SAVE $300 EACH!! How to Add an Outlet from Another Outlet
Вставка
- Опубліковано 28 вер 2024
- In this video, Chris shows how to add an outlet from another outlet. Technically, there is no limit to the number of outlets on a circuit so it's very common to wire a new outlet from an existing outlet. You are only limited by the amp rating of the circuit, meaning your running devices can't exceed the amperage of the circuit.
➤➤Non-contact voltage tester 👉🏻 handydad.tv/ncvt
➤➤Self-adjusting wire stripper 👉🏻 handydad.tv/wstr
➤➤Grounding wire connectors 👉🏻 handydad.tv/gnut
➤➤Wago 221 lever nuts 👉🏻 handydad.tv/wago
✅ Learn more about TOJA GRID pergola kits at handydad.tv/toja
☕️☕️☕️ If you liked this video, say thanks with a cup of coffee 👉🏻 ko-fi.com/hand... ☕️☕️☕️
✔︎Follow me on Facebook, Instagram and Twitter @HandyDadTV
REGARDING THE CONTROVERSY: The two sets of screws on a duplex receptacle weren’t put there as wire connectors; they are needed in case you want to split the two plugs on two different circuits. You can separate the two screws by removing the tab between them.
However, code allows you to use them as wire connectors if you want. But it’s not required.
Fantastic
After get done connecting the pigtails will them fit inside the Box just wondering if it will be a space for them?
@basicnunchucksduarnerey53 I always recommend deep boxes.
I was going to say it shouldn’t pass through and heat the receptacle up like you mentioned unless everything was on. Which would heat up regardless of the use of pigtails
This really made me happy bc I did it and it and got it to work for my grandpa I’m only 13 and I put in a new outlet in less then an hour he was happy and so was I
Wow good job
Wow way to go!
Good job buckarooo
Now that's what I call build memories
Core memory unlocked! Good job dude!
This was the easiest explaination ever. You can't mess anything up. Thank you so much for taking your time out to make this video. I just brought a house and they definitely skimmed on the outlets.
Glad it was helpful 👍🏻
Throughly explained. Not too fast. Perfect for DIYers like myself with so many questions. Definitely following for more videos and tips! Thank you!
Thanks for subscribing! Welcome to the family!
Just completed adding an outlet for my flatscreen behind the tv.
Your video walked me right through it perfectly. I tested everything and it was perfect.
Thank you
Glad it was helpful 👍🏻
I’ll be doing the same now that I’ve watched this tutorial. I had the gist of how to do it, but this gentleman’s instructions cemented my understanding.
@Josam01 You got this 👍🏻
This is a perfect video. Very very simple. Didn't muddy it up with a bunch of nonsense. This probably covers 99% of what people need. Just subscribed.
Thanks for the video!
Thanks for subscribing! Welcome to the family!
Thank you for a straight to the point tutorial. You're a very good teacher/instructor. Greetings to you and your family.
Thanks so much 😊
Thank you for these very helpful videos! I had a pro electrician install two 20 amp home runs from the house to the shed and I was able to finish the job myself thanks to your videos!!! My plugs and lights are on one 20 amp circuit and the other 20 amp has one dedicated plug for a window air conditioner. Thanks again!!!
Glad it was helpful 👍🏻
I want to run 3 plugs, one switch and a light/fan to a single plug for off grid. Can a single plug handle that?
G ood question. @@carolenglish5846
Hands down the easiest and cleanest explanation I've found!!
Thanks 😊
Great video! Of course the trick is always how you get the wires bent and back in the box. I'd like to see you do that. That is the one thing that is always challenging for me.
I’ll put it on the list. Thanks.
