Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.
I think I have watched every single roller shade pairing video on the internet and I still can't pair my motor, these chinese products are total pieces of crap.
I have 3 blinds did a factory reset on all 3, put them on individual channels but 2 of them still are moving when 1 channel is selected!
Aynı kanala 2 perde tanıtmışsın 1 tanesini reset yapıp tekrar tanıtacaksın
Did you ever figure out how to put it on a single channel ?
@@alanvalles9107 nope, I just use them on individual channels
@@alanvalles9107 I have just set these up yesterday and come across the same problem
This didn't work. Neither did the instructions that came with the blinds. Very frustrating.
Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip
1. Go to a blind you want to program and select the desired channel on your remote
2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades.
3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test.
I didn’t try how to favorite a position but so far I have the desired settings.
great help for me
I think I have watched every single roller shade pairing video on the internet and I still can't pair my motor, these chinese products are total pieces of crap.
Eşletirme motora bas tık tık ses gelecek kumandadan kanal seç yukarı yön tuşuna basılı bekle motor tık tık yapacak eşleştirme tamam
Actually very simple
All the negative comments made me think ….psh I can fix my blinds.
Done in under a minute
Will never use select blinds motorized shades again. Terrible.
Wow thank you!
I really hate how complicated you guy make it!!! This is terrible
Select blinds system is too complicated and the motor is too loud when going up or down! Not mentioning that pairing with Alexa is still not working.
Hi there, please reach out to our customer service team at customercare@selectblinds.com so we can help you figure this out asap. 😊
This is bullshit …I hate how complicated you guys make this!!!!!
Exactly this is bull shit 😡😡😡
Too Complicated
SOMFY