This is a great "real world," test. Every morning when I get to the job-site I connect my drill to another drill and run them against each other at full power. The one that doesn't catch fire gets used that day.
I do exactly the same thing, but with my truck, I start one and leave the starter going until it catches on fire, 🔥🔥️🔥️🔥, then I'm sure that I need a 500 buck starter, heck I'm not going to the mechanic to get fooled. 👍
@@dimasuracalvinjake683 , The sarcasm landed 500 million miles away from you, he's not "butt hurt" he's just making a point that both tools are good and that under normal use that shit will never happen, unless you're a real brute moron, which in that case, you wouldn't get hired at a job site or any job for that matter.
No in order to get the best drill connect them which one lives gets to go on to breed with the next strongest thus creating the best drill in the world
In my experience, electricians always use Milwaukee, and framers use DeWalt. Real talk, everyone has the brand they have because the first one they bought has the same battery as the next one you buy, hence me having a giant toolbox full of dewalt tools.
99.9% of our plumbing power tools in my shop are Milwaukee, if only Dewalt specialized in more than just drilling & cutting they would be on top, build quality & power are superior on my personal dewalt xr 20v brushless hammer/drill versus my company supplied Milwaukee Fuel hammer/drill, I dont bother with the Milwaukee drill unless my dewalt batteries need a charge lol
@@odtuhan yep. It is only the new max output batteries or the batteries included in a bundle, just FYI. But as you said, it is the battery that goes bad so it makes it more than worth it to me
i bought an m12 combo kit with a drill and impact 8 years ago and i honestly just want them to die already so i have a reason to buy the new models. ive dropped my impact from a 3 story building onto concrete and ive left it out in the rain overnight and it just chugs along.
Thank you, this is what made me decide on what id want for the cordless drill id get. Got a Milwaukee for a variety of home projects and it worked great. and as a side note, i left the rechargeable battery out for about 3 weeks and plugged it back in and it still had nearly its full charge when i had to knock some holes in the wall to run some cables. Love it and it works exactly for what i needed it for, i kinda go out of my way to find reasons to use it now. Great buy, highly reccomend.
I have nearly every brand and price point of drill, and for the value I think Rigid makes a very solid, compact, entry level cordless drill. I personally like & use the Fuego set. DeWalts are good, but the Milwaukee vs Rigid for impacts are nearly the same apart for the trigger. The Milwaukee had a little more control and a slightly better feel. Look around at Home Depot and see what you like. Oh yeah by the way, DeWalts are smokers.
I was born and raised Dewalt for a very long time but I was given a new Milwaukee impact and was so impressed I ended up buying some of other Milwaukee tools and tried them and was very impressed I will only use Milwaukee for now on definitely makes in difference for me
The Milwaukee has a stop relay when overloaded so it just locks when overloaded. The de Walt just keeps running and starts smoking. So this is not a good comparison.
It's a fine comparison, seeing as how Milwaukee has a feature that makes it both safer to use and more durable as a result. The DeWalt is an inadequate tool for heavier use.
I think it's a good comparison. Ones made with safety and makes it so my dumbass wont break it. Dewalt be smoking like snoop and I think that makes it trash. Yes the good one costs more but it's worth it and it's only $50. Health insurance costs more and you need that to live.
Yeah I agree and also the dewalt has a brushed motor. BTW I know I'm late to the comment section but he should have purchased at least a brushless dewalt if he's comparing the 2. There's dewalt brushless drills for right around the same price as the milwaukee drill.
I still have my 14.4V Dewalt I used when I did production Carpentry before the housing crash... Only replaced trigger one time...have had drill for 15 yrs same battery !!! Now they probably do not make them like they used to IDK....
SilentGhilly if you managed to break a dewalt drill in anyways short of blowing it up. Then you where using the drill in a way it was not meant to be used
It would be interesting, but Hitli isn't really relevant to most people watching his videos. Hilti makes nice stuff but its mostly for large contractors not the Wranglerstar audience.
+dminor214 That's not fair, Hilti is in another range and don't have a hobby line for the Milwaukee to own. Pro line DeWalt and Hilti are pretty much equal and you can't get Milwaukee's in that class.
I love watching your videos. Just a thought, you should consider keeping a record of head to head competitions of equivalent tools and making a March madness style bracket to see which is best. Each video you could move the winners forward to keep track.
I think we all say "Do as I say not as I do." at one time or another. To be fair, there's nothing about this that is proper anyhow haha. It is very interesting and entertaining none the less though. I enjoyed this video.
It’s funny how every trade leans towards a different brand. Where I’m located, framers DEWALT, Tin knockers Makita, Pipefitters Milwaukee, Sparky’s are all over the place haha
There is a difference in doing timber framing and screwing lids on to connectionboxes, and everything inbetween. The sparky I know carries two, one for hanging cable ladders, and a small one one for everything else
I don't think it's an apples-to-apples comparison. $150 will buy a brushless Dewalt drill, which includes a better chuck (more in line with what the Milwaukee uses). I'd be interested in seeing a comparison of those two. In short, if you're going to set the price bar at $150, then there is a better Dewalt drill to be compared. Steve
stuff I wouldn't agree, dewalt can just as easily charge just as much as the Milwaukee and add the nicer features. These are both of there cheapest lithium ion drills. There both the lowest end drills you can get from the either company. I think it's a fair comparison. What I don't think would be fair is if you went the next tear up on the dewalt and still used the bottom of the line Milwaukee.
Alec Ver Bunker, in the real world, price versus performance should be the consideration, i.e. value. I'm simply suggesting that if you take the Dewalt (or any other brand) that most closely aligns with the Milwaukee price, then Dewalt may indeed give more bang for the buck. On the other hand, it may smoke too.
