Це відео не доступне.
Перепрошуємо.
Hammer Filing Basics on a Steinway L action
Вставка
- Опубліковано 18 сер 2024
- These videos were created to give my sister-in-law a peek at some of the processes I employ to rebuild a Steinway piano keyboard and hammer action. They are casual videos I shot in my basement wood shop, using methods and techniques that I have learned in my 40 years as a piano technician specializing in Steinway restoration.
Thanks man. yours is the third video I've watched of people reshaping hammers and this is by far the best/fastest technique. I will be doing this.
I've never used this method myself - nor have I ever seen this done in this this way before. Moreover, my copy of the piano tuner's 'bible' - Reblitz - makes no mention of this either. I guess I'd have to try it for myself in order to see if it actually works. My own method is as described by Arthur Reblitz, using a hand-held sanding block.
I should add that I have 46 years' experience working as a piano tuner/technician.
Thanks! Great Video. I sneezed all the way through it just watching that felt dust!
Usually, I wear a dust mask, and I do highly recommend that. I wasn't wearing one for this video because I was talking for the camera. But a mask is important because wool fibers can cause respiratory distress. I am allergic to wool, so it goes without saying that I use a dust mask. My hands still suffer from cracked skin, though.
For grits of paper, I use four grits of wet-or-dry paper: 220, 150, 400, and 600. (Of course, I don't use the paper wet.) This is for current vintage Steinway hammers (2017). Steinway hammers in the 1990's were in transition from the type with the gray shoulder dye to the clear white felt we now have. These hammers were not quite as dense as today's hammer and could be filed with coarser grit, like 150, and even 80 or 60, depending upon the amount you wanted to pull off. For all hammers pre-1984, with gray dye on the shoulders, I usually started with a 60 grit and progressed up to 220. These were the exceptionally light hammers (2 grams lighter on average) Steinway used to make all the way back to the early 1900's.
Hi Robert, thank you so much for your information on the history of the steinway hammers. Do you happen to know if steinway factories (Hamburg and New York) used similar hammers pre-1970?
Many thanks teacher.
Thank you for showing this.
I belive, Steinway T-short may help to make good job!
thanks...worked out great. Not sure why the RPT's scare people from doing this; although, it does take skill
Hi. What grit and type of paper are you using? What number paper for the final smooth file?
Hello Robert, thanks for your video. I am looking for information which I cannot find in any books or videos I have been watching, so I'm seeking your advice please. I am rebuilding a 6' Bechstein Grand. I had a company replace all the hammers and glued new shanks. Now that these hammer/shank assembly have been reinstalled, I need to check the travel of each hammer to the strings. Before doing this, should the hammers be vertical to the strng, then set the travel or is it more important to make sure that the hammers strike the string at 90 degrees?
I have set the hammer AO vertical, but when lifting to the string, there is side travel. Before setting this hammer vertically, there was less side travel. This confuses me.
Where do I start...?
Thanks for your help
I travel hammer shanks before I glue on the hammers, but I understand that you had new hammers and shanks sent to you pre-assembled. In the case that I received hammers and shanks pre-assembled, I install them on the action frame and travel them right away. After traveling, I check for hammers that aren't vertical and use a heat gun (or alcohol lamp) to "burn" the offenders vertical again. This is an important step before filing, because if a hammer or hammers aren't perfectly vertical before you begin filing, then you're going to get a skewed strike surface. When it comes to hammers that are angled, I file them one at a time with narrow strips of sandpaper. I didn't show this in this particular video because it was only a casual video demo intended for my sister-in-law. The process is much the same during single hammer filing. Somewhere in my videos I have on on traveling.
Thanks Robert, much appreciated
Nice video. What sandpaper grits do you use?
Hello Robert, Nice Videos, thank you! I would like to know if you have any experience with Schimmel Konzert Piano Hammers I need to know if the hammers on those pianos are designed to be juiced for tone building
Hello Fernando,
I have never worked with the hammers you mention. However, if they are anything similar to the Renner hammers used on Bösendorfer, they can be juiced. The techs at Bösendorfer in Wiener Neustadt (the factory) use a concentration of 8:1 lacquer on their hammers as needed. That can give the hammers a tonal boost. If I were advising you, I might suggest you try that concentration first. If it doesn't have the desired effect, then try something like 5:1. Mind you, we're talking about thinner:lacquer. I can't recall whether they used acetone to cut the lacquer at Bösendorfer. It probably is lacquer thinner, and the lacquer is nitrocellulose wood lacquer. Personally, I prefer to use acetone to cut my lacquer. (This gives me the idea that I ought to do a short video on lacquering Steinway hammers...something for me to think about...)
Robert Grijalva thank you very much Robert!!
I appreciate your kind reply and will follow your advice. I will check alignment and strike points first and will also try your shaping technique as well.
Isn't backside felt filing in upward motion instead of filing downward?
