walbro 450 600+hp on e85 whit relay i replaced it every year just to be on the safe size im also going all motor on my street car whit VP M5 race map whit a external FPR cant wait to see the numbers. been using walbro for years K.I.S.S.
So why is it called the hellcat is this what the hellcats come with for a pump in aftermarket translation? The reason I ask is I have a 16 hellcat challenger and as of now I dont need any crazy fuel pressure it's mostly stock on pump I just need a plug and play type kit that can be used for daily on pump and later on e85 and support 800 850hp just dont want this thing fucking up lines and other crap because its giving to much pressure. Also if I do this does it need a tune or will it except the old computer data and run fine after install. Pumps going out. Also if you have a pump that works was thinking the 525 but if you have reasons not to get it or if it needs special fittings please let me know.
I have the fore triple billet pumps for a 03-04 cobra and has 3 255 walbro pumps and I want to be able to run e85 with 1000 hp can I use 3 Walbro F90000267 to do that, its 3 6an lines into a single 8an line to the fuel rails
@@maperformance So I know this may sound stupid, but I just get anxiety around stuff like this because it costs money. I was moving my car parts for my upgrade into storage since I wont be upgrading for around 6 months, and I dropped my Walbro 255 fuel pump from about 2 meters high. It was in a box but no padding etc, and I am scared I have damaged it. It looks fine but some research shows that dropping them can cause them to become inoperable. Worried I am going to have to buy a new one.
So I bought a 525lph Hellcat for my turbo build on my bmw s54 e46 m3 I am shooting for 700+hp on pump, I won’t be running stock fuel lines, or fuel rail.
Great video! I currently have the 450 high pressure with a stm hard wire kit on my DSM. And made 480 hp. Currently trying to decide if I should upgrade to the 525 or just do a in line pump to compensate. Since I ran out of injector on the dyno the new 2150cc injectors will be going in. Pump gas car currently, might go e85 🤷🏽♂️
Most likely because of restriction. When you put the pump in a very small space it takes a lot to get the fuel into itself. So to do this is ramps up the speed to achieve the same intake of gas it usually does which causes it to over spin. Increased wear then failure is likely.
i I have a 2007 BMW e90 335i. In my vehicle the engine has been rebuilt and it has two t17 turbos. the pistons was enlarged. intercooler and all other systems were made. Now I plan to change the fuel system and get 800 hp +. Which of these systems would be appropriate for my vehicle to get more power? and I have jb4 chiptuning in my vehicle, I want to make port injection and methanol connections. thanks
On 6.1 HEMI with 6-7 psi of direct feed supercharger and I install a 112 psi pump how should I adjust my line psi with an adjustable psi regulator in the thank is 90 a good start point before I get to dyno test
Can I run the Hellcat on my F10 M5? Currently running full E85 with AN 8 fuel lines. I will really appreciate the help. I have been on hold for a while. Thanks
I have a Monte Carlo super sport. I'm putting a 5.3 truck Norris cam 92 mm intake and headers on nothing fancy but just feel like the 255 would be too little. Would the 450 be good for this motor?
Hey Leo, I have a 2020 Chevy Silverado 1500 no engine . Purchased a 427 self built ( don’t ask how much I’ve paid for it. It’s ridiculous ) short block Whipped LT. Anyway, I know you probably won’t get this message, but I’m looking for a fuel system for this truck. I can install two. Walboro 450, a Bean machine sump which I already have all the stuff for it. Flex fuel, methanol injection, Lingenfelter, Katech heads, Callies Magnum crank, Callies Compstar Rods. 1000hp+ daily driver. But anyway, how can you help me with fuel system like I said I have no intention on you replying to this, but I figured I’d write it anyway but I’m getting to that. I’m dropping my engine in right now..
