I live in Valencia, a city in Spain where Beyma speakers are manufactured. I have been installing Beyma in all my cars for 25 years. And they have always been considered one of the best brands in the world. Congratulations on your video.
You're doing the community a great service. Most channels buy one speaker and say it's the best based on some bias or lack of comparison, you go the extra mile to compare them.
Just got the Beyma 6GM/Nd after watching these videos. The vocals and surprisingly the midbass sound excellent, controlled and real loud at high volume crossed between 80 hz -18db and 2.5khz -18db. Running on 400rms each in fully deadened doors. They'll even play down to 50 hz nicely with lower volume.
Add a dsp if you're going to run your midrange not midbass speakers at 50hz they can handle it but a dsp gives you full control and you can push these harder with steeper slopes on your crossover's
@@casemods My 6Gm/Nd's rated freq response is 90-12000 hz but not many people are going to high pass their midrange that high for any decent sq. The Prv is still very good but too peaky on the higher frequencies for me after hearing it in person
Listening on good Audio Technica headphones through a HiFi Quad Dac...to my ears the Beyma embarrassed the PRV. Smoother, more detailed, stronger midbass, and full sounding. The PRV, while not bad, just seemed harsh to me. Great for being heard over a few thousand watts of subwoofers, but on the sound quality side, didn't do much for my ears. Between the two I'd go Beyma all day. Paired with a nice set of tweeters, I'm sure they'd be much more pleasing, musically. I realize listening to speakers on UA-cam isn't ideal, but still, much can be heard and learned. Keep up the cool vids! Much enjoyed!
Love the reviews! Still waiting to hear a comparison with the Crescendo Mid-range models. Congrats on you're growing channel. Its nice to see mostly positive comments for a change. Keep up the good work.
Bro the new setup is looking sick 😍😍 no we talking, love how you growing this channel 😎💪 Orions1600 vs orions 1800 is what I'm waiting for.. Then winner vs prv 😊
Great review, I’ve never heard of beyma and so far they are my new favourite. Being in Australia we don’t get a lot of the brands you do and not many companies on amazon will ship to Australia. Keep up to good work mate.
Get a skybox from your local freight forwarders in Australia, that way you could ship to a city/port in the US and then to Australia. You pay more but you could buy anything online from Amazon, eBay etc……
You never heard of beyma because they are a pro-audio speaker not made for cars. Putting them in a car is just a step up as you are using the best speaker in the world for your car. PRV are built for cars and will never enter the ProAudio space for that reason.
I Ben a bass head for many many years and all my life I Ben searching for a hood mids holy moly that beyma speaker is no joke all day prv is ok but bayma is very very crisp loud
Guys we are failing to understand. I am a audio engineer and when we say midrange we talking about midrange and that means no highs over 6k and no lows lower then 1k. Baymas are doing the midrange right. The prv are to bright over 6k. The midrange vocal voice is not as sharp as bayma. Prv way to damn bright I don’t want highs and lows from midrange. All saying bayma will forever do the midrange correct.