Along- Starting with the ground wire, fold in into a "Z" so it does not catch or cross the white and black wires as you z-fold it flat. Repeat with the white wire, avoiding conflicts with the other two. Offset the wires to one side so they don't stack up on top of each other. Finish with the black (hot) wire. Using two-gang boxes all the time instead of single-gang boxes will give you a LOT more space inside the box and make this easier. (I learned this last trick the hard way w after wiring an entire garage.) :-(
Chris, you are an exemplary instructor! Thank you! 😊
Thanks so much 😊 Glad it was helpful 👍🏻
Very good video. Regarding the overheat/over current from fastening both hots to the gold screw. Because of the shunt between the gold screws/post electrically they are the same whether individually attached or using the wago. Personally I like the wago far above screwing down to the post. Thanks
Thanks for your input
Great tutorial! Very informative and complete with clear explanations and demonstrations of the process from start to finish. I liked and appreciated that you didn't make it about yourself by trying to be cutesy or show your dog or significant other, etc. Friendly, concise, easy to understand, and at a good pace. Thanks!
Glad it was helpful 👍🏻 Thanks so much 😊
Thanks Dad!!! ❤
My pleasure
Thank you for the tip. Grounding wire connectors were new to me. Thank you for the tip about using the tester. I do so all the time and, just yesterday, I was working on my dog porch. The panel was supposed to shut down 8 outlets, the outside light and the 4 LED ceiling lights. I found a 3 way switch was still hot. The breaker was mislabeled and the inside lights are powered from the adjacent room's lighting circuit. Also I was warned by my electrician to avoid quick connectors. He had a couple get hot and melt; he thought because the metal connection is so thin. If wires are twisted together, 3 three wires shouldn't overheat using a proper sized wire nut. Also, my house was built with the cheapest outlets, so I replaced them with Leviton's upgraded outlets. My other home center stopped stocking Leviton, but seemed to have similar. Those are both great, excepting the metal back plate is also a ground strip.. usually still better than the 39 cent variety. When the dog porch was completed, I had the contractor install the outlets. Somehow the hot wire rubbed against that metal back plate. I'm not sure why, but after a few years, when plugging something into that outlet, the hot would come into contact with ground, so always make sure all that extra wire is tucked away from the back of the outlet. In my case it was never enough spark to trip the GFI or breaker but, after 6 years, melted the insulation off the last 1 1/2 inches of the black wire.
Wow. Thanks for sharing.
Thanks for teaching us. Very well explained and good vibes. Thanks
My pleasure
Super helpful! I'm adding to my basement (exposed studs behind wall and garage (exposes studs). Your tip about the Wago connectors was especially helpful.
Glad it was helpful 👍🏻
I just added an outlet, switch and light in a closet thanks to your videos! Great stuff! THANK YOU!
Glad it was helpful 👍🏻
Great explanation with real wires and real outlets. Very helpful.
Glad it was helpful!
OMG!!There, you said it finally here. YESSSSSS. It is the right way to wire it. Pigtail!!! Excellent work! Maybe an honest electrician with integrity have advised you to do it this way. Thank you
Thanks 😊
After I checked everything and walked my way back and couldn’t find the problem I called my cousin (that I forgot was an electrician) and he told me to check all the bathroom and check the GFI, because I was connecting the new line from a bathroom line the GFI from the other bathroom that control all the bathrooms tripped, after that he showed me how to do it and it works now. I really appreciate all your replies and knowledge. Thank you thank you.
Thanks for letting me know.
Exactly what I was looking for. Didn’t know how to handle the two grounding wires and the four cables. Brilliant
Glad it was helpful 👍🏻
Thank you for your videos as they definitely help the husband at home complete some simple diy projects. I have what may be a stupid question.. i’ve always avoided doing electrical because it can be very unforgiving. But I’m learning a lot more and becoming a little more comfortable. I am adding a second outlet using an existing outlet. My question is, what type of wire do I use? As I went to a hardware store to pick some up I found out there are many many different kinds. So as I said, I am new to this, so bear with me lol. Thank you for all your help.
Find the circuit breaker for the existing outlet. The number on it (usually 15 or 20) is the amperage rating. If it’s 15, you can use 14/2 wire. If it’s 20, you need to use 12/2 wire.
