Surprise, surprise! Today Guardian Safe & Lock has had 2 releases for our loyal and patient subscribers. Did you like the video? Let us know in the comments!
Good demonstration. Thank you for staying with it to get the broken key out of the door knob. It demonstrated you don't give up and keep trying different angles until you can get hold of it.
awesome simple instructions. my wife broke her key off in our patio door lock flush to the lock, after watching the video it took her 30 seconds to extract the key. Thanks Uriah.
just wanted to say thank you so much for this video - I realized I needed special tools. With your knowledge and proper tools I managed to get the key out. FYI the key broke perfectly where there was no way of going over it.
Thanks for showing these techniques. I was able to get a key stuck in my lock by using things I learnt in this video. Many thanks and keep sharing videos teaching techniques.
Thanks buddy! I had the concept before I watched your video, so I knew I was on the right track. I’d given up hope until I watched you! Thanks for the inspiration! Took me less than a minute after I watched you. Thanks!
I had a key broken in the lock on a home door. I grabbed tweezers, needle nose, and what really did it was the dental cleaning set I have. It worked like a champ. I know, most people hate the dentist and would never have their own professional dental tools.
My Double-Sided & Four-Sided Key broke in the lock. Good luck getting that thing out. Now we are STUCK in our apartment as it is almost midnight now. Hoping no emergencies happen till the morning...
update on the situation, a very experienced (I assume) locksmith solved the issue in about 5 minutes: as far as I understand, he sprayed the lock with oil, did something with some sort of File, and BAM the broken part was out, the lock was not destroyed in any way. Clean...
I broke my key off in a truck door while removing it. The company mechanic took a large paper clip, bent the tip and put a drop of super glue on the bent end, stuck the paper clip to the side of a magnet, which was stuck to the lock face to steady it while it adhered. While holding the flap open with a screwdriver, he touched the tip to the broke off key and eventually pulled it out. He'd done that before. Thanks
Great examples. But what do you do if with a mortice security door key that is broken on inside and outside Key won't turn so door is locked where I can't open it to get to the set screw. If the inner lock key is turned should I be able to open from the outside?
Great video! I really appreciate how you explained everything especially how to work around unexpected difficulties while trying to remove the broken key. Thanks so much for sharing!
Thank you 🙏🏻 We try to produce and publish consistent useful content as often as possible. Please consider subscribing to our channel, and if your interested, check out our other channel “UDROpreneur” thanks!
By a $6.00 feeler gauge set use +/-0.025 and grind down the height enough to slide on the sides of the keyway. Smear baking soda on the front of the cylinder and keyway.. Put a few drops of super glue on one side of the modified feeler gauge (key side) and slide into keyway and allow to set up. Remove key. You can also use old or broken picks if they're thin enough and you have some kickn' around.🔐
Not if the super glue is at the tip of the tool (glue is facing the key side only?) The tool is slid in-between the keyway and broken key It will only makes contact to the key. Let setup and jiggle pull or zip it out. Whatever technique works best.
Maybe I’ll try that one day. I just use the broken key to lock and unlock the door but I can’t make a spare so I guess I’ll need to make another key one of these days so I’ll dig it out. Thank you.
A mini file works great just insert under the broken key pry down until you've got grip and slide out. A paper clip with a hook bend at the end sometimes works too.apartment maintenance
Use a tiny flat head screwdriver, like what you find in an eyeglasses repair kit. Put the smallest bit of gel super glue, and touch it to the key. Count to 10 so it's dry, and pull out your key. Voila! I've used this method a few times and so far, it has always worked.
Hi, my primary key, the whole end of it, broke off and the door is locked. Can you give me a hint how to get the broken part out and also how to open the lock? Thanks
I had my key break off in my car ignition and I have used a jigsaw blade. I filed it thinner and was able to get it up there and grab the teeth and pull it right out. It would still start with a broken kit but that was a bad idea since anyone could get in and start the car lol
Again, another great video and very informative as usual. 1 question 🙋🏽♂️- in a real life situation, are you able to adjust the door to a suitable angle like you did the practice device? Lol
Harry Adu lol to answer your question no but in a real life situation the lock will be mounted to a door making it sturdy, the only reason it was leaned back was to make it sturdy not to make it easier. Anytime we try to pick a lock or demo on a display it’s kinda frustrating bc it moves all over the place as you try to pick it or extract a key.
