How To Make Your FPV Video The Best It Can Be | OSD Shimmering, Noise, Light and Dark Patches GONE!
Вставка
- Опубліковано 29 вер 2024
- Hi guys, I was looking for a way to get better analog FPV video. And then I came across a video on YT that really helped me out. I don't want to say this is my idea in any way. I just want to show with this video, that his solution works. And it can help a lot of you with FPV problems as well.
°°Link to "Propsoff" °° Channel: / @propsoff
°°Link to "Best FPV Video Ever"°°
• Best FPV Video EVER! |...
°°Links to Voltage regulator°°
-www.unmannedte...
-www.banggood.c...
Used in this video: -Caddx Ratel: www.banggood.c...
-Iflight Nazgul 5: www.banggood.c...
-Matek HV VTX: www.banggood.c...
-Realacc Pagoda: www.banggood.c...
-Foxeer Patch: www.banggood.c...
If you are wondering what my gear is, list below :)
The links below are affiliate links, which means if you click
any of those links and make any purchase I will receive a small commision.
The price of the product will be exactly the same as if you would look it up yourself.
So what’s the difference? You will be helping me and my channel, and I
would be very grateful.
Drones:
Mobula 6 25000kv FrSky: www.banggood.c...
Iflight Nazgul 2750kv FrSky: www.banggood.c...
FPV Gear:
Goggles Skyzone 03O: www.banggood.c...
Transmitter FrSky Taranis X9 Lite: www.banggood.c...
FrSky XJT Lite Module: www.banggood.c...
Realacc Drone backpack: www.banggood.c...
Batteries and Charging:
Charger HOTA D6+ 300 AC charger: www.banggood.c...
Strix 4S Parallel Charging board 2.0- Joshua Bardwell signature line
1S parallel charing board: www.banggood.c...
4S Batteries Tattu R-Line 1550mAh: www.banggood.c...
1S Batteries 300mAh: www.banggood.c...
350mAh: www.banggood.c...
450mAh: www.banggood.c...
Torvol Lipo safe bag
Tools:
7 tools which I use a lot: www.banggood.c...
Battery Checker 4S: www.banggood.c...
1S: www.banggood.c...
Camera:
Runcam 5 Orange: www.banggood.c...
°°°Music°°°
/ facing-the-impossiblec... Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/al-frag...
Music promoted by Audio Library • Fragments - AERØHEAD (...
Very Very clean! I am so glad you get the same results and now enjoy such good video. Thank you very much for mentioning PropsOff in such a kind way. Nice rip too...👍🏻🍻👊🏻
Thank you 😎😄 I just felt I had to share this because it really works. Hope your video gets the attention it deserves! 👊🍻
Thank, I think we all would like FPV rather than FPv.
can't wait to upgrade to digital lol. thanks for the video though
Thanks man! 😄 I switched to digital about a year ago, worth every euro 😋!
Watching one video only to be told to watch another video.
I know, sorry about that 😋. His method worked for me, and I wanted more analog pilot's to see his video. I could have just copied 'propsoffs' video, but that just doesn't feel right too me.
Good tip I’d missed that PropsOff video. In his video his plan for cross grounding / redundant grounding seems targeted to the board design he’s got, he’s grounding between the different sections of the board. Did you do redundant grounding? I’m wondering how to apply it usefully to a smaller board.
Well it's been a while since I did that mod, but I believe I powered the camera directly from the main lead with a voltage regulator in between. I also did redundant grounding yes, especially the vtx and the cam pad pad even tho it was unused, but because most ground are connected, I thought it could help to give that area of the board better grounding and so less noise into the system. What do you mean by "smaller board"? Like a TW board or 20x20?
Thanks for replying! Yes, I'm looking at a 25mm Betafpv AIO. May try grounding from VTX to the ground in the VTX section of the board (it's unused as I'm trying a BEC from battery for VTX power) and see if it does anything. But that's sort of random, I'm not sure if it would be doing the same thing as what he's doing on that larger board.
@@cw8165 You're welcome👍😃, that's a good idea. But I'd say try grounding it directly to the battery lead ground, that's the "biggest" ground you have on the board. And make the battery lead as short as possible, that's also a big noise maker.
A small cap could also help, not sure that'll do much one a 1s.
The best video I ever got on a TW is when I used a TBS nano vtx ( the one that goes up to 500mw)
you know I have an old matek full size PDB on one of my 5 inchers... reason being I accidently blew the positive trace on the vbat rail doing something stupid for the camera power... had to use the PDB. Video looks really good! Just built a new drone with nearly identical parts and have a ton of noise... I wasn't sure if those mini PDBs would fit the issue but you are saying it will?
I'd say yes, use a mini voltage regulator to give the vtx filtered power, and power your camera from the vtx not the main board. But I can't be sure unless I see your build...
If the image still isn't clean enough connect the ground pad in the camera area (on the fc) to the ground pad on the vtx.
I'm sure you know all this, try and keep the main battery lead as short as possible, and of course use a capacitor, on the board side not the xt60 side.
Nice it’s much cleaner !
Thanks, it's a big difference, seeing where I am going is awesome 😅😆. BTW your cat stick cam, that's funny!
Can you show the wiring diagram?
I will refer you to video where I found this, he explains everything very good, with a wiring diagram. ua-cam.com/video/OXOmYrez3rE/v-deo.html&ab_channel=PropsOff
3 Year anniversary of this video and your support.. You still flying? I haven't been as much, many laws came in the last 3 years. Hope your having fun...🍻
I checked that video out also...Guy sounds like he,s recording and doesn,t want anyone close to hear him
LOL 😂 Maybe he's scared of eavesdropping, gotta watch the video if you want the info 😂! Very good info tho 👍
My fpv feed breaks up at about 50 meters on 350 mw, is this normal?
Help would be much appreciated. 👍
awesome. thank you
Thanks, appreciate it 👍
Great information thank u.
Thankyou
Your welcome 👍
Thank you 👍
Happy to help👍🙂
Nice video no one could seem to find my problem, but you nailed it
That's great to hear!