Loved this test. Very useful for when I want to drill my drill with another drill. Something I do very often on site. I must have gone through at least 100 drills so far drilling my contracting mates's drills. I now know what brand to go for, thank you!
not bias at all! 1. He was screwed over by a dewalt sponsorship a couple years ago. 2. That's an entry level BRUSHED Dewalt vs a BRUSHLESS not entry level Milwaukee. Not even close to a fair test.
I used to work in construction dealing with a lot of concrete work and sometimes redo a lot of concrete with metal framing. Dewalt works pretty good is decent but doesn't last long. I switch to milwaukee because i got a deal on home depot and last me years was suprised how much it held up and battery life was great.
I have had a lot of experience with both lines of these tools. Went a lot of years with Milwaukee and after about 1 1/2 years all the Milwaukee's were going down hill so i decided to try the cheaper De Walt. Very similar service up to the 6 month period but after that it was down hill pretty quick. We normally had our tools repaired at Home Depot but the big difference was the time it took to get them repaired. The De Walt had to go back to the factory. I think either would be good for the average do-it yourselfer but in a commercial setting the Milwaukee wins out. I enjoy your videos and they spark a lot of ideas for me, keep up the good work.
Hey Cody, love your videos always. But for these, it would be great to see you actually test them with real world tests first. Don't get me wrong, I LOVE seeing these get destroyed, but actually knowing which one can be the better drill in everyday use is the only important take away. Thanks and God Bless you!
That is how the best inventions and enterprises ever on human history started. The wright brothers, Henry Ford, and Nicola Tesla had this kind of accidents, they were misunderstood and then they changed the world. People with no fear of failure and the will to do inventions and not afraid of others opinions
15 years ago I bought a Milwaukee 2601-20 and it worked like a champ. I added the M105.0 5AMP HOUR battery when it became available and this created a monster of a tool. It is actually a little too much battery for this drill as you could overheat the drill if not careful Despite quite a lot of abuse, it still works like a champ to this day. I recently added a hammer drill, the Milwaukee 2804-20. They claim better technology, including limiting circuits to protect the drill. Sure enough, the drill will cut out on me before it is allowed to heat up and the end effect is that it is actually less powerful than the old drill. I reserve it for the hammer drill function which is a must when drilling into concrete. I have no reason to even consider another brand. That being said, regarding DeWalt, My dad bought a DeWalt radial arm saw back in 1964 for building boats, and it is still in service today in my garage. This is long after similar craftsman saws have rusted away.
I don’t know if you can really say they rusted away as a form of how good the tool is being that a radial arm saw rusting out is really more of a user error then how good the tool is.
It's not always about power alone, reliability and durability matter for me a lot more. This is why I went with a Makita. Regardless, you can't go wrong with any of these
I've been to a couple of construction industry shows, and without fail dewalt and milwaukee both have booths to show off and compare their tools, the newest generation of brushless lithium ion tools from both companies are pretty good, but milwaukee's tools always outlast in the torture and power tests, as my portercable and dewalt tools slowly die out I've been slowly converting over to the milwaukee fuel system and I love it. As a side note, you might want to double check the box, because milwaukee usually ships belt clips for their drills packaged with the instruction manual.
I was all Dewalt until a few years ago. My dewalts were dying, so I decided to give Milwaukee a try. I use these tools heavily, daily as a handyman. I would NEVER go back. Milwaukee is a far better tool. Might be more expensive, but when they earn your living, quality is far more important than initial price. I currently have 3 sets of drivers, sawzall, 7 1/4 circular saw, and some of the little sawzalls for cutting out sheetrock. I have no complaints except that occasionally I have to double pull the trigger on the impacts to get them to drive at full power.
I learned a lot from this video! I can save $50 buying a Dewalt and if I don't attach another drill to it, it will last more than 15 minutes! - Love the dewalt 20v impact driver - don't even use a drill much anymore!
Lol true, however, depending on your trade, skill level, length of jobs, access to working outlets, ect. the Milwaukee (IMO) is indeed the superior drill, impactor, Sawzall, hackzall, angle drill, and most anything else that they both make. I'm a licensed plumber in Illinois and after my very first set of power tools (which were a very basic set of Bosch, which surprisingly to even myself, were and still are good tools. Outdated for sure, but I still have them in my shop and pull them out from time to time to avoid running back and forth to my truck for my Milwaukee set) I "bit the bullet", financially speaking, and got myself the best set of battery tools I've ever had the pleasure of using. Milwaukee seems to be top of the line for almost every single tool that I've ever compared on the job site. I use them every single day and they are put through some extraordinary stressful use and to top it off they are also used in less than ideal environments (i.e. wet, dirty, sandy, freezing temperatures, ect.). My advise for anyone in the plumbing industry would be to go red. You are correct that typically speaking DeWalt will get the job done 90% of the time, but when you aren't able to that one time you will be extremely upset you didn't spend the extra loot. DeWalt seems to be the "Maintenance mans" brand or carpenters that work in much cleaner environments like shop work or new build scenarios, again this is only my observations. Ill never go to any other brand as long as I live. Good luck out there regardless. Stay safe and make your money. Stay blessed.
Perhaps if you bumped the dewalt up to the $150 as equivalent to the milfukyee, there would be a much more fair comparison. $50 will get quite a lot in manufacturing.
