Hi Ivo, two things I saw also -- not just to recycle, but to extract from a higher dimension (allegedly) - 1) Capture of the Heaviside flow, by making the end of the inductor wire pass through a hole in a capacitor; 2) Create some sort of singularity by pulsing two coils sharing a common core in opposite direction, so the fluxes 'slam' into each other inside the core. I will run my own experiments with a different shape of the coil - cylindrical coil but with a toroidal core with 4 arms closing in around it. On each arm, having a secondary coil to do what I said above / I will have to enrich each secondary with a capacitor piercing through the wires. Can't wait :). Thank you for the inspiration :)
The fact that you have open sourced this information is inspirational, honorable, and very cool, Thank You Master Ivo! You are a great teacher. I'm using your videos to learn and experiment in my journey to understanding more about inductance, resonance, dielectric fields and harvesting Back EMF (recycled energy) to amplify resonant energy. My goal is to make a more efficient alternator, and learn a lot in the process. Thanks again!
suuper! really interesting! at this time when there are so many empty speeches, your experiments are inspiring. no extra words. your actions resonate. you encouraged my soul, too. started to roll up pancake coils!! thank you!
did you try to send back-emf spike directly into a separate coil that is made to ring at an inverse integer multiple of wavelength of main coil? maybe you can setup some kind of positive feedback like in a tesla coil, and not need a separate clock/fet circuit for it. My scope is not fast enough for the signals to be able to tune well those conveniently sized coils; i wish i had a 30MHz scope, mine is only 2MHz.
Easy Test: Tesla Bifilar Coil on a Toroid (R: 4 Ohm ; L = 300uH) Connect it directly to a Signal Generator with a Oscilloscope in Parallel. Use a Square Wave (1 khz, not relevant). Then increase the Amplitude of the Signal generator slowly. You can see that the Amplitude JUMPS although the Amplitude is increasing linear. As if there are separate Energylevels. (Example : Ouput Signal generator : 1.99V peak to Peak - Measured Peak to Peak Voltage over the Tesla Bifilar Coil : 6.64V (!) ... then : Output signal generator : 2V Peak to Peak - Measured Peak to Peak Voltage over the Tesla Bifilar Coil : 13.8V (!)) You have to see it. This is an easy experiment. BTW: I can see no Resonance for this Coil if i scan it from 1 kHz to 10 Mhz. Another find: If i catch the Voltage point at that the Amplitude JUMPS, then the Coil oscillates for itself with a Frequency of 272 khz and a Amplitude of 200V peak to peak. Explanation : I switch the Amplitude of the Signal Generator from 2V pp to 1 V pp and this generate a Self-Oscillation of the Bifilar Coil with the mentioned Voltage (!).
have you tried the same setup but instead discharge the back emf capacitor at the maximum low of the signal? so that it instead resonates with the magnetic field (I know this is counterintuitive but just curious of the result, I believe it would provide an increased current but perhaps I'm wrong)
CPS made it clear in his books that he was working for "the man" who had an agenda that was contrary to education. His explanations were designed around keeping the systems running to licensed and patented designs, innovation was not to be supported. So you have to rethink your model of electricity before redesigning circuits. To define electrical power as charge (voltage differentials) and magnetism (current) in two magical fields does a great job of keeping the existing designs up and running without giving away a model that can be exploited to design improved equipment. Plainly what it prevents is thinking of electricity as two components that can be assembled or transformed from each other directly (one is magically maximized when the other is minimized) Yet Magnetic lines of force do not exist (there is no force along such lines and there are no knives or scissors in dielectricity that can cut them to generate electricity. Also, the materials and constructions control the phase of one to the other, so not making this clear locks you into Lenz's Law when its just an effect of bad transformer design. (inductors without capacitance) No generator producer needs a self-powered electrical generator to rock the relationship with fuel suppliers or cost-based public monopolies and all the raw materials generating profits for centralized distribution grids. Licensed monopolies will always squash innovation to protect their Profitability. The electrical generation without consumption of resources was clearly put into production with the installation of the Transatlantic Cable; it will never be implemented in the power grid.
@Michael Schulz ... Can you share schematics ( or ready made amplifier ) for signal generator ?. Am using older gwinstek 4MHZ function generator... Regards !
Which inductance is used in formula - the whole transformer 12v wind or 1/2 of 12v wind, where capacitor is.?? The L is used with 940uf C, for resonance at 60 cycles. I plan on attempting current increase of Briggs alternator ring on lawnmower using bifilar rewind + capacitor
Hey Ivo! im reviewing some concepts with the DC impulses and LC circuits; are you getting any LC resonance at the output coil? I ask since you are using a capacitor to store the Back EMF. I assume that the capacitor only receives the back EMF correct?
that's an old video. I now use the back emf, as an impulse, to induce displacement currents, so I don't store them in a cap. the displacement current is captured by the grounded secondary. it seems to do something with the earth. as I am seeing ground currents
@@MasterIvo ahh I see 🤔rectifying it the output, hmm is there very little loss with this rectification? I figured that I could use oil to prevent arcing at the contacts of my interrupter, but the interrupter itself has a way to go in terms of improvement still anyway.
