Wes: I got about 12 hours into this job, it's just difficult to find that much time to work on a single project... Me: I tell you what's even more difficult to find.... A machine shop in the middle of a corn field and a machinist who is willing to work on a corn auger for 12 hours... Good professional factory repair Wes, awesome video and content.
It always amazes me at how many man hours you put into these project to make them workable. Its even more amazing when I have to assume you give an equal time to editing these videos and give us content every week aside from your family life. BTW, I'm pretty sure I saw Max's picture on the ASPCA mail I got last week. Well done and thanks Wes!
Thanks Wes. I worked on grain bins, augers, belt elevators, etc. about 25 years ago as a summer/weekend job. I can attest that rotting grain is enough to gag a maggot, every single piece is always rusted, oblong, wallowed, broken, and mostly designed to never come off, and that no auger has ever been repaired willingly and without a blood sacrifice. Thanks for the memories. Working that job made me drop pre-med to go into engineering. I mostly hate people, so I think the world is a better place because of that.
Wes says he used all the tools. I says Wes used all the skills as well. Superb job - especially the flawless weld. (and Kudos to the Oliver tractor, stored outdoors in freezing weather, actually starting!)
Yet again Wes, you have proved how capable an all round engineer you are and how wide your understanding of the different systems you work on is. More power to you and well done on proving you can edit and produce videos to an equally high standard. Thank you so much for all your time and efforts.
GREAT WORK!!! I have no idea what you charge for a job like that one but I'm sure it would have cost that farmer a lot more if he had to buy a new one. Your talent far exceeds that of a garage mechanic. I am throughly impressed. .
@JobyFluorine-ru4bd $50 an hour, they have got to be joking. By the time Wes tokes out all his costings, he would be down $50 an hour. More like $180 an hour. As an old mechanic once told me, it's not the hourly rate, it's what gets done in that hour.
He might do it for $50/hour. Because the owner lent him a tractor for a couple of days last year. Or because the guy's neighbors grandfather sold him that lathe at a massive discount when he retired 15 years ago. Idk, had a local guy give me a massive discount on some work recently so I'm inspired to spread the spirit of generosity around lol. (Not that I want anyone to undervalue their work)
I loved Max's ASPCA stance! I could here Sara's "Arms of an Angel" as Max took his majestic pose! I think the rotten corn smell can be relatable to those moonshiners back in the hills. You gave those not in a farming community a taste of the sort of battles farmers face on a regular basis. Great Video Wes.
Great tailstock setup! I bet the pucker factor was elevated when you were working on getting that aligned. Thanks for bringing back some machining videos.
Well Wes it looks like you have found a direction to go in for your videos. Good thing you started out as a machinist and were able to refurbish the old equipment . Seems to be paying off. 👍. Artie
2 things Wes: 1. very well edited, as usual, I never get itchy to fast fwd or abandon midstream; 2. curious for my own knowledge if antisieze in the couplings would make future removals easier. We get lot of "weather" in Indiana and I'm always looking to make life better for future me. Maybe a third thing, continuing to support your request of feedback in an earlier video, I am a fan of the eclectic content on your channel, most of us live a normal life and we have many things to repair, or interests to feed. 11,000 views in one hour is a pretty good tell as well that your formula hits with a lot of other people too.
This is actually a good point. I never noticed, but yeah, with other channels I tend to skip or 2x through some slower bits, with WWW videos I've never wanted too. Heck, sometimes I rewind.
When i was growing up on a farm, I never in a million years, would have watched a video about an auger repair, but here I am. Funny how you circle back to your roots. Thank you, sir, for all your hard work making these awesome videos for us. Absolutely one of my favorite channels!
Wes, I'd like to pass on a compliment that my late wife paid me on day. You'll figure it out, you always do. That simple statement almost brought me to tears after all the years of silence from her on the various jobs one will do around the house and garage. Keep on keeping on, Wes. You got this!!
I came to the conclusion when I was a much younger man that machines were easier for me to understand than human beings. I also readily admit it is as much my issue as it is an issue with others. I just prefer to avoid people when possible.
Yay! A Wes video! I was beginning to get a little worried about you. I'm completely impressed, as usual. Great job. You asked what your viewers enjoy? This. This is what I enjoy. The creative brain of Wes wins again.
That was a great video. I really enjoyed watching you take a worn out grain auger and overcome whatever obstacles came along to make it new again to serve for many more years. It doesn't matter what you work on, its just amazing to watch you pull something apart that was hopeless and use many different tools and techniques to bring it back to life.
Wes, this is one of your best yet. Anybody can do brakes and fix rusted brake lines. But you showed us your talent and know-how on this one. I loved seeing you use all that big equipment we've all seen sitting around in the background. This was by far, one of your most interesting videos.
Very cool, I grew up around farms and my grand parents owned a grain elevator. Fixing augers that the grain dust ate up was a constant like you said. Cleaning out the rotted grain in the pit around the grain dump basin was always one of the most gag inducing tasks we had, so I can empathize on the rotted corn smell. Have a great day sir, may you and yours be safe.