I've had a $150 Milwaukee Drill that gets daily use for the past 6 years. Never have had a single problem with it. Cannot say the same about other drills... cough dewalt cough
Marketing. They all use lithium 18650 battery cells in series. Lithium batteries have a working voltage range between 3.7 and 4.2v. One manufacturer lists ~5x the lowest voltage, the other approximates 5x the maximum voltage. Theoretically these batteries both work between about 18.5 and 21 volts in a charged vs discharged state. In the real world it's slightly less. That's why they give 18 and 20v figures. Fyi, laptops and tesla both use these 18650 cells as well. At least for now.
had to come back & show this video to my guy, he has both of those drills. he just FOUND the dewalt today in a car at his work (car auction) so i knew he'd appreciate this vid. thnx
Things sure have changed over time huh. Back in 2000 my buddy and I both bought new Hammer drills. I got the DeWalt 18 volt and he got the Milwaukee 18 volt and we did this exact test. The DeWalt spun the Milwaukee backwards and the Milwaukee started to smoke. We stopped at that point because neither of us wanted to have to fool around replacing the drill we just bought. It's just the opposite here so things have changed a lot.
i once saw such a chinese saw where the piston was split in half from the factor and was only held together by the pistonring. The sawjust refused to start, thats how the owner noticed.
As a basic handy tool, that Dewalt was a great deal got a drill 2 batteries with a full drill bit and screw heads for 60CAD on amazon. I'm not gonna be making mortar with it but it does everything else including a little bit of concrete drilling if your patient.
What is this? Pro-fighting for drills. I don’t get it, why? “Hmmm....let me attach these drills in a way they weren’t made to be used until one potentially explodes in my face.” Great idea. SMH.
How about an actual torque torture test on these drills? Put in some large fasteners, drill some large holes....? Just going chuck to chuck with these really isn't a good test because both are designed to "lock" when not turning, the reason the Milwaukee isn't hot is because it wasn't doing anything.
The theory behind the test is good and cool, see which one has more torque, the only problem with is your not actually testing that because both "lock" when not turning.
That's the Dewalt MAX. The MAX XR is the top Dewalt model right now. It's a much more compact brushless drill and it has a belt clip with a brass insert.
A good, helpful 'real world' test would include drops from a ladder, running the drill covered in sheetrock dust or dirt, leave it in the truck bed during a rainstorm and see if it works, see how many holes you can bore or screws you can drive before the battery runs out, then test how long it takes to charge the battery. Face it, your 'see which one burns out first' tests would get you kicked off a jobsite...
Person. Also what the hell is with your response about black people killing people even though Europeans were the ones who took over Africa and forced them into slavery whilst torturing and killing the ones who misbehaved. Sounds like someone needs a bit of a history lesson hmm?
In dewalts defense I’ve seen guys at work smoke em up and set outside in 15 below MN winter and ready to use in 45 minutes(roughly). I’ve gotten them hot but not smoking. I bought Milwaukee for home use and I very rarely get them as hot.
The worst thing about this comparison is the huge difference in the value of the drill. The dewalt costs about £35 as a bare tool, with the batteries etc making up the rest of the cost. The Milwaukee is worth about £70 as a bare tool, so you're looking at twice the drill. Something like a dewalt dcd796 can be bought as a kit for $150 and is one of the best compact drills on the market
@Cuckada no, it's the problem of the company who hires them,You see all the techniques, materials and technologies are the same If those companies pay more to the chinese, the chinese can still do the same high quality you wanted It's just because most products are made from china, the number of bad quality is ofc more while you dont commonly see products are made from other country. Besides, the whole world's product supply relies on china, what do you expect
This is a great "real world," test. Every morning when I get to the job-site I connect my drill to another drill and run them against each other at full power. The one that doesn't catch fire gets used that day.
Johnny5 same we usually use the one that starts on fire tho especially on the cold days
butthurt
I do exactly the same thing, but with my truck, I start one and leave the starter going until it catches on fire, 🔥🔥️🔥️🔥, then I'm sure that I need a 500 buck starter, heck I'm not going to the mechanic to get fooled. 👍
@@dimasuracalvinjake683 , The sarcasm landed 500 million miles away from you, he's not "butt hurt" he's just making a point that both tools are good and that under normal use that shit will never happen, unless you're a real brute moron, which in that case, you wouldn't get hired at a job site or any job for that matter.
No in order to get the best drill connect them which one lives gets to go on to breed with the next strongest thus creating the best drill in the world
It's funny how half of the ppl in the comments have no clue how they ended up here while the other half seem like hardcore drill enthusiasts
I'm both!
Yes, it is funny_
MyNameIsSteveYesitis lol the only correct comment here out of everything 😂😂
Well now i know that a DeWalt is worse then a Milwaukee :P
MyNameIsSteveYesitis I have no idea how I got here
When he returns the dewalt to the big box store...."I think there may be something wrong with this drill, I'm not sure what happened"
That's a 10 year old dewalt.
They’d probably say we don’t know either and re-box it up and sell it
@@aaronbuchholz4184 💯
Haha
Yes maybe yes the clutch broke t
In my experience, electricians always use Milwaukee, and framers use DeWalt.
Real talk, everyone has the brand they have because the first one they bought has the same battery as the next one you buy, hence me having a giant toolbox full of dewalt tools.