Master Ivo, you made a really good wotk and I would know more on this subject! Is there a way to come privately in contact with you? Thanks in advance.
Im really curious to know how you been able to build a pulse capacitor discharger that is able to adjust the phase on it. Also, how do you discharge your capacitor I to the coil shown on the oscilloscope? Do you do it via induction or directly physically connected to the coil? Anyway really good work! ----------------------------------------- Some believe that is the "trick" behind Kapanadze device. 2 circuits: one mostly magnetic and one mostly dielectric. So Sparking a high dielectric into an oscillating magnetic circuit in phase and on the peak of the voltage rise. These two circuits are capacitively coupled via a earth ground. Anyway, I'll like to discuss this with you a bit more if you have spare time. Thx again for your good work!
There is a lot to it. I still don't understand all. What I do understand is, that a unipolar disruptive capacitor discharge can induce radiant electricity effects, this Radiant energy is key to the device. So the key is to charge a capacitor (in my opinion it should me negative voltage) and discharge this capacitor very fast and abrupt into a (bifilar) coil. this sudden change in voltage greates a longitudinal radiant electricity pressure wave. this nano second discharge is not allowed to change polarity. the coil should not oscillate. telsa called it a damped wave. but it looks more like a spike. this radiant energy is the collected by a second coil. this coil is tuned to the right frequency, and does oscillate (undamped waves) I will be experimenting with these concepts soon, in combination with bifilar coils. the results will be shared on my channel for all to learn from.
I am ok with the fact you still need to learn about it. But it eliminates the learning curve for the rest of us. The more we share with each-other, the faster we get there. We all look for the way to be free from " public utility companies" And yes, i realize some of us don't share at all. Even me, I only have some ideas, but then again, I'm not actively researching. Anyway, Thanks for the reply.
Have you experimented with toroidal fields using coils? Just got through a bunch of suppressed tech videos and curious if you had tried any field theory?
Yes I work with field theory, and I'm in the middle of creating a ring torroid field. Look at my Steinmetz video's these are also based on field theory: ua-cam.com/video/NSKKbEo6fzI/v-deo.html
I understood you created a vice-circule, but unfortunately I don't understand much of electronics and even so I got to understand your explaining. I'd like to know how many volts one may obtain by using this aparatus, if it's possible you answer me.
You got your terms a little mixed up ( maybe just language barrier). You use 'energy' when i believe you mean 'power'. I know it may sound like im being picky but there is a difference. Energy (joules) is the 'work' performed, where power (watts) is the rate at which energy is being consumed or, more accurately, transfered. However, regardless of terms, Energy can not be amplified, and the power out can never be greater than the power in. Also, (again im being picky of terms here) 'voltage' (volts) can not be stored in a capacitor, a capacitor stores 'energy'. Voltage is the electromotive force or the difference in electric potential that cause charges to move thru a conductor. It may seem trivial but its important to understand the difference between these terms as they have different units of measurement.
well, energy is only conserved in a closed system. In a open system it is not. Aether is every where and brings balance to the force. Totally agree, on energy vs power.
Hi Ivo, like the way you hold me captive from video to video and build the story. Did you mean to say, when discussing back emf, that voltage tends toward infinity? Nice job with the scope work...
yes, Steinmetz wrote of you present a magnetic (high current) circuit with a infinite large resistance (a perfect fast switch that opens) it produces a infinite voltage, this is what we now know as inductive kickback, or as i like to call it, back emf
Ok, I see, helped seeing his quote. Of course an infinitely large resistance is not possible, but I get the idea. The way I think of this is that the magnetic field that is created in a coil contains a measurable amount of joules of energy. This is the energy you have to work with regardless of the magnitude of voltage. You have a choice of expressing this energy in volt*amps (i.e., High volts low amps or whatever) by the circuit you create. Now, if you incorporate J. Newman into the mix and change up your backemf coil then it is possible to improve this relationship.
there is also the time factor. The smaller the time, the larger the voltage. It is the same joules of energy. but the trick might be in presenting this voltage to the resonant coil. the instant high voltage, gives a punch to the ether. Like a longitudinal pressure front (field) al over the pancake coil.
