Best Video On How To Install Glass Tile Backsplash!
Вставка
- Опубліковано 12 лип 2024
- SUBSCRIBE - To see the Full Remodel - Coming Soon !!!
Are you tired of your plain and boring kitchen walls? A glass tile backsplash is a perfect solution to add a touch of elegance and style to your kitchen. In this video, we'll guide you step-by-step through the process of installing a glass tile backsplash in your kitchen. We'll cover everything from choosing the right tiles and materials to preparing the wall surface and cutting the tiles. Our easy-to-follow instructions and tips will help you achieve a professional-looking finish. With our DIY tutorial, you can save money and create a stunning kitchen backsplash that will last for years to come. Don't miss this opportunity to upgrade your kitchen with our glass tile backsplash installation tutorial.
Helpful Mentioned Videos:
Over the Counter LED Light Installation - • Kitchen LED Lights: FA...
How To Replace & Extend 3-Way Switch Over Tile Backsplash
• How To Fix Sunken Outl...
Kitchen Makeover: Start to Finish - PLAYLIST
• Kitchen Makeover: Step...
Tools Used - Thank you for choosing to use the links below to support the channel
Tile Layout:
🛠️ 25FT Tape Measure - amzn.to/44bYYFC
🛠️ Multi-Surface Painter’s Tape - amzn.to/46vxxbY
🛠️ Premium Utility Knife - amzn.to/3XlGUXg
🛠️ Laser Level - amzn.to/3CFZH6m
🛠️ 24-Inch Level - amzn.to/3CHMnOX
🛠️ 20V Impact Driver - amzn.to/42UJJji
Mud Prep:
🛠️ 20V Hammer Drill - amzn.to/42UJJji
🛠️ Paint and Mud Mixer - amzn.to/3JpEjWE
Tile Cutting:
🛠️ 7-inch Wet Tile Saw - amzn.to/3Nmk1P8
🛠️ 7-Inch Continuous Rim Glass Tile Diamond Blade - amzn.to/3JsV9UI
🛠️ Goldblatt 2 Piece Glass Tile Nippers Set - amzn.to/43Wd91M
🛠️ Automatic Pencil - amzn.to/3CK1pnd
🛠️ 7 Inch Speed Square - amzn.to/46mK7tP
Tile Install:
🛠️ QEP Tile Leveling System Part A-Flat Clips - amzn.to/3qXoqAn
🛠️ V Notch Tile Trowel - amzn.to/3PzJYgL
🛠️ 1/8-inch Notch Trowel - amzn.to/3pqvu8d
🛠️ 1/16-inch Wide Tile Spacers - amzn.to/44nwxEG
Tile Grouting:
🛠️ Grouting Super Sponge - amzn.to/3NoHD5p
🛠️ Molded Rubber Grout Float - amzn.to/3CGX7Nt
#DIYwithMAX, #kitchenbacksplash, #kitchenrenovation, #homedecor #interiordesign, #kitchenupgrade, #kitchendesign, #tiling, #tilework
Chapters:
0:00 - Introduction
0:24 - Preparing the kitchen walls
0:41 - Choosing the right adhesive
1:06 - Applying the adhesive
1:26 - Placing the glass tiles
1:43 - Using tile spacers
2:55 - Trim out sides of glass tile
3:37 - Cutting tiles for outlets
4:44 - Cutting the glass tiles
5:49 - Switching sides for layout
6:42 - Cleaning and checking grout lines
8:25 - Installing tiles behind the stove
9:58 - Preventing tile cracking
10:38 - Choosing the right grout
11:13 - Applying the grout & Cleaning the tiles
11:48 - Final result and maintenance tips - Навчання та стиль
Great video, would appreciate a regular-speed clip showing the grout application next time you do tile to understand the 45 deg angle technique.
Thank you for the suggestion. The 45° angle technique would be similar to you swiping at a Fly but at a 45° angle to the grout lines. I hope that helps.
Beautiful tiles, looking modern👏👏👏
Thank you very much.
Always very informative!
Thank you very much for your comments.
Very helpful, thanks!