99.9% of our plumbing power tools in my shop are Milwaukee, if only Dewalt specialized in more than just drilling & cutting they would be on top, build quality & power are superior on my personal dewalt xr 20v brushless hammer/drill versus my company supplied Milwaukee Fuel hammer/drill, I dont bother with the Milwaukee drill unless my dewalt batteries need a charge lol
Fanbois use snap on
Yep and I own ridgid because of the lifetime battery replacement policy
@@Socherbal i didnt know that, thats more worth it, most of the time its not the tools, its the battery
@@odtuhan yep. It is only the new max output batteries or the batteries included in a bundle, just FYI. But as you said, it is the battery that goes bad so it makes it more than worth it to me
Considering how many times I've dropped my Milwaukee impact from 10ft+ and it still works like a champion. I'd say it worth the extra scratch
i bought an m12 combo kit with a drill and impact 8 years ago and i honestly just want them to die already so i have a reason to buy the new models. ive dropped my impact from a 3 story building onto concrete and ive left it out in the rain overnight and it just chugs along.
Makita is king
@@dandavis5767 🧢
Literally ran over a Milwaukee impact with a semi truck. Couple scratches, works fine. No issues.
This is actually a really fast and cool way to quickly injure your wrists
Thats so true it'll kick and twist your wrist
Its clear you didn't watch the video
It's also a fast way to turn your hand 360° and more
@@azn4628 it’s clear you didn’t watch to 10:17
@@airforce1393 Thats what im talking about bruh
The virgin De Walt vs The Chad Milwaukee
The Christian virgin chad ryobi
The use once black and decker
Does this void the warranty? 🤓
spoiler alert
No chads on a tool channel please
Thank you, this is what made me decide on what id want for the cordless drill id get. Got a Milwaukee for a variety of home projects and it worked great. and as a side note, i left the rechargeable battery out for about 3 weeks and plugged it back in and it still had nearly its full charge when i had to knock some holes in the wall to run some cables. Love it and it works exactly for what i needed it for, i kinda go out of my way to find reasons to use it now. Great buy, highly reccomend.
Now put dewalt flashlight vs Milwaukee flashlight starring at each other for the torture test
😆
Shouldn't be buying tool brand flashlights
Lmao
🤣
Lol🤣
10:15 was the best part "that was a terrible idea" lol
Tampatec read this comment as he did it ha
Tampatec hahaha
hahahaha i laughed smh
hahahahahaha i had to skip to that, thanks for the blooper oh man he's a cool guy tho
That hurt
UA-cam at 2am : wanna see 2 drillers fighting
Me : interesting
I have nearly every brand and price point of drill, and for the value I think Rigid makes a very solid, compact, entry level cordless drill. I personally like & use the Fuego set. DeWalts are good, but the Milwaukee vs Rigid for impacts are nearly the same apart for the trigger. The Milwaukee had a little more control and a slightly better feel. Look around at Home Depot and see what you like. Oh yeah by the way, DeWalts are smokers.
Test starts at 7:00
You're welcome.
God bless you sir!
Not all heroes wear capes!
Ya but 10:15 is where it's at
Thanks
F*cking THANK YOU!
Can't decide if Wranglestar is more informative or annoying.
All the OSHA reps trying to figure out where his next job site is.
Josh The Safety Guy he was wearing safety glasses n a respirator but he wasn’t hearing a hard hat! 6k fine
@@JoseVega-ju5sc hahaha! I forgot I changed my name to the Safety Guy!
😂
I'm gonna be productive today ☺️
*Proceeds to watch a man play with drills for 10 minutes*
I'm gonna be productive today.
Proceeds to read and respond to comments on UA-cam.
I was born and raised Dewalt for a very long time but I was given a new Milwaukee impact and was so impressed I ended up buying some of other Milwaukee tools and tried them and was very impressed I will only use Milwaukee for now on definitely makes in difference for me
Until u realise the new Dewalt impacts are way more powerful
10:17 - Me: He is going to break his hands doing that.
10:20 - almost breaks his own hand.
New Milwaukee vs decade old Dewalt too lol. Can't see the point of this test.
Gracias cumpa boooe
He is so stupid
Very
@@skeetorkiftwon they were both brushed motors bud
“That was a Terrible idea that hurt “ Lmfaoo 😭😭😭
10:17
Understatement of the year !
Now I
M not know she
Y you are too many 😱🤢😂😘
The Milwaukee has a stop relay when overloaded so it just locks when overloaded. The de Walt just keeps running and starts smoking. So this is not a good comparison.
It's a fine comparison, seeing as how Milwaukee has a feature that makes it both safer to use and more durable as a result. The DeWalt is an inadequate tool for heavier use.
I think it's a good comparison. Ones made with safety and makes it so my dumbass wont break it. Dewalt be smoking like snoop and I think that makes it trash. Yes the good one costs more but it's worth it and it's only $50. Health insurance costs more and you need that to live.
Yeah I agree and also the dewalt has a brushed motor. BTW I know I'm late to the comment section but he should have purchased at least a brushless dewalt if he's comparing the 2. There's dewalt brushless drills for right around the same price as the milwaukee drill.
@@Tonyplat98 That Milwaukee drill was brushed, not brushless....
@@dschamber7190 either way even if it was it was still a lot more expensive than the dewalt bottom of the barrel drill...
Just here to say that I love how the thumbnail was informative...
Right. Didn’t even need to watch the video
"Cause I don't wanna breathe in that toxic Chinese smoke"
Well aren't you three years too early
Edit: Imagine hating on a comment that's just a joke
was about to comment that lol
Hahaha
HA!!!
Yep i get that lol
Its CORONA TIME!!!!
TAIWAN No.1~~~
i worked for a construction company for 2 years....ive never seen a dewalt tool that broke...they normally get stolen LOL
EvendimataE 2 years.. wow you have must have seen a lot in your time in construction
I still have my 14.4V Dewalt I used when I did production Carpentry before the housing crash... Only replaced trigger one time...have had drill for 15 yrs same battery !!! Now they probably do not make them like they used to IDK....
