Great Video and Works well so far, cannot believe this but the felt pad is such a stupid idea as I have been working on kyocera for over 20 years and this is the only machine which has caused endless problems as I have been only getting between 30 to 50k prints until it burns up... or starts jamming or giving repeated images etc. I used the HP G300 Grease and yes there was a little smoke for about the first 5 or 6 prints and also had a little smell for the first 20 prints or so but that was ok as I was still testing the fuser. Only printed a few hundred and all is OK. I now have 5 refurbished fuser units using this method and only time will tell buy I am very optimistic on this one. I have been a copier technician for 42 years and this method seems very positive to me as I have worked on toshiba, canon, kyocera, xerox, brother, Hp. etc in my past 42 years. Thanks. Tommy Raleigh.
H 19:57 19ola hello until now I watch this video and in Honduras as little I look at those copiers and I only used the Silicon in one and in another the fat hp and they worked well for me my question you stop using the plush the brown blanket that it brings and I only remove it and put fat on it and it has worked well that then or did you change your mind? For that fill it only lasts 50,000 copies and without that screen it will last the same? Le agradeceré su tespuesta
I have a problem with my Kyocera p2235dn. It flashes both paper jam and cartridge error led with regular indication. I also have a video of that error. How would I show you.
Hi, thanks for the video. I cannot find the grease in-store in Australia so can I use Kincrome 500g Hi-Temperature Grease ? OR can i get the Fuser Film Sleeve Grease Synthetic Grease PRINTER COPIER GEAR Lubricating Oil from ebay ?
Hello, I have already repaired the fuser with the HP grease, and the pages get stuck, but every time I print some smoke comes out of the fuser, do you know what it is due to?
Yes I just tried G-300 Fuser film grease , but it smells like it is burning. prints fine but will need to try another grease. WHERE DO YOU GET FFL ELECTROLUBE FROM???
I have a M2540 and keeps jamming the paper everytime.. is the fuser the one causing it to jam? In your video you put grease on the fuser, I have an extra fuser can I just use it to replace instead of applying the grease?
yes it's probably the reason for the jams. i personally prefer to replace the oil application pad, it's available and not expensive. the white plastic guide is not available to my knowledge. if you have a spare fuser you can use it, when the application pad gets dry you'll get the same problem though.
@@GIMIKBG oh, thanks for the info. Didn't know that. I'll try without one. I also have one supplier where the pads are with a coating, not the cloth style. Haven't tested it though.
Any idea how long this will last? Or do you lubricate it after some time/prints again? Thanks, I'll try it anyway, just curious about how long it lasts without the sheet.
Sounds comes from fixing while printing (like gears upset... Thak thak) in M2040 quocera... Some time paper stuck... What will be the possible reason please suggest...
hola buen dia podrdrias orientar tengo una kiosera M2040dn/L EL fusor se patina a mitad de hoja este metodo de kitar la telilla usando la grasa hp gp 300 desde tepic nayarit mexico xfa gracias
Hello, thanks for the video, could you tell me why after changing the fuser cylinder and the sheet, when I print I get the text repeated, thank you very much
bad quality replacement film sleeve or pressure roller resulting in too low fusing temperature, could sometimes be solved by taping the temperature sensors with one or two layers of capton tape, forcing the heating element to increase the fusing temperature. ;-)
You are on the right video. In the most cases of c6200 error in m2040dn printer is the fuser sleeve that i am removing here. Just follow the steps in the video, and it will work again. Hope you can get your printer working soon.
he intentado reparar dos veces un fusor de Kyocera mod P2040dn, cambiándole cada vez la tela (dos modelos diferentes) y engrasando estas camisas con grasa especifica para fusores, de alta temperatura, en la segunda ocasión utilice aceite de silicona liquido (dos jeringas) y en ambas ocasiones que realice esta reparación, funciono, pero solo duro unas 4 o cinco semanas de uso, volveré a realizar este tipo de reparación, en esta ocasión sin la manta y engrasando con aceite liquido de silicona, pero estoy convencido que este tipo de fusor yocera es una "gran mierda"
fuser oil needs a lubrication pad - if you remove the pad as instructed in the video, you must use grease - you could try re-lubing the pad or replacing the pad and lube with fuser oil
I couldn't find where to buy Electrolube FFL in the UK and I asked manufacturers directly and they said that this product is discontinued. Can someone suggest any good alternative. Prefer that company which is selling would be from UK or Europe.
