AnyCubic Photon Mono M7 Pro First Look and Assembly
Вставка
- Опубліковано 1 сер 2024
- Get ready to revolutionize your 3D printing experience with the AnyCubic Photon Mono M7 Pro! We're thrilled to give you an preview at this cutting-edge printer before its official release. Our priority is getting this information to you fast, ensuring you're up to date with the latest in 3D printing technology. Tune in for a detailed showcase of its features and capabilities that set new standards in the industry. Don't forget to like, subscribe, and hit the bell for more updates as they come!
Check out 123-3D: bit.ly/3JWl4E4
Contact us: bit.ly/3wtS5nR
Join our 3D printing community Facebook group: / 1233dprintinguk
Have you heard of 123-3D.co.uk?
We offer a huge range of affordable 3D printing supplies to the UK consumer at the best possible prices. If you have any questions about 3D printing or a product that we sell do not hesitate to contact our customer service team - www.123-3d.co.uk/page/help.html
Did you also know that we have European partners.
UK: www.123-3d.co.uk
Netherlands: www.123-3d.nl
Sweden: www.123-3d.se
Republic of Ireland: www.123-3d.ie
00:00 - Intro
00:32 - Unpacking
02:22 - Assembly and setup
06:32 - First print
09:23 - Build quality and new features
10:52 - Closing thoughts - Наука та технологія
Nice! When do you plan the in depth review?
Can u do a video on the auto feed system? Im doing my 1st test print now. Filled the vat and also out the autofeed on but the autofeed never lowered so i dont know if i should have done something. I guess time will tell but there isnt any videos on it.
Why did they supply a sheet of 'Leveling Paper'?
Did you use it?
Is the machine self levelling?
Do you have footage of the unit while it was printing?
Was clean-up easy or messy?
Not much of a review.
Have you tried changing resins in the vat? the cleanup looks a bit daunting if changing different types of resins with different settings. I just want to make sure I can get all of the old resin out 😅
exactly what Im looking for as well. I wish anycubic would've give us more information..
Great overview! So do you feel like the vat heater is gimmicky, or makes a difference? I can't tell; is it pulling the resin in through the heater, or is it 'just' circulating air through the vat border? Is the heater removable from the vat (in case you want to swap vats for example)?
I can say the vat heater works very well, it circulates the resin through the heater ensuring it's well mixed. So its no gimmic, but you can't remove the unit from the vat.
If I was to swap from grey resin to clear resin would the heater contaminate the clear with grey still left inside the heater?
i bet it will, but there shouldn't remain much grey resin in the heater, when changing to translucent @wrexhamkovu
@@vanilleshake3841 How does the heater part work? Is there a way to clean it?
@@Zimpo79 I don't know for sure, I'm also still learning and just pre-ordered the m7pro
can you tell us how loud the printer is while heating the vat? the m5s from anycubic was very loud.. I hope this time its quieter
This machine is not at all loud when heating
@@123-3D-UK thank you! much appreciated 👏
Maybe I didnt get it, but: Does this machine comes with an ACF Sheet or with a more cloudy FEP Sheet? Im curious if that decreases the quality of the prints (sure its for printing faster, but with the downside of print quality loss)..
Its an ACF film, and with my experience with ACF they do not loose any quality from the prints.
your the best! thank you! 🎉@123-3D-UK
Does this have an Ethernet port on it or just Wifi?
There was a quick shot of the back and it looks like it has one
i hope elegoo will copy the heated vat function :D:D
I don't know if this a good thing, or a standard heat blower or heated band around the vat would have been better
Blowing warm air around the print has been shown to cause issues with prints, this can be in the form of prints splitting.
@@123-3D-UK thanks again!
Literally the only part in question is skipped. Screen protector.
The scarring is also due to the resin. It's due to a combination of brittleness and hardness of the high speed resin. I was sent 2 bottles with my M5s Pro. After 3 prints, I'm thoroughly disgusted with it. Supports flying all over the place when you remove them, small details breaking off during processing, and other issues (and I remove supports before curing so they are less hard than cured prints). My next print will be a 50/50 mix of Anycubic high speed resin and Sunlu Toughness.
All Anycubic did with their sample bottles is ensure I will never buy the high speed resin.
No ventilation again...
which is nice, I believe most of us have already use a growtent/greenhouse cover on shelf+ inline ventilation fan to sort it out.
I personally prefer this one, because it fits for my shelf.
@@MrKiar1611 the should make it metal like the revo, its not fine, its a real problem
@@patomaster95I don't get what you mean. Who cares about just ventilation the printer itself, when you have to vent out the whole work area out due to toxic fumes
@@vanilleshake3841 ... well its 2024 and they dont put a hole for ventilation for an extractor