SilentGhilly if you managed to break a dewalt drill in anyways short of blowing it up. Then you where using the drill in a way it was not meant to be used
In real life scenarios?
s m lmaoooo nice one
Something you dont wanna hear on a job site, "That was a terrible idea, that hurt". I love wranglerstar ive been watching since the beginning
I've always found low end dewalt stuff really underpowered, I've had issues driving longer structural screws, even with the impact version.
Next do Hilti vs box store brands
It would be interesting, but Hitli isn't really relevant to most people watching his videos. Hilti makes nice stuff but its mostly for large contractors not the Wranglerstar audience.
DarkRaptor99 I hear that.
Hilti has a comprable drill
+dminor214 That's not fair, Hilti is in another range and don't have a hobby line for the Milwaukee to own.
Pro line DeWalt and Hilti are pretty much equal and you can't get Milwaukee's in that class.
Milwaukee Fuel is Equal to anything Dewalt has out
A real Craftsman feels pain when somebody wasting a good tool
Crushing DeWalt isn’t wasting a good tool.
Dewalt is not worth the name 'tool'
Never hold an Bosch ?
@@BetrixHD bosch is pretty good but im a makita guy
@@lukie4ever Yeah i use Bosch and Hilti at work, but Makita at Home because its not that expensive and i like the quality.
Been mixing tons of thin set mortar with my 1/2" Milwaukee drill for over a month and it's still hanging there!
a month of use isn't going to kill anything. even a ryobi could survive that, give it a few years and you'll know how reliable it really it.
15 my dad had his 18v just kicked the bucket a couple months ago
I love watching your videos. Just a thought, you should consider keeping a record of head to head competitions of equivalent tools and making a March madness style bracket to see which is best. Each video you could move the winners forward to keep track.
The same thing is gonna happen every time
Jack always use two hands to prevent the drill to snap your wrist. Thanks for the advise dad. What does dad do.....?
He was so firm with him on that too!
James 😂
To be fair, the only way he could hold two drills with two hands each is if he had four hands.
He was firm with Jack to prevent harm and potentially a broken wrist. You can't show the importance if you say it as a side note.
I think we all say "Do as I say not as I do." at one time or another. To be fair, there's nothing about this that is proper anyhow haha. It is very interesting and entertaining none the less though. I enjoyed this video.
Similar to how I decided which of my children I would keep
xDDDDDD
Fight to the death
Survival of the fittest!
Natural selection baby
Not me. I didn't purposely leave my drills in a shopping cart unattended, hoping they'd be taken...
8:15 thought I was getting a hearing test for work 🤣🤣🤣
It’s funny how every trade leans towards a different brand. Where I’m located, framers DEWALT, Tin knockers Makita, Pipefitters Milwaukee, Sparky’s are all over the place haha
Us multi trades use milwaukee
When you wanna do everything your a fool not to have red in your hand.
Sparky is sparky, sparky do what sparky do
There is a difference in doing timber framing and screwing lids on to connectionboxes, and everything inbetween.
The sparky I know carries two, one for hanging cable ladders, and a small one one for everything else
I don’t think this DeWalt is an actual one that framers use.
I don't think it's an apples-to-apples comparison. $150 will buy a brushless Dewalt drill, which includes a better chuck (more in line with what the Milwaukee uses). I'd be interested in seeing a comparison of those two. In short, if you're going to set the price bar at $150, then there is a better Dewalt drill to be compared.
Steve
stuff no
Steve, you're going to have to be a bit more enlightening than that.
stuff I wouldn't agree, dewalt can just as easily charge just as much as the Milwaukee and add the nicer features. These are both of there cheapest lithium ion drills. There both the lowest end drills you can get from the either company. I think it's a fair comparison. What I don't think would be fair is if you went the next tear up on the dewalt and still used the bottom of the line Milwaukee.
Alec Ver Bunker, in the real world, price versus performance should be the consideration, i.e. value. I'm simply suggesting that if you take the Dewalt (or any other brand) that most closely aligns with the Milwaukee price, then Dewalt may indeed give more bang for the buck. On the other hand, it may smoke too.
Don't care. Dewalt is garbage.
Loved this test. Very useful for when I want to drill my drill with another drill. Something I do very often on site. I must have gone through at least 100 drills so far drilling my contracting mates's drills. I now know what brand to go for, thank you!
Quentin Dallaserra 😂
😂
😂
Quentin Dallaserra 😂
Quentin Dallaserra x njjiuu7777iiub jnhh99ojnjuf
not bias at all!
1. He was screwed over by a dewalt sponsorship a couple years ago.
2. That's an entry level BRUSHED Dewalt vs a BRUSHLESS not entry level Milwaukee.
Not even close to a fair test.
That milwaukee drill is brushed
Its brushed not brushless
Yea I like dewalt better anyway I take good care of my tools I do not use them hard
@@hunter7476 I got milwaukee tools I abuse them amd they run great I got the fuel tools not the normal brushed ones
The Milwaukee actually have a disadvantage. The dewalt has 2 more volts and more volts mean more power.
6:43 Well now we're all breathing that toxic Chinese smoke
The Dewalt 20V Max XR would probably be a more appropriate comparison. It is more compact and has an aluminum _core_ like the Milwaukee.
they are both the cheapest serie that you can buy from both brand...
More like black and decker dewalt now
Not to mention that the DeWalt has enough torque to mess itself up,
@@tilvalhalla9343 what do you mean now?
it has been black and decker sense 1960
If he was gonna do that hed have to get the Milwaukee fuel... peg the best against the best from each lol
7:00 you're welcome :)
ouzerX thank you!!
