Dual Shocks! 80's Show Truck Build, The New RC4wd TF2 Yota Xtra Cab, Part 2
Вставка
- Опубліковано 3 жов 2024
- This build is getting expensive, adding dual shocks to all 4 corners, getting the rc4wd roll bar and rear bumper installed and more TF2 tech!
The xtra cabs are available now on rc4wd.com! Here is the parts list with part numbers:
Xtra cab parts list
truck Part Number: Z-RTR0064 $569.99
tires Part Number: Z-T0056 $25.99 x2
wheels Part Number: Z-W0014 $92.99
Roll bar Part Number: Z-S2140 $44.99
rear bumper Part Number: Z-S2142 $39.99
KC lights Part Number: Z-E0036 $15.99
Lift blocks Part Number: Z-S0011 $13.49 x2
90mm shocks Part Number: Z-D0015 $33.99 x2
80mm shocks Part Number: Z-D0012 $33.99 x2
Shock boots Part Number: Z-S0962 $8.99 x2
Dual shock mount Part Number: Z-S0028 $74.99
Bumper mount Part Number: Z-S0004 $16.99
Parts Total= $518.84 plus shipping and tax
Plus Truck $1088.83
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink....
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX - Авто та транспорт
Measure twice , move to the other bench , oh I've forgotten how much was it again? Measure again,, cut short test fit , measure again , forget , ahahhh. My bane but happy about it😂
I seriously appreciate these videos on this build. I have the same truck now and have already been pulling out my hair. Your vids save me so much stress lol.
I know this sounds pretty fake but how about a black piece of vinyl for a sunroof or maybe a window visor windshield visor? I’m not sure what they’re called.
Wow beautiful engine compartment that’s bad to the bone
With a knife and steady hand you can cut a drawing pencil to have a tip as long as you want it.
Sometimes I use sewing needles , just to make the tiniest of marks which I can then drill nice and where it needs to be
Off to a good start! Needs an old Bmx bike
A brush guard with some KC lights and rear facing bench seat in the bed along with a cooler would look good. 👍👍
Hey love the toilet sitting there 😁👍👍
Sometimes less is more? You have enough patina trucks... So maybe one clean pristine one is also ok? I mean with the use and mud and all it will still have its own patina... ? Could be good as a hauler too, and a jet ski or quad on a short trailer?
Anyway love your content and roll with what you have . Peace
There’s always the tilt bed option like the pic I sent you on instagram. Lol
Heck yeah love it dual shocks all the way around my blazer came from the factory with dual shocks on the front Limited addition Chevy blazer. Looking super sweet. Appreciate you sharing catch you on the next one until then peace and chicken grease 😁👋👋😎
Perfection achieved!
87 Banshee with the J-arms would look the part sittin in her bed. Have to say you really turned that extra cab out Josh. Definitely takes me back to the 90’s for sure.
I’ve just ordered my Tf2 lwb chassis with the red soft leaf springs
I’m so glad you did all this first. I’m definitely going a different direction now. Lol
Needs a whip antenna.
Very beautiful model, excellent work bro!) 🛻🤩💥💯💪😎👍
A gun rack in the back window properly equipped with a gun would be 80s
When you are popping off the body, I noticed the doors opening to easily and it made me think. I am actually glad the K10 doors don't open
Truck looks awsome. It need a steering stabilizer though
It does! I completely forgot about those. With matching shock boots😂
Had a rancho stablizer on my xtra cab, red shock cover and logo looks real like..
Modern Mountaineer!
My blazer has dual shocks
Looking sweet! Sorry for the stresses but so glad you leave some of in to show us novices that even the experienced peeps have a rough time in this hobby sometimes! 🙂👍
Man when it becomes the job it always leads to stress. but it's still better than the alternative Ive had before. A bad day stressed with RC issues is way better than a day at the factory. Im happy to be where I am.
@RCeveryday I hear that buddy. Love your channel. I can't afford RC4WD stuff so love watching what you do with them! 😁👌
Try tractor supply for some scale accessory
That’s Bad Ass!!! Fun change-up. Need a miniature Bad-Boyz sticker. I have a Honda quad that would look good in there. Remember the colored windshield wiper covers?
Haha! I remember the wipers, that would be epic!
Looking good so far.
What about some yellow pinstripes around the "speedblock" graphics?. (reminds me of Yamaha speedblock graphics)
Would a dirtbike look reet enough in the bed of it?.
Put the stickers on the shocks
Think it should be called toyota shy-lux
Wow looking sweet Josh, love the white and the polished rims yeah. I’m watching 6:04 PM Monday love it dude looks great
Use the tip of a RC body reamer to mark the holes
A three wheeler would be awesome in the bed
Love it! I appreciate all of the time and money you spent to get the truck finished and it looks great. Excellent job! That said, I think I'll keep mine stock. : )
Man, that is looking so sweet ! Sets perfect!
Definitely worth the effort looks so cool
You could send it to me I’ll figure something out 🤣🤣
You should add a sound kit to it but overall it's a good looking rig!!
It's looking good!! 🤙🏾😎
Ahhh you’re bringing me back to the 80s… great times ! Excellent build !
Where are you finding the scale hardware ? Thanks
I use the m3 scale bolts from lockeduprc
Awesome new look, very good job mate 👍💪😜👋
Nice build👌
What's the length on the rear leaf spring you used to make wheel align with the fender
Very nice Josh. Maybe a long folded antenna on the rear bumper and is done!. 👍
Twisted tree rc has some rad whip antennas.
Thanks for sharing. I l actually had in mind the one with the tennis ball for this rig. The CB one for my G Lee rc.
Monroe shocks are yellow
I don’t know how you afford all this new rc stuff……….😊
From you guys watching these videos and helping support the channel🤘
Nice video🛻🛻👍
Is that the same wheelbase as the forerunner? Is there a reason for the carrier bearing? If so, thanks for your time and your content and of course nice.
This is on the TF2 LWB, its around an inch longer than the original TF2's. The origianl hilux, 4runner and blazer fit the standard wheelbase, the scottsdale, this xtracab, and the 4 door hilux are on the LWB.
@@RCeveryday thank you very much! I really enjoyed your videos throughout the years. Looking forward to more really like your shop set up to thanks again for your time.
Can you please, share what screws you use and where you get them..
I get them from lockeduprc.com. M3 scale hardware. They sell by size or in vehicle packs.
You need a printer, my wife prints my money 🤑
I second this, With a good curing station it's hard to beat. I just feel like this model is just way too overpriced for what it is to dump more into it but some people like the size.
Real nice looking work there bro! The tire wheel combo looks great. I have the same centerline wheels and also bought the new Centerline Warrior 1.55 wheels from Rc4wd. I’m trying to decide rather to buy this one or the red 4Runner from Rc4wd? Do you have the new 4Runner also? I read that you are selling chassis now ?
I dont have the newest 4runner, mine is an older build. Ive been selling my rat rod kits now for almost a year.
@@RCeveryday where do I find them?
rceveryday.com
👍👍👌👌👌👀👀👀
*PromoSM* 😈