I knew there was something up with that swing arm I knew it wasn't no GP swing arm this kid doesn't know half of the stuff his bike has sounds like he bought it with most of the s*** on it except for the stupid nuts and bolts and gas cap and block off plates for the mirrors and bar ends that's all corny stuff
matt graves just found this video today lol but that’s exactly what I was thinking. Those type of swing arms cost thousands of dollars from what I’ve found
hey AK, i just started a channel, MaxTheTach, and i have the exact same bike. the only difference is i just got into an accident, so im rebuilding it, should be up and running in a couple weeks. although im so desperate to ride im thinking of riding with fucked up fairings. anyways, i just wanted to say i love ur bike and ive watched alot of your videos. ride safe bruh! ill upload a video of my bike (fucked up and then rebuilt) for you.
Did you have to modify the lower belly pan rear area to fit the Coffman shorty exhaust? There are no shorty exhaust for the 04-06 r1 model that I can find
Jacob Hendrickson same dimensions as stock, but my stock ones needed replacing and found someone selling the upgraded ones from his race bike on EBay. Not sure what the difference was, its been forever since I had the bike, also the dent in the frame was from the previous over knocking it over in his garage onto a pile of bricks he had in the corner.
All around very nice and ckean bike but i dont understand why To remove dual exhaust because after that the tail looks like shit.. I have an 2004 R1 with LeoVince dual exhaust and it looks much better than that
Wow been waiting a while to hear your reply. Why not tell the radiator info. Is it bigger better or what?? I replaced my stock rad with a aftermarket unit that’s the same size with slightly larger capacity due to more primary cooling channels. Then added a second triangular lower radiator as well. This way I was able to keep the fans and all factory connections.
All these expensive mods and look at your rear brake fluid reservoir that shit looks like oil, should look like water, and that exhaust is a dan moto carbon gp for the 04-08 r1 you have to switch from dual yourself with a link pipe, judging from his lack of knowledge and maintenance someone built this bike for him or he bought it like this but... still pretty dope I just bought a 04 with 4400 miles same doorway without the gold.
Definitely I was thinking the same thing. Because you don't know the name of his pipe he don't know where his swing arm came from cuz that's not a real GP swing arm I'm even even stupid things like the stupid shock spring he doesn't know anything about that he doesn't know the name of his chain just that it's gold this kid is like fascinating on gold corny little gas cap cover and pro bolt kit and carbon triple clamp nut I'm not impressed at all I had titanium nuts and bolts throughout my whole bike every single bolt machined by a metallurgist. I laughed when he pointed out the stock forks and said he had gold forks and when he pointed out to stock staring damper you could tell this kid really don't know much about bikes
I love our ones but to be honest you got a bunch of nothing on there. I'm curious of the swing arm is it off a GP bike? And if so what type or was it fabricated by a machinist. You definitely should know where it came from or who made it or what brand it is the pipe I'm curious she said a GP pipe is it off a GP bike? What is the name of the pipe the maker. The only thing that I would list if I was you that is a real any real significance is the swing arm possibly the pipe I guess it's just a slip-on I wouldn't mention the forks like you did cuz they're just stock forks it's not like the tubes are titanium nitride coated it's just a sanctions or anodized which means nothing really your full controls are nice though the radiator is interesting I like that power commander of course is good you got the standard steel braided lines that didn't impress me the shock spring doesn't impress me at all like if you had an own shock or Owen's front fork or Owen steering damper aftermarket rims and brakes aftermarket triple clamps all that gold stuff is nothing it's meaningless just cosmetics along with the carbon fiber inserts but I do like carbon fiber body work the levers are no big deal the grips are nothing I kind of knew when I saw the beginning of this video that you'd have a bunch of nothing like when I saw that list I knew it was going to be like I got mirrors and blinkers and windscreen and a mud guards you know I kind of laughed every time you mentioned some freaking gold nut or bolt like it's a big deal okay so you have some carbon fiber body work inserts and you have a bunch of gold bits here and there best thing you got is probably that swing arm depending on its origin you don't even know the name of your chain you know I got I'm doing text to speech and I don't feel like going back and correcting the words like ohlins you still got a long way to go you need some rims some brakes aftermarket forks with impress me rear staring damper, rear brake caliper rear brake rotor front brake calipers front brake rotors
Beautiful bike even when its dirty cant even imagine how nice it looks after you clean it
The R1 is such a good looking bike!!!