Thanks
Thank you
Idk if anyone else noticed, but I appreciate your awkward squat stance all for the sake of good head room. 😂
I used to work in construction dealing with a lot of concrete work and sometimes redo a lot of concrete with metal framing. Dewalt works pretty good is decent but doesn't last long. I switch to milwaukee because i got a deal on home depot and last me years was suprised how much it held up and battery life was great.
I have had a lot of experience with both lines of these tools. Went a lot of years with Milwaukee and after about 1 1/2 years all the Milwaukee's were going down hill so i decided to try the cheaper De Walt. Very similar service up to the 6 month period but after that it was down hill pretty quick. We normally had our tools repaired at Home Depot but the big difference was the time it took to get them repaired. The De Walt had to go back to the factory. I think either would be good for the average do-it yourselfer but in a commercial setting the Milwaukee wins out.
I enjoy your videos and they spark a lot of ideas for me, keep up the good work.
David Puls Just get Makita
"I see no downside to the safety glasses"
Wiser words have never been spoken.
Downside 1.
You look like a nerdddd
Downside 2.
Vision is for losers
Downside 3.
Eye injuries make you look distinguished
So this is like buying a “like new, low miles. I know what I have. No low ball offers.” car on Craigslist.😂
and that is how you successfully destroy $300 dollars in drills 😂
Hey Cody, love your videos always. But for these, it would be great to see you actually test them with real world tests first. Don't get me wrong, I LOVE seeing these get destroyed, but actually knowing which one can be the better drill in everyday use is the only important take away. Thanks and God Bless you!
Matt Endres probably both good for everyday just you know which will last longest...
Everyday use? What that isn't what a drill is for? Well damn, I always wondered why they didn't sell them in pairs since two were always needed.
Love to see a video like this featuring Harbor Freights new cordless drills
Which is better of the two is kind of subjective. They're both great drills
10:14 lmao. i was quickly skipping ahead,but had to wait, because we all new what was about to happen
I'm happy with my Milwaukee power tools. I have the cordless circular saw that I really like. All brushless.
My dad uses a Milwaukee for like 10years and it failed once, it was a minor issue and he repaired it himself. Milwaukee is great value.
i've had my Dewalt for 13 years, never had an issue
When I grow up, I want to battle drills 🙂
mosesgarcia21 lmao
Half of the people wondering, how they got here. So I‘m sitting here and wonder how I got twice here.
You ain't wrong, I'm a gaming channel and I'm trying to figure out how I ended up here.
@@GamersHaven - Same.
Same here
I find it best not to ask questions. UA-cam demands that you be here.
fiv3esixX yeah
Try the DeWalt DCD791. That is DeWalt's high-end drill. The DeWalt used is an "economy" version.
I emailed Milwaukee when I got my drill and they sent me a clip for free.
why don't they just include it?
When two of the smartest kids in the class get different answers
That is how the best inventions and enterprises ever on human history started. The wright brothers, Henry Ford, and Nicola Tesla had this kind of accidents, they were misunderstood and then they changed the world. People with no fear of failure and the will to do inventions and not afraid of others opinions
11:35 when I start up my car
Nick Husz what is it a lawnmower
LMFAOOOO
Bruh, rofl!
15 years ago I bought a Milwaukee 2601-20 and it worked like a champ. I added the M105.0 5AMP HOUR battery when it became available and this created a monster of a tool. It is actually a little too much battery for this drill as you could overheat the drill if not careful Despite quite a lot of abuse, it still works like a champ to this day. I recently added a hammer drill, the Milwaukee 2804-20. They claim better technology, including limiting circuits to protect the drill. Sure enough, the drill will cut out on me before it is allowed to heat up and the end effect is that it is actually less powerful than the old drill. I reserve it for the hammer drill function which is a must when drilling into concrete. I have no reason to even consider another brand. That being said, regarding DeWalt, My dad bought a DeWalt radial arm saw back in 1964 for building boats, and it is still in service today in my garage. This is long after similar craftsman saws have rusted away.
I don’t know if you can really say they rusted away as a form of how good the tool is being that a radial arm saw rusting out is really more of a user error then how good the tool is.
Always better to be safe than sorry. Major respect.
No idea why I watched this when I don’t even need a drill
Peej ha ha ha
Lol
I doubt anyone watched this because they "need a drill".
Same lol
Probably because destruction is cool!
As a dewalt customer I can smell this video
Your tools are toasted.
I smelled the comment when I read it
Why are you comparing the entry level Dewalt drill to a better Milwaukee drill ?
I think you should have chosen drills to be closer spec wise.
I definitely agree, at this low level price point the 50 bucks is gonna make the drill wayyyyyy better
Excuses excuses
It's not always about power alone, reliability and durability matter for me a lot more. This is why I went with a Makita. Regardless, you can't go wrong with any of these
Makita is absolute made in China trash.
I've been to a couple of construction industry shows, and without fail dewalt and milwaukee both have booths to show off and compare their tools, the newest generation of brushless lithium ion tools from both companies are pretty good, but milwaukee's tools always outlast in the torture and power tests, as my portercable and dewalt tools slowly die out I've been slowly converting over to the milwaukee fuel system and I love it. As a side note, you might want to double check the box, because milwaukee usually ships belt clips for their drills packaged with the instruction manual.
Porter cable is Low end homeowner grade now. Better than Harbor freight but not much. Used to be a good brand but not anymore.