The instant high voltage would give a "punch" to the ether but the vibration takes the easiest path into your collection capacitor. It looks as if you are "presenting" the energy of this "punch" in a calculated way and applying as positive feedback to the resonant coil in the greatest constructive manner in your video. Looking forward into seeing your strategy in subsequent videos on the eventual energy extraction pump. Good stuff...
when the back emf charged capacitor is presented (connected) to the coil (which has an equal size capacitor parallel to it) the coils inductance would be a high resistance path. So the energy would flow to the parallel capacitor. this capacitor is at maximum voltage (of the resonant cycle). at the same time we have a dielectric field inside the coil, this also gets to see the extra energy of the added series capacitor. I still dont fully understand what more is happening. but I keep thinking the added series capacitor gives a punch to the dielectric field of the coil. this seems to be the key.
Well at some point it would be great to see energy Watts in versus energy watts out. I do wonder if it can perform this work function as I always have believed it possible even with mechanical systems but more so without the inherent losses of mechanical systems. when you add natural phenomenon together in a system that has low or little mass you are starting from a greater bias.
@electron protron Neutron The unit of measurement for energy is joules, not watts. Watts is the unit for power, which is a measurement of the rate at which energy is transfered.
there is energy losses in electrical circuits, same as with mechanical systems. No matter what form energy may take, there will always be losses when it is transfered from its source to the load. Losses can be minimalized, never eliminated. 100% Efficiency is not possible in any system.
Sure in a closed system that's not utilising the normally lost energy like this back emf but on top of that you can also allow the flow of energy in the either to be moved into the circuit if it's pumped from a dialectric . Its just about creating the initial pulse and then what you do with what it creates! Its there I know it in my being . Every time someone breathes in they inturn breathe out . Put that air into a black plastic bag and now you have buoyancy that can float a huge amount of weight compared with the energy it took to exhale. Now put that bag in a glass room in the direct sunlight and watch it absorbe the energy and expand . That's adding energy from a natural phenomenon to the system just like tapping the either. You got to charge the system and then know how to extract more energy from the natural environmental energies that exist. Notice how the more air thats in the bag allows more energy from the sun to expand the bag . So more volume increases the amount that can be received . Its the same same . Energy pumping ! Just got to work out how to ripple that space time !
@@ozymandiasking173 Sure in a closed system that's not utilising the normally lost energy like this back emf but on top of that you can also allow the flow of energy in the either to be moved into the circuit if it's pumped from a dialectric . Its just about creating the initial pulse and then what you do with what it creates! Its there I know it in my being . Every time someone breathes in they inturn breathe out . Put that air into a black plastic bag and now you have buoyancy that can float a huge amount of weight compared with the energy it took to exhale. Now put that bag in a glass room in the direct sunlight and watch it absorbe the energy and expand . That's adding energy from a natural phenomenon to the system just like tapping the either. You got to charge the system and then know how to extract more energy from the natural environmental energies that exist. Notice how the more air thats in the bag allows more energy from the sun to expand the bag . So more volume increases the amount that can be received . Its the same same . Energy pumping ! Just got to work out how to ripple that space time !
no spark gaps. use mosfet switch instead. and instead of capacitor discharge through sparkgap, use a coil discharge (inductive spike) by opening the mosfet switch really fast (impulse generation)
@@MasterIvoOmgg you replied😁 Honoured to be speaking with you Sir🙏 Yess I agree with you:) Although I have one enquiry to make I managed to get High voltage (around 3k to 6k) using 150mm toroidal core and a coil and 2 n42 grade magnets (spun with a high kv drone motor) My questions is this 1. My frequency was a few thousand hertz ) and on load there was a draw on the system like resistance Then I introduced a spark gap and upon adjusting the spark length a could adjust the frequency from a few kiloherts to megahertz (I actually could not measure) !! And surprisingly the load on my little spinning magnets was nullified! And I got way more watts out of it! I actually ran out of load to test it on! So what is this spark gap phenomenon? 2. Is this standing wave and resonance you create between the two bifilar coils.. (inductive spike) In some way acting just like the spark gap by relieving the resistance by sending back energy into the sea of energy? 3. Mosfets are exactly the way to go! Although they get hot! And can't be run 24.7 And circuits have a much higher chance of getting fried! So basically Is it better to create high voltage and high frequency in a coil - (impulse generation) ( and then subsequently use another coil to resonate and provide current to the load), using transistors and igbt circuit? Or is it better to create high voltage and high frequency using mechanical means and spark gaps (which can be run longer) 4.the induction amplification process using standing wave created by the bifilar coil.. Does it in any way act similar to a spark gap to relieve resistance by resonance Can they be used in conjunction with each other? If you're still reading this! Thanks broo (I'm an ametuer! Just wanna see the people of this world benefit from be technology! And i love Nikola Tesla! PS. I'm from India! Loving the hair bro! I too have long hair;) Shall update you on my progress using mechanical means! Cheers yo😁🔥
thanks :) many questions! I'll subscribe to your channel to see your progress. My mosfets stay cool and can run 24-7 no problem. sparkgap is best for capacitor discharge, but it wears out relatively quick. Instead I discharge a coil with mosfet switch. It seems the quick discharge of a dc field (dielectric field) creates a Void that is filled by the ambient aether. Bless you my long haired friend
@@MasterIvo okay I'll try mosfets, I just had that glitch in my mind that they fry fast, so thanks for that :) Hahaha that's cool honestly the videos i take i haven't uploaded! But i promise you I will upload all my videos :) Okay soo Quick discharge.. Creates a void! You're right! The pancake coil creates a dielectric field in a circular plane which shoots out in all direction! And a magnetic field always switching polarity (depends on frequency), this creates a counter spacial bubble of switching magnetic field and collapsing and expanding dielectric!⚡ This 'void' draws in ether or energy! Wowwww that's really cool! And you said it so easily!!! :D Coool I can't wait to try! Thank you MasterIvo:) I shall have my videos up soon and send you links :) Cheers yo😁🔥
sparkgaps don't work well on these high frequencies. there are much harder to control and have much wear and tear. A mosfet performs much more stable, is precice and does not break nearly as fast as a sparkgap. they are silent don't emit RF, are small... low power consumption. and very fast. sparkgaps can be fun but are not for me. it's 2018 not 1895. use the best tech available.