Especially if it's mixed with rust for some reason. I grew up in the first small farm town north of Flint Michigan and sometimes help friends who lived on farmstead. That became one thing I avoided at all costs after the first time no matter how much they'd beg me to help. That and mucking livestock structures.
Wes, you decided on the CEE repair to the drive shaft and it looks great! Most people don't appreciate how destructive spoiled grain and water are to farm equipment (rotting soybeans smell worse). You have a good lathe setup, and glad to see someone in NW Illinois still knows how to use one! -17F this morning at my place, so I agree that Winter has self corrected.
I know at least half a dozen farmers who'd love a shop like yours nearby, those machines (and spare parts for them) are so ridiculously expensive that even a $2000 repair is a real bargain.
Hello Wes, I’m not a professional comments writer; in fact, I don’t speak English very often, as I’m from a little post soviet country, but I like to watch your videos, because they’re about finding the solution for unsolvable (sometimes) problems. I just wanted to thank you for the great content you make, and wish you and your family the best
Your English is excellent. Your comment was at a higher reading level than most native English speaker. Don't be afraid to comment anytime in English..
cutting edge engineering would be impressed with that machining i bet. way more impressive than what i could ever do. I always enjoy your thinking out of the box on how to fix things.
Wes, An interesting example of diligent work and repair of the old grain elevator . Your mechanical and machinist ability is amazing. You definitely not afraid of going the extra mile and investigate and figure out and resolve issues. The farmers in your rural community are very lucky to have You and Your Dad in the area.A Fan from New Brunswick CANADA
As I begin to push 70 I revel in the times where watching someone work takes me back to my boyhood days back in NW Indiana. My dad was a machinist. The neighbor down the street was a machinist-fabricator. Watching either of them create working mechanical equipment from scratch was better than a magic show in my book. Thanks for taking me back to some very wonderful memories. I spent a few days in industrial maintenance myself, and still watch in awe as things go back together far better than they were assembled in their beginning. Good on ya, man!
I imagine Mayrath has a huge number of fixtures specific to the augers, and procedures, like removing the axle A-frame so as to fix the fixed bits better. But, I'll wager they would not shave more than 10 man-minutes' labor off the job. So, good job @Wes And, as always, a great video.
Great job. My dad had an auger similar to that when I was a kid and that bushing would only make it a couple of years. We finally welded some angle on to the funnel box and put a self aligning pillow block bearing on it.
Ditto. I used to sell bearings and gear boxes. I asked one time why farm equipment had such cheap gearings. The trainer told me, farmers are cheap and they use their equipment about 3 weeks each year. Bearing upgrades are worth it for sure.
Hi Wes, In a previous video you asked what sort of videos your viewers like to see. For me, it's this. Any schlub can diagnose and replace car parts. It's far more interesting to watch you solve problems that require more than that, and it's very interesting seeing equipment that I don't see every day, like the ag and construction stuff. It's good stuff and is what sets you apart from the other channels in this space,
The feeling one gets when you have the equipment and know how to make your own Shafts, sleeves, bushings, hardware ect. in a pinch in indescribable. Love the Machine work.
I come from an industrial background, but the machinery is the same. A lot of screw conveyors have a stuffing box on both ends to seal the trough with the bearings outboard. The stub shaft is longer but it allows the use of actual bearings and long life. Great video!
Stuffing box only helps if the farmer actually keeps it maintained, I know the farm I work on is basically allergic to greasing stuff unless I nag them to let me do it, and many farms in my area are the same way.
Excellent repair, Wes. Jobs like that eat up your time, and sometimes you can’t justify the hours. I enjoy watching you work. You are a true professional. Personally I like the variety of your content. Thanks for sharing.
Thanks for another good video, a grain auger makes a nice change from rusted out trucks with electrical problems. When I used to work at the seed farm fixing the auger fleet was my job. I got real good and creative with repairs to some of them, that were worn out and should of been replaced. I still go back once in a while and fix stuff for them if they are busy just to keep my hand in, but luckily it's new augers and service work more now . Yeah that wet rotting grain smell's something unique. I'd say it would be about the same smell and consistency as feeding Max Taco Bell everyday for about 3 weeks, and you certainly don't want to get it on your hands and try get rid of the stink for 2 days after L.O.L Take care.
Jeez Wes, I have to say, just like the Ants Pants channel, your subdued and relatable sense of humor makes all your vids not only educational but completely entertaining. I'm pretty sure your subsciption count is a reflection of this. Try not to overthink stuff and just be you....that's what we want!
As soon as I saw a grain auger coming into the workshop I knew trouble was in store ! I grew up in Western Canada on a farm , as you drive down the gravel roads you see more than one grain auger lined up in neighbor’s machinery parking area waiting to be repaired , nobody has the time to do it during Spring or fall rush so just they get a new one because you can’t stop seeding or harvesting and you can “ fix it this winter” but after you fix one it gets old really fast so they don’t get “round to it” ! Bloody aggravating as every one is different and you can’t seem to get parts for them?
It's so funny,I was telling my Wife that you should have went to work for Nasa,snd then you say it's not a Space Shuttle...lol You are a marvel. Loved that Video. Stay Blessed ❤
That's a great video. Shows your versatility as a mechanic. Nice length, good content. Perfect timing too on a Sunday morning, with it -12 outside. Keep em coming.
