Thanks for posting this solution, as I was unaware that there was any interest in the old DV tape formats nowadays! I still have a pristine VX2100 from back in the day, which sadly hasn't seen any activity since the demise of firewire connectivity into my laptop, and all the subsequent camera upgrades I've done over the years. I will be digging it out of the cupboard now, and looking into all the available recording options. One thing that I might look at after your comments, is using my Tascam DR10sg mic, or my Saramonic MixMic SR-H5M for the audio capture, and use the powerplay recording for syncing in post. Maybe there's still life in the old girl yet! :)
Really appreciate you putting this out. I have some old MINI DV Camcorders collecting dust in my drawer and I can always use more cameras, so thank you.
THANK YOU! I've just started snooping around Ebay trying to get myself a GL2 and had been watching your previous video on this topic. This is super helpful thank you!
for the 3.5mm audiojack not pushing in completely, it could be that either the cable or the unit have a different pin-order and it might be worth juggling them around. If all else fails, a normal audio cable from 3.5 to 2x RCA should do the trick as well
I’ve been filming with a ccd vx1e and have been first looking at circumnavigating using the np77 batteries and then onto tape less. So thank you for posting this. Also nice seeing some classic Boardroom footage!
Following on from this I’ve finally got my Vx1E np77 batteryless and tapeless. It’s a little on the bulky and ugly side but I don’t have to worry about battery’s anymore.
@@NEONAIRSHIP So for my day job I use fairly standard 12v dc li-ion batteries from eBay. My problem with original nicam batteries is theyre 20+ years old and barely hold a charge. So hacked a charger and old battery to house a dc input and buck regulator to take the voltage down to 6v. The batteries aren’t smart so this work fine. Using a Ezcap dvr which records in 1080. Have found using an upscaler greatly improves the quality. So have this on my rig aswell. I’m just putting the finishing touches to it and will make my own demonstration video along with captured Broom footage!
Inspired me to try my VX1000E with my ARCHOS AV 700 Mobile DVR. Both have S-Video so that's what I used. The ARCHOS records AVI files with MPEG-4 25 fps video at 512 X 384. Nice result, but maybe not so good for fast action.
The thing that will always stop me from trying this is the fact it's adding more compression, compared to importing it direct with no compression (well, no more compression then DV already has!)
Just means this way is slightly lower quality than using a firewire to capture, and it's already standard def so them pixels are at a premium. IMO it's good enough tho, you can see the difference in the comparison I did - I don't think anyone could tell once uploaded
Wow, so if this only requires AV to be plugged in it's most likely to work with any miniDV, HI8, VHS camera? I've got a good lot of cameras who would fancy one of these.
Quick question, if your camera cannot record onto tapes anymore, will it be able to record to this? Does the camera just need to be able to output signal to a monitor?
@@NEONAIRSHIP do you press record on the camera itself in standby mode? its not possible i guess so you can only record when recording on the powerplay right?
do you ever wonder about the quality loss not using the firewire out with this setup? from what I understand analog video out is quite a substantial drop in quality because of the redundant digital to analog conversion that has to happen for these cameras to output in analog out, guess there's a compromise you may have to make for the convenience of this setup
he showed the quality loss and compared to the other fpv dvr it was so marginal that firewire is only good if you already own the equipment as it costs a fortune nowadays secondhand
Question about framerates - what is the native framerate of one of these old cameras? I was always under the impression that since they use tape (25fps/29.97fps), that is what they film at, but then all these tapeless DVRs record at 60fps...? Not sure how that plays nice with old cameras, or with, say, converting VHS to digital. I'd appreciate any advice anyone might have!
They're interlaced so it's 60i in NTSC/50i in PAL - you're right in that not all the data is used, but the cheaper DVRs skip frames which means slow mo looks jank
Thanks for making this series! I've just gotten myself a GL2, and tried something along the lines of your first video. I'm having the same problem you pointed out at 3:58 . I wonder if it's just something to do with the GL2 or the ports on these Mini FPV DVRs. Wondering what your thoughts are!
@@NEONAIRSHIP Ah! I've found the solution to the problem. The manufacturer changed the layout of the 3.5mm jack and swapped the video line with the ground line. Now I'm getting a clean picture. Thanks for the tutorial!
