DIY Diode laser Engraving Machine using Arduino | 5.5W CNC Laser Engraver/Cutter | Sculpfun S9
Вставка
- Опубліковано 26 сер 2024
- In this video we will be making a DIY laser Engraver using Arduino.
JLCPCB - PCBA from $0(Free Setup, Free Stencil), Register To Get Coupons Here:jlcpcb.com/IYB
Required Parts -
1. 2020 and 2040 Aluminium profile
2. Neema 17 stepper motors
3. MGN12H linear rails
4. 5.5W Laser module
5. M3 t-nuts and bolts
6. M3 threaded brass inserts
7. M4 t-nuts and bolts
8. M5 nuts and bolts
9. Arduino Uno
10. CNC Grbl Shield
11. DVR8825 stepper motor drivers
12. GT2 timing belt, GT2 pulley(20 teeth) and idler pulley
13. 2020 Aluminum Profile Corner Angle Bracket
14. 3d printed parts
15. 3mm Nylon Zip ties
16. POM Wheels with 625zz
17. Rubber feets
Link to circuit diagram, gerber files and STL's - drive.google.c...
Cable chain - www.thingivers...
GRBL firmware - github.com/grb...
Lightburn - lightburnsoftw...
For more information comment below.
Purchase links: (SCULPFUN S9 laser module)
TOMTOP: www.tomtop.com...
Banggood (Global delivery): www.banggood.c...
Aliexpress (Global delivery): mtw.so/6nERDY
Amazon (Overseas warehouse Fast delivery ): mtw.so/616JFN
Alibaba.com (Low batch price ): mtw.so/5LnTuC
Geek buying（EU）：www.geekbuying...
Geek buying（US）：www.geekbuying...
Purchase links: (SCULPFUN S9)
Banggood (Global delivery): ban.ggood.vip/...
Aliexpress (Global delivery):mtw.so/68Cq6C
Amazon (Overseas warehouse Fast delivery ):mtw.so/5Exc1t
Amazon (For Europe): www.amazon.de/...
Geek buying（EU）：www.geekbuying...
Geek buying（US）：www.geekbuying... Alibaba.com (Low batch price ):mtw.so/5UGFjw
---------------------------------------------------------------------------
Music by INOSSI
Listen: spoti.fi/2EzvEA6
Watch: • INOSSI - Waiting (Offi...
---------------------------------------------------------------------------
#Arduino #grbl #laser
Hi dear friend, thank you for sharing this interesting idea. But the description of how to make it is very incomplete. And the manufacturer must rely on his imagination, including the description of the electronics of the device, the dimensions of the profiles and the rail and wagon, and having a bom to prepare the parts. I hope you add them to Google Drive if you have them, because I wanted to make this. Thankful. Vahid from Iran
I started building this engraver and found a couple of issues with the STLs. The bottom plate and base plate were too wide, the 625zz wheels would not tighten up to the 2040 extrusion. I edited the STLs for these parts, removing 3mm from the longest dimension. Base plate became 106mm wide and the bottom plate 82mm. That will tighten up the fit. I added a jumper from the 12V input to pin 31 on the Arduino Nano, which is voltage in. End stops for home position of X and Y were also added (not shown in the video). A great project, but many details weren't mentioned or shown in the video.
Thank you pointing it out. However for me this was not the case.
I have not added End stops that's why it's not shown in the video.
5v can supply from usb??, It is not stand alone so you dont need Vin
@@piyanopnuchanat You still need 12V to power the laser and stepper motors, so adding a jumper wire from 12V in to Vin, the Arduino is powered from the 12VDC power supply
@@LoopLinks Correct, the lack of end stops is obvious from the video. I also downloaded LaserGRBL that has the ability to update firmware to a custom build that doesn't use Z axis, therefore allowing the machine to home without failure.
I want to do this project too. Can you please post the modify files and schematic for the jumper, end stops ?
hey, nice work, can you save a picture without the Stepper Driver in your Cloud? I will see what is under the Stepper drivers. Jumpers, Kondensators etc. Thanks a lot and nice regards from Berlin, Germany 😇
What are the measurements of the aluminum profiles?
I like to know that to 😢
Good design, have to move big hole in Y base 1 mm in STL file, very solid. I use to engrave PCB without problem. thank you for the design. The PCB was very good, I use it for all of my laser include 100x100 cm one. from thailand
For pcb, you can use the original because it can use 5v from usb port🎉
Te adoro, estaba buscando este video para un proyecto del liceo jajaja
Please, length MGN12H, profiles.
Excelente amigo , solo falta un tutorial para proceder a manejar super maquina meker te felicito eres mi sen sey jajajja
There's absolutely no reason for this machine to be cantilever. you can see it sag when it travels farther out. It's ruining your burns due to it going out of focus. just properly constrain it instead of trying to make it look cool.