Couldn't decide on what to use but read a forum post by someone who had used Super Lube synthetic grease so thought would give it a try. Used it on 4 machines a few days ago and all printing like new again with no jams, one having printed 500+ sheets. It does give a slight odour when printing but no smoke :) Cost £15 from Amazon for 85g tube which is probably enough for 50+ printers...
Acudo a la llamada de mi cliente, y su máquina Kyocera P2040dn al encenderla da un codigo de ERROR 6600:0066424 ¿alguien sabe de que problema se trata?
tras desmontar la caja de cambios Ref. 302RV94020, descubro que esta "estallada, y el engranaje negro interior, partido en varios trozos, hace menos de un mes, repare este fusor, colocandole una tela termica y engrasándola con aceite liquido de fusor, y ha estado funcionando correctamente, hasta hace unos días.....¿de verdad, que es posible realizar una reparación en condiciones a esta "gran mierda" de Kyocera P2040dn?
Abnormally high fuser unit thermistor temperature Fuser unit thermistor 1 or 2 is detected 250C/482F or more for 40 ms. In most cases following this guide in the video, will fix your problem. Hope it helps you!
@@GIMIKBG I mean, there are many questions in the comments, but there is not a single review except yours that it really works on large numbers of printed pages. Where does the fuser lub go? It is not hermetic. Plastic is not impregnated. Even if the method works on 100,000 pages, what happens next? Is the thermocell deformed?
@@mapazzzm it works on 80-120k copies. Plastic is not changed, but you may need to change the fixing film on 180-200k copies. I have some machines with 300k copies, only with the original fixing film, and lubricated them only twice! Hope this information helps you!
@@GIMIKBG In my office park there are 20 P2040, 15 M2040, 19 M2540 and I'm f*****d of changing this s*** to 2040 about every 50-80K, and 2540 every 15-30K. )) I will conduct an experiment in the near future, when the fuser will once again start smearing and will definitely unsubscribe about the result later. I think - in half of year or a year. If someone doesn't do it earlier in this video. You have quite a fresh video, I think many devices have not yet collected enough copies for statistics. Anyway, thank you! P.S. I love Kyocera always, but 1370-2135 and all of this series of devices were the best of all time.)
Great Video and Works well so far, cannot believe this but the felt pad is such a stupid idea as I have been working on kyocera for over 20 years and this is the only machine which has caused endless problems as I have been only getting between 30 to 50k prints until it burns up... or starts jamming or giving repeated images etc.
I used the HP G300 Grease and yes there was a little smoke for about the first 5 or 6 prints and also had a little smell for the first 20 prints or so but that was ok as I was still testing the fuser.
Only printed a few hundred and all is OK.
I now have 5 refurbished fuser units using this method and only time will tell buy I am very optimistic on this one. I have been a copier technician for 42 years and this method seems very positive to me as I have worked on toshiba, canon, kyocera, xerox, brother, Hp. etc in my past 42 years.
Thanks. Tommy Raleigh.
I have more than 50 FK-1150 units repaired this way! They works better than the original!
Thanks for your comment!
@@GIMIKBG have you tried to just lubricate pad without removing it?
Or maybe just removing one slice of it and lubricating the left 2nd one?