Hey guys... Love the video... I have a question and hoping you can help me...??? My car is stock standard its 210hp currently Audi A4 Quattro... I am planning to forge the motor and drop a bigger turbo in later... So i thought of starting with some upgrades around the engine such as the feul pump, i am looking at the hellcat and want to know what will be the pros and cons if i install such a feul pump but motor is still stock...??? Will it cause any problems or will it be suitable for everyday drive...??? Thanks in advance :)
HEY! Do i need to do electronic adjustment to put this pump, I have the pump here at home but i dont know if i can put it or if I should to adjust electronics like with the exhaust system... thank you very much!
I'm doing a ls3 swap in my 04 infiniti g35 coupe, and I'm not boosting or using turbos, just installing a 3 stage cam, and won't be going over 500 hp, what is the perfect in tank pump that will work for me? a guy told me the Hellcat 525 is the way to go. Plz help, Thanks< video is very informative also... I sub
It doesn't causes shortage by E85??As if when you actually spliced the power and also spliced ground in an intake with regular butt connector. Am nervous as doing regular butt connector and planning on use E85.Didnt use heat shrink either. Kinda nervous !
ok here the thing...... i have an bmw e46 325i 2002 and have the engine m54 stock.....just want to change my fuel pump caus think is not at 100% so, thinking on make the change and upgrade the fuel pump....so i was thinkingo on a Walbro GST400. want to know if can be correct this option...
so do i need a turbo or a super charger just to replace my oem fuel pump to a performance based fuel pump, because im looking for better performance but without having go turbos , i have a 2015 honda accord v6 exl.
I know this is old but what would i use to replace stock pump for sc300 but I’m upgrading to a fuel cell ( to lower center of gravity ) but stock ecu and block. Will probably call you guys once i get the chance.
What AMP rating alternator is recommended for the 535?? Because I just installed this pump and my car is running lean. Cannot tune it out. My alternator is rated at 75 AMP.
When my car is at 3/4 of a tank full the car stutters in second and third when you do a full acceleration when you have a full fuel tank it runs great what do you think the issue could be?? I have a 450
I just bought a walbro 255 from this company and l was wondering if a tune was needed after install or am l good to drive around after ?? Its on an 05 wrx daily driver.
BULLI KID on my Jetta it only humm’s when I turn the key & don’t fully start it for about 3 seconds makes the noise, the noise is the fuel pump priming up
I have a Walbro 400 on my procharger Dodge Challenger with 600whp. The 400 is used with factory wiring with no issues. Now, I am steping up to over 800whp and I just purschase a Walbro 525. Will it be a plug and play now? Even with factory wiring?
Hi dears. My car is E36 M3 with engine S50B32 eurospec. Stock pressure regulator of fuel is 5bar but in tank i have stock bmw fuel pump which presses 3.5 bar. So im going to change it but which i should to search? Also, guys you are the best i have ordered some parts, great packaging and quality!)
I've also heard of this with Walbros but not much information out there, apparently they have a run time of only 500hrs. So if you are running one in a daily them they don't look like a smart choice
I just bought a 450 with the pigtail for my supercharged 6.1 hemi with 625whp. My question is will I need to add a fuel pressure regulator when I install the pump or will the factory regulator handle it?
I'm wanting to get about 800 RWHP from my gen4 5.3 with twin small 60's turbos. How about recommend a EXTERNAL inline fuel pump that can give me the flow and pressure I'll need!
Simple question: How on earth do you fit the supplied tube to the pump's barbed fitting? It's very, very tight and I'm afraid to break it... (walbro 450 kit for 335i)
Hi. How come you guys don't answer questions here? I am looking to buy a pump for my 2011 535i stock, I wanted to know if I could install a 450 model. Thank you.
If the wires on a walbro 255 are accidentally connected backwards, can the pump still effectively operate in reverse polarity. I plan on fixing this but I’m letting the fuel get low again to remove the pump also the car is fully built stock turbo 04 srt 4 . Currently on 4 lbs boost for break in period then going to 20 psi. Question of curiosity thanks
@@freddiemendoza4188 thanks for your input. You are correct it wouldn’t start as the pump was flowing in the opposite direction. I took the wires at the connector on the car side and switched positive and negative to make the pump flow to the engine and it works . Was curious if this would affect the performance in any way. Sry it’s complicated to explain but thank you sir .