34:18 Ese diseño de bujes no sirve. Lo que corresponde para esa aplicación es un rodamiento cónico reforzado montado sobre una placa gruesa de acero (desarmable) con un alojamiento para el rodamiento. Y del lado interno un sello para protección del rodamientos. Obvio, con engrasado. Ese diseño que tiene para "reparar" es una tremenda porquería‼️
Loving the sketchy lathe setup and the weasel wiz cutting lubricant 😂. I did wonder if a double sealed roller bearing on the auger end might have been a better setup? Things are getting all hyped up this side of the pond about torrential snowfall coming. Two inches of the stuff stops most of the U.K. 🙄. G wagon time is what I say 👍😁.
Love the videos and the skill in making the repairs. I am a older serviceman who appreciates fine repairs and not in the most expensive way. Making do with the best materials that work and hold for the long haul. You go Wes!! PS...Anybody comment on the Eve 5 markings on welding tanks. He must be a X-files fan like me!!!!
Go Max! From your fan club. Great video, as usual. A simple job, if you have the knowledge and $100,000 worth of machine tools! Farm implements employ some interesting, and undoubtedly reliable and cost effective engineering design choices. Love it.
Wes, I couldn’t be further removed from what you’re fixing, yet I always watch your vids. My mom’s side were wheat farmers in central Kansas and they would love and appreciate the work you do, sadly they’ve all moved on. It’s incredible the things you fabricate and fix. Cheers from Washington DC. - Early subscriber :)
I really enjoyed this video but it brought something to mind that I hadn't thought of before. I have often proudly proclaimed that he who dies with the most clamps wins. But after watching this video I realized that it may be he who dies with the most jacks wins. You certainly have a vast collection of different kinds of jacks. Someday if you're feeling pressured to get a video out and have no idea what to discuss I would like to see your whole collection of different jacks and where you use them. Just a suggestion. Keep up the good work. PS, I was so moved by Max's performance that I immediately donated money to my local SPCA
Lmfao "max sitting there doing his Aspca Commercial Try outs" don't Forget Wes Max is also doing the Commercial try outs for AARP 😂 26:30 @Watch Wes Work
Air hammers are the true unsung heroes of everybody who turns wrenches and finds themselves responsible for the care and maintenance of rusty junk. I feel stupid that it took me until my mid-30s to finally get one and start using it--they're cheap and will run off of a lousy roofer's compressor. Better late than never, I suppose.
Cool repair. I like your explanation of why the oil lite is the preferred OEM and repair. I wonder if a secondary stainless sleeve on the outside with a couple set screws that could hold the steel/bushing assembly would work then the OEM could sell a replacement kit that drops in.
Ay lmao the death wobble is to stop the grain from jamming so thats perfectly fine! 😮 😂 And its not the first time i've used an angle grinder machine a precision key for sure 🎉 😮 !!!
Please keep doing what you do Wes I love your channel can't wait to see the shop upgrade process you were talking about in the last video everything your doing is very interesting and I love the the humor!
My brother has 5 augers and it's one of the things that breaks the most on his farm. I'm so annoyed by how poorly they are made that i'm genuinely consider making one from scratch to pit against them.
These are built cheap because they sell cheap. Highly competitive industry. I engineered, built and sold these for 40 years. They are only designed to last about 5 years. There are many different styles of end bearing arrangements. You can buy replacement parts from many different manufacturers. The oilight bronze is the cheapest. The option that uses a pillow block ball bearing is the best but requires a stand off trough end and a longer tail shaft to accommodate it.
@@rkan2I I don't work with grain augers but in another contaminated environment. The problem with roller element bearings is that if you get crud in them, they jam and the rollers skate rather than roll and wipe out the mating surface. Plain bearings suffer less. In my ignorance I would like to try a plastic bearing and a stainless shaft (for wear resistance) but it's hard to retrofit that since swapping metal for plastic kinda needs to be considered at the beginning of the bearing design. Exotic high performance plastics which could maybe swapped for metal exist, but they're also expensive.
@@rkan2you can if it is a pillow block bearing sitting on an outboard pedestal as I explained above. You can buy this conveyor new with this arrangement but the cost will add about $1000 to the sale price. Most of the farmers don't consider this a necessity until the sleeve fails. Remember that the highly competitive nature of the grain industry prevents the manufacturers from adding this feature unless they are willing to provide it at their own cost. Conversely on the heavy duty industrial side it is the opposite. Most industrial clients are more than happy to pay for any enhancements that add to the longevity of their equipment due to costly downtime and loss of production. Farmers just want to get thru the harvest and worry about repair and maintenance when the next season starts.
@@billyporterfield2196 I guess that kind of translates to when your farming operation is large enough where you can buy machinery that is basically "heavy machinery" :P Not so with this auger.
I can only imagine how much time was actually involved including the video and editing. Farm machinery repairs can be some of the most difficult due to the designs as you pointed out several times. You made it look easy and it was very enjoyable to watch. Thank you for the video.