It is only one slice, and in most cases it is totaly damaged.@@dermarius87
H 19:57 19ola hello until now I watch this video and in Honduras as little I look at those copiers and I only used the Silicon in one and in another the fat hp and they worked well for me my question you stop using the plush the brown blanket that it brings and I only remove it and put fat on it and it has worked well that then or did you change your mind? For that fill it only lasts 50,000 copies and without that screen it will last the same? Le agradeceré su tespuesta
@antoniosanchezbaquedano3259 it will last more than 50k.
Tried this method on Kyocera M2540 Fuser...using HP Fuser Grease, it actually works!!!
Thank you for sharing this video!
Thank you too!
Brilliant hack! Very helpful. Done it on ECOSYS M2640idw. I use generic "Fuser Grease" available in India. Thank you so much!
Thank you!
Great video and guide. I had no problems during disassembly and assembly, although I was afraid of it. :)
Thank you!
I have a problem with my Kyocera p2235dn. It flashes both paper jam and cartridge error led with regular indication. I also have a video of that error. How would I show you.
Sir thnks for vedeo
So we can get out the "tapis "and continu working without it ?
Yes, sure! Just like HP and Canon printers!
Great Video and Works well
Thank you!
Hi, thanks for the video. I cannot find the grease in-store in Australia so can I use Kincrome 500g Hi-Temperature Grease ? OR can i get the Fuser Film Sleeve Grease Synthetic Grease PRINTER COPIER GEAR Lubricating Oil from ebay ?
Thanks for your comment! I have never used them! Just try something that works with HP sleeves.
Nice and very composed job
Thank you!
Does the same issue with the fixing film also occur on Kyocera P5021CDN & P5026CDN models.
I dont think so!
Hello, I have already repaired the fuser with the HP grease, and the pages get stuck, but every time I print some smoke comes out of the fuser, do you know what it is due to?
Hello! I don't think you're using the right lubricant. What we use is the Electrolube FFL.
Hope it helps!
Yes I just tried G-300 Fuser film grease , but it smells like it is burning. prints fine but will need to try another grease. WHERE DO YOU GET FFL ELECTROLUBE FROM???
@@glennallen958 I too would like to know a replacement grease as Electrolube FFL is no longer available.
I have a M2540 and keeps jamming the paper everytime.. is the fuser the one causing it to jam? In your video you put grease on the fuser, I have an extra fuser can I just use it to replace instead of applying the grease?
yes it's probably the reason for the jams. i personally prefer to replace the oil application pad, it's available and not expensive. the white plastic guide is not available to my knowledge. if you have a spare fuser you can use it, when the application pad gets dry you'll get the same problem though.
It makes more copies whithout the oil applicaton pad, but it is your choice!
@@GIMIKBG oh, thanks for the info. Didn't know that. I'll try without one. I also have one supplier where the pads are with a coating, not the cloth style. Haven't tested it though.
Give it a try!
What care is needed when using this method?
I have a P2040DN, Paper jams when printing and if it does print the print quality is low. Smudges. Does this procedure fix that?
Yes, this is your problem!
removing that pad after that applying only lubrication can it works without pad
Yes, i am doing this more than 5 years, and it works on every printer.
Will CK-0551-020 Original Grease G No.2 For HP LaserJet 20g work for this printer?
Just found this and no it is not good. "This grease is not for high temperature which is inside fuser"
This is high temperature grease. Specialy for fusers!
Any idea how long this will last? Or do you lubricate it after some time/prints again? Thanks, I'll try it anyway, just curious about how long it lasts without the sheet.
It last more than 100k copies. Tested on more than 30 machines
@@GIMIKBG whats the name of the lubricant could u please let me know that,, and its price plz
@@debanujit any fuser film grease for canon and hp will work. I am using HP.
Saludos desde Colombia, gracias por compartir tu experiencia.
You are welcome!
Sounds comes from fixing while printing (like gears upset... Thak thak) in M2040 quocera... Some time paper stuck... What will be the possible reason please suggest...
The steps in this video will fix your problem
Is the G-300 Fuser Grease the same? I tried this is it smells like something cooking.