Hi I have two suggestions (1) could you use a bandpass crossover to even out the playing Ground between the speakers because most people are going to use Tweeters with the speakers and (2) could you find a way to give the 8 ohms speaker's the same power versus 4 ohms speaker's that way it will be a fair comparison thanks amd I appreciate your efforts for the experimentation
Like he was saying these are on different spectrums for your midrange your beyma will play lower frequencies and your PRV will play higher frequencies they're both incredible speakers but you need to figure out what your going to need midrange wise neither 1 of there are midbass and depending on your application is it a car or a powersports vehicle since this is pro audio it doesn't need power to play loud don't get wrapped up in wattage
Had 4 of these prv on a 4,000 2 channel amp and they sound it amazing. Now have them on a taramps 2000x4 my other amp was way to big. Anyways they sure can take alot of power
I think people are confused because in the background the speakers spinning are opposite orientation compared to the way they are on the table, but clearly the prv's are better
This is an interesting review. I can see why the Beymas are more expensive. They both have their own strengths. You just have to pick what is the best for you. The beymas play lower, have a flatter response while the PRVs can give you that extra high frequencies, start tapering off at like 100 and something hz so your choice is based on preference. Keep this videos going! We support you
Thats a weird comparisson. One midwoofer can be able to reach 7 khz and the other 5khz. If you add tweeters and x-over at 3khz then it might be that the woofer that "only" reaches 5 khz linearly sounds better until 3khz than the one reaching 7khz sounds untill 3 khz. So you have to test them both low pass filtered at the same frequency if you want a realistic scenario. How high a midwoofer can reach is not enough to predict its sound quality. Aluminum membranes many times break up at 5-6 khz and yet some of the best 2 way monitors have these aluminum drivers cause they sound superb all up until 4khz. So either lowpass filter the woofers at 3-4 khz (both at the same though) or use tweeters and listen again. This test is like comparing two tweeters and judging how it will sound in a 2 way system because one tweeter has more bass. It makes no sense cause it is completely out of context.
Great Vids. Love the comparison. I was about to purchase the Orions but now I,m thinking Deaf Bounce Arnold. Could you do a vid comparing the two. Also while searching i came across Ground Zero speakers....WOW!!!! Hope you can get some of those to test. Keep the vids and the comparisons going man!! AWESOME setup as well!!
Lets address the elephant in the room. Beyma cost more because import taxes from spain into the US are insane while import taxes from south america (brazil) are quite not. Go to spain and see what they cost over there retail. 1/2 the price of what they cost in the U.S.
Beyma will take more power at lower frequency the prv sounds louderbecause it plays higher frequency but will have distortion at higher volume I will go beyma and add high frequency driver
U had me confused how the speakers not in the right places...the ones that's turning around are on the wrong side🤷🏿♂️🤷🏿♂️.. I thought the beyma was the prv and the prv was a beyma
This is not a good comparison. The Beyma model goes up to 9khz and PRV goes to 13khz. Ofcourse the PRV will sound "louder" because of the high frecuency range, but Beyma is a more dedicated quality midbass midrange driver. Beyma all the way
yep it`s hard to choose from both but I like orions natural sound And price but Prv also really good speaker I`m talking about neos now time to chose for 1 PVR price you can get orion with tweeters and Orion will sound better for sure )
You are mistaking volume with quality, which shows you don't know much about music. Remember, you are testing a midbass speaker, not a full-range one. You even confuse midrange with midbass - which are two different worlds.
It would be very helpful to know the rms you feeding these speakers or at least voltage setting, even adding a cheap multi meter would show. thanks for the reviews and all your doing. Also check out rockville Rm64pro, nice speaker for the price.
Beyma durability is incomparable, i love prv but prv is for a normal guys who dont wanna buy different functionality speakers, however they tend to fail more as the speaker at high volume doesnt always send out clarity where the beyma sounds the same but you do need to add twitters and compression horns and base speakers but you ll have a beast sound quality
I would like to see something set up with DSP/filters/cross overs where you can bump select frequencies and see how they handle. with either set up being a single voicecoil setup people are going to be adding other speakers to fill out the ranges. I like the PRV for a single speaker solution but there are coax speakers in the same price ranges that would do more so wont find a niche there. I would like to hear clean songs (not just frequency tones that vibrate brvrvrvrvrvr) but filtered for different ranges.
I'm running Alpine Type r tweeter and mid bass on all doors of my car. I'm running on a Alpine PDX-V9 amp with a JL Audio 12" W6v3... I think I'm switching my speakers to PRV. Just ordered PRV bullet tweeters next is midbass
Ok i have now prv but i just to have beyma the difference to me is the beyma when u go put volume up up they don’t distortion and the fidelity quality is insane but u write for the price PRV IS DOING A GOOD JOB WRITE NOW I RUNNING 4 6.5 2 drivers and two tweeters and is GREAT AND NOT Expensive for less the have price of beyma im sounding just write
Also if you could match up with how the speakers are playing on the table vs the background that would help confusion. They were flip flopped. Either way i still come back for reviews
Hey Mike,I have Mtx tx450c installed on my doors,but after 40 volume on my Pioneer mvh-s410bt the sound is distorted.You think with an amplifier will go better on not?