My dad and I used to fix these things for the local farmer when I was a kid. I never knew how they managed to screw them up so bad, but I always despised working on them. You could always guarantee a weld job was coming. All the ones I've seen were PTO driven, so probably worse damage happened if you consider I don't ever remember seeing a slip clutch on them. Farmers will run the life out of things for sure -but generally out of desperation and not ignorance. Like how you removed the coupling ..just got a flashback to a 3 point spreader I bought last year.
nice job man, your setting yourself up with a quite capable shop, if you ever get tired of doing videos.i can only imagine the projects wes & son will getting into in a few years.the kid will have the coolest toys for hundreds of miles around.or refurbishing antique tractors by 12.
As always, great video, editing, and outcome. Love seeing all the tools and machines (first aid kit included) getting a workout in the shop. Look foreward to the next project you share with us! And poor poor max, always trying out for the ASPCA awards and never getting the recognition he deserves outside of the shop 😅
Great machine repair video, I like it. Please do more! Your skill level at fixing things is awesome your only limitation is your resources. A good machinist is valuable. I’ll bet fixing that grain auger is more valuable to the customer than fixing his car or truck. I hope your hand gets better soon.
Everytime I grab a hammer of any kind No matter how skilled I am with it I always get Injured lol No Joke most handy And dangerous tool in the shop for sure 21:00 @Watch Wes Work
The saying isn't "grinder and paint Makes me the welder i Ain't". Should be "Lathe and Paint makes me the welder I aint". lol 😂 look at how clean and smooth them welds are 😂 well after the lathe 😂😂 17:36 @Watch Wes Work
We used to use what’s called a Babbitt tail bearing on the tail end of those augers. It’s basically a lead filled cast iron housing that bolts onto the end plate. They wear slowly and in addition to providing lube for the steel tail pin they prevent them wearing down in diameter also.
Wes: I got about 12 hours into this job, it's just difficult to find that much time to work on a single project...
Me: I tell you what's even more difficult to find.... A machine shop in the middle of a corn field and a machinist who is willing to work on a corn auger for 12 hours...
Good professional factory repair Wes, awesome video and content.
Wes is amazing.
If Wes Works, they will come…
I'm surprised they didn't just weld the coupler to the shaft, must be a new farmer
The workshop is kinda open again for the public because Wes choose what he'll take. That is great to see.
@@M.TTT. maybe coulda woven a Chinese handcuff outa bailing wire, but it’s subject to work hardening…
It always amazes me at how many man hours you put into these project to make them workable. Its even more amazing when I have to assume you give an equal time to editing these videos and give us content every week aside from your family life. BTW, I'm pretty sure I saw Max's picture on the ASPCA mail I got last week. Well done and thanks Wes!
Filming at least doubles the time. Editing is another 6-8 hours, though this one went pretty quick.
Excellent video Wes. I’ve been an automotive tech for over fifty years and learn something new with almost every one of your videos, keep ‘em coming.
Thanks Wes. I worked on grain bins, augers, belt elevators, etc. about 25 years ago as a summer/weekend job. I can attest that rotting grain is enough to gag a maggot, every single piece is always rusted, oblong, wallowed, broken, and mostly designed to never come off, and that no auger has ever been repaired willingly and without a blood sacrifice. Thanks for the memories. Working that job made me drop pre-med to go into engineering. I mostly hate people, so I think the world is a better place because of that.
Like the Area Diesel Service hoodie..!!
So you design the machines that hate people. Get rid of them directly, or go big and have the machines do the work…
😂 I can relate
You didn’t have to tell us you hated people, it was self evident when you said you were an engineer. lol.
Wes says he used all the tools.
I says Wes used all the skills as well. Superb job - especially the flawless weld.
(and Kudos to the Oliver tractor, stored outdoors in freezing weather, actually starting!)
Love the hybrid repair and machining content
“It’s a grain auger, not the space shuttle” classic. Wes I love you. Keep it up 👍🏼
Appreciate the combined engineering/manufacturing/repair videos. This was great!
Yet again Wes, you have proved how capable an all round engineer you are and how wide your understanding of the different systems you work on is. More power to you and well done on proving you can edit and produce videos to an equally high standard. Thank you so much for all your time and efforts.
GREAT WORK!!! I have no idea what you charge for a job like that one but I'm sure it would have cost that farmer a lot more if he had to buy a new one. Your talent far exceeds that of a garage mechanic. I am throughly impressed. .
At 50 an hour that's 600
Plus parts .
Cheaper then buying a new one
More like at least $2K plus supplies, so maybe $2400. I am guessing that auger was $20-25K, but that is a total guess.
@JobyFluorine-ru4bd $50 an hour, they have got to be joking. By the time Wes tokes out all his costings, he would be down $50 an hour. More like $180 an hour. As an old mechanic once told me, it's not the hourly rate, it's what gets done in that hour.
Fifty dollars per hour for labor is laughable. Imagine the tools, expertise, and knowledge a person needs for these jobs.
He might do it for $50/hour. Because the owner lent him a tractor for a couple of days last year. Or because the guy's neighbors grandfather sold him that lathe at a massive discount when he retired 15 years ago.
