because the load was empty robust plastic bottles, light enough to lift back onto the pallet by hand and incapable of damaging the roll cage. If he had lift a bit higher before pulling back out he would have been fine.
That was kinda dumb. Why is he trying to move two pallets at the same time? I wouldn't have done that because...ooh, I don't know, it's unsafe maybe? Or am I being silly?!? Trying to save time by cutting corners and not doing the job properly doesn't usually save time...as we've seen here! Has this guy got the hang of it yet?!
It’s poorly stacked first off BUT he should’ve lifted the top one mo matter how light that was the stack was awful he could’ve readjusted the top one then went for the two but idk man he didn’t care haha
UK, but they do this all over Europe. They must be allergic to pallet racking systems. Also check out the clamping forklift videos. stacking five washing machines high.
Those are empty pales not really a huge loss for them unless it falls on someone but as long as you’re inside a forklift then you should be alright. Pales with liquid inside is a different story
Actually these types of stackings r done in order to keep things safe...pallets live and if u would place them all ontop of eachother straight,they gonna drop in 2 weeks from vibrations...u need to stack in a way so u balance out the weight evenly
As much as I would like to speed up the work, I would not grab two pallets at once. I understand trying to get done quickly and efficiently but this mess just adds up way more work.
He could have taken both pallets just fine but he didn't push his forks all the way thru before lifting them, which is why the pallets starting swerving back and forth until the top pallet fell over.
Are you even a certified forklift operator? How come you didn’t notice that the pallets are not stack properly and you tried to lift it ? You need more training.
If he had moved the pallet on the floor in front first, he would have had more control of the stack he was trying to save and he would had been able to go all the way into the pallet rather than trying to grab it on the tip of the forks. He was doomed to fail because he was in too much of a hurry to do the job right the first time. .
This is a perfect example how most of the people are easily fooled by just marketing and telling them something as news or a trendy thing. Just like here the video suggest that we have a forklift operating failure going on here. But that is not the case. The real problem and the very first issue here is with the stacking of such pallets, which is 100% wrong and against every safety regulations. If anything, this video actually shows what will happen when you storage things wrongly in a warehouse.
It’s both, as a forklift operator he should have known that the top one was unstable, about to fall and taken that off first, followed by the other two, but yes those should not have been stacked like that
I don't really blame the operator in this situation, completely... b/c.. whoever stacked it before him, created a bad situation.. On that note, this video was just randomly recommended to me, I see it was posted in 2014, is the fork lift operator still alive?
Thats dangerous but then again its pallets of empty plastic containers i think. Probably wouldnt kill anyone besides the actual pallet lol. The driver was dumb tho.
Lmao u clearly dont know how to work with a forklift...Only reason this fell was cuz the dude went in fully topped out and pushed the pallet backwards going in,he is clearly still in training as it are empty cans
As forklift driver myself I don't understand why he didn't take the the top pallet first
I don't understand either.
because the load was empty robust plastic bottles, light enough to lift back onto the pallet by hand and incapable of damaging the roll cage. If he had lift a bit higher before pulling back out he would have been fine.
Because he's stupid and dont understand physics...
I don't even drive a forklift and I see how dumb that was
Its not complicated in the beginning. But then you get the hang of it
That was kinda dumb. Why is he trying to move two pallets at the same time? I wouldn't have done that because...ooh, I don't know, it's unsafe maybe? Or am I being silly?!? Trying to save time by cutting corners and not doing the job properly doesn't usually save time...as we've seen here! Has this guy got the hang of it yet?!
It’s poorly stacked first off BUT he should’ve lifted the top one mo matter how light that was the stack was awful he could’ve readjusted the top one then went for the two but idk man he didn’t care haha
It’s poorly stacked for one, it’s on a cheap- white wood pallet for two, and lastly yes he should’ve brought the load down one at a time.
There's a half ass workers at each company
He rolled up to that stack with just a little too much confidence
A total bruh moment.
BRUHHHH..
Look at the entire stacking job. I wouldn’t attempt to downstack a pallet anywhere in this place. Where are the safety standards in this warehouse???
UK, but they do this all over Europe. They must be allergic to pallet racking systems.
Also check out the clamping forklift videos. stacking five washing machines high.
Those are empty pales not really a huge loss for them unless it falls on someone but as long as you’re inside a forklift then you should be alright. Pales with liquid inside is a different story
They seem like empty containers. Not really anything dangerous. Other than not having hard hats.
Actually these types of stackings r done in order to keep things safe...pallets live and if u would place them all ontop of eachother straight,they gonna drop in 2 weeks from vibrations...u need to stack in a way so u balance out the weight evenly
Yea they fucking suck…
Forks was leaning downwards instead of straight
True, he should’ve gone into the pallet with straight forks
As much as I would like to speed up the work, I would not grab two pallets at once. I understand trying to get done quickly and efficiently but this mess just adds up way more work.
his forks werent leveled with the entire pallet.
The way those pallets are stacked, they are lucky something didn't collapse sideways into another stack!
Dude went in fully topped out lmfao
GOOD
He should take the first one and then take others
the fork might not go that high on this forklift, but yeah. Or just reverse waaaay slower and lower it as soon as possible
@@stefciok they go that high...trust.
You can tell this is normal day at work for them 😂
if i was your supervisor, you wouldnt drive forklift ever again in your life.
He already knew it was going to fall.
He could have taken both pallets just fine but he didn't push his forks all the way thru before lifting them, which is why the pallets starting swerving back and forth until the top pallet fell over.
Either start unstack from the top or go in straight, tilt, go up a lil bit, shift right, go up to clear it from the bottom pallet then back up
I'm guessing that the hard hats are on the
TOP SHELF?!
