@Mr_big_foot831 I think it should look really good. That's kinda where I got the idea for a flat front light. Just play with different mounting points of the light, then take pictures to set it where you think it's best. I probably will have to adjust your light beam to reach distance and possibly remove the tension springs.
@PowerPedal0000 52v battery should work, but I haven't tried it yet. 52v 20ah 40amps would be the size you would want to run. Controllers are tricky because most of them are specific to certain lcd screens and throttles. Bac855 would be a good choice if you want to keep it hidden in the stock box. To be honest stock with all the settings turned up are completely fine. Ride it first Dnm burner is a common shock, but you will need bushings to keep it snug. Front shock there are only 2 options that I found same manufacturer, just different names and one is longer. Get the shorter one. Ebay or express Don't rush it because you will make mistakes like I did. Good luck with your build.
@corybradley1126 this is where I'm at with power.... I fried my screen the first time I ordered my lights. I reordered another screen and controller just in case. The controller sent is slightly different in programming and wires. Take off is smooth with no stutter but at 20mph stutters ,with a quick release then throttle get up to 33mph. The older controller has slight cog on take off but feels a little better with torque range and doesn't stutter at 20mph or anywhere besides take off. On that original I took it apart to shunt mod. I started the process but haven't installed it yet Or I keep the newr controller and go 52v. I'm stuck on which way to go on this. If I go 52v will I loose all my lighting? What are your thoughts on my situation?
I love what you did with your headlight/fairings. Could you point me in the right direction which Ktm light/fairing you used? Also, is it just plug and play with your normal controller plug in?
Of course, the light can be found on aliexpress. There are several different light designs but most of the framing are bigger. This hasthe smallest profile to fit a 20" . The bottom mount is for a turn signal top is stock. Comes with a mounting kit but looks terrible Only thing you need is a 48v to 12v converter and low and high beam switch 12v. Simple install but finding the correct beam height is tricky, just remove the level adjustment screw take out the spring the applies pressure on that screw. Then put the screw back without it.
It’s aluminum . I have the same e-bike. It’s a great bike and it goes fast when you unlock it. Mine reaches 41 mph. Fast enough to get me around where I live. I love it
@stingraykoltes9750 torque is around 100nm top speed 34mph. It's a 1500w hub 48v battery. The light does go on sale from time to time, and make sure you install a 48v to 12v converter & hi/low 12v headlight switch. a.aliexpress.com/_mOsl2ss
That's hydro dip from the factory. I have seen a wrapped case looks good but I'm sure it's hard to do. If you do probably want to do a template cut first, anything non stick . Make some mistakes, then try the carbon.
@Bathroomdestroyer9000 left grip has an Allen screw on the tunnel signal switch. When loose, pull the switch away from the grip. From there just pull the grip off. Throttle side is the same, but the grip is attached. Pull the grip off if you when attached to the bike if you just changing grips. You might have to release the cable ties to reach all the way off the bar. If you go taller bars, install the grips before you attach to stem
@Mr_big_foot831 if you hit 40 mph, then you unlocked your wheel collaboration to the wrong diameter. Unless you're riding a 26", 48v or 52v can't hit 40mph unless you have a 2000w hub motor, so your settings might be off by a lot.
@Mr_big_foot831 no not at all it's just not an accurate speed. From what you explained your bike is a fat 20in your tire size should be around 23 in the settings I believe it's under 6 or around one of those.
@jeremybeck517 The only way to put on BMX grips is need to change to a thumb throttle. This is a full twist, so dirt bike grips would be the best option.
@edwardyoung5703 Throne handlebars by 2 wheel gang 4pc bars and box 53mm forward stem. There is a rise limit because of the brake lines. What I had to do was cut the zip tie and run that line above the crank bb spindle. Only need to remove the pedal. No bars above 6" will work.
@nestoramadoranonuevo7466 I'm 250lbs & live next to dirt bike trails on a mountain and street hills everywhere. My average speed is 20mph uphill. No pedaling.