Good evening I have benz c230 kompressor coupe serial # wdb7472a329031 super charged ENGINE had in a walbro fuel pump # pat5257916 which would be my best upgrade if you could send a link where it can be purchased I'd be grateful
thanks for the great info. Will dual 450s (not high pressure version) on a fore return system supply enough pressure for e85 on a 2015 mustang paxton kit? ~700whp
since I plan on once I buy my 2008 lancer evo gsr to have around 540 or so hp should i upgrade the fuel pump right away or wait till I get the turbo and the other performance parts installed and on the dyno?
I need to know if using the 400-1168 install kit on the 450 pump I just bought. It has a flexible plastic hose and just reg gear clamps Will the gear clamps hold on the plastic fuel line Ty Not impressed with walbro cheating out on this
The viper is out of our main niche cars so it might be difficult to find on our site, but feel free to give us a call or email sales@maperformance.com - we'd love to help out!! 🐍
Drop a comment for fuel pump daddy! 💦
im getting a 255 for my boosted ep3, do i need to buy it with the install kit?
walbro 450 600+hp on e85 whit relay i replaced it every year just to be on the safe size im also going all motor on my street car whit VP M5 race map whit a external FPR cant wait to see the numbers. been using walbro for years K.I.S.S.
So why is it called the hellcat is this what the hellcats come with for a pump in aftermarket translation? The reason I ask is I have a 16 hellcat challenger and as of now I dont need any crazy fuel pressure it's mostly stock on pump I just need a plug and play type kit that can be used for daily on pump and later on e85 and support 800 850hp just dont want this thing fucking up lines and other crap because its giving to much pressure. Also if I do this does it need a tune or will it except the old computer data and run fine after install. Pumps going out. Also if you have a pump that works was thinking the 525 but if you have reasons not to get it or if it needs special fittings please let me know.
I have the fore triple billet pumps for a 03-04 cobra and has 3 255 walbro pumps and I want to be able to run e85 with 1000 hp can I use 3 Walbro F90000267 to do that, its 3 6an lines into a single 8an line to the fuel rails
I have 01 Chevrolet truck 5.3 going to put the tbss intake and injectors with a bigger cam factory isn't holding up what do you think I need
Would be great to have a vid on how to plumb a double or tripple pump setup... also how to go about twin entry on fuel rails.
Lol I was pretty entertained watching this thanks dude
This video has gotten me so pumped!!
Get pumped Derrick!!
@@maperformance So I know this may sound stupid, but I just get anxiety around stuff like this because it costs money.
I was moving my car parts for my upgrade into storage since I wont be upgrading for around 6 months, and I dropped my Walbro 255 fuel pump from about 2 meters high.
It was in a box but no padding etc, and I am scared I have damaged it. It looks fine but some research shows that dropping them can cause them to become inoperable.
Worried I am going to have to buy a new one.
Hi I need to replace the Walbro pumps on two Detroit diesel 6-71 turbo marine engines
So I bought a 525lph Hellcat for my turbo build on my bmw s54 e46 m3 I am shooting for 700+hp on pump, I won’t be running stock fuel lines, or fuel rail.
Great video! I currently have the 450 high pressure with a stm hard wire kit on my DSM. And made 480 hp. Currently trying to decide if I should upgrade to the 525 or just do a in line pump to compensate. Since I ran out of injector on the dyno the new 2150cc injectors will be going in. Pump gas car currently, might go e85 🤷🏽♂️
Vic give us a call or email sales@maperformance.com - we'd love to help out!