Me personally i think the prv is the better buy but thats only beause of that price difference but the beyma plays better the cut from those high frequencies is what u need to get the perfect set up but then agin if your good at setting music frequencies the prv will cover more it just depends on what your looking for u should try comando audio the 6 ″ 6NDFX60 from the dominican republic vs 18 sound 6ND410 from italy
I’ve been PRV till I die for a long time. But I have to admit (and I have these prv’s in the front of my Harley) the beyma is cleaner. I just pulled all 4 of my orIginal PRV 6x9s (the php midrange) and replaced them with the MR Bullet 6x9s. I can’t decide which I prefer. The new Bullet line has an Impressive bass punch that the mid 6x9 didn’t have, but they killed the mid range sound too much. You can see on the spec sheet for them, and when hooked up you can hear it. Don’t get me wrong, the sound range they were able to accomplish with the bullet line is nice. But they are very hard to tune. Even with a dsp, Everyday I’m tweaking the 15 band differences. And now with all these mid ranges with horns in the center popping up, I may be pulling everything and starting all over.
So you have the speakers switched according to your floating pics. PRV is on our left Beyma is on our right But your floating pics show PRV on our right Bema on our left.
You have the speaker icon on the wrong location if you didn’t noticed! Where you have the prv speaker you have beyma speaker floating on top.. and vice versa
@@casemods dude I'm talking in reference to that setup. I personally don't run pro audio drivers except on my motorcycles. In my car I run hybrid audio, of 3 ms275, and JBL GTI 15" sub sealed. I never owned skar, audiopipe, sundown or any of these spl brands. So um my life is good 😂
The prv are a copy of the beyma!!! Beyma for the win... when you have been listening to speakers for years its nit always about loud speakers but clear sound that won't hurt your hearing!! And thats the diffrence!! The speakers are not tweeters!!!
I live in Valencia, a city in Spain where Beyma speakers are manufactured. I have been installing Beyma in all my cars for 25 years. And they have always been considered one of the best brands in the world. Congratulations on your video.
You probably didn't even hear different brands like timpano prv ct sounds skar
@@TalgatsKingsmove Beyma = Quality
Qué ise usté?!
@@TalgatsKingsmoveYOU probably never heard Beyma
😂😂😂😂 china speakers🤣🤣🤣@@TalgatsKingsmove
You're doing the community a great service. Most channels buy one speaker and say it's the best based on some bias or lack of comparison, you go the extra mile to compare them.
Just got the Beyma 6GM/Nd after watching these videos. The vocals and surprisingly the midbass sound excellent, controlled and real loud at high volume crossed between 80 hz -18db and 2.5khz -18db. Running on 400rms each in fully deadened doors. They'll even play down to 50 hz nicely with lower volume.
Add a dsp if you're going to run your midrange not midbass speakers at 50hz they can handle it but a dsp gives you full control and you can push these harder with steeper slopes on your crossover's
Prv's go to 13kHz...rather have the voices and treble than mid bass.
@@casemods My 6Gm/Nd's rated freq response is 90-12000 hz but not many people are going to high pass their midrange that high for any decent sq. The Prv is still very good but too peaky on the higher frequencies for me after hearing it in person
I went with Beyma. Very pleased with my purchase.
thanks for the vids mike....
my moneys still on the beymas....
for longer lifespan.....
and my specific application
PRV sounds more like a midrange where the Beymas sounds like a really good mid-bass driver.
Listening on good Audio Technica headphones through a HiFi Quad Dac...to my ears the Beyma embarrassed the PRV. Smoother, more detailed, stronger midbass, and full sounding. The PRV, while not bad, just seemed harsh to me. Great for being heard over a few thousand watts of subwoofers, but on the sound quality side, didn't do much for my ears. Between the two I'd go Beyma all day. Paired with a nice set of tweeters, I'm sure they'd be much more pleasing, musically.