Thank you
well done.. most everyone will gain from this.. my case however,my uncle was great electrician.. trained by military.. owned his own company as electrical contractor... made a very good life after serving his country.. he always train his workers and me to always work with power on.. as he said,"more people get hurt from dead wires than from live... you kill power and if not in place where you can lock out tag out... somebody flips switch back on and POW.. youget zapped.. but if you leave power on you know to be more careful and not touch both wires at same time...he lived into his 90's..I'm in my 70's now and never had any zapps due to me thinking wires dead and someone flipped switch.. I always work with live wires BUT I am very careful and take extra time to go slow and safe..
Really good story, but I’m sure you can imagine, I can’t recommend that method to newbies who don’t have mentors like your uncle to teach them.
It is safer and easier working with a dead circuit unless there is no choice which is very rarely the case in a residential situation. As far as the concern of someone else energizing the circuit, I put a pad lock on the entire breaker panel after the circuit is shut off. If this is not an option due to panel design or other reasons, a circuit lockout device should be used on the individual breaker. Always check at the point of work that all wires are de-energized as more than one circuit could be coming into the same junction box.
Hi friend your videos are truly awesome, I do renovation here in Ontario Canada 🇨🇦. And I been learning lots of your video. God bless my friend, gir show tge way we all understand. Take care Dad. 😊
Thanks 😊
Black people like gold is how I remember it
Everyone likes gold.
Lmfao
Bruh 😂
Or Black Power + White Neutral = closed circuit
@@Titus-Adams😂😂😂 right it be our own ppl lol
Thank you for your video! I was able to get some new outlets in our garage 👍😎
Glad it was helpful 👍🏻
Quick question for ya. I purchased a Klein Tools RT250 GFCI Outlet Tester with LCD Display. It's saying "open ground." I used one of those green nuts with a hole at the end to twistthe two groundstogether.
Did I mess something up, or should it be reading that way?
@y00o00u00t00u00b00e Test the incoming ground wire to see if you can voltage when tested against the hot. If no voltage, there is a break upstream. If it has voltage, tighten the connection with the outlet pigtail.
so quick question, everyone i know and everything i have ever been taught says it’s fine putting the two blacks on the receptacle and two white wires on both screws. if it will create heat on the receptacle then it makes since those connections your using will create heat there. either way you look at it. they both become a distribution center for lack of better terms.
Nothing wrong with using the screws. I’ve done it my whole life.
But I made some early videos using that method and a lot of people commented that pigtailing was better. The other benefit, beside heat, is the outlet can be removed without disrupting the rest of the circuit. Of course, I always recommend turning off the circuit breaker first, but many electricians prefer to leave it on.
This is an excellent video, thank you. I do have one question. What if the original outlet has 2 hot wires and 2 neutral already wired in? How do I attach the 3rd wire from the outlet I want to install?
Same as the grounds: Use a wire nut or Wago to connect all the wires with a pigtail (short length of wire) to the outlet.
Simple straight forward how to, thank you
My pleasure
your video was very informative and you simplified each step. Thank you.
Glad it was helpful 👍🏻
New follower, exactly the knowledge I was looking for.
Thanks for subscribing! Welcome to the family!
Can I use wago for the ground wire as well? Is it allowed?
Yes
Great content here! Love everything except the mention of wago lever nuts having a higher operating temp range. I believe it is actually the opposite - most wire nuts have a higher operating temperature than Wago lever nuts.
It’s a moot point. Wire nuts and Wagos are rated for 105°C. Romex wire insulation is rated for 90°C.
@@handydadtv true.
Very informative video. Just had a question. Could you have created a pigtail for the ground wire just like you did for the black and white wires using one of those connectors? Or was there a reason you didn't? Thank you very much for your time and expertise.
Yes, I could have just used a wire nut and pigtail. No different electrically.
I had the same question thanks for answering
I have a light switch that turns my light off and a power outlet next to it. How would I fix this so the outlet remains on and the light turns off and on with the switch? Great content!!! This is my favorite new UA-cam channel.
Thanks but it’s impossible for me to say. This video showed you the basics. You need to open up your switch and outlet to see how they’re wired.
