I RESTORED This Nintendo 64 / Custom painted N64 / N64 restoration

Поділитися
Вставка
  • Опубліковано 5 гру 2022
  • In this video i disassemble an old Nintendo 64, cleaned it and custom painted it.

КОМЕНТАРІ • 69

  • @drakonolus7922
    @drakonolus7922 5 місяців тому +3

    Gorgeous, looks so elegant. Like an a Deluxe version that never existed

  • @maxrichards5925
    @maxrichards5925 9 місяців тому +4

    What an awesome shell design! It’s always really cool to see custom N64’s

  • @cloud_slash6484
    @cloud_slash6484 26 днів тому +1

    Nice. I would personnaly paint the « foot », power and reset in champagne too but great job !

  • @BabyLouie22
    @BabyLouie22 Рік тому +3

    Great choice of colors. The champagne sets off the white perfectly. *Chef kiss*

  • @hawkfeather6802
    @hawkfeather6802 10 місяців тому +5

    Very nice! It looks very sleek and clean in white. And the gold controller ports are great!

  • @alexbedini731
    @alexbedini731 6 місяців тому +1

    Amazing paint, amazing skills amazing results!!!!!!!!!!!!

  • @spamaccount6460
    @spamaccount6460 Рік тому +5

    Really gorgeous. I've seen some really gaudy paint jobs for old consoles, but this one is so good.

  • @TheSuperStylishSmurfs
    @TheSuperStylishSmurfs 11 місяців тому +3

    That looks really nice

  • @zaturdo
    @zaturdo 4 місяці тому +1

    Looks amazing

  • @sdzero
    @sdzero Рік тому +4

    1:39 From what I've researched, every N64 is missing that screw. That's a clean paint job. Very cool.

    • @midnightfix
      @midnightfix  Рік тому

      Hi! You’re right! Thanks for watching!

    • @waynetemplar2183
      @waynetemplar2183 Рік тому +2

      That's the hole for one of the six screws that secures the two halves of the console shell

    • @makkmchammer4247
      @makkmchammer4247 Рік тому

      @@waynetemplar2183 yup!

    • @Boomdiers
      @Boomdiers Рік тому +1

      That screw was one of the slots for the 64DD which was an commercially failure and didn't come go outside of japan

    • @myREALnameISiAM
      @myREALnameISiAM 9 місяців тому

      Ha. I was wondering why mine was missing, too.

  • @_asher
    @_asher 9 місяців тому +2

    Looks great! When doing custom cases like this I always figure why not go ahead and install an HDMI mod since you're already modifying the case
    Could be a cool addition!

    • @midnightfix
      @midnightfix  9 місяців тому +1

      Thanks for the suggestion! sounds good. Thanks for watching!

  • @nikabosmit3884
    @nikabosmit3884 Рік тому +3

    Keep it up, man! Nice video, especially custom paint job part👍Next time try to give buttons different color, or something like that

  • @jiahilmi
    @jiahilmi 8 місяців тому +2

    No fake dirt 👏👏👍👍

  • @RETROOBLIVION
    @RETROOBLIVION Рік тому +4

    Great Job! It looks amazing! I'm going to attempt to do a Resident Evil N64 in about a month. I hope I can pull it off! Good Video!👍👍

  • @Retro-Fez
    @Retro-Fez 11 місяців тому +1

    Looks great in white but personally idve painted the other bits red to match the nintendo logo

  • @zealgaming9123
    @zealgaming9123 11 місяців тому +2

    Pretty cool, if I knew how I would of replaced the power light with LED and made it a different color like yellow or blue

  • @sub_vadaverse
    @sub_vadaverse Рік тому +3

    Nice

  • @areyoumycreator_8915
    @areyoumycreator_8915 9 місяців тому +2

    Keep these videos up, original xbox next

    • @midnightfix
      @midnightfix  8 місяців тому

      Hi, I will! Thanks for watching!

  • @nooneson1
    @nooneson1 Рік тому +2

    It's looks good I'd still be nervous it'll scratch then it's ruined

  • @jessi4383
    @jessi4383 Рік тому +3

    👏🏻👏🏻👏🏻

  • @Cilpsinpbwrooody2
    @Cilpsinpbwrooody2 Рік тому +3

    Liked

  • @tabsntoot
    @tabsntoot 10 місяців тому +1

    always thought the standard graphite grey colour was a bit dowdy also the editions were a bit uninspired ,that’s much better

  • @heywingspan
    @heywingspan Рік тому

    what did you put on the q-tips for the controller ports???