A Mosfet has an internal Diode, this prevents the Selfoscillation of the Tesla Bifilar Coil. So there are disadvantages to use new Tech. (But i also want to prevent to use a Spark-Gap if it is possible)
brake vs break ? like slowing it down? a mosfet does break, the resistance goes very high, just like the air represents a very high resistance. and a mosfet can break much faster than a sparkgap can. a sparkgap needs a magnetic field to stop it from conducting, thats why they dont work at high frequencies.
Hello, I find it interesting you are looking at the accelinstruments(dot)com information and concluding that the purpose of the series capacitor is to capture the coil spike. In that circuit there is no sharp switching to create the coil spike, but instead its operation seems to depend on some kind of series--parallel resonance. I would like to find a replication of this circuit - do you know of any? Respect for sharing your work.
thanks, my work is inspired by it, its not a direct replication. the information states the series parallel capacitors have to be in phase. the energy adds up and is amplifing the voltage, and it works. I dont know how they do it in real life. I guess there is more to it than the article states.
Yes - I like this technique to re-use the spike by pushing it back into the coil as you do. Commonly a second battery is charged from this spike, but then you have losses of charging a battery, as well as the inconvenience of... another battery. Good work :)
Regarding the negative spike... it is said that, if the resonance can be matched with the impedance of a load (or resonant circuit) on the negative side - you will have what you want. So, instead of sending the negative spike back into the coil, direct it out on one-wire and create a matched impedance load along this "negative" path. (You can terminate the wire on the positive of a battery or cap that is in series with your power source... or perhaps isolated metal plate which I have not tried.) I am studying this myself. Rick Friedrich - who has a channel on here on YT - has shared a lot about this. You can read his non-technical introduction to resonance here rpmgt(dot)org/ResonantSymphony(dot)pdf.
Master Ivo, are you familiar with Gerard Morin? I've posted your name to him and I will now give you his link. I think you two are on the same page. Here's a link to his latest video : ua-cam.com/video/y4Uzx5qZbOg/v-deo.html
Hi Ivo, two things I saw also -- not just to recycle, but to extract from a higher dimension (allegedly) - 1) Capture of the Heaviside flow, by making the end of the inductor wire pass through a hole in a capacitor; 2) Create some sort of singularity by pulsing two coils sharing a common core in opposite direction, so the fluxes 'slam' into each other inside the core. I will run my own experiments with a different shape of the coil - cylindrical coil but with a toroidal core with 4 arms closing in around it. On each arm, having a secondary coil to do what I said above / I will have to enrich each secondary with a capacitor piercing through the wires. Can't wait :). Thank you for the inspiration :)
The fact that you have open sourced this information is inspirational, honorable, and very cool, Thank You Master Ivo! You are a great teacher.
I'm using your videos to learn and experiment in my journey to understanding more about inductance, resonance, dielectric fields and harvesting Back EMF (recycled energy) to amplify resonant energy. My goal is to make a more efficient alternator, and learn a lot in the process. Thanks again!
Thanks for the video. Your topology is a novel way to churn the ethers and proof of concept.
What a concept! Just found your channel. Thanks for publishing your work.
thanks, great tjat you found it. Please share it as youtube doesn't.
What a great finding !
Thanks for sharing Mann !
suuper! really interesting! at this time when there are so many empty speeches, your experiments are inspiring. no extra words. your actions resonate. you encouraged my soul, too. started to roll up pancake coils!! thank you!
the truth will set us free
did you try to send back-emf spike directly into a separate coil that is made to ring at an inverse integer multiple of wavelength of main coil? maybe you can setup some kind of positive feedback like in a tesla coil, and not need a separate clock/fet circuit for it. My scope is not fast enough for the signals to be able to tune well those conveniently sized coils; i wish i had a 30MHz scope, mine is only 2MHz.
ai 2 MHz that isn't much.