It will work!
que liquido es el que le pones. y por que no vuelve a poner ese recubrimiento???
I am using FFL grease for HP fuser sleaves. It work better without it, and it is cheaper! Thanks for your comment!
So what can we get and where can we get it from?
Una consulta ese liquido que aplican , por que otro liquido lo puedo sustiruir??
What we use is fuser film grease.
Sir hamare kyocera p2235dn me print horaha hai par kahi kahi pe white line ke sath light print ho raha hai. Btaiye kya issu hoga.
hola buen dia podrdrias orientar tengo una kiosera M2040dn/L EL fusor se patina a mitad de hoja este metodo de kitar la telilla usando la grasa hp gp 300 desde tepic nayarit mexico xfa gracias
Hello, thanks for the video, could you tell me why after changing the fuser cylinder and the sheet, when I print I get the text repeated, thank you very much
Hi, it may be a low temperature, or oil on the fuser cylinder.
Muchas gracias
bad quality replacement film sleeve or pressure roller resulting in too low fusing temperature, could sometimes be solved by taping the temperature sensors with one or two layers of capton tape, forcing the heating element to increase the fusing temperature. ;-)
i've got error C6200 on my kyocera m2040dn, can you help me ?
You are on the right video. In the most cases of c6200 error in m2040dn printer is the fuser sleeve that i am removing here. Just follow the steps in the video, and it will work again. Hope you can get your printer working soon.
he intentado reparar dos veces un fusor de Kyocera mod P2040dn, cambiándole cada vez la tela (dos modelos diferentes) y engrasando estas camisas con grasa especifica para fusores, de alta temperatura, en la segunda ocasión utilice aceite de silicona liquido (dos jeringas) y en ambas ocasiones que realice esta reparación, funciono, pero solo duro unas 4 o cinco semanas de uso, volveré a realizar este tipo de reparación, en esta ocasión sin la manta y engrasando con aceite liquido de silicona, pero estoy convencido que este tipo de fusor yocera es una "gran mierda"
Sir can we use fuser oil to lubricate the fuser film ?
Hi. I am not sure. I am using the same lubricant for HP and Canon fuser films. I have never used fuser oil.
fuser oil needs a lubrication pad - if you remove the pad as instructed in the video, you must use grease - you could try re-lubing the pad or replacing the pad and lube with fuser oil
@@gersiu2 Sure, i am using grease, as you can see in the video. Thank you for your comment!
very helppul
Thank you!
give the guy who stood over your shoulder for 30 mins a pat on the back from me
Thank you!
thanks for the video!
You are welcome! Thanks for your comment!
I couldn't find where to buy Electrolube FFL in the UK and I asked manufacturers directly and they said that this product is discontinued. Can someone suggest any good alternative. Prefer that company which is selling would be from UK or Europe.
Same here!
Yes, this product is discontinued.
I am using HP fuser film grease!
@@GIMIKBG what's the name of the HP grease you use? is it the HP300 grease?
I am not sure! You must look for fuser film grease.
Couldn't decide on what to use but read a forum post by someone who had used Super Lube synthetic grease so thought would give it a try. Used it on 4 machines a few days ago and all printing like new again with no jams, one having printed 500+ sheets. It does give a slight odour when printing but no smoke :) Cost £15 from Amazon for 85g tube which is probably enough for 50+ printers...
Thank you
You are welcome!
i thank you so much
Thank you too!
Thanks for your video
You are welcome!
Nice video sir
Thank you!
What kind of lubricant did you use, sir?
I am using electrolube fuser film lubricant. But each lubricant intended for canon and hp fuser films will be fine.
@@GIMIKBG I appreciate it. Thank you very much.
@@JuanRamirez-ng9cp you are welcome!
if you are curious what lube exactly, its FFL ELECTROLUBE - just ordered some myself
Yes, it is ffl electrolube!