Makes sense. Thank you again and love your channel.
Very easy to follow what you are doing. Thanks
Thanks 😊
Thank you very much for this video, I did exactly what you thought and it worked perfectly. Thank you so much.
Glad it was helpful 👍🏻
So helpful. Annnnnd since you helped me scrutinize the details, I must tell you that I noticed at 5:34 that you have the black wire wrapped around the brass screw COUNTERclockwise. I wouldn't have noticed if you hadn't made a big point of it earlier in the video. Proof of good teaching! ;-)
Good eye!
I've never seen the through-grounding wire nuts FS here in California and ALWAYS use pigtails. ALWAYS check your local building codes to make sure that the connectors and methods that you want to use are allowed....
Thanks
I ordered a box of the ground wire nuts, never though of that what you pointed out, I would once in a while pigtail wire. Now I know more and make it easy to wire. I do use the wago got away from using wire nuts. Ill do this when wiring my new BBQ shed this spring
Glad it was helpful 👍🏻
Do they make wiring nuts with holes in the center for the black and white wires
@@TheKonakairay no just the ground.
@TheKonakairay No, that’s only allowed for the ground.
Ok ty guys
Perfect, I was able to add a receptacle by just watching your vid!
Glad it was helpful 👍🏻
Great job explaining it to a newbie like me. Thank you Dad.
My pleasure
Awesome, thanks for this. Quick and concise.
Glad it was helpful 👍🏻
So simple 👏🏼 thanks! Question tho! Can I add another outlet from the new out let ?
So it would be
Existing O.L.--new O.L.--new O.L. ???
Yes just repeat the process.
Thanks for the easy video! was able to do some work in my place.
Glad it was helpful 👍🏻
Thank you for the video..I’m adding a fireplace in the wall and adding a extra outlet for it my question is to get the right wire that I need ?
I would only use the heater if it’s a 20-amp circuit. Check the number on the breaker.
If it’s a 20-amp breaker, use 12/2 wire to the new outlet.
If it’s a 15-amp breaker, consider running a new circuit if you intend to use the heater.
Excellent explanation. You are God sent.
Glad it was helpful 👍🏻
yoooou are the best, thank you so much for making such a straightforward and easy to follow tutorial!
Thanks 😊
Thank you! What if the first box is on a switch and you want the new box to be always on? Thanks.
It depends. This video explains how to switch half an outlet. If yours is like that, you can run the new outlet from the line that’s always hot.
ua-cam.com/video/5D4itWGtTVQ/v-deo.html
Many thanks for your videos. I have watched several. They are extremely helpful. Do you have a video for a GFCI Receptacle installation with other outlets in-line? Thanks, again.
Gotcha covered
ua-cam.com/video/inpvNt6591E/v-deo.html
Appreciate that unc, that was well explained and very detailed. I’m glad I made it to this video🤝
Glad it was helpful 👍🏻
Your my got to for wiring !
Greatly appreciate your informational videos !!
TWO THUMBS UP !
And a Star !
Thanks so much 😊
Should you do the same if you wanted to add another outlet that piggy backs off the new installed outlet?
Yes. I should have mentioned that.
Handy Dad did not mention wire size. New outlet must be wired with ssme size wire if wired in msnor described in video
You’re right. Thanks for catching that.
Great job. House wiring has always been a bit intimidating. Im subscribing
Thanks for subscribing! Welcome to the family!
Super easy to follow and am gonna try this later today to install a few outlets in some larger closets I have. Subscribing because I’ll probably be back to see your other videos 😀
Thanks for subscribing! Welcome to the family!
Newbie here (literally my first time doing this), is there a limit to this method of adding more outlets from the same circuit? For example, rather than doing this once for 1 additional outlet, what if I wanted to keep the chain going to add numerous outlets throughout a large room that only has 2 outlets.
Thanks for the help!
There is no limit to the number of outlets on a circuit. You are only limited by the power consumed by everything plugged into the circuit. For example, having 5 outlets doesn’t mean you can run 5 space heaters at the same time.