@Erdick I can't tell you where to buy it but here are the prices. Alibaba $850. Picked up in So Cal. I personally don't know what a shipping price would be. x.alibaba.com/AwpNxk?ck=pdp This is the link directly from my rep Cecilia. You speak with her directly. She is absolutely awesome and responds quickly. Or you can always buy direct. $1299. + shipping and tax The best thing would be getting a total checkout price on both. I personally like having Cecilia available for any questions I have but completely up to you. Good luck, and let me know if you get one. I'll make another video for you on settings.
I purchased this bike last year before it became a popular rebrand. When first released, there were only 2 models, S1 and S2. I'm not sure why the name changed, but yes they currently call it a jaguar. If you go to the website and read all the descriptions every paragraph call it an S2. Here is one of them... Being the top of the line, the 20*4.0″ fat tire AKEZ E-Bike S2 presents power, functionality, and beauty all in one. It will take you faster and further across any terrain in comfort. This bike is a real beast!
This is a 48v/18ah, 28amp controller, low torque motor maybe 1500W this is not comparable to the GhostCat 52v/20ah battery, 40amp controller, high torque 140nm 1500W motor.
@Brianelectrify there was no comparison mentioned, although It is the same bike as the ghostcat f1. I'm showing crank length, signal speed conversion, BMX bars, hi/low beam headlight, inverted mirrors, and rear spring upgrade. All things that could help a taller rider with comfort and safety. 48v 1500w is not low torque. Can a super 73 go 20+ uphill or 34mph on flat ground?
@@ixclusiverc yea never heard anything about a comparison lol I’m installing a 52v 20ah battery when mine arrives Tuesday Samsung 40T. Might upgrade controller and display to 52v system 45-60 amp draw
@felixvalvaneda2285 🙌 I'm very interested to hear about your upgrades. If you go 52v, what controller are you thinking about? Sabvoton are medium size and needs to be bolted under the seat. I was also considering the bac855 as that one is small enough to fit into the stock crotroller compartment. I did get an extra controller from akez to possibly try to shunt mod the stock one. What are your thoughts, my man?
Looks cool. I ordered a knock off version of the super 73 light and cover. Hopefully it will look nice like yours .
@Mr_big_foot831 I think it should look really good. That's kinda where I got the idea for a flat front light. Just play with different mounting points of the light, then take pictures to set it where you think it's best. I probably will have to adjust your light beam to reach distance and possibly remove the tension springs.
You should add front turn signals. 👍
Didn't think about that. I'll start looking tonight. TY
Agre3d got tuen signal on taoci v07
Hey man, those lights are nice. Is that an entirely different headlight? If its the same stock, did you just attach that frame?
@saymyname6726 yes it's a different headlight. They are found on aliexpress under KTM headlight with many options. Then run a 48 to 12v converter
Hey!!!! Any way to raise the handlebars on these????
Hey can list links for products you used
Fr I want that front piece
I just got one, is there a 52v battery that fits? Upgraded controllers?? And where did you buy the shocks from? How do i know if they fit.
@PowerPedal0000 52v battery should work, but I haven't tried it yet. 52v 20ah 40amps would be the size you would want to run.
Controllers are tricky because most of them are specific to certain lcd screens and throttles. Bac855 would be a good choice if you want to keep it hidden in the stock box.
To be honest stock with all the settings turned up are completely fine. Ride it first
Dnm burner is a common shock, but you will need bushings to keep it snug. Front shock there are only 2 options that I found same manufacturer, just different names and one is longer. Get the shorter one.
Ebay or express
Don't rush it because you will make mistakes like I did.
Good luck with your build.
❤@@ixclusiverc
Did you do the 52v swap yet?
@corybradley1126 this is where I'm at with power.... I fried my screen the first time I ordered my lights. I reordered another screen and controller just in case.
The controller sent is slightly different in programming and wires.