Idk, had a local guy give me a massive discount on some work recently so I'm inspired to spread the spirit of generosity around lol. (Not that I want anyone to undervalue their work)
I loved Max's ASPCA stance! I could here Sara's "Arms of an Angel" as Max took his majestic pose! I think the rotten corn smell can be relatable to those moonshiners back in the hills. You gave those not in a farming community a taste of the sort of battles farmers face on a regular basis. Great Video Wes.
Yep ain't nothing like farming 😍
Great tailstock setup! I bet the pucker factor was elevated when you were working on getting that aligned. Thanks for bringing back some machining videos.
spindle side is the headstock
"Max and the pose for the ASPCA commercial"... Perfect line. Wes, your humor really does add a lot to all your videos. LOL!
Well Wes it looks like you have found a direction to go in for your videos. Good thing you started out as a machinist and were able to refurbish the old equipment . Seems to be paying off. 👍. Artie
It sure is handy!
Another great line, "I tried asking nicely" almost beats "It's only temporary unless it works" Brilliant! Thanks Wes
I never heard the word please during that time
2 things Wes: 1. very well edited, as usual, I never get itchy to fast fwd or abandon midstream; 2. curious for my own knowledge if antisieze in the couplings would make future removals easier. We get lot of "weather" in Indiana and I'm always looking to make life better for future me. Maybe a third thing, continuing to support your request of feedback in an earlier video, I am a fan of the eclectic content on your channel, most of us live a normal life and we have many things to repair, or interests to feed. 11,000 views in one hour is a pretty good tell as well that your formula hits with a lot of other people too.
I used some fluid film. It helps a bit with removal. Nothing is really going to help. The dust gets into everything.
And if you use the wrong thing the dust just sticks to it and gathers faster, it's a cruel mistress
This is actually a good point. I never noticed, but yeah, with other channels I tend to skip or 2x through some slower bits, with WWW videos I've never wanted too. Heck, sometimes I rewind.
@@TheFool2cool there isn't anything more cruel than petroleum coke dust and we always used "Never -Seeze" . Made the difference many a time.
as someone else said I think the hybrid repair / machining videos of yours are my favorite. Especially with the quality of work you do.
Measured once, cut it twice and it was still too short. We've all been there.
Luckily it was only short on one end. 😂😂
I thought it was on purpose for future adjustments.
My rule of succes: Measure with the caliper, scribe with chalk, cut with the axe.
When i was growing up on a farm, I never in a million years, would have watched a video about an auger repair, but here I am. Funny how you circle back to your roots. Thank you, sir, for all your hard work making these awesome videos for us. Absolutely one of my favorite channels!
Wes, I'd like to pass on a compliment that my late wife paid me on day. You'll figure it out, you always do. That simple statement almost brought me to tears after all the years of silence from her on the various jobs one will do around the house and garage. Keep on keeping on, Wes. You got this!!
like laying around fishing and waiting for a nibble... Like a nibble an idea WILL come around....
😂 my wife said." It's a good thing I keep you around " your my handiess man...😅😅😅
I came to the conclusion when I was a much younger man that machines were easier for me to understand than human beings. I also readily admit it is as much my issue as it is an issue with others. I just prefer to avoid people when possible.
My wife says if your man ain’t handsome he best be handy.
For the record I’m quite handy.
@kge420 She be watching Red Green!
Yay! A Wes video! I was beginning to get a little worried about you. I'm completely impressed, as usual. Great job. You asked what your viewers enjoy? This. This is what I enjoy. The creative brain of Wes wins again.
Your perseverance in the face of life’s roadblocks is amazing 🙂 much respect ✊
Grand save!
Am I watching snowball engineering
That was a great video. I really enjoyed watching you take a worn out grain auger and overcome whatever obstacles came along to make it new again to serve for many more years. It doesn't matter what you work on, its just amazing to watch you pull something apart that was hopeless and use many different tools and techniques to bring it back to life.
Wes, this is one of your best yet. Anybody can do brakes and fix rusted brake lines. But you showed us your talent and know-how on this one. I loved seeing you use all that big equipment we've all seen sitting around in the background. This was by far, one of your most interesting videos.
I agree, that was really great. It takes a special set of skills and knowledge to do a job like that, and do it well.
Very cool, I grew up around farms and my grand parents owned a grain elevator. Fixing augers that the grain dust ate up was a constant like you said. Cleaning out the rotted grain in the pit around the grain dump basin was always one of the most gag inducing tasks we had, so I can empathize on the rotted corn smell. Have a great day sir, may you and yours be safe.
Just don' a gas mask and it doesn't matter what's in front of you :P
Especially if it's mixed with rust for some reason.
I grew up in the first small farm town north of Flint Michigan and sometimes help friends who lived on farmstead.
That became one thing I avoided at all costs after the first time no matter how much they'd beg me to help.
That and mucking livestock structures.
I am a born and bred “City Boy “. I thought we were going to make “pop corn “ for a minute there!
@rkan2 the mask slows you down to much
@@adamdnewman A blower mask won't.
Wes, you decided on the CEE repair to the drive shaft and it looks great! Most people don't appreciate how destructive spoiled grain and water are to farm equipment (rotting soybeans smell worse). You have a good lathe setup, and glad to see someone in NW Illinois still knows how to use one! -17F this morning at my place, so I agree that Winter has self corrected.