I am going to work high voltage.
using the impulses to discharge it.
Good stuff Work Master Ivo! Keep up the great work!
Easy Test: Tesla Bifilar Coil on a Toroid (R: 4 Ohm ; L = 300uH) Connect it directly to a Signal Generator with a Oscilloscope in Parallel. Use a Square Wave (1 khz, not relevant). Then increase the Amplitude of the Signal generator slowly. You can see that the Amplitude JUMPS although the Amplitude is increasing linear. As if there are separate Energylevels. (Example : Ouput Signal generator : 1.99V peak to Peak - Measured Peak to Peak Voltage over the Tesla Bifilar Coil : 6.64V (!) ... then : Output signal generator : 2V Peak to Peak - Measured Peak to Peak Voltage over the Tesla Bifilar Coil : 13.8V (!)) You have to see it. This is an easy experiment. BTW: I can see no Resonance for this Coil if i scan it from 1 kHz to 10 Mhz. Another find: If i catch the Voltage point at that the Amplitude JUMPS, then the Coil oscillates for itself with a Frequency of 272 khz and a Amplitude of 200V peak to peak. Explanation : I switch the Amplitude of the Signal Generator from 2V pp to 1 V pp and this generate a Self-Oscillation of the Bifilar Coil with the mentioned Voltage (!).
Brilliant! A new subscriber and a thankful fellow science lover.
have you tried the same setup but instead discharge the back emf capacitor at the maximum low of the signal? so that it instead resonates with the magnetic field (I know this is counterintuitive but just curious of the result, I believe it would provide an increased current but perhaps I'm wrong)
the maximum current in a resonant coil is when the voltage is zero. I've tried it, but it doesn't work. working on a newer improved version of this.
CPS made it clear in his books that he was working for "the man" who had an agenda that was contrary to education. His explanations were designed around keeping the systems running to licensed and patented designs, innovation was not to be supported. So you have to rethink your model of electricity before redesigning circuits. To define electrical power as charge (voltage differentials) and magnetism (current) in two magical fields does a great job of keeping the existing designs up and running without giving away a model that can be exploited to design improved equipment. Plainly what it prevents is thinking of electricity as two components that can be assembled or transformed from each other directly (one is magically maximized when the other is minimized) Yet Magnetic lines of force do not exist (there is no force along such lines and there are no knives or scissors in dielectricity that can cut them to generate electricity. Also, the materials and constructions control the phase of one to the other, so not making this clear locks you into Lenz's Law when its just an effect of bad transformer design. (inductors without capacitance) No generator producer needs a self-powered electrical generator to rock the relationship with fuel suppliers or cost-based public monopolies and all the raw materials generating profits for centralized distribution grids. Licensed monopolies will always squash innovation to protect their Profitability. The electrical generation without consumption of resources was clearly put into production with the installation of the Transatlantic Cable; it will never be implemented in the power grid.
@Michael Schulz ... Can you share schematics ( or ready made amplifier ) for signal generator ?. Am using older gwinstek 4MHZ function generator... Regards !
Great work my freind and keep it up yiu are on the right path.
thanks
Which inductance is used in formula - the whole transformer 12v wind or 1/2 of 12v wind, where capacitor is.?? The L is used with 940uf C, for resonance at 60 cycles. I plan on attempting current increase of Briggs alternator ring on lawnmower using bifilar rewind + capacitor
thanks for sharing Master Ivo
Hey Ivo! im reviewing some concepts with the DC impulses and LC circuits; are you getting any LC resonance at the output coil? I ask since you are using a capacitor to store the Back EMF. I assume that the capacitor only receives the back EMF correct?
that's an old video.
I now use the back emf, as an impulse, to induce displacement currents, so I don't store them in a cap.
the displacement current is captured by the grounded secondary. it seems to do something with the earth. as I am seeing ground currents
@@MasterIvo ahh yes, so then your cap connects to by he ground? Also it all remains Pulsed DC right and not Alternating Current as the output?
@@cosmicyoke every coil is resonant, so only the driver is pulsed DC the rest is AC, which will be rectified to dc for power
@@MasterIvo ahh I see 🤔rectifying it the output, hmm is there very little loss with this rectification? I figured that I could use oil to prevent arcing at the contacts of my interrupter, but the interrupter itself has a way to go in terms of improvement still anyway.
@@cosmicyoke yes rectified using diode is very low in loss
Master Ivo, you made a really good wotk and I would know more on this subject! Is there a way to come privately in contact with you? Thanks in advance.
Thanks. Here ua-cam.com/users/masterivoabout you can find my email (my youtube about page). Use a computer, mobile doesn't show the contact info.