Oil pad necessary or not
For poor quality issue.
Why you are not using oil pad.
Comment me.
Thanks for your question. It is cheaper without oil pad, and fuser works more than 100 k prints without oil pad. Better than using it.
thanks
Thank you too!
Anyone have place to buy the FFL ELECTROLUBE grease as can not source in Australia. Have sold number of these machines.
I think you can use any grease designed for hp and canon fuser films!
You are welcome!
So what do you need to buy and where from any ideas? NZ preferred. Silcon or Synthentic?
From where did you buy the fuser film?
Local suplier here, in Bulgaria.
@@GIMIKBG can you please give me his website?
freckles.bg
Where can we buy FFL ELECTROLUBE from or what can we buy?
I cant find it anymore! Now i am using some HP fuser film grease!
Wooo eso no daña el fusor?
No! It works better, than the original!
no fuser film?
Hi, Alyxl. I am removig only the oiling sleeve. Than put back the fuser film and it works perfect!
@@GIMIKBG I put it like this but it stuck in duplex. without web features jam in duplex
hai sir how fuser lamp wire replace
Hi! I don't know how to answer this question.
You just disassemble and replace. It's about a wire!
without sleeve..??
Sure! It works perfect. I've made more than 30 fusers, no problems yet!
After this, I got Pepar Jammed in front cover problem
Check it again.
Maybe you messed something up during assembly.
Hope, you can make it!
Acudo a la llamada de mi cliente, y su máquina Kyocera P2040dn al encenderla da un codigo de ERROR 6600:0066424 ¿alguien sabe de que problema se trata?
tras desmontar la caja de cambios Ref. 302RV94020, descubro que esta "estallada, y el engranaje negro interior, partido en varios trozos, hace menos de un mes, repare este fusor, colocandole una tela termica y engrasándola con aceite liquido de fusor, y ha estado funcionando correctamente, hasta hace unos días.....¿de verdad, que es posible realizar una reparación en condiciones a esta "gran mierda" de Kyocera P2040dn?
kyocera m2040dn eror c6020?
Abnormally high fuser unit thermistor temperature Fuser unit thermistor 1 or 2 is detected 250C/482F or more for 40 ms.
In most cases following this guide in the video, will fix your problem. Hope it helps you!
Electrolube grease is no longer made what other grease you using HP grease is no good as the fuser are different to Kyocera & Brother printers
i do use chemplex 710 on hp and brother fusers. works fine so far. as the kyocera uses a heat lamp i would assume the fusing temperature is higher.
Thanks!
Great 👍👍👍
Thank you!
Same problem aa rahi hai ab bhi
You can make it. Just follow the instructions!
Has anyone other than the author already tried this method?
Someone :) !?
@@GIMIKBG I mean, there are many questions in the comments, but there is not a single review except yours that it really works on large numbers of printed pages. Where does the fuser lub go? It is not hermetic. Plastic is not impregnated. Even if the method works on 100,000 pages, what happens next? Is the thermocell deformed?
@@mapazzzm it works on 80-120k copies. Plastic is not changed, but you may need to change the fixing film on 180-200k copies. I have some machines with 300k copies, only with the original fixing film, and lubricated them only twice! Hope this information helps you!
@@GIMIKBG In my office park there are 20 P2040, 15 M2040, 19 M2540 and I'm f*****d of changing this s*** to 2040 about every 50-80K, and 2540 every 15-30K. )) I will conduct an experiment in the near future, when the fuser will once again start smearing and will definitely unsubscribe about the result later. I think - in half of year or a year. If someone doesn't do it earlier in this video. You have quite a fresh video, I think many devices have not yet collected enough copies for statistics. Anyway, thank you! P.S. I love Kyocera always, but 1370-2135 and all of this series of devices were the best of all time.)
@@mapazzzm you are welcome!
Pls try to explain
Explain what?
You can't add fixing film pad
You dont need it. It works without the pad. :)