@@cruzarnett6408 I'm using two 3.5mm to AV (Red yellow white), one with male AV cables, one with female AV cables. I matched the white to white, Red to Yellow, and Yellow to Red cables together, and it reads perfectly clean now (I have some example footage on my channel)
wondering how you were able to record the footage without all the information from the canon screen. Would love to know any tips on how to get rid of that information
Hey i have the camera camon mx2 and i tried to connect to my powerplay but it obly worls when i plug the yellow clinc into the red one and the white into white and the yellow one with the red one Can you please help me?
Thanks a lot! I use a Canon XM1 to film skating, this camcorder has just a combined A/V Connenctor (same as the DVR probably) should this work too with just a 3 point aux 3,5 mm cable or do you think I need something more specific?
Hee really liked the idea! Do you know how it comes you cant put the mini jack in all the way? I have a FXT DVR and it does exactly the same and find it sketchy that it won't record properly, especially when it comes to skateboarding... Is there a way to fix it or is it just the build quality from the cables or DVR? Thanks and cheers from the netherlands!
Yo this is sick man! Would you ever sell a full kit with all the parts included? I've been shooting on a HDR FX7, and too many times people have watched tapes back without fast-forwarding after and I've taped over shit 🤣
What do you think about using a standalone capture like clearclick with an external power? It seems like it would be easier to set up and maybe just as effective. I'm guessing there's a glaringly obvious reason I'm missing that people, yourself included, aren't already going that route. Thanks for all the info!!!
@@NEONAIRSHIP thanks! I think I'm going to pick up a powerplay and set it up like you have! I'm really excited to start playing with my gl2 again and not worry about the heads wearing out! Thanks again for this info! One last question. Do you think this is a good option for capturing video from my mini dv tapes?
@@NEONAIRSHIP just wanted to say thanks again for the info/help!!! I just got my powerplay in the mail, thanks to you! Super simple and easy to use. I'm really excited to play with my gl2 again! When I slow the video in premier to 50%, it almost looks as if the image vibrates up and down slightly. Any idea if this can be fixed? I'm hoping I can solve it by changing some timeline properties or something.
Hey man, yeah I think I know what you mean - it's a frame rate thing, try a few different timeline settings to get one that matches up and that will get rid of the jittering
Hi, I just got my power play dvr for my camera. When I put my micro sod card into my computer to capture my clips they are no longer in 4:3. Do you know how to change the frame on the Power play?
bro so i have a sony trv900 which only has a audio/video 3.5 jack. do u think i can get a 3.5 to female adapter that plugs into the immersion rc device and use it like that?
would you know how I would be able to use my samsung (OTG supported) as a video capture device? I used the eachiene prodvr and its a big hassle trying to use it and half the time the videos are corrupted.
Well I keep my AX100 4k which is starting to be almost collectible too True that for UA-cam broadcasting and viewing as many do on a 6" smartphone it is sufficient quality... On my 70" 4k TV it must be a disaster
Wut? You don't seem to get how any of it works, 4k is 4k is 4k. Even 100m wide 4k. AX100 is absolutely not collectible, neither is a VX1000 for that matter, but a VX1000 is "vintage", ie old, the AX100 will be in about 10-15yrs or so, maybe? The VX1000 and GL2 etc are "cool" because they were being used by a lot of "famous" skate video makers a long time ago, that's it. No other reason. I've shot short movies on a GL2, I currently own the "big brother" of it, Canon XHA1, and it's not really anything special.
@@NEONAIRSHIP God i hope so its so hard to find official manuals and specifications, worse case scenario I might just use firewire and try to perpetually record without tape inside
hey! mine came in today and i'm having trouble positioning the 3.5mm jack into the powerplay so that it 1. gets a non-glitchy video signal and 2. records audio. so far, i have to fidget with it to get one or the other. any tips?