Im really curious to know how you been able to build a pulse capacitor discharger that is able to adjust the phase on it. Also, how do you discharge your capacitor I to the coil shown on the oscilloscope? Do you do it via induction or directly physically connected to the coil? Anyway really good work! ----------------------------------------- Some believe that is the "trick" behind Kapanadze device. 2 circuits: one mostly magnetic and one mostly dielectric. So Sparking a high dielectric into an oscillating magnetic circuit in phase and on the peak of the voltage rise. These two circuits are capacitively coupled via a earth ground. Anyway, I'll like to discuss this with you a bit more if you have spare time. Thx again for your good work!
Look at my about page on my UA-cam channel from a lab/desk top computer, there is my email. If you want to talk more.
Why not explain it here?
at least we all could learn from it
There is a lot to it. I still don't understand all. What I do understand is, that a unipolar disruptive capacitor discharge can induce radiant electricity effects, this Radiant energy is key to the device. So the key is to charge a capacitor (in my opinion it should me negative voltage) and discharge this capacitor very fast and abrupt into a (bifilar) coil. this sudden change in voltage greates a longitudinal radiant electricity pressure wave.
this nano second discharge is not allowed to change polarity.
the coil should not oscillate. telsa called it a damped wave. but it looks more like a spike.
this radiant energy is the collected by a second coil. this coil is tuned to the right frequency, and does oscillate (undamped waves)
I will be experimenting with these concepts soon, in combination with bifilar coils. the results will be shared on my channel for all to learn from.
I am ok with the fact you still need to learn about it.
But it eliminates the learning curve for the rest of us.
The more we share with each-other, the faster we get there.
We all look for the way to be free from " public utility companies"
And yes, i realize some of us don't share at all.
Even me, I only have some ideas, but then again, I'm not actively researching.
Anyway, Thanks for the reply.
thanks danielsThierry. You are right. we all hold some pieces of the puzzle, if everyone shares, we can make the pieces fit easier
nice work sir ♾️🙏🏼
Well done
Have you experimented with toroidal fields using coils? Just got through a bunch of suppressed tech videos and curious if you had tried any field theory?
Yes I work with field theory, and I'm in the middle of creating a ring torroid field. Look at my Steinmetz video's these are also based on field theory:
ua-cam.com/video/NSKKbEo6fzI/v-deo.html
I understood you created a vice-circule, but unfortunately I don't understand much of electronics and even so I got to understand your explaining.
I'd like to know how many volts one may obtain by using this aparatus, if it's possible you answer me.
Many volts, this is an older setup, i moved on(see recent radiant power video) . as this voltage is without current and thus has no power
I am fairly new at building.is it possible you could put together a parts list and a diagram so I could recreate this ?
its possible, and I intend to do that in the future, with an upgraded design. it still needs a few tweaks.
Are you talking g about series srf then Parallel srf, switching between them
?
You got your terms a little mixed up ( maybe just language barrier). You use 'energy' when i believe you mean 'power'. I know it may sound like im being picky but there is a difference. Energy (joules) is the 'work' performed, where power (watts) is the rate at which energy is being consumed or, more accurately, transfered. However, regardless of terms, Energy can not be amplified, and the power out can never be greater than the power in. Also, (again im being picky of terms here) 'voltage' (volts) can not be stored in a capacitor, a capacitor stores 'energy'. Voltage is the electromotive force or the difference in electric potential that cause charges to move thru a conductor. It may seem trivial but its important to understand the difference between these terms as they have different units of measurement.
well, energy is only conserved in a closed system. In a open system it is not. Aether is every where and brings balance to the force.
Totally agree, on energy vs power.
Hi Ivo, like the way you hold me captive from video to video and build the story. Did you mean to say, when discussing back emf, that voltage tends toward infinity? Nice job with the scope work...
yes, Steinmetz wrote of you present a magnetic (high current) circuit with a infinite large resistance (a perfect fast switch that opens) it produces a infinite voltage, this is what we now know as inductive kickback, or as i like to call it, back emf
Ok, I see, helped seeing his quote. Of course an infinitely large resistance is not possible, but I get the idea. The way I think of this is that the magnetic field that is created in a coil contains a measurable amount of joules of energy. This is the energy you have to work with regardless of the magnitude of voltage. You have a choice of expressing this energy in volt*amps (i.e., High volts low amps or whatever) by the circuit you create. Now, if you incorporate J. Newman into the mix and change up your backemf coil then it is possible to improve this relationship.
there is also the time factor. The smaller the time, the larger the voltage. It is the same joules of energy.
but the trick might be in presenting this voltage to the resonant coil.
the instant high voltage, gives a punch to the ether. Like a longitudinal pressure front (field) al over the pancake coil.