This comment is about a different video I watched on your channel. I’m subscribed. You referred to ‘Fundamentals of Master Keying’ by Jerome V. Andrews. I tried to buy the book but could not find it. We’ve just recently purchased a locksmith company up here in Ontario, Canada. Oddly enough, we don’t have to be licensed here to have a locksmith company. So I am unable to give a license number to another locksmith supplier in order to get this book. Can I purchase this book from you? We take over the company on the first of January 2025 so I would like to learn what I can now. Thanks. Dennis
Surprise, surprise! Today Guardian Safe & Lock has had 2 releases for our loyal and patient subscribers. Did you like the video? Let us know in the comments!
Yoo
I pulled a brokeen key using plier cutters right now
Mr x fuo😅lyl ykl
Omgg why does it have a 2-step verification?
Good demonstration. Thank you for staying with it to get the broken key out of the door knob. It demonstrated you don't give up and keep trying different angles until you can get hold of it.
awesome simple instructions. my wife broke her key off in our patio door lock flush to the lock, after watching the video it took her 30 seconds to extract the key. Thanks Uriah.
just wanted to say thank you so much for this video - I realized I needed special tools. With your knowledge and proper tools I managed to get the key out. FYI the key broke perfectly where there was no way of going over it.
Thanks for showing these techniques. I was able to get a key stuck in my lock by using things I learnt in this video. Many thanks and keep sharing videos teaching techniques.
I'm so glad I came across this video it has helped me tonight get my broken piece out of the lock..Blessings!!
Thanks buddy! I had the concept before I watched your video, so I knew I was on the right track. I’d given up hope until I watched you! Thanks for the inspiration! Took me less than a minute after I watched you. Thanks!
The small flathead on the bottoms worked wonders my mom broke her key in the lock and I was able to get it out super easy.
Thanks, ended up using your technique with the small blade on a pen knife and worked like a charm.
Thanks so much. It worked following your instructions. Total life savor!!
I had a key broken in the lock on a home door. I grabbed tweezers, needle nose, and what really did it was the dental cleaning set I have. It worked like a champ. I know, most people hate the dentist and would never have their own professional dental tools.
My Double-Sided & Four-Sided Key broke in the lock. Good luck getting that thing out. Now we are STUCK in our apartment as it is almost midnight now. Hoping no emergencies happen till the morning...
update on the situation, a very experienced (I assume) locksmith solved the issue in about 5 minutes: as far as I understand, he sprayed the lock with oil, did something with some sort of File, and BAM the broken part was out, the lock was not destroyed in any way. Clean...
I broke my key off in a truck door while removing it. The company mechanic took a large paper clip, bent the tip and put a drop of super glue on the bent end, stuck the paper clip to the side of a magnet, which was stuck to the lock face to steady it while it adhered. While holding the flap open with a screwdriver, he touched the tip to the broke off key and eventually pulled it out.
He'd done that before. Thanks
Great examples. But what do you do if with a mortice security door key that is broken on inside and outside Key won't turn so door is locked where I can't open it to get to the set screw. If the inner lock key is turned should I be able to open from the outside?
Thank you! You just saved a teacher $50-200...2:10 is all it took. Thanks for sharing this info!
Great video! I really appreciate how you explained everything especially how to work around unexpected difficulties while trying to remove the broken key. Thanks so much for sharing!
Thank you 🙏🏻 We try to produce and publish consistent useful content as often as possible. Please consider subscribing to our channel, and if your interested, check out our other channel “UDROpreneur” thanks!
By a $6.00 feeler gauge set use +/-0.025 and grind down the height enough to slide on the sides of the keyway. Smear baking soda on the front of the cylinder and keyway.. Put a few drops of super glue on one side of the modified feeler gauge (key side) and slide into keyway and allow to set up. Remove key. You can also use old or broken picks if they're thin enough and you have some kickn' around.🔐
Broken picks are very useful.
Not if the super glue is at the tip of the tool (glue is facing the key side only?) The tool is slid in-between the keyway and broken key It will only makes contact to the key. Let setup and jiggle pull or zip it out. Whatever technique works best.
Good bless you man I just removed my broken key from my door!
Maybe I’ll try that one day. I just use the broken key to lock and unlock the door but I can’t make a spare so I guess I’ll need to make another key one of these days so I’ll dig it out. Thank you.