I realize listening to speakers on UA-cam isn't ideal, but still, much can be heard and learned.
Keep up the cool vids!
Much enjoyed!
BEYMA ALL THE WAY! Greatings from the Caribbean.
Love the reviews! Still waiting to hear a comparison with the Crescendo Mid-range models. Congrats on you're growing channel. Its nice to see mostly positive comments for a change. Keep up the good work.
Bro the new setup is looking sick 😍😍 no we talking, love how you growing this channel 😎💪
Orions1600 vs orions 1800
is what I'm waiting for.. Then winner vs prv 😊
i have Orion HCCA 1800 watts 450 RMS is sound Loud and Clear
I'm have one pair of beyma and one pair of PRV i'm Like more the clear sound of PRV.
It looks like the speakers displayed above are not paired with the way they are in the box I was almost confused
THANK YOU !!
OMG i thought i was going crazy
Great review, I’ve never heard of beyma and so far they are my new favourite. Being in Australia we don’t get a lot of the brands you do and not many companies on amazon will ship to Australia. Keep up to good work mate.
Alot of people havent , when i was a kid everyone used beyma until E.V And prv kinda took over
Get a skybox from your local freight forwarders in Australia, that way you could ship to a city/port in the US and then to Australia. You pay more but you could buy anything online from Amazon, eBay etc……
You never heard of beyma because they are a pro-audio speaker not made for cars. Putting them in a car is just a step up as you are using the best speaker in the world for your car. PRV are built for cars and will never enter the ProAudio space for that reason.
I love my beymas there expensive but worth every penny of them good quality and clear sound
I Ben a bass head for many many years and all my life I Ben searching for a hood mids holy moly that beyma speaker is no joke all day prv is ok but bayma is very very crisp loud
Guys we are failing to understand. I am a audio engineer and when we say midrange we talking about midrange and that means no highs over 6k and no lows lower then 1k. Baymas are doing the midrange right. The prv are to bright over 6k. The midrange vocal voice is not as sharp as bayma. Prv way to damn bright I don’t want highs and lows from midrange. All saying bayma will forever do the midrange correct.
6mr500 is great from 300-12k. Cross them at 8-10k if you're worried about it. I love the treble they put out.
Hi I have two suggestions (1) could you use a bandpass crossover to even out the playing Ground between the speakers because most people are going to use Tweeters with the speakers and (2) could you find a way to give the 8 ohms speaker's the same power versus 4 ohms speaker's that way it will be a fair comparison thanks amd I appreciate your efforts for the experimentation
What amp would you recommend for running 4 of the Prv’s ?? Mentioned above. I currently came across 4 for a steal couldn’t pass them up.
Both speakers are 4 Ohms.
Like he was saying these are on different spectrums for your midrange your beyma will play lower frequencies and your PRV will play higher frequencies they're both incredible speakers but you need to figure out what your going to need midrange wise neither 1 of there are midbass and depending on your application is it a car or a powersports vehicle since this is pro audio it doesn't need power to play loud don't get wrapped up in wattage
Had 4 of these prv on a 4,000 2 channel amp and they sound it amazing. Now have them on a taramps 2000x4 my other amp was way to big. Anyways they sure can take alot of power
xXYoguiPRXx how is the sound now with the taramps amp? I have 4 of them with a 2 channel amp but the amp is too big.
@@dionimendoza6768 to tell u the truth. With the taramps sound way better than before. Got each of them per channel 500 watts no distortion and louder
So you liking that amp? That’s exactly what I was gonna upgrade into my Harley.
Can you do a Ground Zero Speakers vs Deaf Bonce? 🙌
I think people are confused because in the background the speakers spinning are opposite orientation compared to the way they are on the table, but clearly the prv's are better
The beymas are more crisp
The left speaker has more range. At first I thought it was beyma but I realized the pics rotating in the back are on wrong side.
