Hello and thank you for your VERY INFORMATIVE videos. If you call support, they will tell you to put the machine in "Quiet Mode" which basically just slows the machine and keeps the arm that the spring holds down from bouncing. I would like to add that another POSSIBLE cause for the error that you are addressing is a dirty lens where the arm drops down and breaks the lens contact. I discovered this after fixing the spring as per your video. I continued getting the 4211 error. This printer had a toner leak and it got all through out the machine. I simply cleaned the toner film off the ejector sensor and the printer started functioning normal.
Can someone please point out where the lens is. Or where is the ejector sensor I have to clean. I keep getting a paper jam even after streching the spring. Thanks
Thank you for your video. Unfortunately, fixing the spring didn't solve the problem for me. I bought a new Fuser-Kit and changed it, but I'm still getting errorcode 6600. Hotline told me, maybe there is a defect sensor. Do you have an idea how to fix the 6600-error (new Fuserkit installed!)?
How would you know that the issue is the exit sensor spring and not something else that is the problem? as usually all my P2040dn paperjams probems were solved with replacing the fuser heat towel and oiling it usually fixes my issue.
It is important to determine exactly where the paper stops. If it stops every time right after the sensor passes, as shown in the video - then the problem is in the sensor. When there is a problem with the fuser heat towel, the sheet gets stuck in different places, and the image is blurred. I have a video for this problem ua-cam.com/video/C2dcyLhGZsQ/v-deo.html Hope it helps you!
Пичове, конкретно с тея киосери, задръстването въобще не идва от екзит сензора. Вътре тефлоновата подложка, която има смазка в изпичащото платно се прецаква, което води до блокиране на изпичащото платно (не се върти). Тоя проблем възниква масово на притнтери с пробек от 30 до 60к копия. Отваряте печката, махате платената подложка, мажете със змазка за печки на HP и принтера изкарва още ~ 100к копия.
Great video. I just had a crazy time trying to put the rod back in with the spring. I could not work out how it goes in. Eventually the left side snapped after I try about 20 times. Do you have any close up pictures of how the spring is sitting? Damn i should have taken some pictures.
Hello and thank you for your VERY INFORMATIVE videos. If you call support, they will tell you to put the machine in "Quiet Mode" which basically just slows the machine and keeps the arm that the spring holds down from bouncing. I would like to add that another POSSIBLE cause for the error that you are addressing is a dirty lens where the arm drops down and breaks the lens contact. I discovered this after fixing the spring as per your video. I continued getting the 4211 error. This printer had a toner leak and it got all through out the machine. I simply cleaned the toner film off the ejector sensor and the printer started functioning normal.
Thanks for the info!
Can someone please point out where the lens is. Or where is the ejector sensor I have to clean. I keep getting a paper jam even after streching the spring. Thanks
I think your problem is
ua-cam.com/video/C2dcyLhGZsQ/v-deo.html
Helps for P2040dn. Thanks!
You are welcome!
Thank you for your video. Unfortunately, fixing the spring didn't solve the problem for me. I bought a new Fuser-Kit and changed it, but I'm still getting errorcode 6600. Hotline told me, maybe there is a defect sensor. Do you have an idea how to fix the 6600-error (new Fuserkit installed!)?
May be some mechanical problem. 6600 is fuser not rotating error.
@@GIMIKBG Thank you. But shouldn't this be fixed with changing the fuserunit?
If the problem is in the gears that rotate the fuser, changing it will not help.
Ok. Do you have an idea how to check the gears? Just by looking at them and trying to rotate them calmly with a screwdriver I didnt saw an error.
Hi
I’m having difficulty installing the spring in place your hands are masking the view can you explain with more detailed pictures
Thank you
I hope you have already succeeded!
How would you know that the issue is the exit sensor spring and not something else that is the problem? as usually all my P2040dn paperjams probems were solved with replacing the fuser heat towel and oiling it usually fixes my issue.
It is important to determine exactly where the paper stops. If it stops every time right after the sensor passes, as shown in the video - then the problem is in the sensor.
When there is a problem with the fuser heat towel, the sheet gets stuck in different places, and the image is blurred.
I have a video for this problem
ua-cam.com/video/C2dcyLhGZsQ/v-deo.html
Hope it helps you!
Thank you so much 🙏
Thank you too!
SIR MY PRINTER KYOCERA M2040DN. PRINTER PROBLEM PAPER JAM INSIDE EVERY TIME WHAT HAPPENED, PLEASE GIVE A SUGGESTION
This is your problem:
studio.ua-cam.com/users/videoC2dcyLhGZsQ/
Пичове, конкретно с тея киосери, задръстването въобще не идва от екзит сензора. Вътре тефлоновата подложка, която има смазка в изпичащото платно се прецаква, което води до блокиране на изпичащото платно (не се върти). Тоя проблем възниква масово на притнтери с пробек от 30 до 60к копия. Отваряте печката, махате платената подложка, мажете със змазка за печки на HP и принтера изкарва още ~ 100к копия.
ua-cam.com/video/C2dcyLhGZsQ/v-deo.htmlsi=RvIof28zsv1JR-jW
Thanks a lot
Thank you too!
@@GIMIKBG you saved me much money with your video. Greetings from Germany 🇩🇪😊
बहुत बहुत धन्यवाद
Thanks for your comment!
Hi, I need your assistance: abnormal noise in fuser unit (kyocera M3645idn), possible causes ?
Sorry, i am not sure what can be! Hope you can find your problem!
Thanks for the video :)
You are welcome! Than you too!
Thank you
You are welcome!
I want this spring urgently
Ask some printer service near you.
Mujhe vi chyhe
Great video. I just had a crazy time trying to put the rod back in with the spring. I could not work out how it goes in. Eventually the left side snapped after I try about 20 times. Do you have any close up pictures of how the spring is sitting? Damn i should have taken some pictures.
I hope you are ready now! :)
u re the boss
Thank you?
how to install the wire so that the installation is precise?
There is not special formula :)!
how to solve paper jammed code 4219 ,KM 2540 dn?
Sorry man! I cant find this error code in my service manual!
@@GIMIKBG how about code error 4209?
اخي من فضلك 2040 اصدار صوت احتكاك ما المشل وشكرا
Sorry, i cant understand you.
MY PRINTER KYOCERA 2050 SAYS PAPER JAM EVEN AFTER REMOVING THE JAMMED PAPER WHAT MIGHT BE THE ISSUE
Some paper sensor!
Red roll kai se khole😢😢😢sir plis pliss
Thank You
You are welcome!
Thank you
Thank you too! You are welcome!