You'll get better hp n tq with the e85 just a less common fuel.. I have a switch for my ECU to switch between tunes e85 n 91
I have that Walbro 450..... nice.👍 thank you for the info on the wire kit from DeatschWerks....I wondered about that when I installed my W-450...
Thanks for watching Craig!
That's a cool DSM right there! 6:50
Thanks for taking the effort to make this video. Great editing
Thanks for the info. Just got my 525 installed with my 1700ID's 😃
PWM Pulse width modulation makes the most sense to ,me.. I am looking to do an LS swap into a car that had a carburetor and 6 psi pump
This video has me so lit rn 😂 hellcat pump ftw
Iv'e had two walbro 460's fail in two years...dont know why...but i'm over it.
Most likely because of restriction. When you put the pump in a very small space it takes a lot to get the fuel into itself. So to do this is ramps up the speed to achieve the same intake of gas it usually does which causes it to over spin. Increased wear then failure is likely.
Excellent content 💪💪, I'd like to know more about your inline pumps since I'm needing a second or third one. On my way too 800-1000whp. 2jz! Thanks
Shoot us an email! sales@maperformance.com 🤘
@@maperformance watch for my email! I'll be asking about the turbo caprice!
Great news ! Which of these pump would you recommend for my Mitsubishi 4g64 year 2001 chariot grandis
i I have a 2007 BMW e90 335i. In my vehicle the engine has been rebuilt and it has two t17 turbos. the pistons was enlarged. intercooler and all other systems were made. Now I plan to change the fuel system and get 800 hp +. Which of these systems would be appropriate for my vehicle to get more power? and I have jb4 chiptuning in my vehicle, I want to make port injection and methanol connections. thanks
Shoot us an email: sales@maperformance.com we'd love to talk specifics with you!
On 6.1 HEMI
with 6-7 psi of direct feed supercharger and I install a 112 psi pump how should I adjust my line psi with an adjustable psi regulator in the thank is 90 a good start point before I get to dyno test
Can I run the Hellcat on my F10 M5? Currently running full E85 with AN 8 fuel lines. I will really appreciate the help. I have been on hold for a while. Thanks
I have a 1999 Ford f350 supercharged forged V10 running a boostapump what size of pump do you suggest thanks.
When it comes time for this upgrade i'll definitely give you guys a call.
Awesome! Looking forward to getting that Evo some more fuel!
We need a install video
I have a Monte Carlo super sport. I'm putting a 5.3 truck Norris cam 92 mm intake and headers on nothing fancy but just feel like the 255 would be too little. Would the 450 be good for this motor?
Hey Leo, I have a 2020 Chevy Silverado 1500 no engine . Purchased a 427 self built ( don’t ask how much I’ve paid for it. It’s ridiculous ) short block Whipped LT. Anyway, I know you probably won’t get this message, but I’m looking for a fuel system for this truck. I can install two. Walboro 450, a Bean machine sump which I already have all the stuff for it. Flex fuel, methanol injection, Lingenfelter, Katech heads, Callies Magnum crank, Callies Compstar Rods. 1000hp+ daily driver. But anyway, how can you help me with fuel system like I said I have no intention on you replying to this, but I figured I’d write it anyway but I’m getting to that. I’m dropping my engine in right now..
Hey guys... Love the video... I have a question and hoping you can help me...??? My car is stock standard its 210hp currently Audi A4 Quattro... I am planning to forge the motor and drop a bigger turbo in later... So i thought of starting with some upgrades around the engine such as the feul pump, i am looking at the hellcat and want to know what will be the pros and cons if i install such a feul pump but motor is still stock...??? Will it cause any problems or will it be suitable for everyday drive...??? Thanks in advance :)
Great questions, we'd love to talk specifics can you shoot us an email: sales@maperformance.com - just easier to go over your situation 🤘
Does anyone know how to put a walbro pump in a 2010 Tahoe,it won't fit in the drum
Leo getting it done! Great vid bro!