    • @midnightfix
      @midnightfix  11 місяців тому

      hi, to avoid paint getting inside. Thanks for watching!

  • @benroberts2336
    @benroberts2336 9 місяців тому +1

    Hi , what sort of spray gun did you use ?
    Thanks

    • @midnightfix
      @midnightfix  8 місяців тому

      hi! its a gravity spray gun. Thanks for watching!

  • @jeisonlopez6047
    @jeisonlopez6047 Рік тому +2

    😲 wooooooow
    Hasta que alguien arreglar a esa Nintendo 64 y la mejor cambiarle el color negro a una color blanco hermoso parece que esa consola Nintendo 64 color blanca fuese de colección

  • @urmumischiling0nme450
    @urmumischiling0nme450 Рік тому +7

    I gotta be honest you took out somethings a little too dramatically like take it out it's simple it's not stuck

    • @midnightfix
      @midnightfix  Рік тому +3

      You’re completely right! Im such a drama queen. Thanks for watching!

  • @robinson32993
    @robinson32993 11 місяців тому +2

    I usually don’t like custom paint jobs for consoles, but this one is really good. Only thing in my opinion, the controller ports would of looked better black rather than gold. It would of gone nicer with the white.

    • @midnightfix
      @midnightfix  11 місяців тому

      Hi, good suggestion! Thanks for watching!

    • @myREALnameISiAM
      @myREALnameISiAM 9 місяців тому

      I, too, prefer the classic black and white look but I don't know if it would look nice on this console. Maybe silver or dark grey.

  • @Rockadin
    @Rockadin 10 місяців тому

    how is power button now?

  • @jpryan9494
    @jpryan9494 Рік тому +1

    What kind of paint did you use? Also did you paint the sides of the buttons?

    • @midnightfix
      @midnightfix  Рік тому +1

      Hi! I painted it with car paint, yes i did paint the sides. Thanks for watching!

  • @mauriciogaytangarcia5543
    @mauriciogaytangarcia5543 3 місяці тому

    falto la etiqueta que esta por debajo de la consola, un detalle que lo haria verse original.

  • @ferdinandrittervonmanstein2414
    @ferdinandrittervonmanstein2414 8 місяців тому

    its really necesary the thermal paste ?

    • @midnightfix
      @midnightfix  8 місяців тому

      hi, not at all, N64's usually runs cool most of the time but I did add it anyway. Thanks for watching!

  • @104turbo
    @104turbo 11 місяців тому +2

    Thats a really nice white you picked. Any chance to get the paint code for it?

  • @jorgevasquez9245
    @jorgevasquez9245 Рік тому +1

    Es nesesario la pasta termica?

    • @midnightfix
      @midnightfix  Рік тому

      hola! es para nada necesaria, solo la puse porque estoy acostumbrado a hacerlo. Gracias por ver el video!

  • @50k50000000000000000
    @50k50000000000000000 Рік тому +1

    Do you do commission? And could you do a Xbox series X

    • @midnightfix
      @midnightfix  Рік тому

      Hi! I do not, im sorry. I will try to do a Xbox next time.

  • @leonardpayne8795
    @leonardpayne8795 Рік тому +2

    You forgot a Official N64 Expansion Pak.

    • @midnightfix
      @midnightfix  Рік тому +1

      Hi! it is hard to see the details in the video but I did use an Official Expansion Pak. Thanks for watching!

    • @ryanfuller5
      @ryanfuller5 10 місяців тому +2

      That red one is the official expansion pack

  • @billgates3699
    @billgates3699 10 місяців тому

    This mod looks like reheated McDonald’s fries taste.

    • @midnightfix
      @midnightfix  10 місяців тому

      I know right. Thanks for watching!

  • @filevans
    @filevans 11 місяців тому +1

    Another n64 ruined by a ridiculous ugly paint job

    • @midnightfix
      @midnightfix  11 місяців тому

      hi, Thanks for watching!

  • @libcrypt98
    @libcrypt98 11 місяців тому

    Paint...