🤔🤣😂🤣
looks like a place full of clowns
well when having the beam adjusted to 22degree angle this is what you get
There's always one in every work place.
Are we just ignoring the fact this was 200 keys of coke 🧐🧐
🤣
At my job you would've been banned from driving for like a month and had to do a retraining.
you never unstack 2 pallets at a time esp with unstable product like these ones. Lucky it wasnt glass
Don't give this man the license for the love of god
where did you get your licence man peru !!!!
Esse aí comprou o certificado de empilhadeirista
Laziness, obviously should have taken top pallet first. Probably though, aaaahhh tiz only soft stuff.
Are you even a certified forklift operator? How come you didn’t notice that the pallets are not stack properly and you tried to lift it ? You need more training.
Should have taken the first one...
Lol is this Taylor Davies by any chance? I recognise them green pieces of paper, I buy from them. Cowboys.
Haha yes it is
If he had moved the pallet on the floor in front first, he would have had more control of the stack he was trying to save and he would had been able to go all the way into the pallet rather than trying to grab it on the tip of the forks. He was doomed to fail because he was in too much of a hurry to do the job right the first time. .
He should of just went into the top one and shifted his forks lol
Fired!
That wasn’t too bad.
Needs to retake his FLT test. Shocking
And this is why forklifts have cabins.
Who taught him how to work a forklift. The pallet fell just stop moving the vehicle. OSHA would have a field day
He's got lucky .
No big deal when it’s light Ass pallets. People make a big deal out of shit like this
Don't try and show off. Just get the stack down, starting with the top one that doesn't go past the back rest.
All he had to do was come down get a little tilt and come to in and lay back been doing this shit forever
Trying to be a hero!!!
Overhead guard did it's job. Now teach the driver not to lift more than one pallet at a time.
Good thing they had their safety vests on or that could have been a lot worse. /s
I didn't see the forklift fail. I did see a massive human fail though.
So many things wrong and to be honest... a less than fully competent driver.
The real problem was the palet had collapsed into the product it's sitting on, had to be restacked.
This guy doesn't care.
Why is this being filmed ? Its as if they knew something was going to happen.
Do you get used to that loud ass beeping?
should get one on top
first
What drinking on the job looks like
Yupp safety first it was crooked from the pull up take top one off first save urself from piss test.
What company is this? Lol
When the supervisor thinks he can do better
How do you stack like that and don't see safety problems
It's a genius! Lol
This is a perfect example how most of the people are easily fooled by just marketing and telling them something as news or a trendy thing. Just like here the video suggest that we have a forklift operating failure going on here. But that is not the case. The real problem and the very first issue here is with the stacking of such pallets, which is 100% wrong and against every safety regulations. If anything, this video actually shows what will happen when you storage things wrongly in a warehouse.
It’s both, as a forklift operator he should have known that the top one was unstable, about to fall and taken that off first, followed by the other two, but yes those should not have been stacked like that
He should have taken the top one down first.
I don't really blame the operator in this situation, completely... b/c.. whoever stacked it before him, created a bad situation..
On that note, this video was just randomly recommended to me, I see it was posted in 2014, is the fork lift operator still alive?
no man definitely not, 2014 was 80 years ago
so much forward tilt bruh, go in level, lift up 6 inches, tilt back
OR
grab the top one instead of trynna show off :)
Cant drive for shit he should of lowered it once he picked it up no reason to try to make adjustments while product Is In the air rookie move
Aí é pedir pra ser mandado embora mesmo kkkkkk
shit like that will humble you
That mission in GTA San Andreas
Senior citizens..... ...
Thats dangerous but then again its pallets of empty plastic containers i think. Probably wouldnt kill anyone besides the actual pallet lol. The driver was dumb tho.
Era la primera estiba que tubo que haber bajado.
With it being stacked like that it aint no wonder.
A driver NOT AN OPERATOR,takes skills and know how to do a well done job. Without an incident my friend.😑😐
Why didnt he just grab the top one instead of the 2nd to top one
The dude should of had his license taken away. Taking out a pallet with half the forks in if that is simply dangerous
右に振って左の引っ掛かってるのを回避した迄は良かったが、何故爪を下げた。
車体を後退させて一旦地面に２パレごと降ろし、１パレずつにして運ぶべきだったな、、、
Judging by his experience he’s done this before
Yo why not grab the top skid 1st ?
I had done it ,good video 🙂
What was the forklift for? Just go push over the pile.
Dava pra tirar o de cima
Why didn’t he just take the skids out one by one if he saw it leaning like that? That’s just common sense.
Not bad, it is 2 in 1 action😄
Вот это шляпа!
I beleive he should pass the exam once again
Tschüss zu Hause.
here before this blows up
Its been 6 years and still aint blow up
Nice stacking job! Can't blame the person anything. Atleast he try'd
mario
Was he sacked?
Cameraman predicted it?
Someone take that man's certificate away
Get two temps and have em restack it
Tilt up maybe?
Rookie
積み過ぎだよ！
Safety??? What is safety???
To się kurwa jedna paletę bierze
Does this guy have a brain? Why didnt he grab the very top one first and work his way down. And his forks were tilted down. Smh
driver fail
u shoulda took the top one first
Wat a thicko
Yea that was just bad stacking, the operator actually did a pretty good job of not panicking.
Lmao u clearly dont know how to work with a forklift...Only reason this fell was cuz the dude went in fully topped out and pushed the pallet backwards going in,he is clearly still in training as it are empty cans
めんどくさがる人はフォーク乗りに向いて無い
wtf hes he doing ahahahahahahah