RockJock's Jeep JL Front Antirock Sway Bar Installation.
Вставка
- Опубліковано 20 чер 2019
- Complete, step by step installation video for RockJock's front Antirock Sway Bar kit for the Jeep JL Wrangler.
#Antirock #RockJock4x4 #RockJockJL #GetAnAntirock #JohnCurrie
I am a little confused. There has to be more of setup process, getting it adjusted right? I the video they did nothing but install it.
I currently have JKS quick disconnects which required that I cut the passenger side mount on the axle housing. I see in the video that there is a misalignment spacer being used but I don't have the other side, if you will, so will that still work?
Actually for a question that specific, can I have you call us direct, so we can address this with you in person? Please give us a shout; 714.367.1580. Either Brian or Travis can help with that. Thanks!
@@RockJock4x4byJohnCurrie I have this issue as well. Rubicon Express quick disconnects required the passenger bracket be cut off.
I've hit a hog and it broke the motor on my JLU Rubicons electric sway bar and paying 1500 for a new one doesn't sit to well with me. Will this be able to replace it? I don't really know what direction to head in. I want to be able to articulate fully when wheeling but the product didn't look like it has a disconnect but it might not need one I guess. And will this work with any lift kit? Say 3.5 to 4 inches? Any help would be great thank you.
Yes, this will be able to replace it.
does the arm need to be at any position ? level or higher with the frame? as the video looks like they are pointed upwards and not level?
Hello Steve, the arms are to be level at the midway point in the vehicle's travel. Obviously, this kit out of the box, is designed to be at midway thru the travel of our kit. If you are putting on a custom vehicle, we recommend setting the differential at midway thru it's travel that your suspension build provides, then set the arm level, and then measure from hole to hole for proper end link length. Thank you!
@@RockJock4x4byJohnCurrie great thanks i was looking into getting one of these once this madness is over and get it installed as soon as i get it lol and i didnt see it there - im sure the directions would have explained - thanks a bunch be safe !!
@@stevep6108 no problem! You take care and be safe as well!
can I reuse another sway bar end link in this kit ?
Hello sir, when you say "reuse", you already have some Antirock links and you want to use them with our JL kit? As long as the Antirock links that you have feature the 8 1/2" gold, threaded link rod, you can reuse them, yes. The 8 1/2" rod links are what come in this kit. Thank you!
@@RockJock4x4byJohnCurrie sorry what I meant is if I can use another end links that doesn't come with Antirock kit? I have STEER SMARTS YETI XD FRONT SWAY BAR END LINK KIT - 2.5-3.5IN LIFT
@@luisan027 oh, gotcha. To be perfectly honest - I don't know. I've never actually seen one of those links in person. I know a customer of ours had used them on his JK and they seemed fine, but that is unfortunately the extent of my knowledge on the Steer Smart links.