All Wes needs is a couple of birds that hang out and his dog wearing a camera.
It was -17 here too. Max wanted to go for a walk. We barely made it across the road.
CEE Is one of my favourites. The Crane teardown and rebuild is going to be done as thoroughly as Wes would do it.
@@IGDZILLA I think that the Frana Crane could keep Wes and Kurtis in content for the next year.
@@WatchWesWork I'm in NE Wisconsin and the last few days, even our Saint Bernards didn't want to go out. LOL
I know at least half a dozen farmers who'd love a shop like yours nearby, those machines (and spare parts for them) are so ridiculously expensive that even a $2000 repair is a real bargain.
Hello Wes,
I’m not a professional comments writer; in fact, I don’t speak English very often, as I’m from a little post soviet country, but I like to watch your videos, because they’re about finding the solution for unsolvable (sometimes) problems.
I just wanted to thank you for the great content you make, and wish you and your family the best
Your English is excellent. Your comment was at a higher reading level than most native English speaker. Don't be afraid to comment anytime in English..
cutting edge engineering would be impressed with that machining i bet. way more impressive than what i could ever do. I always enjoy your thinking out of the box on how to fix things.
Good call mate 😂.
Wes, An interesting example of diligent work and repair of the old grain elevator . Your mechanical and machinist ability is amazing. You definitely not afraid of going the extra mile and investigate and figure out and resolve issues. The farmers in your rural community are very lucky to have You and Your Dad in the area.A Fan from New Brunswick CANADA
Nice to see the old lathe again. Enjoyed the video. Bet the skidsteer is proving its worth in the snow.
As I begin to push 70 I revel in the times where watching someone work takes me back to my boyhood days back in NW Indiana. My dad was a machinist. The neighbor down the street was a machinist-fabricator. Watching either of them create working mechanical equipment from scratch was better than a magic show in my book.
Thanks for taking me back to some very wonderful memories. I spent a few days in industrial maintenance myself, and still watch in awe as things go back together far better than they were assembled in their beginning.
Good on ya, man!
I imagine Mayrath has a huge number of fixtures specific to the augers, and procedures, like removing the axle A-frame so as to fix the fixed bits better. But, I'll wager they would not shave more than 10 man-minutes' labor off the job. So, good job @Wes
And, as always, a great video.
No boats
No RV's
No exceptions
But Grain Augers?
Great job. My dad had an auger similar to that when I was a kid and that bushing would only make it a couple of years. We finally welded some angle on to the funnel box and put a self aligning pillow block bearing on it.
yea that's what this needs, not sure why they use a bushing
Ditto. I used to sell bearings and gear boxes. I asked one time why farm equipment had such cheap gearings. The trainer told me, farmers are cheap and they use their equipment about 3 weeks each year. Bearing upgrades are worth it for sure.
Hi Wes,
In a previous video you asked what sort of videos your viewers like to see. For me, it's this.
Any schlub can diagnose and replace car parts. It's far more interesting to watch you solve problems that require more than that, and it's very interesting seeing equipment that I don't see every day, like the ag and construction stuff. It's good stuff and is what sets you apart from the other channels in this space,
Wes -- "The last stop before the crusher". Always entertaining -- thank you
Death wobble? That ain't nothing the Pakistani Truck channel wouldn't consider perfect!
The feeling one gets when you have the equipment and know how to make your own Shafts, sleeves, bushings, hardware ect. in a pinch in indescribable. Love the Machine work.
I like your attitude! You seem to say, "BRING IT ON" ! That's why I watch Wes Work!!
I come from an industrial background, but the machinery is the same. A lot of screw conveyors have a stuffing box on both ends to seal the trough with the bearings outboard. The stub shaft is longer but it allows the use of actual bearings and long life. Great video!
That would be nice.
That makes more sense, but also more cost.
Stuffing box only helps if the farmer actually keeps it maintained, I know the farm I work on is basically allergic to greasing stuff unless I nag them to let me do it, and many farms in my area are the same way.
Archimedes would likely bestow a nod of approval-
Excellent repair, Wes.
Jobs like that eat up your time, and sometimes you can’t justify the hours.
I enjoy watching you work. You are a true professional.
Personally I like the variety of your content.
Thanks for sharing.
Stay warm and safe . Freezing cold in Mc Henry county Illinois ❄️🥶⚠️
Thanks for another good video, a grain auger makes a nice change from rusted out trucks with electrical problems. When I used to work at the seed farm fixing the auger fleet was my job. I got real good and creative with repairs to some of them, that were worn out and should of been replaced. I still go back once in a while and fix stuff for them if they are busy just to keep my hand in, but luckily it's new augers and service work more now . Yeah that wet rotting grain smell's something unique. I'd say it would be about the same smell and consistency as feeding Max Taco Bell everyday for about 3 weeks, and you certainly don't want to get it on your hands and try get rid of the stink for 2 days after L.O.L Take care.
Good content. I’m glad you were able to do the repairs indoors. (That was a game changer back in the day.) 🥶
Very professional work Wes! And 42 min long.. Enjoyed every second of it! Kudos to you Sir!
Not one joke about the standard of preventive maintenance! Mebbe a sort of visual joke? Good job and probably the most economic solution possible.