I was all Dewalt until a few years ago. My dewalts were dying, so I decided to give Milwaukee a try. I use these tools heavily, daily as a handyman. I would NEVER go back. Milwaukee is a far better tool. Might be more expensive, but when they earn your living, quality is far more important than initial price. I currently have 3 sets of drivers, sawzall, 7 1/4 circular saw, and some of the little sawzalls for cutting out sheetrock. I have no complaints except that occasionally I have to double pull the trigger on the impacts to get them to drive at full power.
Uncle Bumblefuck wasn't wrong
Penta not at all uncle bumblefuck rules
He sure wasn't. One hit off that sweet corporate teat....
that corporate moo juice clearly gets his shmoo flowing.
I'm proudly the 100th t/u to affirm that as TRUTH.
Bumblefuck for the win! Keep the BOLTR alive!
The Dewalt dcd771 is not brushless. The Milwaukee is. Should have used a Dewalt dcd 790 or 791.
I learned a lot from this video! I can save $50 buying a Dewalt and if I don't attach another drill to it, it will last more than 15 minutes! - Love the dewalt 20v impact driver - don't even use a drill much anymore!
Lol true, however, depending on your trade, skill level, length of jobs, access to working outlets, ect. the Milwaukee (IMO) is indeed the superior drill, impactor, Sawzall, hackzall, angle drill, and most anything else that they both make. I'm a licensed plumber in Illinois and after my very first set of power tools (which were a very basic set of Bosch, which surprisingly to even myself, were and still are good tools. Outdated for sure, but I still have them in my shop and pull them out from time to time to avoid running back and forth to my truck for my Milwaukee set) I "bit the bullet", financially speaking, and got myself the best set of battery tools I've ever had the pleasure of using. Milwaukee seems to be top of the line for almost every single tool that I've ever compared on the job site. I use them every single day and they are put through some extraordinary stressful use and to top it off they are also used in less than ideal environments (i.e. wet, dirty, sandy, freezing temperatures, ect.). My advise for anyone in the plumbing industry would be to go red. You are correct that typically speaking DeWalt will get the job done 90% of the time, but when you aren't able to that one time you will be extremely upset you didn't spend the extra loot. DeWalt seems to be the "Maintenance mans" brand or carpenters that work in much cleaner environments like shop work or new build scenarios, again this is only my observations. Ill never go to any other brand as long as I live. Good luck out there regardless. Stay safe and make your money. Stay blessed.
Perhaps if you bumped the dewalt up to the $150 as equivalent to the milfukyee, there would be a much more fair comparison. $50 will get quite a lot in manufacturing.
I thought it was Willfuckthee
milsucky
wilfuckye
They are both great drills in my opinion, I use both for our farming and find Dewalts last a lot longer in dusty conditions
I've had a $150 Milwaukee Drill that gets daily use for the past 6 years. Never have had a single problem with it. Cannot say the same about other drills... cough dewalt cough
My Milwaukee brushless Fuel made me a firm believer. Outstanding drill
Would love to see Milwaukee vs Porter Cable. I have a Porter Cable set, and am thinking of upgrading to Milwaukee
The comment section is the best part about being subscribed to this channel. Comedy Gold.
8:22
Dewalt: I GIVE UP, STOP PLEASE.
Milwaukee: HAHAHAHAHAHAHA😈😈😈😈
Sureshot274 lol
For what it's worth, this is a far cry from DeWalt's toughest drill.
Sureshot274 I
Will Schmucker plus there are about 3 settings in the Dewalt
Sureshot274 boooo
10:15 😂🤣
Sorry man, no pain no gain 😭💯
I love the idea of this test but it was unfair as the Milwaukee is 50% more expensive. I’d rather see it vs a $150 Dewalt
But dewalt is 20 vs. Milwaukee 18. So scales evened out.
@@lukuscarter3563 there is really no difference
@@lukuscarter3563 smh...
I agree, i dont know anyone that buys that type of dewalt drill. I usually have an impact or a hammer drill. Those drills are worthless
Marketing. They all use lithium 18650 battery cells in series. Lithium batteries have a working voltage range between 3.7 and 4.2v. One manufacturer lists ~5x the lowest voltage, the other approximates 5x the maximum voltage. Theoretically these batteries both work between about 18.5 and 21 volts in a charged vs discharged state. In the real world it's slightly less. That's why they give 18 and 20v figures. Fyi, laptops and tesla both use these 18650 cells as well. At least for now.
I have the dewalt drill and once it made smoke when I installed screws in the ceiling, I thought it had burned but it still works wonderfully.
Nice particulate filter. Try an organic(vapor proof) one if you want it to actually work.
I like how he is talking whilst in a super wide powerstance at 12:30
Tf is a whilst, just say while...it’s 2021 not the mid evil times
@@isaiahcamarillo3258 lmao 😭
@@isaiahcamarillo3258 whomst art thou talking to for it surely isn’t me
had to come back & show this video to my guy, he has both of those drills. he just FOUND the dewalt today in a car at his work (car auction) so i knew he'd appreciate this vid. thnx
Basically this is as relevant as the Ford, GM, Dodge truck debate... who cares what one is better. They all do the intended job very similarly.
Why is everyone hating on this guy, saying it’s not a real world test? Making them arm wrestle is the best way to see which is stronger.
I saw you had no comments so here you are 1 comment.🙂
Here’s another
Ok, who's the "you guys" that asked for this? I just wanna talk I swear
I found your comment here now .. wanna tell u something ...