Dual Legos!!!!!!! I cant handle the sound quality!!!! Love these reviews!!!!
Curious to see Orion vs Orion!
Mikie Peters that’s dumb because one Orion will always be better than the other Orion
@@kevintillack1396 no shit
Love the new speaker switch setup. Quick change over does give a better comparison.
This is an interesting review. I can see why the Beymas are more expensive. They both have their own strengths. You just have to pick what is the best for you. The beymas play lower, have a flatter response while the PRVs can give you that extra high frequencies, start tapering off at like 100 and something hz so your choice is based on preference. Keep this videos going! We support you
Shemar William nice name
the picture's was on the wrong side so it's the prv u heard and thought it was the byema
6mr500 is the best. Cross at 300+ they take 350w all day...dont even need a tweeter. They go to 13kHz.
@@CompactAudiodesigns exactly. The Beymas has a higher frequency response
@@casemods Beyma?
Thats a weird comparisson. One midwoofer can be able to reach 7 khz and the other 5khz. If you add tweeters and x-over at 3khz then it might be that the woofer that "only" reaches 5 khz linearly sounds better until 3khz than the one reaching 7khz sounds untill 3 khz. So you have to test them both low pass filtered at the same frequency if you want a realistic scenario. How high a midwoofer can reach is not enough to predict its sound quality. Aluminum membranes many times break up at 5-6 khz and yet some of the best 2 way monitors have these aluminum drivers cause they sound superb all up until 4khz.
So either lowpass filter the woofers at 3-4 khz (both at the same though) or use tweeters and listen again.
This test is like comparing two tweeters and judging how it will sound in a 2 way system because one tweeter has more bass. It makes no sense
cause it is completely out of context.
Thank you for putting that into perspective... I didn't think about that
@@jahn-pierrezietsman2293 i had time when i wrote it so i did it for us :-) cheers
Great Vids. Love the comparison. I was about to purchase the Orions but now I,m thinking Deaf Bounce Arnold. Could you do a vid comparing the two. Also while searching i came across Ground Zero speakers....WOW!!!! Hope you can get some of those to test.
Keep the vids and the comparisons going man!! AWESOME setup as well!!
Lets address the elephant in the room. Beyma cost more because import taxes from spain into the US are insane while import taxes from south america (brazil) are quite not. Go to spain and see what they cost over there retail. 1/2 the price of what they cost in the U.S.
PRV almost sound semi-fullrange!! 👍👍
I'm confused on which speaker is which. I see the icon spinning but him talking pointing has me confused
He had them backwards left Is prv right is beyma
Beyma will take more power at lower frequency the prv sounds louderbecause it plays higher frequency but will have distortion at higher volume I will go beyma and add high frequency driver
is they prv audio - better then the orion midrange?
For the price choice... prv... no regret.. more rms ... for the tuning u can always add EQ equipments..
The PRV's on the left. Pictures are wrong. SMH
U had me confused how the speakers not in the right places...the ones that's turning around are on the wrong side🤷🏿♂️🤷🏿♂️.. I thought the beyma was the prv and the prv was a beyma
This is not a good comparison. The Beyma model goes up to 9khz and PRV goes to 13khz. Ofcourse the PRV will sound "louder" because of the high frecuency range, but Beyma is a more dedicated quality midbass midrange driver. Beyma all the way
Both are amazing both in my opinion beyma the quality was crazy impressed.
Just subscribed keep it up
Welcome to real life )
Beyma is 90hz to 9khz mid bass Prv is 105hz to 12.5khz mid range.
both can play both rolls. there not that far apart.
Prv is 300hz-13kHz. Nobody should cross them higher than 300 if they want the true power out of them.
Hello there Mike, love the channel! I am in the market for some neo 6.1/2 looking at your reviews and stuck between the prv or orions in NEOS
yep it`s hard to choose from both but I like orions natural sound And price but Prv also really good speaker I`m talking about neos
now time to chose for 1 PVR price you can get orion with tweeters and Orion will sound better for sure )
@@LIFEINSPEED thank you for the fast response! Here is 5$ keep up the work
Appreciate this so much
I like the prv in this test!