Thank you for taking the time to leave comment and subscribing. Hit the like 👍 button to recommend the video to more folks looking for this info. Please let me know if you have any questions or if I can help in any way with your project.
Thank you. Great video!
Thank you I’m glad you found it helpful. Please hit the like 👍 button so it gets recommended to more folks like you looking for this information.
Enjoyed your video, thanks
I appreciate you taking the time leaving the comment. If you found it helpful please hit the like 👍 button so it gets recommended to more folks like you looking for this information. Please let me know if I can help in any way with your projects in the future. Welcome to the community and I look forward to your future comments
Very through explanation. Thanks😊
I appreciate that. I tried to make sure I cover all the info I used to do this job my self. Please pay it forward by hitting the like 👍 button on the video so it gets recommended to more folks like you looking for this information.
Beautiful job.
Thank you very much. Please hit the like 👍 button on the video to help other folks like you find this information.
Great video
Thank you very much. Please pay it forward by hitting the like 👍 button on the video so it gets recommended to more folks like you looking for this information.
looks good
Thank you
Nice job 👍🏼 Did you have any cracking after a few months?
@AvBros37 thank you very much your awesome. Luckily no crackling at all anywhere. The trick of this project is to make the wall as flat as possible, use the correct glass tile mud and do caulk in the seams of the counter the sides and the corners and the tile should not crack on you.
Do you use a sealer on glass tile
Thank you for the question we did not. The non sanded grout is not very porous so it does not absorb stuff like regular grout. But we do make a point to regularly wipe down the tile with water with few drops of dish soap and it has been holding up really well.
Just curious, why dont you use those leveling clips? Are the tiles too small? Or did you make sure the wall was completely flat so that you didn’t need levelers?
Awesome question. Thank you for asking. Originally we wanted to use the leveling clips like we did on the floor. But after doing my research and speaking to few folks that do this for a living they recommended for glass tile like ours less grout is better as there will be less contraction and expansion which could cause the tiles to crack in the future. Not 100% sure how accurate this is but I did now want to take a chance on screwing up a backsplash in my mother-in-law‘s kitchen. So we did the best we could with leveling the wall and used mud specifically designed for glass tile sparingly. This was my second tile job ever. The first one was the floor tile not sure if you saw that video. By this was my first backsplash and my first time tiling without the leveling system which I’m a huge fan of. It was nerve racking in the beginning but after the first few rows it was not so bad and we did really good job making the wall level so the tiles laid down nice and flat. I hope this answers your question. Please let me know if you think of anything else I’m always happy to help. Please pay it forward by hitting like 👍 button on the video so it gets recommended to more folks like you looking for this information.
how do you install glass tiles that are not straight
Thank you so much for reaching out. I love when you guys ask questions. I’m not quite sure what you mean by your question can you elaborate a bit more. Or email me the picture of the tile at DIYwithMAX@gmail.com so I can better understand what you mean by not straight.
Attention to detail 😂 your pattern definitely shows that...
Thanks for noticing. Had to do that to have the best look in the corner where the eye is drawn. Plus it’s berally noticeable to an untrained eye 😂.
@@DIYwithMAX I've been a tile setter for 18 years. Your layout was poorly done. Next time dry lay all your tile on the floor and mark boxes and corner on your tape and transfer the measurements to the dry lay. It will tell you everything you need to know about exactly where to start. Pattern break sticks out like a sore thumb.
@douglaslanglois1043 thank you for taking the time to share that helpful tip. I’m an IT guy by trade so still have lots to learn about laying tile especially from someone with your years of experience. Any advice is greatly appreciated. It not only helps me but also all the folks trying to figure this out for them selfs. I look forward to your future comments and feedback.
While I have you here what are your thoughts on the special mud for glass tile I got? Is it worth the money or will regular mud work just as well?
@@DIYwithMAX you absolutely should use a thin set that is formulated for glass tile.
Your spacing is off.
Good eye. Yeah we had to do that to have good fit around the outlets and for the corner to look good with out very thin slivers but it don’t bother us. Most people don’t even notice.