How to Make a Transparent Enclosure DC Motor | DIY Motor projects at home

This video guides you through the process of creating your own DC motor with a crystal-clear, transparent enclosure. The required materials include cardboard, plastic bottles, copper wire, permanent magnets, and iron parts. First, a circular rotor is constructed from cardboard. Then, a crystal-like transparent housing is fabricated using a plastic bottle. The rotor, wiring, and other components are carefully assembled inside the enclosure. Finally, when power is supplied, the motor runs smoothly, allowing you to marvel at its inner workings through the crystal-clear case. This is a fascinating DIY electronics project that combines functional engineering with a visually captivating design. It's perfect for those interested in electronics, electrical engineering, and unique DIY creations.
#diymotor #diyprojects #motor #dcmotor #diyproject #electricmotor

[@ponglai-o7u]

very nice 👍

[@Mr.ky89]

Homemade DC motor is very interesting

[@bongbong之奇趣實驗室-b6n]

Thanks for your reply, I will try to make a more efficient motor, this video will be coming soon.

[@davidwarda5616]

what is the voltage of the power supply that you are using?

[@davidwarda5616]

How many volts was the motor connected to? please answer and let me know, thanks.

[@bongbong之奇趣實驗室-b6n]

Thanks for your reply, In this test, a 5volts input was used, and it was also tested that it can be activated with a 3volts input.

[@davidwarda5616]

@@bongbong之奇趣實驗室-b6n You're welcome and no worries. an advice to make this faster is using less friction on the commutator and more conductive metal, like aluminum or copper. increasing voltage or current will increase speed.

[@davidwarda5616]

@@bongbong之奇趣實驗室-b6n here's an experiment for you: try sticking a small set of magnets in the shaft, create 2 coils, 1 for input and 1 for output, and then turn it on and finally stick a metal in between the output.

[@davidwarda5616]

@@bongbong之奇趣實驗室-b6n If magnets don't stick or fall out during spinning, I would recommend using super glue. if that does not work, put cardboard behind the magnets and now try the experiments. make sure you have many turns of wire as possible.

[@bongbong之奇趣實驗室-b6n]

@@davidwarda5616 Thank you for your suggestion. Indeed, this will be more efficient, but the purpose of this video is to create a motor using easily accessible materials. If the video becomes popular, I will make a more efficient motor.

[@debapratimmajumder9429]

can it run with 9v?

[@bongbong之奇趣實驗室-b6n]

Of course, I used 0.3mm copper wire, which has a higher voltage tolerance. However, since the motor is made from a plastic bottle, I considered heat dissipation and used 5V for testing.