My 2017 jeep srt is stock and the factory fuel pump failed so Can I replace it with this pump for daily use?
Please help me wire the 525 to my x6M the ekps module has 5 wires going to the fuel pump...
HEY!
Do i need to do electronic adjustment to put this pump, I have the pump here at home but i dont know if i can put it or if I should to adjust electronics like with the exhaust system...
thank you very much!
Nice work I say have more than u need and call it a day lol especially since price isn't much different
I'm doing a ls3 swap in my 04 infiniti g35 coupe, and I'm not boosting or using turbos, just installing a 3 stage cam, and won't be going over 500 hp, what is the perfect in tank pump that will work for me? a guy told me the Hellcat 525 is the way to go. Plz help, Thanks< video is very informative also... I sub
It doesn't causes shortage by E85??As if when you actually spliced the power and also spliced ground in an intake with regular butt connector. Am nervous as doing regular butt connector and planning on use E85.Didnt use heat shrink either. Kinda nervous !
I have 2 450 pumps, and I wanted to know how can you tell if your pump has a internal check valve??
Is there a saddle fuel tank option for use in conjunction with a syphon pump? AWD split tank applications
ok here the thing...... i have an bmw e46 325i 2002 and have the engine m54 stock.....just want to change my fuel pump caus think is not at 100% so, thinking on make the change and upgrade the fuel pump....so i was thinkingo on a Walbro GST400. want to know if can be correct this option...
so do i need a turbo or a super charger just to replace my oem fuel pump to a performance based fuel pump, because im looking for better performance but without having go turbos , i have a 2015 honda accord v6 exl.
MY 525 WALBRO PUMP MIGHT NEED PEPLACING? THE RELAY IS GETTING HOT AND THE CAR SEEMS TO START MISSING AT IDLE
I know this is old but what would i use to replace stock pump for sc300 but I’m upgrading to a fuel cell ( to lower center of gravity ) but stock ecu and block. Will probably call you guys once i get the chance.
Hi, which pump will be appropriate to be used on a BMW E70 N62 engine? The engine makes about 350 bhp.
What size fuel # AN line size would you use for 450 high pressure pump & 525 LHI when using E-85 fuel?
I own a lexus RX450H 2010 model running with ethanol wich pump do you rcommend , i still have the oem Aisan pump
What AMP rating alternator is recommended for the 535?? Because I just installed this pump and my car is running lean. Cannot tune it out. My alternator is rated at 75 AMP.
When my car is at 3/4 of a tank full the car stutters in second and third when you do a full acceleration when you have a full fuel tank it runs great what do you think the issue could be?? I have a 450
I have 440cc injections and I was wondering if I could use my hellcat pump, n/a
How well do the 450’s pull?
Hey gnt am living in Jamaica I have a k2o Honda engine nun turbo what the best pump I can use in fuel tank tank tank
Very Good Video. Well Done
Thanks for watching!
I just bought a walbro 255 from this company and l was wondering if a tune was needed after install or am l good to drive around after ?? Its on an 05 wrx daily driver.
Which pump do I need for a 2011 Silverado 4.8L Flex Fuel under turbo pushing 650RWHP?
Great video!!
Thanks for watching Matthew!
I’m looking at a turbo Scion tC turbo and the fuel pump is making a loud buzzing/ humming all the time. Is that normal??
BULLI KID on my Jetta it only humm’s when I turn the key & don’t fully start it for about 3 seconds makes the noise, the noise is the fuel pump priming up
This scion is non stop when idle and driving. Very loud and noticible
I have an 1999 honda prelude automatic all stock.. can i use a 255 lph walbro gas pump to update my old fuel pump?
Absolutely, give us a call or email us and we can get you the right pump & filter combo for your ride!
I have a Walbro 400 on my procharger Dodge Challenger with 600whp. The 400 is used with factory wiring with no issues.
Now, I am steping up to over 800whp and I just purschase a Walbro 525. Will it be a plug and play now? Even with factory wiring?