Yeah Bc if it gets pushed in even a millimeter it will stop working. I’d get it fixed sooner than later.
Good efforts and thanks for sharing !
Any tips on getting a wrong key in a lock that broke?
A mini file works great just insert under the broken key pry down until you've got grip and slide out. A paper clip with a hook bend at the end sometimes works too.apartment maintenance
Uriah hpc set; 2000 extractors can get a supplier .Fred shanfelt
Use a tiny flat head screwdriver, like what you find in an eyeglasses repair kit. Put the smallest bit of gel super glue, and touch it to the key. Count to 10 so it's dry, and pull out your key. Voila! I've used this method a few times and so far, it has always worked.
Oh my gosh thank you I watched ur vido it worked ❤thank u so much
Thanks for the instructional video from Denmark!
Never had a comment from Denmark lol
Howdy from Texas!
Thanks for the help
How did you lock it in here and unlock it?
Awesome thanks muchly dude👍 it works great
Thank you man ,that actually worked thanks.😁
thank you for video
Hi, my primary key, the whole end of it, broke off and the door is locked. Can you give me a hint how to get the broken part out and also how to open the lock? Thanks
I had my key break off in my car ignition and I have used a jigsaw blade. I filed it thinner and was able to get it up there and grab the teeth and pull it right out.
It would still start with a broken kit but that was a bad idea since anyone could get in and start the car lol
Your a genius 🎉👍🏽
Again, another great video and very informative as usual. 1 question 🙋🏽♂️- in a real life situation, are you able to adjust the door to a suitable angle like you did the practice device? Lol
Harry Adu lol to answer your question no but in a real life situation the lock will be mounted to a door making it sturdy, the only reason it was leaned back was to make it sturdy not to make it easier. Anytime we try to pick a lock or demo on a display it’s kinda frustrating bc it moves all over the place as you try to pick it or extract a key.
Good video, gave me some tips. I got a broken key out of a dead bolt. :-)
Thank you!!!!!!!!!!!!!!!!!!
Good thanks
Wondering what is your go to lock lube? Graphite? Ballistol? Something better??
We use Tri-Flow it’s fantastic!
Very challenging...difficult 😁😁😁
Thanx , it was very helpful 🤙
This comment is about a different video I watched on your channel. I’m subscribed. You referred to ‘Fundamentals of Master Keying’ by Jerome V. Andrews. I tried to buy the book but could not find it. We’ve just recently purchased a locksmith company up here in Ontario, Canada. Oddly enough, we don’t have to be licensed here to have a locksmith company. So I am unable to give a license number to another locksmith supplier in order to get this book. Can I purchase this book from you? We take over the company on the first of January 2025 so I would like to learn what I can now. Thanks.
Dennis
It's 2:40am and my key just broke in my lock. Hahahahahah
Me this morning
really usefull👌🏻
Had to extract a key from a Flagpole cam lock not long ago.. Was at our Local Fire station so I got my 10c tour afterwords, lol
Thanks!
Your welcome, please subscribe to our channel, we’d sure appreciate it! Thanks!
Glue sticks trim them down heat for 20 seconds leave for 20 secs pullout sometimes it takes like three tries 👊
We had someone tell us that the other day
I have used the old crazy glue, just dab a very small section of some thing poke it in and pull it out
cool
very helpful it worked
How can I getmy key lock the dore my key only go half way
Hi
If the keys is already in, couldn't you just open the door, disable the lock, and push it out from the back side?
I would have tried the hot glue trick. lol 🤪
Works if the key is close to the front but if it’s deep won’t work bc it will stick to the pins and cylinder. Thx for watching!
Just removed a broken key using a magnet. Worth a try
Toyota key is Not ferric- ie: not magnetic, no key I have will stick to a magnet!!?
Keys arnt magnetic though?
Keys are brass and not magnetizable.
Looked for close ups of tools. .. Not everyone knows this stuff. .. . .
I see y u punched get
no siga asiendo el ridiculo y consiga herramiemtas adecuada para sacar llaves.
Uhhhh ok lol
Thank you for not making it look easy.
Lol wanted to show how hard it actually could be but sometimes it’s easy and sometimes it can be a challenge lol
What about a whole key tho????!
Американский идиотизм. Вопрос решается за 3 секунды с помощью молотка и фомки.
Or you could just use a hot glue stick
Not if it is in deep!