You are mistaking volume with quality, which shows you don't know much about music. Remember, you are testing a midbass speaker, not a full-range one. You even confuse midrange with midbass - which are two different worlds.
PRV all dayy. Im liking that new setup Mike
What happen with the Rockford speaker did they play really good or what?????
What amp would you recommend for running 4 of the Prv’s ??
Same what amp for the 6mr500cf prv
D4S JP234
Can you show us what type of crossover you are using?
It would be very helpful to know the rms you feeding these speakers or at least voltage setting, even adding a cheap multi meter would show. thanks for the reviews and all your doing. Also check out rockville Rm64pro, nice speaker for the price.
Why not use models that take the same power?
Beyma durability is incomparable, i love prv but prv is for a normal guys who dont wanna buy different functionality speakers, however they tend to fail more as the speaker at high volume doesnt always send out clarity where the beyma sounds the same but you do need to add twitters and compression horns and base speakers but you ll have a beast sound quality
Nice video mike!
Is there a difference is the 8s neo vs carbon fiber
What’s a good amp to use on 6MR500cf-NDY ? I have 4
D4S JP234
Def like the new setup
What about the Beyma Mi100 vs the PRV??? 250 AES fro both
What application are you using to play your music from on your phone please.. Im looking for a high quality music player for my phone...Thanks..!
I would like to see something set up with DSP/filters/cross overs where you can bump select frequencies and see how they handle. with either set up being a single voicecoil setup people are going to be adding other speakers to fill out the ranges. I like the PRV for a single speaker solution but there are coax speakers in the same price ranges that would do more so wont find a niche there. I would like to hear clean songs (not just frequency tones that vibrate brvrvrvrvrvr) but filtered for different ranges.
True, a dsp ser up would be better when using these speakers
I'm running Alpine Type r tweeter and mid bass on all doors of my car. I'm running on a Alpine PDX-V9 amp with a JL Audio 12" W6v3... I think I'm switching my speakers to PRV. Just ordered PRV bullet tweeters next is midbass
Trow in some close ups of the speakers playing and some of the build quality.
Right now I’m between AP-M61AL(not neo) and GPRO-M0665(neo) I want the loudest and clearest price wise I’m leaning to the gpros
with the prv you dont need a loud tweetter.
Which midrange / mid bass speaker is better between PRV or Ground Zero
Prv
Can you do a concrete audio neo vs deaf bounce neo?
CA have a bright sound...I like to see them against Rouge
From tnt did u do a test with the 18sound 6ND410
What is the best PRV 6.5 Model voice Speaker for my door panels / and also What's the best 6.5 BEYMA voice Speaker For my door panels
watch the best PRV model 6.5 Voice speaker And also what's the best model 6.5 beyma voice speakers
How loud can it go
Ok i have now prv but i just to have beyma the difference to me is the beyma when u go put volume up up they don’t distortion and the fidelity quality is insane but u write for the price PRV IS DOING A GOOD JOB WRITE NOW I RUNNING 4 6.5 2 drivers and two tweeters and is GREAT AND NOT Expensive for less the have price of beyma im sounding just write
is the prv on the right or left dammit
bro did u try 18sound 6nd410 ?
If the prv are da neo to run 4of em what's ur suggestions for amp
Good Amp lol
if you have any amp with 150w+ RMS
@@LIFEINSPEED bro they need at least 300 rms per speaker to come alive.
D4S JP234
alpine type r 6.5 please??
I have type r in my truck and I'm thinking of switching out to the PRVs
Also if you could match up with how the speakers are playing on the table vs the background that would help confusion. They were flip flopped. Either way i still come back for reviews
How can I tune 4 PRV Audio 6MR500NDY4 6.5 in. 250W 96dB Mid Range 4 Ohm with the prv DSP digital?
Beyma absolutely has more details and warmer and sounds cleaner!
It should they cost a fortune!
