бесполезный ресурс. Я предпочитаю подписываться и ставить лайки на каналы, которые предлагают больше подробностей для изготовления таких приспособлений. Причем таких каналов довольно много. Вот за ними и стоит следовать.
Я на 100% уверен что вы не чего делать не будете хоть с чертежами хоть без них! Так как я импровизирую , чертежи не использую так как нет у меня их))!
Также как вы где увидел и на свой лад смастерил, и не думал о чертежах)
@@MA-SH Делаю и с чертежами, и без для своей столярной мастерской, но зачем изобретать велосипед, если некоторые сайты предоставляют чертежи. Сложные инструменты покупаю на АлиЭкспресс, но стараюсь сделать некоторые инструменты своими руками - процесс изготовления и результат приятнее. У меня частный дом с хорошо оборудованной мастерской и доступными материалами - вишня, грецкий орех, абрикос, шелковица... Есть дубовые и сосновые пиломатериалы. Так что о 100% не нужно свистеть. 100%-я уверенность - это отнюдь не положительное качество, а признак ограниченного человека.
I see you have all your 10 fingers.
Thank you 👋👋
Neat ideas, but surprised you have all 10 fingers left. That table saw is going to get you eventually if you keep running your hands so close to the blade. And kickback is a bitch.
Thanks, I'll be careful.
Dude... your fingers. Geez.
4:53
It seems so because of the fast playback speed 👋👋
Eso de hacer tubos de madera , si ya los venden hechos , se pierde mas el tiempo haciendo su taaaaan ingenioso mecanismo , que en ir a comprarlos a home depot 😂😂😂😂😂😂
Buddy, you probably made a mistake, this is not an online store, but a channel about homemade crafts with your own hands 😅
👍👍👍
Спасибо Сергей 🤝 С новым годом 🎄
👌
👍
❤
Nice woodworks, but only --all that unsafety at work indeed NOT adviceable. Just do it at your own expense if you may, but please do not teach (or learn!) unsafety.
Hello 👋 Thank you bro 👍
номер 2 ваще полная чушь! наХрена столько заморочек если всё делается обычными плашками
⛄
Сначала надо показывать готовое изделие, и для чего оно, и только потом медленно и долго процесс изготовления. А то приходится смотреть на двойной скорости.
В начале показано, вы куда смотрели 😂
Just watched to see how long it would take before he lost part of a finger. WOW Clever ideas. No clue as to shop safety. NONE at all.
Thank you 👍
And thank you for the polite response. I DO enjoy your innovative tooling.
Why? Dowells are cheap and fun to buy...your time is worth more...no? So clever, buy why?
🤔