Cesar, shoot us an email: sales@maperformance.com 🤘
Hi dears. My car is E36 M3 with engine S50B32 eurospec. Stock pressure regulator of fuel is 5bar but in tank i have stock bmw fuel pump which presses 3.5 bar. So im going to change it but which i should to search? Also, guys you are the best i have ordered some parts, great packaging and quality!)
Give us a shout Altun! sales@maperformance.com
so anybody else been having failing 525s? i went through 2 in a year and i seen a few other posts saying theirs failed also
I've also heard of this with Walbros but not much information out there, apparently they have a run time of only 500hrs. So if you are running one in a daily them they don't look like a smart choice
Bump
Did yours just stop working or were you losing pressure?
Ay.. Lets go over fa20 motors and upgrade bolt on turbo and rotated turbos for it... I need that next. Lol
We could certainly do that one!
@@maperformance
Lets see it i need that next.
I have a 2018 Honda Civic si, I was wondering if you have any pumps for e85 for that car
We can hook it up, give us a call or email: sales@maperformance.com 🤘
Hellcat is 80psi+? Say, a 2jz is optimal forc35-45psi, so with a single hellcat, it won't ever be sufficient for its fuel rating?
Hi for a Mercedes c63 2009 whit ecu tuning 511hp what is the correct for this car ?
I just bought a 450 with the pigtail for my supercharged 6.1 hemi with 625whp. My question is will I need to add a fuel pressure regulator when I install the pump or will the factory regulator handle it?
Shoot us an email Timothy! We would love to help out. Leo@maperformance.com or ext 107
Where can I buy a walbro 525 and know its the real deal that won't fale on me?
Hello what reference for a mk7 gti please ? In 450l/h
450 high pressure for a 5.7 twin turbo hemi? Hoping to get 600 on e85
Hey just wondering I have a XR6T 1000cc injectors and have a 400 walbro looking to get 400kw do u think that's enough?
I'm wanting to get about 800 RWHP from my gen4 5.3 with twin small 60's turbos. How about recommend a EXTERNAL inline fuel pump that can give me the flow and pressure I'll need!
Shoot us an email! Sales@maperformance.com we'd love to help out!
Does the walbro 465 have a check valve built in?
Simple question: How on earth do you fit the supplied tube to the pump's barbed fitting? It's very, very tight and I'm afraid to break it... (walbro 450 kit for 335i)
Heat it up with a heat gun and gently start pulling. Same way when installing if you want to use the same tube.
Do you need a return line system for the 525??
I want a fuel pump for a Subaru Outback 2002 stock what's the highest I can do
Can u tell me wat pump can I use on 4 cylinder engine for 300 to 500 hp the engine is 4g94, 4g93, 4g92? And wat is the price? It for a ck2 lancer
Give us a call at 651-348-8811 and we will be able to answer all your questions!
How much does the hellcat pump and next down version flow at 100psi?
i have walbro 450 but im having hard time hardwiring this and i dont see any great install video.
Hi. How come you guys don't answer questions here? I am looking to buy a pump for my 2011 535i stock, I wanted to know if I could install a 450 model. Thank you.
Hi! Send us an email at sales@maperformance.com and we can answer all your questions!
Yeah but do they drop right in or do you have to buy modification kit or a different fuel pump housing
What pump and platform are you looking at?
The hellcat one
@@maperformance 04 g35 the 525
Good day,
I have tahoe 1999 & I would like to install walbro pump. How is the quality of Walbro?
One of the best in the business! Definitely a quality unit!
Sup which one is the best for everyday driving and for street drag the engine is a Toyota 4afe with the injector in the head
Arif shoot us an email: sales@maperformance.com - we'd love to help out!
Is the Holley 470 also known as the Hellcat?
Thank you for doing this videos
Glad to help!