Hey, I'm gonna make a video about this soon but it seems the the red and yellow AV signals are in the wrong order on the DVR. So you can either use some adapters to switch em or just plug into the other ports depending on your camera
OK in that case the easiest way is to get 2x 3.5mm to AV cables - one with female connectors and one with male. Then you can swap em round until its correct
Ah yeah I remember seeing that actually, I think it was out of stock at the time. Personally I like having the screen for reviewing clips but fxt can do that with a phone I think - might be a good option
@@NEONAIRSHIP I think both dvr are very interesting, sure the screen is a huge plus on a vx1000 ! Thanks for the infos, this is so much more compact than those hardrive capture devices!!
NEON AIRSHIP hey man just a quick one, i bought one and it’s recording fine with my vx2000 but it’s only recording a static sound for the audio, do you have any idea as to why?
It looks fine through the actual camera and noticeably dark on the power play. I thought it was just the display but the footage actually did look like what when I captured.
@@NEONAIRSHIP sounds good, because my dv out port is broken and thought I might have to get it fixed to use this. Also does it have a built in hdd or does it use an sd card
![Tapeless MiniDV Camcorder Part 3: PowerPlay Refinements [GL2 / VX1000]](http://i.ytimg.com/vi/CQSWkmyxBjM/mqdefault.jpg)
![Tapeless MiniDV Camcorder Part 3: PowerPlay Refinements [GL2 / VX1000]](/img/tr.png)
![The ImmersionRC PowerPlay Guide for Tapeless Camcorders [ VX1000 / GL2 / TRV900 etc ]](http://i.ytimg.com/vi/4Lz8nawVn2g/mqdefault.jpg)
Thanks for posting this solution, as I was unaware that there was any interest in the old DV tape formats nowadays! I still have a pristine VX2100 from back in the day, which sadly hasn't seen any activity since the demise of firewire connectivity into my laptop, and all the subsequent camera upgrades I've done over the years. I will be digging it out of the cupboard now, and looking into all the available recording options. One thing that I might look at after your comments, is using my Tascam DR10sg mic, or my Saramonic MixMic SR-H5M for the audio capture, and use the powerplay recording for syncing in post. Maybe there's still life in the old girl yet! :)
Really appreciate you putting this out. I have some old MINI DV Camcorders collecting dust in my drawer and I can always use more cameras, so thank you.
I've just ordered the Powerplay and I'm gonna test this out with my Canon XL2, cheers man.
@@carldiamond4234 do you have any camcorders you would sell to me
THANK YOU! I've just started snooping around Ebay trying to get myself a GL2 and had been watching your previous video on this topic. This is super helpful thank you!
for the 3.5mm audiojack not pushing in completely, it could be that either the cable or the unit have a different pin-order and it might be worth juggling them around. If all else fails, a normal audio cable from 3.5 to 2x RCA should do the trick as well
@ NEON AIRSHIP - THANK YOU. Do you know of any alternatives to the PowerPlay? They are sold out everywhere
I’ve been filming with a ccd vx1e and have been first looking at circumnavigating using the np77 batteries and then onto tape less. So thank you for posting this.
Also nice seeing some classic Boardroom footage!
Boardroom forever
@@NEONAIRSHIP I just got my powerplay dvr and cannot get a video signal. Have the RCA to 3.5 and it aint workin.
Following on from this I’ve finally got my Vx1E np77 batteryless and tapeless. It’s a little on the bulky and ugly side but I don’t have to worry about battery’s anymore.
Sounds cool! What are you using as the battery solution?
@@NEONAIRSHIP So for my day job I use fairly standard 12v dc li-ion batteries from eBay. My problem with original nicam batteries is theyre 20+ years old and barely hold a charge. So hacked a charger and old battery to house a dc input and buck regulator to take the voltage down to 6v. The batteries aren’t smart so this work fine. Using a Ezcap dvr which records in 1080. Have found using an upscaler greatly improves the quality. So have this on my rig aswell. I’m just putting the finishing touches to it and will make my own demonstration video along with captured Broom footage!
Inspired me to try my VX1000E with my ARCHOS AV 700 Mobile DVR. Both have S-Video so that's what I used. The ARCHOS records AVI files with MPEG-4 25 fps video at 512 X 384. Nice result, but maybe not so good for fast action.
So I guess we can’t do the fast forward glitch transition any more?