Very good explained. Clear video 👍
Thanks 😊
Why didn't you show how to connect up the neutral wires on the original receptacle? I take it you're supposed to pigtail those up as well?
Yes
Great video, how would I install an outlet on a wall with no existing outlet. There is an outlet in the bedroom behind the wall I want to install the outlet.
How to Add an Electrical Outlet through a Wall
ua-cam.com/video/BU5Yjy5GrGg/v-deo.html
Thank you!
You're welcome!
Can you add more than one outlet from the existing outlet?
Yes.
Just repeat the process.
Can you explain where that third black wire came from after the pig tails, is that an additional piece that you cut to conduct electricity to the socket?
Yes.
Can you or Do you have a video on splicing into a line that has a outlet at the end but adding a new outlet before the first one
I show how in this video:
ua-cam.com/video/klL8XhKMNT8/v-deo.html
Thankyou ,You explain so simple and easy
Glad it was helpful 👍🏻
Complete novice here, with what is probably a stupid question, but here goes! When creating the pigtails, where did you get the extra length of black and white wire that run from the connector to the screws? I apologize for my lack of knowlege. Thanks!
Cut them from a piece of Romex. You can buy rolls of 25’ or more, or by the foot at most hardware stores.
SUPERB VIDEO! This is exactly what I needed! SUBBED!
Thanks for subscribing! Welcome to the family!
Thank you so much for your videos I'm no longer in the dark or in the dog house, LOL. But in all reality your videos are explained in a way that must people not in the electrical field can perform minor jobs.
Thanks so much 😊
Excellent! Your video will make the job much easier!
Glad it was helpful 👍🏻
My brain just couldn't figure out how the third wire popped up then I watch the video again thanks for the simple explanation!
Glad it was helpful 👍🏻
CAN I PIGTAIL FROM A 2 PLUG IN TO ADD A FOUR PLUG IN OUTLET? THANK YOU. THIS VIDEO IS AWESOME
If you mean two duplex receptacles in a double wide box, yes.
Brass = Black B’s make it easy to remember! Good video
Another one I’ve heard is “white to light” because the hot screw is always dark (brass or black) but the neutral screw is always lighter (usually chrome).
Thanks for this video! I’m in this situation adding an outlet on the other side of our bathroom vanity. Any special steps for adding the second outlet from a GFCI outlet?
I’ll be doing a video specifically on this topic soon because it’s a common question. But this video will also help you: ua-cam.com/video/dbmRETinw0A/v-deo.html
Thank you!
Great video with much needed information,GOD BLESS
Thanks 😊
Great Video very helpful! when wiring multiple outlets on a run, do you want to make a pigtail for each outlet
Always use pigtails on the ground. I generally use the screws for white and black, unless I have a third wire.
Why not use the Wago connectors for the ground as well or does it not matter?
You can.
Just to clarify, the ground can be bonded using the same type of pigtail as the the other wires correct?
Yes.
Would this be good to add an outdoor outlet for an inflatable hot tub?
No, you should run a new circuit for a hot tub.
Great video. Thanks.
I would like to add an outlet from one bedroom in my trailer home to a porch using the type of wire shown in this video. My question is, do I need to run the cable through a piece of conduit PVC pipe? The wall is only 4 inches thick.
Check local codes. Some areas require conduit or shielded cable.
Can you connect the blacks together and the whites together just like you did the ground using a greenie ?
Those connectors don’t work with insulated wires.
Where did the small wires come from that attaches from the pigtail to the original outlet?
I cut them myself.
If you pigtail the wires because using both screws on one side could get too hot then why do they make them with two screws?
I have no issue using the screws. But lots of people prefer pigtails.
@@handydadtv seems the heavier duty bridging on an outlet could handle more current than the thin gauge metal in a wago yeah?🤷♂
I don’t do scientific testing, but residential outlets are rated for 15A or 20A. Wago 221 lever nuts are rated for 32A at 450V.