Take off is smooth with no stutter but at 20mph stutters ,with a quick release then throttle get up to 33mph. The older controller has slight cog on take off but feels a little better with torque range and doesn't stutter at 20mph or anywhere besides take off.
On that original I took it apart to shunt mod. I started the process but haven't installed it yet Or I keep the newr controller and go 52v. I'm stuck on which way to go on this. If I go 52v will I loose all my lighting?
What are your thoughts on my situation?
The site have a 48v & 52v power option
I love what you did with your headlight/fairings. Could you point me in the right direction which Ktm light/fairing you used? Also, is it just plug and play with your normal controller plug in?
Of course, the light can be found on aliexpress. There are several different light designs but most of the framing are bigger. This hasthe smallest profile to fit a 20" .
The bottom mount is for a turn signal top is stock. Comes with a mounting kit but looks terrible
Only thing you need is a 48v to 12v converter and low and high beam switch 12v. Simple install but finding the correct beam height is tricky, just remove the level adjustment screw take out the spring the applies pressure on that screw. Then put the screw back without it.
@@ixclusiverc Thank you for the run down! It is SOO clean. Think I may do this to my ghostcat in the future.
The frame is aluminum or steel?
It’s aluminum . I have the same e-bike. It’s a great bike and it goes fast when you unlock it. Mine reaches 41 mph. Fast enough to get me around where I live. I love it
Verry nice modification ! Do you know how much speed and torque?
The Headlight also verry nice. Do you have some links for purchass the same?
Tx
@stingraykoltes9750 torque is around 100nm top speed 34mph. It's a 1500w hub 48v battery.
The light does go on sale from time to time, and make sure you install a 48v to 12v converter & hi/low 12v headlight switch.
a.aliexpress.com/_mOsl2ss
do you know the size of rear fork? 150mm, 170mm, 175mm? I am looking to buy an upgrade motor with this bike. I bet it is 170?
@TomasWatchReviews I would also say it's 170 because when you install the real wheel, there are 3 spacers and extra room before the nut is turned
So ghost cat copied them ?
I think ghost cat is ordering the bike frame from the same manufacturer
Did you put carbon fiber wrap on your battery ?? i wanted to do the same
That's hydro dip from the factory. I have seen a wrapped case looks good but I'm sure it's hard to do. If you do probably want to do a template cut first, anything non stick .
Make some mistakes, then try the carbon.
@@ixclusiverc yeah great advice ! thx
Do you know how to take off the grips on it I have so much trouble with it
@Bathroomdestroyer9000 left grip has an Allen screw on the tunnel signal switch. When loose, pull the switch away from the grip. From there just pull the grip off.
Throttle side is the same, but the grip is attached. Pull the grip off if you when attached to the bike if you just changing grips.
You might have to release the cable ties to reach all the way off the bar. If you go taller bars, install the grips before you attach to stem
How fast does this go? Top speed
@jeembaymusic5271 on average 33 to 34mph. That speed only feels comfortable on open roads.
I unlocked mine and it reaches 40mph.
@Mr_big_foot831 if you hit 40 mph, then you unlocked your wheel collaboration to the wrong diameter. Unless you're riding a 26",
48v or 52v can't hit 40mph unless you have a 2000w hub motor, so your settings might be off by a lot.
@@ixclusiverc should I change it? will it damage the hub motor ?
@Mr_big_foot831 no not at all it's just not an accurate speed. From what you explained your bike is a fat 20in your tire size should be around 23 in the settings I believe it's under 6 or around one of those.
Can you put new grips on in like odi grips ?
@jeremybeck517 The only way to put on BMX grips is need to change to a thumb throttle. This is a full twist, so dirt bike grips would be the best option.
What handkebar and stem did you use bud?
@edwardyoung5703 Throne handlebars by 2 wheel gang 4pc bars and box 53mm forward stem. There is a rise limit because of the brake lines. What I had to do was cut the zip tie and run that line above the crank bb spindle. Only need to remove the pedal. No bars above 6" will work.