I have two gl2 and a mkii fisheye. This is so exciting. Thank you
Sound nice, gotta get supporters 4 u, this is an awesome idea to get stereo sound 🙌🏼🙌🏼
Any news on a stereo sound version
The thing that will always stop me from trying this is the fact it's adding more compression, compared to importing it direct with no compression (well, no more compression then DV already has!)
why is this bad. i dont know anything abt this
Just means this way is slightly lower quality than using a firewire to capture, and it's already standard def so them pixels are at a premium. IMO it's good enough tho, you can see the difference in the comparison I did - I don't think anyone could tell once uploaded
NEON AIRSHIP ah ok word
When will your BigCartel store be back online?
Have you tried the Acsoon SeeMo ? .. curious what u think Did u make the stereo one ?
Wow, so if this only requires AV to be plugged in it's most likely to work with any miniDV, HI8, VHS camera?
I've got a good lot of cameras who would fancy one of these.
Absolutely! I've been trying to get my hands on an older camera to try out but the ebay gods have not been on my side so far!
Quick question, if your camera cannot record onto tapes anymore, will it be able to record to this? Does the camera just need to be able to output signal to a monitor?
Yeah just needs the av output working, camera stays in standby
@@NEONAIRSHIP do you press record on the camera itself in standby mode? its not possible i guess so you can only record when recording on the powerplay right?
the immersion rc still shows the camera display like battery life ect when im filming how do i get rid of that in the videos
do you ever wonder about the quality loss not using the firewire out with this setup? from what I understand analog video out is quite a substantial drop in quality because of the redundant digital to analog conversion that has to happen for these cameras to output in analog out, guess there's a compromise you may have to make for the convenience of this setup
he showed the quality loss and compared to the other fpv dvr it was so marginal that firewire is only good if you already own the equipment as it costs a fortune nowadays secondhand
Question about framerates - what is the native framerate of one of these old cameras? I was always under the impression that since they use tape (25fps/29.97fps), that is what they film at, but then all these tapeless DVRs record at 60fps...? Not sure how that plays nice with old cameras, or with, say, converting VHS to digital. I'd appreciate any advice anyone might have!
They're interlaced so it's 60i in NTSC/50i in PAL - you're right in that not all the data is used, but the cheaper DVRs skip frames which means slow mo looks jank
I guess it's the best under the circumstances... Wondering, have you seen equipment like the ClearClick 3.0 DVR?
i wonder how this quality would compare to firewire on a dvd player like if you were making a full length skate video
Thanks for making this series! I've just gotten myself a GL2, and tried something along the lines of your first video. I'm having the same problem you pointed out at 3:58 . I wonder if it's just something to do with the GL2 or the ports on these Mini FPV DVRs. Wondering what your thoughts are!
I'm not sure but I think it might be the layout of the 3.5mm jack? TRS vs TRRS kinda thing. Different cable could potentially solve it
@@NEONAIRSHIP Ah! I've found the solution to the problem. The manufacturer changed the layout of the 3.5mm jack and swapped the video line with the ground line. Now I'm getting a clean picture. Thanks for the tutorial!
@@brianfromtheelluminaticoll8544 Im having this issue aswell. What did you do to solve it?
@@cruzarnett6408 I'm using two 3.5mm to AV (Red yellow white), one with male AV cables, one with female AV cables. I matched the white to white, Red to Yellow, and Yellow to Red cables together, and it reads perfectly clean now (I have some example footage on my channel)
@@brianfromtheelluminaticoll8544 can you make a video tutorial on that issue? plss
wondering how you were able to record the footage without all the information from the canon screen. Would love to know any tips on how to get rid of that information
No probs menu>disp set up > TV screen OFF
Does anyone know where I can get a short cable for the gl2 and Powerplay? Lost the original one :/
Hey i have the camera camon mx2 and i tried to connect to my powerplay but it obly worls when i plug the yellow clinc into the red one and the white into white and the yellow one with the red one
Can you please help me?
Thanks a lot! I use a Canon XM1 to film skating, this camcorder has just a combined A/V Connenctor (same as the DVR probably) should this work too with just a 3 point aux 3,5 mm cable or do you think I need something more specific?
Nah XM1 works exactly the same :)
@@NEONAIRSHIP So with just 3,5 mm aux? It has no 3 point rca video just one combined av.