The direction of filing any hammer is a matter of the nap of the felt. Some hammers file better in one direction, as I do in this video. However, filing upward works less well on contemporary NY Steinway hammers. In 1984, Steinway reformulated their hammers and went away from the super-soft grey-edged hammers. The grey-edged hammers responded better to the two-sided technique. Current hammers, which have been refined and steadily improved in the last 20 years, seem to have a shorter, and more dense felt that requires filing in one direction with straps rather than paddles. In my experience, the one-direction strapping produces a finer appearance, as with these in the video. Thanks for your question!
Robert Grijalva Thanks Bob for detailed answer. I appreciate all your informative videos.
Hi Robert my piano cant make repeated notes that well, Is there a way to make piano make repeated notes better?
I assume you are speaking of a grand piano action that doesn't repeat well. There are a number of reasons that a grand piano may not repeat well. First and foremost is whether or not the piano is in good mechanical regulation. Assuming you believe that it is in reasonable regulation, then there are three different things I would prioritize to investigate. First is springs. Are your repetition springs adjusted so that they give a nice "salute" when you release pressure on the key after the hammer is checked? Mind you, the salute cannot be so fast that it kicks the key under your finger, but you want it to be as fast as it can be without kicking back on your finger. Second, backcheck height. The higher your backcheck height is, the faster your repetition spring can be adjusted to. This is because as you decrease the distance between the backcheck height and the drop height of the hammer, the hammer travels a shorter distance when pressure is released, and it reduces the possibility of a severe kickback. The third thing to check (and perhaps the foremost item) is the pinning of the hammer shank center, as well as the pinning of the repetition lever. The hammer shank center should produce an amount of friction that results in between 7 and 9 swings of the hammer when you suspend the shank in your hand by holding the hammer flange in your fingers and the hammer at horizontal and letting go. (I have a different video on hammer shank pinning in my channel. You should check it out.). The repetition lever, on the other hand, should have between 5 and 7 grams of friction. This enables the wippen to support the hammer shank when depressing the key, as well as to prevent "submarining" of the hammer shank knuckle once the note is struck and the hammer rebounds. A higher friction at the rep lever allows you to regulate the spring at a higher tension as well, giving you really fast repetition.
@@robertgrijalva7158 Actually it is a console piano
@@emilioooo9678 If you have a console (a type of shorter vertical upright piano), there is little you can do aside from providing a very good action regulation. The upright action is not a "double" escapement action. It does not possess either a repetition spring or repetition lever, two essential components found on grand piano actions. It means that in order to repeat a note, it is necessary to allow the key to return all the way to its original position before you can replay the note. In the grand piano action, it is necessary to only release a little finger pressure after the note is depressed in order to repeat a note. This is the genius of the "double" escapement action that was developed by Erard in the 1820's. The Erard design is the one used by virtually all piano manufactures today. Its defining feature is the butterfly or reciprocal repetition spring that when regulated adjusts the tension for both the repetition lever and the jack in proportional measure.
@@robertgrijalva7158 Oh wow I didnt know that, Im asking all these questions because Im 18 and I want to become a piano technician, I have another question so I have been learning about tuning and I think Im ready for tuning a piano but what I dont understand at all is pitch raise, Could you explain to me how to understand pitch raises and how are they performed on a piano?
@@emilioooo9678 What you are asking for is a tutorial that would not be doable in this context. You need to work one-on-one with a qualified piano technician willing to act as your mentor. I can't explain tuning to you through these little discourses on UA-cam. I'm sorry to disappoint you.
Hi Robert can that technique be used on an upright with the action out of course?
I don't see why not, as long as you provide the proper support to the hammers, and you can get clear of the dampers.
I used some flat sanding sponges from Japan and they work quite well for uprights.
I tried one direction sanding on my Abel naturals, but in the treble, the felt at the back became really fuzzy. I tried sanding upwards to get rid of the fuzz, which did flatten down some of it, but then there was a ‘line’ of fuzz near the crown which cannot be removed... 🤔 I am puzzled
I apologize that I haven't replied sooner. Regarding your Abels; they are of a different construction than a New York Steinway hammer. They are more similar to the Hamburg hammer, which is made by Renner. In this case, you did the right thing to fill upwards on the rear side of the hammers. Some hammers do file better like that, and you simply meet at or near the crown to get the front and back "layers" aligned. The fuzz that resulted during your Abel filing may also have been caused by using too coarse a grit on them. I have found that with European hammers, using the finer grits is best. Instead of starting with something like a 150, I start instead with 250, then progress to 400 and 600. I may even start just with the 400, depending upon the amount of hammer wear. Of course, all this is generalized info. You have to experiment a bit to find the best combo of grits and technique to file the hammers you have at hand. Best of luck!
@@robertgrijalva7158 Thank you!
Like most UK and European tuner/technicians, I always use Abel Natural Felt hammers whenever installing new hammers on a piano - they have become the industry standard on this side of the Atlantic. Thus far, I have had no need to reshape them, given that most piano owners do not practice for 7 or 8 hours per day for 6 days per week, and therefore they are not yet worn down..!
As per my comment of this video, I myself have never even seen this method of reshaping hammer felts, and there is no mention made of it in Reblitz.
I may try this method at some point, but there's no way I'd experiment on a customer's piano. I've been a tuner/technician for 46 years, and I err on the side of caution...