I love this video! Thank you so much for the post. It makes me excited to add mods and fix the cosmetics of my bikes
Same here just pick up a 06 R1 and watching this video pumps me up to fix it to my liking
cool stuff. I just bought an R1 and i'm was looking for mods and different things I could do to it, your video helped a lot!
Man you gotta keep her even though she's been trouble you can hear the happiness in your voice when you talk about this bike
Bike looks nice man!
bike looks real good man!!! just one question did you have any issues using that side exhaust instead of the under tail?
That's a stock swingarm with a welded plate, was the hot shit mod on R1 forum years ago
+HELLCOMESTOTOWN i was wondering about that, thanks.
I knew there was something up with that swing arm I knew it wasn't no GP swing arm this kid doesn't know half of the stuff his bike has sounds like he bought it with most of the s*** on it except for the stupid nuts and bolts and gas cap and block off plates for the mirrors and bar ends that's all corny stuff
The steering damper comes stock on the bike........that's not a mod xD
Where did you order all of this stuff from? I have an 06 R-1 as well BLACK Raven
Love what u did your r1!
love the gold and carbon fiber nice.
its the R1 Subaru edition! yayy :-p nice bike man!
Do you also have a goldmember as well?
All that money in mods ain't gonna wear in your chicken strips for ya...
nice bike I got the same bike but the raven model..👌👍
Lee Izaak me too ... I love the raven edition
"Zero Gravity" windscreen, on my Red 05.
I can't tell if he's 16, 26 or 46
Really having a hard time deciding on an R1 vs a super naked of some sort
where can I buy that exhaust. Please tell me where. I love it.
thats just a braced oem swingarm, they weld plates into the holes then grind the welds off abd re paint them, nice bike anyhow, what brand bellypan?
matt graves just found this video today lol but that’s exactly what I was thinking. Those type of swing arms cost thousands of dollars from what I’ve found
I agree. I believe that's just a swing arm welding, ground and painted
I have a JMC underslong swingarm with eccentric chain adjustment
What’s the dented frame from??
Nice vid! Kann you tell me more about the swingarm?? Cant find shit about it on the net. Thank you
Nice Bike Men I Just Got A 06 R1. Clean AF Not A Scratch On With 11k On IT
How much was it? Does it run hot??
SWEET bike man good job, how did you mount your plate back there ???? i got TOCE exhaust on my 07R1
hey AK, i just started a channel, MaxTheTach, and i have the exact same bike. the only difference is i just got into an accident, so im rebuilding it, should be up and running in a couple weeks. although im so desperate to ride im thinking of riding with fucked up fairings. anyways, i just wanted to say i love ur bike and ive watched alot of your videos. ride safe bruh! ill upload a video of my bike (fucked up and then rebuilt) for you.
I want carbon so bad, but I don't know about spending 500 bucks for a couple pieces lol, most expensive being the tank cover
Yamaha R6 nice bike I am Bike lover
Are those carbon fibre panels skinned/laminated?
can u send me the link of the gp exhaust or were di u get it thanks
Did you ever get link for the exhaust
Please tell me how to have a gp exhaust !!!!!
I wish i could find this exhaust for my R1!
you're tellin me. i have an 05 r1 and i want a short side exhaust badly.
Derek Stewart check out Coffmans
Did you have to modify the lower belly pan rear area to fit the Coffman shorty exhaust? There are no shorty exhaust for the 04-06 r1 model that I can find
My guy where did you find that exhaust? I have an 06 also and can’t find anything online to do it. Did you cut and weld it together or what my guy?
We’re do u get ur cabon fiber from
where did u get the gold foot pegs
Dude I check in weekly to see a response on the radiator upgrade
Jacob Hendrickson same dimensions as stock, but my stock ones needed replacing and found someone selling the upgraded ones from his race bike on EBay. Not sure what the difference was, its been forever since I had the bike, also the dent in the frame was from the previous over knocking it over in his garage onto a pile of bricks he had in the corner.
Hey, how did you get the gold ring around the tach??
joshblack526 any answer on where he got the gold ring around his tach?
Did you see any gains from the shorty exhaust??
How’d you get a gold gas cap and gold on your tach? Looking to do the same on my black and gold R1.
Did you paint that gas cap? Or was it aftermarket? It looks like the stock cap, but just wondering. If so, did you use a specific paint? Thank you.