The instant high voltage would give a "punch" to the ether but the vibration takes the easiest path into your collection capacitor. It looks as if you are "presenting" the energy of this "punch" in a calculated way and applying as positive feedback to the resonant coil in the greatest constructive manner in your video. Looking forward into seeing your strategy in subsequent videos on the eventual energy extraction pump. Good stuff...
when the back emf charged capacitor is presented (connected) to the coil (which has an equal size capacitor parallel to it) the coils inductance would be a high resistance path. So the energy would flow to the parallel capacitor. this capacitor is at maximum voltage (of the resonant cycle).
at the same time we have a dielectric field inside the coil, this also gets to see the extra energy of the added series capacitor.
I still dont fully understand what more is happening. but I keep thinking the added series capacitor gives a punch to the dielectric field of the coil. this seems to be the key.
isaa there a schematic for your description
Well at some point it would be great to see energy Watts in versus energy watts out. I do wonder if it can perform this work function as I always have believed it possible even with mechanical systems but more so without the inherent losses of mechanical systems. when you add natural phenomenon together in a system that has low or little mass you are starting from a greater bias.
@electron protron Neutron The unit of measurement for energy is joules, not watts. Watts is the unit for power, which is a measurement of the rate at which energy is transfered.
there is energy losses in electrical circuits, same as with mechanical systems. No matter what form energy may take, there will always be losses when it is transfered from its source to the load. Losses can be minimalized, never eliminated. 100% Efficiency is not possible in any system.
Sure in a closed system that's not utilising the normally lost energy like this back emf but on top of that you can also allow the flow of energy in the either to be moved into the circuit if it's pumped from a dialectric . Its just about creating the initial pulse and then what you do with what it creates! Its there I know it in my being . Every time someone breathes in they inturn breathe out . Put that air into a black plastic bag and now you have buoyancy that can float a huge amount of weight compared with the energy it took to exhale. Now put that bag in a glass room in the direct sunlight and watch it absorbe the energy and expand . That's adding energy from a natural phenomenon to the system just like tapping the either. You got to charge the system and then know how to extract more energy from the natural environmental energies that exist. Notice how the more air thats in the bag allows more energy from the sun to expand the bag . So more volume increases the amount that can be received . Its the same same . Energy pumping ! Just got to work out how to ripple that space time !
@@ozymandiasking173 Sure in a closed system that's not utilising the normally lost energy like this back emf but on top of that you can also allow the flow of energy in the either to be moved into the circuit if it's pumped from a dialectric . Its just about creating the initial pulse and then what you do with what it creates! Its there I know it in my being . Every time someone breathes in they inturn breathe out . Put that air into a black plastic bag and now you have buoyancy that can float a huge amount of weight compared with the energy it took to exhale. Now put that bag in a glass room in the direct sunlight and watch it absorbe the energy and expand . That's adding energy from a natural phenomenon to the system just like tapping the either. You got to charge the system and then know how to extract more energy from the natural environmental energies that exist. Notice how the more air thats in the bag allows more energy from the sun to expand the bag . So more volume increases the amount that can be received . Its the same same . Energy pumping ! Just got to work out how to ripple that space time !
Do you maybe have a circuit diagram for this circuit?
sorry no I have not.
Can you use the excess EMF to pulse charge a battery, instead of a capacitor ?
yes you can
Yess Holy fuckkk your right daamnnn that's so cool
Do you think spark gaps might help?
no spark gaps. use mosfet switch instead. and instead of capacitor discharge through sparkgap, use a coil discharge (inductive spike) by opening the mosfet switch really fast (impulse generation)
@@MasterIvoOmgg you replied😁
Honoured to be speaking with you Sir🙏
Yess I agree with you:)
Although I have one enquiry to make
I managed to get High voltage (around 3k to 6k) using 150mm toroidal core and a coil and 2 n42 grade magnets (spun with a high kv drone motor)
My questions is this
1. My frequency was a few thousand hertz ) and on load there was a draw on the system like resistance
Then I introduced a spark gap and upon adjusting the spark length a could adjust the frequency from a few kiloherts to megahertz (I actually could not measure)
!! And surprisingly the load on my little spinning magnets was nullified!
And I got way more watts out of it! I actually ran out of load to test it on!
So what is this spark gap phenomenon?
2. Is this standing wave and resonance you create between the two bifilar coils.. (inductive spike) In some way acting just like the spark gap by relieving the resistance by sending back energy into the sea of energy?
3. Mosfets are exactly the way to go! Although they get hot! And can't be run 24.7
And circuits have a much higher chance of getting fried!
So basically
Is it better to create high voltage and high frequency in a coil - (impulse generation) ( and then subsequently use another coil to resonate and provide current to the load), using transistors and igbt circuit?
Or is it better to create high voltage and high frequency using mechanical means and spark gaps (which can be run longer)
4.the induction amplification process using standing wave created by the bifilar coil.. Does it in any way act similar to a spark gap to relieve resistance by resonance
Can they be used in conjunction with each other?