Where can I get that front piece for my bike?
@@TruthNationUncensored aliexpress search KTM headlight. There are a bunch of different designs. 48 to 12v converter is needed.
How much you spend on that all together
I bought mine for 1,100 not including S&H or tax
Can it climb uphill?
@nestoramadoranonuevo7466 I'm 250lbs & live next to dirt bike trails on a mountain and street hills everywhere. My average speed is 20mph uphill. No pedaling.
@@ixclusiverc that’s nice thanks for this
Mine climbs up hills at 25 to 27 mph. This thing is a beast.
Should i get this ebike from their akez website?
@Erdick I can't tell you where to buy it but here are the prices.
Alibaba $850. Picked up in So Cal.
I personally don't know what a shipping price would be.
x.alibaba.com/AwpNxk?ck=pdp
This is the link directly from my rep Cecilia. You speak with her directly. She is absolutely awesome and responds quickly.
Or you can always buy direct.
$1299. + shipping and tax
The best thing would be getting a total checkout price on both.
I personally like having Cecilia available for any questions I have but completely up to you. Good luck, and let me know if you get one. I'll make another video for you on settings.
@@ixclusivercthank you so much man
@@Erdick 👍
@@ixclusivercthat link isn’t taking me to cecilia, is there another way to contact her?
Did you buy it from Amazon?
This one is from alibaba. There are a few good one on Amazon that are just as good
Ridstar Q1
Hideos b6
Check those out.
@@ixclusivercghost cats are better
How much did you pay for that bike?
@erickdansan around $850, picked up locally in C.A. bike alone
With all the my upgrades, it's probably around $1100.
@@ixclusiverc thanks 🙏 for the info ℹ️ do you have the link to where you bought it?
@erickdansan good question. I talk to the rep all the time let me see if she can provide me a special link.
@erickdansan that's how fast she responds....
Her name is Cecelia, and here is the link
x.alibaba.com/AwpNxk?ck=pdp
@@ixclusivercthxs really appreciate looking forward to your content on this bike 🙌
That's not an S2, it's a JA1
I purchased this bike last year before it became a popular rebrand. When first released, there were only 2 models, S1 and S2. I'm not sure why the name changed, but yes they currently call it a jaguar.
If you go to the website and read all the descriptions every paragraph call it an S2. Here is one of them...
Being the top of the line, the 20*4.0″ fat tire AKEZ E-Bike S2 presents power, functionality, and beauty all in one. It will take you faster and further across any terrain in comfort. This bike is a real beast!
@@ixclusiverc aah ok, gotcha. Damn I hate this practice of messing with naming schemes, the market is already confusing enough
This is a 48v/18ah, 28amp controller, low torque motor maybe 1500W this is not comparable to the GhostCat 52v/20ah battery, 40amp controller, high torque 140nm 1500W motor.
@Brianelectrify there was no comparison mentioned, although It is the same bike as the ghostcat f1. I'm showing crank length, signal speed conversion, BMX bars, hi/low beam headlight, inverted mirrors, and rear spring upgrade. All things that could help a taller rider with comfort and safety.
48v 1500w is not low torque. Can a super 73 go 20+ uphill or 34mph on flat ground?
@@ixclusiverc yea never heard anything about a comparison lol I’m installing a 52v 20ah battery when mine arrives Tuesday Samsung 40T. Might upgrade controller and display to 52v system 45-60 amp draw
@felixvalvaneda2285 🙌 I'm very interested to hear about your upgrades. If you go 52v, what controller are you thinking about? Sabvoton are medium size and needs to be bolted under the seat. I was also considering the bac855 as that one is small enough to fit into the stock crotroller compartment. I did get an extra controller from akez to possibly try to shunt mod the stock one.
What are your thoughts, my man?
@@felixvalvaneda2285bro I have one, how do i get a bigger 52v battery and where from??
@@ixclusiverc same I was thinking of doing the bac855 as well sounds easier