Have a wonderful day 💐
@@hayesjohnson2027 so what ?? It's just greetings . 😉
@@hayesjohnson2027 wtf a goblin
AKIL M if this was twitch I’d weirdchamp you
@@akilm9478 p
Things sure have changed over time huh. Back in 2000 my buddy and I both bought new Hammer drills. I got the DeWalt 18 volt and he got the Milwaukee 18 volt and we did this exact test. The DeWalt spun the Milwaukee backwards and the Milwaukee started to smoke. We stopped at that point because neither of us wanted to have to fool around replacing the drill we just bought. It's just the opposite here so things have changed a lot.
Awesome way to test drills, very clever!
You should do a test on cheap Amazon chainsaws, like one of the $100 Chinese ones
Try 2 chainsaws and then clash the bars together while running. Wait. No that's a terrible idea.
... those are mankillers lol
I have an Earthquake 14" bar. It was around $90-100. Menards special.
Yes
i once saw such a chinese saw where the piston was split in half from the factor and was only held together by the pistonring. The sawjust refused to start, thats how the owner noticed.
7:20 to save you time but if you really want to save time go to 15:00
Zodiak34 15:00 helped me a lot! Thanks
no problem. Feel free to reply if you want more time saving services.
You sir are a hero among men.
As a basic handy tool, that Dewalt was a great deal got a drill 2 batteries with a full drill bit and screw heads for 60CAD on amazon. I'm not gonna be making mortar with it but it does everything else including a little bit of concrete drilling if your patient.
Lmao this dude is the modern day Fire Marshall Bill…. “Let me show you something”!!!!
7:18
You’re welcome
JamieCalrissian I was looking for your coment
You're doing God's work..
Thanks
JamieCalrissian somebody give this man a beer please.
If i was a girl I'd be straight for you but im a dude and happy to be so all i can say is thank you
Mashes two great drills: "something ain't right here"
If only Phil swift saw this
“NOW THATS ALOT OF DAMAGE”
What is this? Pro-fighting for drills. I don’t get it, why? “Hmmm....let me attach these drills in a way they weren’t made to be used until one potentially explodes in my face.” Great idea. SMH.
This comment section is hilarious. Thank you for making me laugh out loud in my room, folks.
How about an actual torque torture test on these drills? Put in some large fasteners, drill some large holes....? Just going chuck to chuck with these really isn't a good test because both are designed to "lock" when not turning, the reason the Milwaukee isn't hot is because it wasn't doing anything.
Duct tape the vents , grab a 3 inch hole saw ,and try cutting through 6 inches of steel
Idon;t think he is serious with these tests or at least I hope he isn't.
I definitely won't duct tape the vents, that would not be a "real" world test.
Nothing he does is real world lmao.
The theory behind the test is good and cool, see which one has more torque, the only problem with is your not actually testing that because both "lock" when not turning.
I've been thinking about buying a cordless. I've made my decision. Thanks. Great test.
That's the Dewalt MAX. The MAX XR is the top Dewalt model right now. It's a much more compact brushless drill and it has a belt clip with a brass insert.
A good, helpful 'real world' test would include drops from a ladder, running the drill covered in sheetrock dust or dirt, leave it in the truck bed during a rainstorm and see if it works, see how many holes you can bore or screws you can drive before the battery runs out, then test how long it takes to charge the battery. Face it, your 'see which one burns out first' tests would get you kicked off a jobsite...
There are dozens of normal reviews already.
True. I've abused both DeWalt and Milwaukee. 1 year from the DeWalt and 5 years and counting for the Milwaukee.
Person. Your English is a disgrace just as you're a disgrace to the English race. Your family tree, is actually a spider web.
Person. commas*
Also how about both of you quit criticizing each other's English before yours is correct.
Person. Also what the hell is with your response about black people killing people even though Europeans were the ones who took over Africa and forced them into slavery whilst torturing and killing the ones who misbehaved.
Sounds like someone needs a bit of a history lesson hmm?
Now do $700 drill vs roll of flex tape.
Hahaha
Line x
Well, Thats a Lot of damage
If you use enough, flex tape will always win
In dewalts defense I’ve seen guys at work smoke em up and set outside in 15 below MN winter and ready to use in 45 minutes(roughly). I’ve gotten them hot but not smoking. I bought Milwaukee for home use and I very rarely get them as hot.
The no glasses thing really threw me for a loop. I was like who is this imposter 🤨
The worst thing about this comparison is the huge difference in the value of the drill. The dewalt costs about £35 as a bare tool, with the batteries etc making up the rest of the cost. The Milwaukee is worth about £70 as a bare tool, so you're looking at twice the drill.
Something like a dewalt dcd796 can be bought as a kit for $150 and is one of the best compact drills on the market
jamdoginc and that 796 would have been a much more appropriate comparison.
I'm also fairly sure that's a brushless Milwaukee
It's been a while since I see this comment and let me remind you that these are both brushed
“I don’t wanna breathe in that toxic Chinese smoke” 😭😭
That's inaccurate and racist
If that driller is made by usa, pretty sure he is not going to change it to “I dont wanna breathe in the american smoke”
JM 9 ok ❄️
Obviously a premonition of coronavirus
@Cuckada no, it's the problem of the company who hires them,You see all the techniques, materials and technologies are the same
If those companies pay more to the chinese, the chinese can still do the same high quality you wanted
It's just because most products are made from china, the number of bad quality is ofc more while you dont commonly see products are made from other country.
Besides, the whole world's product supply relies on china, what do you expect
Hello Freedumb lmao how is that racist
All my power tools are Milwaukee except for a Dewalt job site table saw. I have no complaints.
12:36 You can see from the legs position that this man is a good Kung fu or Karate practitioner XDDDDDD
Sorry bud but that's also a horse riders stance a lumber jacks stance and a carpenters stance so he might not