Never thought I’d enjoy watching Wes fix an auger. This was a fun one and I’m glad I chose to watch. Nice work!
Jeez Wes, I have to say, just like the Ants Pants channel, your subdued and relatable sense of humor makes all your vids not only educational but completely entertaining. I'm pretty sure your subsciption count is a reflection of this. Try not to overthink stuff and just be you....that's what we want!
As soon as I saw a grain auger coming into the workshop I knew trouble was in store ! I grew up in Western Canada on a farm , as you drive down the gravel roads you see more than one grain auger lined up in neighbor’s machinery parking area waiting to be repaired , nobody has the time to do it during Spring or fall rush so just they get a new one because you can’t stop seeding or harvesting and you can “ fix it this winter” but after you fix one it gets old really fast so they don’t get “round to it” ! Bloody aggravating as every one is different and you can’t seem to get parts for them?
It's so funny,I was telling my Wife that you should have went to work for Nasa,snd then you say it's not a Space Shuttle...lol
You are a marvel.
Loved that Video.
Stay Blessed ❤
That's a great video. Shows your versatility as a mechanic. Nice length, good content. Perfect timing too on a Sunday morning, with it -12 outside. Keep em coming.
Question, That electrical howling noise in the background, are you using a roto phase converter?
Who tough that a few taps on the oil gauge would solve an oil pressure on the engine!!!! I’ll try later on mine to see if it works. 🤣🤣🤣🤣
It works in action movies.
34:18 Ese diseño de bujes no sirve.
Lo que corresponde para esa aplicación es un rodamiento cónico reforzado montado sobre una placa gruesa de acero (desarmable) con un alojamiento para el rodamiento.
Y del lado interno un sello para protección del rodamientos.
Obvio, con engrasado.
Ese diseño que tiene para "reparar" es una tremenda porquería‼️
Loving the sketchy lathe setup and the weasel wiz cutting lubricant 😂. I did wonder if a double sealed roller bearing on the auger end might have been a better setup? Things are getting all hyped up this side of the pond about torrential snowfall coming. Two inches of the stuff stops most of the U.K. 🙄. G wagon time is what I say 👍😁.
Love the videos and the skill in making the repairs. I am a older serviceman who appreciates fine repairs and not in the most expensive way. Making do with the best materials that work and hold for the long haul. You go Wes!! PS...Anybody comment on the Eve 5 markings on welding tanks. He must be a X-files fan like me!!!!
Go Max! From your fan club. Great video, as usual. A simple job, if you have the knowledge and $100,000 worth of machine tools! Farm implements employ some interesting, and undoubtedly reliable and cost effective engineering design choices. Love it.
The average farmer must be able to figure it out after sitting on a combine for a straight week without much sleep
Awesome skills, could watch all day. Brilliant.
Wes, I couldn’t be further removed from what you’re fixing, yet I always watch your vids. My mom’s side were wheat farmers in central Kansas and they would love and appreciate the work you do, sadly they’ve all moved on. It’s incredible the things you fabricate and fix. Cheers from Washington DC. - Early subscriber :)
I am sure not many shops would have ATTEMPTED that job. Great video/work............Jay
Probably not. Mostly because it's big and unusual.
I really enjoyed this video but it brought something to mind that I hadn't thought of before. I have often proudly proclaimed that he who dies with the most clamps wins. But after watching this video I realized that it may be he who dies with the most jacks wins. You certainly have a vast collection of different kinds of jacks. Someday if you're feeling pressured to get a video out and have no idea what to discuss I would like to see your whole collection of different jacks and where you use them. Just a suggestion. Keep up the good work.
PS, I was so moved by Max's performance that I immediately donated money to my local SPCA
Yeah I probably have two dozen.
I liked your video. Your efforts are very much appreciated.
I really enjoy your videos wes, you have a style that noone else comes close to. Doesn't matter what you are doing I end up interested.
Lmfao "max sitting there doing his Aspca Commercial Try outs" don't Forget Wes Max is also doing the Commercial try outs for AARP 😂 26:30 @Watch Wes Work
Fantastic work and video as always Wes, really loved seeing you break out the Sketchmaster 5000 turning machine for this video
Air hammers are the true unsung heroes of everybody who turns wrenches and finds themselves responsible for the care and maintenance of rusty junk. I feel stupid that it took me until my mid-30s to finally get one and start using it--they're cheap and will run off of a lousy roofer's compressor. Better late than never, I suppose.
Cool repair. I like your explanation of why the oil lite is the preferred OEM and repair. I wonder if a secondary stainless sleeve on the outside with a couple set screws that could hold the steel/bushing assembly would work then the OEM could sell a replacement kit that drops in.
Ay lmao the death wobble is to stop the grain from jamming so thats perfectly fine! 😮 😂
And its not the first time i've used an angle grinder machine a precision key for sure 🎉 😮 !!!
Please keep doing what you do Wes I love your channel can't wait to see the shop upgrade process you were talking about in the last video everything your doing is very interesting and I love the the humor!
This is why I love your channel. Who else on UA-cam works on this stuff?