@@tammyforbes2101 la calidad cuesta
Lol u just made a mistake the picture's was on the wrong side so it's the prv u heard and say it sounding better
To me the PRV sounds better.
Hey Mike,I have Mtx tx450c installed on my doors,but after 40 volume on my Pioneer mvh-s410bt the sound is distorted.You think with an amplifier will go better on not?
Me personally i think the prv is the better buy but thats only beause of that price difference but the beyma plays better the cut from those high frequencies is what u need to get the perfect set up but then agin if your good at setting music frequencies the prv will cover more it just depends on what your looking for u should try comando audio the 6 ″ 6NDFX60 from the dominican republic vs 18 sound 6ND410 from italy
If a mid-range putting to much high tone it's not doing it job.
Good morning can u do prv 6mr500 vs mmats please
I’ve been PRV till I die for a long time. But I have to admit (and I have these prv’s in the front of my Harley) the beyma is cleaner. I just pulled all 4 of my orIginal PRV 6x9s (the php midrange) and replaced them with the MR Bullet 6x9s. I can’t decide which I prefer. The new Bullet line has an Impressive bass punch that the mid 6x9 didn’t have, but they killed the mid range sound too much. You can see on the spec sheet for them, and when hooked up you can hear it. Don’t get me wrong, the sound range they were able to accomplish with the bullet line is nice. But they are very hard to tune. Even with a dsp, Everyday I’m tweaking the 15 band differences. And now with all these mid ranges with horns in the center popping up, I may be pulling everything and starting all over.
So you have the speakers switched according to your floating pics.
PRV is on our left
Beyma is on our right
But your floating pics show
PRV on our right
Bema on our left.
I got the beyma 6mi100s and the 6g40nds. The clarity is in the video prv is higher more distorted though.
The PRVs were louder at lower volume but the Beymas were louder at higher volume
i would like to see taramps 6in fr-400s vs prv 6mr400-bullet
The price for PRV setup is $2000 a door. 5 6.5s 2 10"s and 2 4in tweeters one PRV SQ6000.1 and 1200.1 per door.
Now you confuse ass man i was thinking about get some Oriones and that prv gust amazing
You have the speaker icon on the wrong location if you didn’t noticed! Where you have the prv speaker you have beyma speaker floating on top.. and vice versa
Yep I messed it up )
@@LIFEINSPEED sorry didn’t know plp already mentioned it.. I didn’t go down to far to see that on comments till now lol.. great videos tho 💪🏻
5 minutes in, PRV for the win!
sorry but the prv sound cheaper 😅 you need to listen to real hi-fi speakers and you’ll know what you talk about
3:50 sounds like a piece of an exquisite piece of china..... i rather using beyma , real crossovers and real tweeters
U should review the rockville pro 6.5s
I did )
@@LIFEINSPEED don't see a video
He did it won the worst speaker ever title
Really lol
Not the rx series the pro 6.5s
Test those prv vs orion 1600w
Looks like u got them crossed bra
nice to hear the div but these are midbass speakers not full range I dont need to much high freq from my speaker
Those Beymas with a nice compression horn or even a pair of Skar tweeters and you all set with a really good x-over
Skar? Get your life together man.
@@casemods dude I'm talking in reference to that setup. I personally don't run pro audio drivers except on my motorcycles. In my car I run hybrid audio, of 3 ms275, and JBL GTI 15" sub sealed. I never owned skar, audiopipe, sundown or any of these spl brands. So um my life is good 😂
Saludos desde MEXICO. podría ponerle subtítulos a sus vídeos. Muchas gracias
I suggest that the test should be done at 3 different ways, low frequency, mid frequency and high frequency.
The prv are a copy of the beyma!!! Beyma for the win... when you have been listening to speakers for years its nit always about loud speakers but clear sound that won't hurt your hearing!! And thats the diffrence!! The speakers are not tweeters!!!
i hear more highs than Mids.
Test Orion 6.5 HCCA 654 NHP 1800 watts 450 RMS Please VS Beyma
Prv louder but not clearer
Prv way cleaner