Super prezentare a acestui utilaj, mai ales performanța după modificările suferite💪. Cred că este identica lui 501 Echo, că seamănă f bine. Fain clip👍. Sănătate maximă să ai Ram🤝
@@poparamiroo singura problemă pe care o are e filtrul de aer. Dacă tai ceva lemne uscate se încarcă cu praf și nu mai trage motorul până îl cureți din nou.
Lovely chainsaw, runs great and looks well built. Shame not many available in our part of the world. Regards Dorin.
Yes, very nice and light chainsaw...
Thanks for watching and comment!
These are a beautiful looking chainsaw and a very sharp chain as well. It certainly cut quicker after your machining.
You could get an Echo, they are pretty much the same, like when Jonsered was still a thing they were slightly better built Huskies.
Super prezentare a acestui utilaj, mai ales performanța după modificările suferite💪. Cred că este identica lui 501 Echo, că seamănă f bine. Fain clip👍. Sănătate maximă să ai Ram🤝
In mare parte e la fel, putin mai usoara...
Numai bine!
@@poparamiro, și mai ușoară decât 501?! Chiar că deja fac japonezii drujbe pt ginecologi.😁😬🥴
Te salut Ram. Eu cu acest model shindaiwa 452s cred că ies la pensie. O am de 18-19 ani și încă e funcțională. 👍👍👍🤝
Cilindrul are cel mai dur plating ce l am vazut pana acum...
Numai bine!
@@poparamiroo singura problemă pe care o are e filtrul de aer. Dacă tai ceva lemne uscate se încarcă cu praf și nu mai trage motorul până îl cureți din nou.
@@poparamiroadică este peste celelalte mărci?
@@iliecirciu1251Da, corect, nu are cea mai buna filtrare, dar se poate moda...
@@cosminstanciu9833Are plusuri si minusuri, ca orice drujba...
Făină rău nipona!
După intervenție s-a transformat într-un veritabil samurai!
P.S. cred ca e o plăcere sa lucrezi cu ea!
Mulțumesc pentru vizionare si comentariu!
I still have 446s, the same, since 2008, great saw
Thanks for watching and comment!
My 452s is over 10 years old. Good saw.
Thanks for watching and comment!
yea
Thank you for a nice video! How many millimeters were removed from cylinder bottom by the lathe? :)
1mm
Thanks for watching!
Rums great, even better after the machining/porting.
Does it have a front tensioner, just at a bit of an angle?
Yes, front angled, not so bad...
Thanks for watching!
Which Echo model does this correspond to?
Really interesting videos!
Thanks for watching!
Don t know the exact Echo model ...
Echo 501 sx@@poparamiro
@@armi_09 501sx is 50cc...
Thanks for watching and comment!
@@poparamiro But it is the same, only little bigger capacity
@@armi_09 Yes, true...
🤝🤝🤝
oo yea bro best
🤝🤝🤝
Hi there from NZ, what part number is that bar, ive been trying to find one for my 452s. Thanks
Hi!
514274-16
.058 .325 66 S6
Theese are the marks on the bar...
Nice chainsaw. I haven't heard a peep about them in Australia.
Foarte mirat la cum se prezinta an sarcina chiar foarte buna ce pret are si cati cai putere
Nu mai stiu cat a fost, cred ca vreo 1500 pe olx...
3cp stoc
Salut Ramiro cat costa un muffler mod ca acesta din clip ?
Salut!
500ron
👍👍👍👍👍👍
🤝🤝🤝
Jaki zamiennik tło cylinder do tego modelu
Good day! What you did with cylinder? Can you explain?
Hi!
It was decked and mild ported
All the best!
@@poparamirowhat exactly ported, exhaust, intake or squish?
Sall ram baiatul acela reconditioneaza cilindre?
Salut!
Nu, a facut decking...
Super clip!Seamana mult cu 543Xp
Apropiate si ca specificatii...
Toate cele bune!
Holzfforma g372xp au probleme carburatoare?
Da
Tengo una 488 y no arranca
🤟🇻🇳🇻🇳shin dai wa😂😂🪓🪓🇺🇸🇺🇸
🤝🤝🤝
Sport SAW )
Thanks for watching!
Japan Technologie
Looks just like an echo
It is an Echo...
Thanks for watching!
Nice saw.... Charles Brisco need to get his hands on one!
For sure!
Thanks for watching and comment!