How many miles are on the bike? It's beautiful
Part for the exhaust delete??
hi can you please tell where can i by that exhaust system...love it
+Jameslay Dorvilus u have to buy the exhaust for the r6 is what i did and it worked
Tex Hardman from what year r6?
Can you please help me find out the brand of your exhaust in the part number to it?
GOLD!
All around very nice and ckean bike but i dont understand why To remove dual exhaust because after that the tail looks like shit.. I have an 2004 R1 with LeoVince dual exhaust and it looks much better than that
Hi where did u get the swing arm from?
Sick bike
what brand of bar end mirror is it thx
how did you get the gold cluster top?
Is the radiator a upgrade or just a needed replacement?? If it’s better why is it better and where did you get it.
Wow been waiting a while to hear your reply. Why not tell the radiator info. Is it bigger better or what?? I replaced my stock rad with a aftermarket unit that’s the same size with slightly larger capacity due to more primary cooling channels. Then added a second triangular lower radiator as well. This way I was able to keep the fans and all factory connections.
where did you get that muffler?
I want this bike who did you sell it too!!! I’ll pay top dollar
thanks i will do so
+TheAK47s r u still selling in
+Tex Hardman austin.craigslist.org/mcy/5463669339.html
I love goooooollld.
bling bling!
Where can i get that swingarm? Its very nice
Is that a swing arm cover? As in a stick on. Had one in gsxr before
All these expensive mods and look at your rear brake fluid reservoir that shit looks like oil, should look like water, and that exhaust is a dan moto carbon gp for the 04-08 r1 you have to switch from dual yourself with a link pipe, judging from his lack of knowledge and maintenance someone built this bike for him or he bought it like this but... still pretty dope I just bought a 04 with 4400 miles same doorway without the gold.
Who gives a shit!? You don't like it don't comment
Definitely I was thinking the same thing. Because you don't know the name of his pipe he don't know where his swing arm came from cuz that's not a real GP swing arm I'm even even stupid things like the stupid shock spring he doesn't know anything about that he doesn't know the name of his chain just that it's gold this kid is like fascinating on gold corny little gas cap cover and pro bolt kit and carbon triple clamp nut I'm not impressed at all I had titanium nuts and bolts throughout my whole bike every single bolt machined by a metallurgist. I laughed when he pointed out the stock forks and said he had gold forks and when he pointed out to stock staring damper you could tell this kid really don't know much about bikes
You should probably stay behind the camera.
Why get rid of the dual exhaust :(
Yamaha 16
Nice
To your r1*
verry niice
You look like shaggy
Damn this kit is sooooo fucking ugly damn man damn 😂😂😂
So sorry dude. Stop showing you self.
And you know why.....
I love our ones but to be honest you got a bunch of nothing on there. I'm curious of the swing arm is it off a GP bike? And if so what type or was it fabricated by a machinist. You definitely should know where it came from or who made it or what brand it is the pipe I'm curious she said a GP pipe is it off a GP bike? What is the name of the pipe the maker. The only thing that I would list if I was you that is a real any real significance is the swing arm possibly the pipe I guess it's just a slip-on I wouldn't mention the forks like you did cuz they're just stock forks it's not like the tubes are titanium nitride coated it's just a sanctions or anodized which means nothing really your full controls are nice though the radiator is interesting I like that power commander of course is good you got the standard steel braided lines that didn't impress me the shock spring doesn't impress me at all like if you had an own shock or Owen's front fork or Owen steering damper aftermarket rims and brakes aftermarket triple clamps all that gold stuff is nothing it's meaningless just cosmetics along with the carbon fiber inserts but I do like carbon fiber body work the levers are no big deal the grips are nothing I kind of knew when I saw the beginning of this video that you'd have a bunch of nothing like when I saw that list I knew it was going to be like I got mirrors and blinkers and windscreen and a mud guards you know I kind of laughed every time you mentioned some freaking gold nut or bolt like it's a big deal okay so you have some carbon fiber body work inserts and you have a bunch of gold bits here and there best thing you got is probably that swing arm depending on its origin you don't even know the name of your chain you know I got I'm doing text to speech and I don't feel like going back and correcting the words like ohlins you still got a long way to go you need some rims some brakes aftermarket forks with impress me rear staring damper, rear brake caliper rear brake rotor front brake calipers front brake rotors