Handy to find a video with the exact same model as mine. I’m just cleaning the jets now. But the main brass jet with all the holes like a flute is not blocked. Probably the smaller black plastic one
thank you, had to clean the carb, many helpful tips .. you had mentioned that you have info on making a gasket ?? can you provide the link ... many thanks
www.amazon.com/Universal-Hollow-Hole-Punch-11-Piece/dp/B07MCM5F5Q/ref=sr_1_58?crid=1ZM9TRDISOZK7&keywords=gasket+hole+punch+set&qid=1693340125&sprefix=gasket+hole+%2Caps%2C845&sr=8-58 This is the one I have. Thanks for watching
I have the same generator and I have clean both jets and I can only get it to start on choke then I flip it to run and it will not stay running. It has a new spark plug getting plenty of fire.
I just put a new carb on mine also and I see the governor return spring goes in the little hole the second one on the butterfly. But where does the other end go does it go in the same hole as the link rod or the hole next to it ? on the governor arm. I've looked everywhere online and I've seen it done 2 different ways and I'm wondering if I'm doing it right
You should put it back in the same hole that you took it out of, but I know no one remembers. You should be able to look at the old carb for wear in witch it was in. If not try one hole and if it does not sound right switch to the other hole.
Great explanation 👌 the idle jet info is real helpful 👍
Thanks
Handy to find a video with the exact same model as mine. I’m just cleaning the jets now. But the main brass jet with all the holes like a flute is not blocked. Probably the smaller black plastic one
Thank You Sir
thank you, had to clean the carb, many helpful tips .. you had mentioned that you have info on making a gasket ?? can you provide the link ... many thanks
www.amazon.com/Universal-Hollow-Hole-Punch-11-Piece/dp/B07MCM5F5Q/ref=sr_1_58?crid=1ZM9TRDISOZK7&keywords=gasket+hole+punch+set&qid=1693340125&sprefix=gasket+hole+%2Caps%2C845&sr=8-58
This is the one I have. Thanks for watching
I have the same generator and I have clean both jets and I can only get it to start on choke then I flip it to run and it will not stay running. It has a new spark plug getting plenty of fire.
Carb still clogged.
Gracias por tu explicacion tan detallada muy buen video amigo!!
Gracias.
I just put a new carb on mine also and I see the governor return spring goes in the little hole the second one on the butterfly. But where does the other end go does it go in the same hole as the link rod or the hole next to it ? on the governor arm. I've looked everywhere online and I've seen it done 2 different ways and I'm wondering if I'm doing it right
You should put it back in the same hole that you took it out of, but I know no one remembers. You should be able to look at the old carb for wear in witch it was in. If not try one hole and if it does not sound right switch to the other hole.
Ya I'm not sure what hole it goes in because the spring I got is new other one was old and fell off
@@nathanielstuckey3354 In my video the spring is in the second hole at the carb. On the other end I don not know.
@@TheGAutomotiveAndMore thanks for your help
Let me get my specialty screw driver, cones back with a regular screwdriver
Well it is the right size. You might not have it.