If you're still reading this! Thanks broo (I'm an ametuer! Just wanna see the people of this world benefit from be technology! And i love Nikola Tesla!
PS. I'm from India! Loving the hair bro! I too have long hair;)
Shall update you on my progress using mechanical means!
Cheers yo😁🔥
thanks :)
many questions!
I'll subscribe to your channel to see your progress.
My mosfets stay cool and can run 24-7 no problem.
sparkgap is best for capacitor discharge, but it wears out relatively quick.
Instead I discharge a coil with mosfet switch.
It seems the quick discharge of a dc field (dielectric field) creates a Void that is filled by the ambient aether.
Bless you my long haired friend
@@MasterIvo okay I'll try mosfets, I just had that glitch in my mind that they fry fast, so thanks for that :)
Hahaha that's cool honestly the videos i take i haven't uploaded! But i promise you I will upload all my videos :)
Okay soo Quick discharge.. Creates a void! You're right!
The pancake coil creates a dielectric field in a circular plane which shoots out in all direction! And a magnetic field always switching polarity (depends on frequency), this creates a counter spacial bubble of switching magnetic field and collapsing and expanding dielectric!⚡
This 'void' draws in ether or energy! Wowwww that's really cool! And you said it so easily!!! :D
Coool I can't wait to try!
Thank you MasterIvo:)
I shall have my videos up soon and send you links :)
Cheers yo😁🔥
why not use a spark gap instead of mosfet
sparkgaps don't work well on these high frequencies. there are much harder to control and have much wear and tear. A mosfet performs much more stable, is precice and does not break nearly as fast as a sparkgap. they are silent don't emit RF, are small... low power consumption. and very fast.
sparkgaps can be fun but are not for me. it's 2018 not 1895. use the best tech available.
i0.kym-cdn.com/entries/icons/original/000/003/617/OkayGuy.jpg
A Mosfet has an internal Diode, this prevents the Selfoscillation of the Tesla Bifilar Coil. So there are disadvantages to use new Tech. (But i also want to prevent to use a Spark-Gap if it is possible)
brake vs break ? like slowing it down? a mosfet does break, the resistance goes very high, just like the air represents a very high resistance. and a mosfet can break much faster than a sparkgap can. a sparkgap needs a magnetic field to stop it from conducting, thats why they dont work at high frequencies.
@@anserinaeI don't understand your question
Hello, I find it interesting you are looking at the accelinstruments(dot)com information and concluding that the purpose of the series capacitor is to capture the coil spike. In that circuit there is no sharp switching to create the coil spike, but instead its operation seems to depend on some kind of series--parallel resonance. I would like to find a replication of this circuit - do you know of any? Respect for sharing your work.
thanks, my work is inspired by it, its not a direct replication. the information states the series parallel capacitors have to be in phase. the energy adds up and is amplifing the voltage, and it works. I dont know how they do it in real life. I guess there is more to it than the article states.
Yes - I like this technique to re-use the spike by pushing it back into the coil as you do. Commonly a second battery is charged from this spike, but then you have losses of charging a battery, as well as the inconvenience of... another battery. Good work :)
I'm now working on producing a negative voltage inductive spike. This seems to have some benefits, with the interactions between the 3 bifilar coils.
Regarding the negative spike... it is said that, if the resonance can be matched with the impedance of a load (or resonant circuit) on the negative side - you will have what you want. So, instead of sending the negative spike back into the coil, direct it out on one-wire and create a matched impedance load along this "negative" path. (You can terminate the wire on the positive of a battery or cap that is in series with your power source... or perhaps isolated metal plate which I have not tried.) I am studying this myself. Rick Friedrich - who has a channel on here on YT - has shared a lot about this. You can read his non-technical introduction to resonance here rpmgt(dot)org/ResonantSymphony(dot)pdf.
Awesome video and analysis. I have a job for you doing a feasibility study on a Resonating circuit product. If you'd be interested?
Master Ivo, are you familiar with Gerard Morin? I've posted your name to him and I will now give you his link. I think you two are on the same page. Here's a link to his latest video : ua-cam.com/video/y4Uzx5qZbOg/v-deo.html
Phite Onn, yes i know him and his vids
No, electron particles does not exist
Referring to the feed suggestions
indeed all is vibrating energy
reverse the polarity of the electron flow :)
Allen Hudson haha again? yes I know. You are absolutely right. Still building... just finished the pulse transformer
lol my friend keep up the good work, watching intensively.
Uncultured American here...but how do you pronounce your name?
In english just like "Evo" (Devo-D)
paralel LC ResonanceItsWhatWeNeed.ItAmplifiesTheCurrent.L BeingATransformer.ButItsALittleTricky,ToGetTheOverunityOutput.
current impulse to get it going