Question: Can you Add an outlet from another outlet if that outlet is a GFI Outlet? I'm connecting the new outlet in my top cabinet for the OTC Microwave.
Watch this to see how GFCI Outlets are wired: ua-cam.com/video/inpvNt6591E/v-deo.html
When adding the microwave outlet, connect it to the LINE side of the GFCI, not the LOAD. You don’t need the microwave to be GFCI protected and it might cause tripping if it is.
Is it okay/safe to run a second outlet off of the newly added one? Almost like leapfrogging? Say, for example, run a 3rd outlet off of the new one you just installed in this video?
Yes just repeat the process.
So did the wires from outlet 2 plug into the wago adapter? I may have missed it.
You can use Wagos or wire nuts or the available set of screws on the outlet.
Any recommendations on what tools to buy ? Im looking to learn more and do some work around my house. Mostly adding outlets to garage and behind mounted tvs.thanks
I don’t have a list, but start with hand tools: hammer, screwdrivers, pliers, tape measure, utility knife, etc.
Then advance to power tools. With cordless tools, stay with one brand so the batteries are compatible.
My motto is: “buy a tool when you need it and add it to the cost of the project.”
I am adding a new outlet to my kitchen. The closest outlet to the new one appears to be the first in the chain that goes across the kitchen to the other side of the room through the ceiling. How do I add the new outlet without disconnecting the other one?
You should use wire nuts and pigtail them together.
Could you have used the wago for the ground wires?
Yes
Thanks for making this content.
My pleasure!
Thank you for this! I'm about to embark on adding an outlet above my gas fireplace in the living room so I can hang my TV there, and I'm pretty nervous about the whole thing! Could you do a video about this project? I don't know if I need to add something to include my HDMI wires or if I will just add a mantel and have the game systems near the TV. I need to run the new wires to the left and down the wall to the nearest outlet and piggyback things together. I could use any advice you have! Thanks :)
Gotcha covered. See how I handled it here: ua-cam.com/video/50qDt14fofQ/v-deo.html
Is it the 2 connector wago or the 3 connector wago that you use?
I use both.
Thanks. Question, if I want to add a switch and light to the first outlet, (source outlet) do you think that’s still possible?
How to Add a Light from an Outlet
ua-cam.com/video/xOZv17BPTZA/v-deo.html
Great video!! New sub! I have an issue wiring a ceiling fan hoping you can help.
I have a ceiling fan that has (including ground wires), 3 wires from power source, 3 wires from wall switch, 3 wires going out the other side of fan junction box to one outlet. I need some help on how to join all these at the fan. Can you help? Thank you my friend 🙂
First, open the switch to ensure the black and white wires are connected to the switch. If they are, put black tape around the white wire to indicate it’s not a neutral. Do the same with the other end of that wire in the ceiling box.
Connect all the grounds together and hot (black) wires together, including the fan.
Connect that white wire with the tape to the blue wire on the fan. That will control the light from the switch.
Connect all the neutral (white) wires together, including the fan.
Thank you so much!
Hello, What length do I strip the wire that will go around the screws on the receptacle?
Around 1/2-3/4”
Can you do this multiple times to add 3 or 4 more outlets? Or is this only able to be done on one outlet?
You can add as many as you need. But adding outlets doesn’t add capacity. You’re just sharing the same circuit with more outlets.
Great video !! and what if you need two new outlets. Do you just do the same on the new outlet ?
Yes just repeat the process
If I'm trying to add an LED mirror to my bathroom, would doing the same kind of wiring here work? There is an on/off button on the mirrior, and doesn't need a ground, so I'd assume just wiring it like this would be okay?
Assuming the mirror has a plug, yes. But in a bathroom you need to use a GFCI Outlet. ua-cam.com/video/inpvNt6591E/v-deo.html
Very nice explanation. Now I understand more than I ever did before. Thank you. I'M SUBSCRIBING 😊
Thanks for subscribing! Welcome to the family!
Instead of using a wire nit on the ground, can you use a Wago?
Yes