If the wires on a walbro 255 are accidentally connected backwards, can the pump still effectively operate in reverse polarity. I plan on fixing this but I’m letting the fuel get low again to remove the pump also the car is fully built stock turbo 04 srt 4 . Currently on 4 lbs boost for break in period then going to 20 psi. Question of curiosity thanks
I wouldn’t think your car would start. At least that would be the case on the car I have.
@@freddiemendoza4188 thanks for your input. You are correct it wouldn’t start as the pump was flowing in the opposite direction. I took the wires at the connector on the car side and switched positive and negative to make the pump flow to the engine and it works . Was curious if this would affect the performance in any way. Sry it’s complicated to explain but thank you sir .
Good evening I have benz c230 kompressor coupe serial # wdb7472a329031 super charged ENGINE had in a walbro fuel pump # pat5257916 which would be my best upgrade if you could send a link where it can be purchased I'd be grateful
Can I add fuel pump to 1980 Honda CB900c
You did say nothing about the 255LPH pomp why is that??
Love ur video, which of the pumps will be good for my bmw x3 e83 inline 6. Having pump issues, help pls
Samuel give us a shout: sales@maperformance.com we'd love to help you out.
255lph should be sufficient, mine e46 m3 using it and pretty happy with it so far.
Do I need a wiring upgrade if I use a 255?
So let's say I have a supercharged 800whp pump gas plus water/methanol injection, what pump shall I pick?? 450 high pressure or 525🙄
525 is what we would recommend 💪
@@maperformance
Thanks for the help I really appreciate it
Definitely 525. Id always like to have some extra wiggle room with factory specs.
thanks for the great info. Will dual 450s (not high pressure version) on a fore return system supply enough pressure for e85 on a 2015 mustang paxton kit? ~700whp
Give Leo a call! Ext 107 🤘
Umm I ordered a 535 walbro for my n54 335i
since I plan on once I buy my 2008 lancer evo gsr to have around 540 or so hp should i upgrade the fuel pump right away or wait till I get the turbo and the other performance parts installed and on the dyno?
Hey! Shoot us an email we'd love to help: sales@maperformance.com
Are all walbro's ethanol proof? looking at a small 255 for my trackcar. Stock pump died
Give us a shout: sales@maperformance.com
What would you recommend for 500whp on Subaru for pump gas?
Give us a shout Derrick! We'd love to have Leo or someone help you out on that one.
I need to know if using the 400-1168 install kit on the 450 pump I just bought. It has a flexible plastic hose and just reg gear clamps
Will the gear clamps hold on the plastic fuel line
Ty
Not impressed with walbro cheating out on this
Hey Ben, give us a shout! We should be able to help answer that.
What kind of Walbro pumps can I install on my 2003 Mitsubishi Eclipse gt 3.0 V6 ??
Hey Jay! Give us a call we'd love to help out with that Eclipse!
What Intank pump do you recommend for a fwd Seat Leon 20vt approx. 600whp ?
Which is easier to put on?
Shoot Leo an email or call: ext 107 or leo@maperformance.com
You have no listings in your catalog or online for Dodge Vipers. Viper guys run Walbros. What am I missing?
The viper is out of our main niche cars so it might be difficult to find on our site, but feel free to give us a call or email sales@maperformance.com - we'd love to help out!! 🐍
I’m trying to make insane power in my 4 cylinder can I get away with 500 horsepower stock fuel pump?
No
@@rickey2409 it made 385 before fuel issues lmao
That’s crazy. You did say 500 though.
180SR TYPE X, WITH T25G TURBO , WHICH ONE SHOULD I GET???
Email us! Sales@maperformance.com
Need a pump for my ls motor 83 monte with 88 gas tank 4.3 pump in tank
You guys got an external 450lph? These all look like internal tank pumps?
Yes these are - we do have ones but not really a 450. Feel free to give us a call or email: sales@maperformance.com
Which pump for a 6.5 diesel stock 1998?
Give us a shout Dave! sales@maperformance.com