I was thinking the same.... all these designs have this problem....it is easy to solve with the motor move further out. so it is in balance... with possibly a wheel touching the base
🎉Hi dear friend, thank you for sharing this interesting idea. But the description of how to make it is very incomplete. And the manufacturer must rely on his imagination, including the description of the electronics of the device, the dimensions of the profiles and the rail and wagon, and having a bom to prepare the parts. I hope you add them to Google Drive if you have them, because I wanted to make this. Thankful. Vahid from Iran
Whats the dimensions of the aliminium profiles? Thanks
Please could you provide me with the measurements of the profiles and the rail? thank you
FANTÁSTICO !!!
I don't know how to order parts. Can you tell me. How to do that? Thank you
Great job! 👍🏼
Thanks!
I can't find the lengths of the rail and the extrusions. Am I missing something?
Great achievement! And thanks for sharing this. I see you're also using a larger 2040 extrusion to support the platform on wheels (with the moving stepper). It offers more rigidity than a 2020 extrusion there. My project would be different though: tweaking your idea by making a more conventional but bigger rectangular setup with opposite parallel extrusions on both ends (width and length), do you think the longest extrusions (so including one guiding the wheeled platform) can be reduced to 2020? There would be two of them, one on each long side of the machine.
Thanks! Yes you can use 2020 extrusions...there are many commercial laser engravers using 2020 extrusions only. Mine is a cantilever design so I used 2040. Although machine is still not rigid when laser is at extreme corner...there is a slight play at the corner 13:18
@@LoopLinks Yes, I saw it moving slightly due to weight. I must say the main problem with DIY solutions (Cantilever design like yours, or square frame) is finally the very high price point of a 5.5W (true optical power, not the advertised _consumed_ power, which is a trick) laser module when it is sold separately.
That's where Chinese brands like Ortur, Atomstack, Sculpfun, etc. are very competitive because they offer the whole product (including the laser) at an incredible low price (often sold with special flash offers).
So besides the DIY route (time consuming!) I am currently considering a brand new AtomStack A5 Pro+ under $250. It has a laser with "compression beam technology" (lenses that stretches the spot vertically according to a 2D chord, allowing to decrease the width of cut + cut thicker materials) and a tinted lasertight window making it unnecessary to wear protective eyewear.
@@LoopLinks I think that a plate made out of aluminum to connect the two axis might have less deflection.
@@LoopLinks Can you give your whatsapp number or fb account link I need your help do my project
The Excellent Job
👍
can someone help me my lazer device isn't working well the fan keeps on moving in pulses and the lazer isn't functioning .. how to fix it ?
Hello and thank you for this beautiful project. I would like to recreate this, but I need to make a few small changes to be able to use my modified components. Would you kindly send me your step files or post them?
Kind regards Stefan
Can you cut 5mm balsa wood sheet using this machine
great work on the machine. is it possible to have the SolidWorks file for it?
I had the board made - there are no indications of pin orientation for the capacitors that go under the stepper drivers. Care to clue us in on which way they go?
Sorry I forgot to add silkscreen. Pin adjacent to EN silkscreen is the negative pin.
It's great but I have 1 query z+ of cnc shild is 5 volts and laser signal pwm is around 5 to 12v will laser work at its 100% or at it full potential?
yeah it will work at its full potential as it considers duty cycle.
As i can see VIN pin is in air, arduino gets power from usb? 12 volts only for steppers and laser?
Yes correct
what is under the Stepper drivers?
good morning do you have the drawings of the parts in 3d for sale
Can we enlarge the work area?
Yeah but you need to add a support to the x-axis from the other side. As in the end I showed how much x-axis is tilting in the corner where there is no support and due to that there were some imperfection in the engraving.
Great video, Where can I purchase the 3d printed parts?
Thanks
Hello, thank you for your work, I would rebuild your project, I also ordered the boards (PCBs). Can you please tell me which capacitors have to be soldered on the board? Thanks
Glad you liked it.
100uf 50V electrolytic capacitor. You can refer to schematic.pdf file - drive.google.com/drive/folders/1DyZ98v_PIQ7_Bw4f-NIXZyek-xcQtFoQ
@@LoopLinks All right, now I see that on the schematic where you say it. thanks 👍
Can it engrave pcb?
Nice job. Is it possible to make the same but with a large engraving area like 40cm by 40cm?
I would suggest you to go with the more rigid design which supports the x axis from both the ends.
@@LoopLinks Thank you
could you please share the code you used for this project?
Great job. Possible to share the arduino code?
I need help software regarding
Beautiful design. How much did it cost?
Thanks! I will let you know the cost in sometime.
It costed me roughly 200$
YAY COOL
Thanks!
I need help
do you have the stl files for the wire chain?
www.thingiverse.com/thing:1167746/files
hello friend... is the board can use for 12v or 24v with 80watt or higher? tq
Price
Can you share with us the arduino code?
I have uploaded GRBL firmware on Arduino whose link I have given in the description.
What are the measurements of the aluminum profiles?@@LoopLinks
Seen better but it's acceptable for a diy