My brother has 5 augers and it's one of the things that breaks the most on his farm. I'm so annoyed by how poorly they are made that i'm genuinely consider making one from scratch to pit against them.
These are built cheap because they sell cheap. Highly competitive industry. I engineered, built and sold these for 40 years. They are only designed to last about 5 years. There are many different styles of end bearing arrangements. You can buy replacement parts from many different manufacturers. The oilight bronze is the cheapest. The option that uses a pillow block ball bearing is the best but requires a stand off trough end and a longer tail shaft to accommodate it.
@@billyporterfield2196Why couldn't you put a roller bearing in place of the bronze sleeve?
@@rkan2I I don't work with grain augers but in another contaminated environment. The problem with roller element bearings is that if you get crud in them, they jam and the rollers skate rather than roll and wipe out the mating surface. Plain bearings suffer less. In my ignorance I would like to try a plastic bearing and a stainless shaft (for wear resistance) but it's hard to retrofit that since swapping metal for plastic kinda needs to be considered at the beginning of the bearing design. Exotic high performance plastics which could maybe swapped for metal exist, but they're also expensive.
@@rkan2you can if it is a pillow block bearing sitting on an outboard pedestal as I explained above. You can buy this conveyor new with this arrangement but the cost will add about $1000 to the sale price. Most of the farmers don't consider this a necessity until the sleeve fails. Remember that the highly competitive nature of the grain industry prevents the manufacturers from adding this feature unless they are willing to provide it at their own cost. Conversely on the heavy duty industrial side it is the opposite. Most industrial clients are more than happy to pay for any enhancements that add to the longevity of their equipment due to costly downtime and loss of production. Farmers just want to get thru the harvest and worry about repair and maintenance when the next season starts.
@@billyporterfield2196 I guess that kind of translates to when your farming operation is large enough where you can buy machinery that is basically "heavy machinery" :P Not so with this auger.
25:47 Not IC Weld warp speed mixture adjustment
Great job Wes. Pleasure to watch you repair equipment. Thanx
I can only imagine how much time was actually involved including the video and editing. Farm machinery repairs can be some of the most difficult due to the designs as you pointed out several times. You made it look easy and it was very enjoyable to watch. Thank you for the video.
Great repair! I’m amazed at the variety of things you work on and are able to actually fix. Thank you for bringing us along.
My dad and I used to fix these things for the local farmer when I was a kid. I never knew how they managed to screw them up so bad, but I always despised working on them. You could always guarantee a weld job was coming. All the ones I've seen were PTO driven, so probably worse damage happened if you consider I don't ever remember seeing a slip clutch on them. Farmers will run the life out of things for sure -but generally out of desperation and not ignorance.
Like how you removed the coupling ..just got a flashback to a 3 point spreader I bought last year.
nice job man, your setting yourself up with a quite capable shop, if you ever get tired of doing videos.i can only imagine the projects wes & son will getting into in a few years.the kid will have the coolest toys for hundreds of miles around.or refurbishing antique tractors by 12.
Why not welding the shaft and the kuppling together ?
These type of repair videos are my favorite.
You won't hurt my feelings if you show more of them 👍👍
As always, great video, editing, and outcome.
Love seeing all the tools and machines (first aid kit included) getting a workout in the shop.
Look foreward to the next project you share with us!
And poor poor max, always trying out for the ASPCA awards and never getting the recognition he deserves outside of the shop 😅
man Wes can fix anything. incredible with enough machine tools Wes could rule the world.
This whole video is why you will survive the apocalypse. God speed brother
Great machine repair video, I like it. Please do more! Your skill level at fixing things is awesome your only limitation is your resources. A good machinist is valuable. I’ll bet fixing that grain auger is more valuable to the customer than fixing his car or truck. I hope your hand gets better soon.
Everytime I grab a hammer of any kind No matter how skilled I am with it I always get Injured lol No Joke most handy And dangerous tool in the shop for sure 21:00 @Watch Wes Work
Excellent work,very talented mechanic/ machinist.👍🏼
The saying isn't "grinder and paint Makes me the welder i Ain't". Should be "Lathe and Paint makes me the welder I aint". lol 😂 look at how clean and smooth them welds are 😂 well after the lathe 😂😂 17:36 @Watch Wes Work
I love your new video format Wes. More of these fix-it/fabricate vids please. 🇨🇦
We used to use what’s called a Babbitt tail bearing on the tail end of those augers. It’s basically a lead filled cast iron housing that bolts onto the end plate. They wear slowly and in addition to providing lube for the steel tail pin they prevent them wearing down in diameter also.
I really like the long indepth videos. Nice work W3
Wes thanks for always thinking of us who use the metric system.
Looked like you really enjoyed this job Wes ! As always all the skills and thorough 😅
At least it wasn't soybeans.
100% correct on grease and dust !
Haha max was not pleased with your comment!
Nice video and great repair. Having a lathe and mill lets you fix just about anything with some creativity.
Well that's one way to Put a 14 foot Rod In your Lathe 😮😂 nice work 15:48 @Watch Wes Work
Great video Wes! It showcases many of your great talents quite well. Quite impressive!
Well the straps left you markers are were the motor and Shaft Coupler need to go back 😂 7:13 @Watch Wes Work