Yep same as the GL2 in the video
@@NEONAIRSHIP Thanks a lot!
How can I interpret the footage to use d1/d2 pixels? Is there a way to do it with iMovie?
I only use premiere so not sure sorry
Okay no worries. Would you say it’s necessary to interpret the footage into d1/d2 pixels.
I think it only matters if its a HD timeline, if you make a DV project should be all gucci. It just stretches it slightly if it's square pixels
are these ever going to be back in stock
I have a canon gl2 what wire should I get to connect a immersion dvr
Hee really liked the idea! Do you know how it comes you cant put the mini jack in all the way? I have a FXT DVR and it does exactly the same and find it sketchy that it won't record properly, especially when it comes to skateboarding... Is there a way to fix it or is it just the build quality from the cables or DVR? Thanks and cheers from the netherlands!
Hey, I'm gonna make a video about this hopefully this week. In the meantime, take a look through the comments here there's a couple solutions posted
@Remco Groot does your solution with the FXT DVR work? I tried to connect it to a SONY VX 2000 but the DVR doesn't record at all!
If we are going to get a stereo version can we also add FireWire?!
svideo out from cam into black magic analog to sdi converter then record on atamos shogun in cinema dng raw :)
Do I need to buy any add on for this I have a Sony hdr fx7
Filled out the google form really interesting!!
Yo this is sick man! Would you ever sell a full kit with all the parts included? I've been shooting on a HDR FX7, and too many times people have watched tapes back without fast-forwarding after and I've taped over shit 🤣
Lol been there! Maybe one day, been trying to work with immersionrc directly but not much luck so far
What do you think about using a standalone capture like clearclick with an external power? It seems like it would be easier to set up and maybe just as effective. I'm guessing there's a glaringly obvious reason I'm missing that people, yourself included, aren't already going that route. Thanks for all the info!!!
Yeah you could but it'll be mjpeg 30fps like the eachine example in the video and not much cheaper
@@NEONAIRSHIP thanks! I think I'm going to pick up a powerplay and set it up like you have! I'm really excited to start playing with my gl2 again and not worry about the heads wearing out! Thanks again for this info! One last question. Do you think this is a good option for capturing video from my mini dv tapes?
Awesome, yeah works great for capturing tapes
@@NEONAIRSHIP just wanted to say thanks again for the info/help!!! I just got my powerplay in the mail, thanks to you! Super simple and easy to use. I'm really excited to play with my gl2 again! When I slow the video in premier to 50%, it almost looks as if the image vibrates up and down slightly. Any idea if this can be fixed? I'm hoping I can solve it by changing some timeline properties or something.
Hey man, yeah I think I know what you mean - it's a frame rate thing, try a few different timeline settings to get one that matches up and that will get rid of the jittering
Hi, I just got my power play dvr for my camera. When I put my micro sod card into my computer to capture my clips they are no longer in 4:3. Do you know how to change the frame on the Power play?
Set the pixel ratio to D1/DV in your video editing software
@@NEONAIRSHIP alright thanks! You saved me from getting rid of my trv900 by making this video!
bro so i have a sony trv900 which only has a audio/video 3.5 jack. do u think i can get a 3.5 to female adapter that plugs into the immersion rc device and use it like that?
It's the same connection as the GL2 in the video, you can use the included cable
@@NEONAIRSHIP thank you! i didn’t see that at first
Do you need a tape inside the camera for it to record ?
No it's better to run without a tape
does the videos save to the power play on its own? or does it have a slot to put in a memory card inside
MicroSD card
What fish eye you run on gl1 bought a optika 0.3 and it won’t screw on made sure it was gl1 compatible before I purchased
what is the filter thread on your fisheye? you probably just need a step-up/step-down ring
@@NEONAIRSHIP titanium series 0.3X
Yeah but which one? 37mm, 58mm, 62mm? GL1 is 58mm so anything else will need an adapter
@@NEONAIRSHIP 58.8mm
@@NEONAIRSHIP the size of it
would you know how I would be able to use my samsung (OTG supported) as a video capture device? I used the eachiene prodvr and its a big hassle trying to use it and half the time the videos are corrupted.
You could try the easycap card and an otg adapter, other people have got that working but it didn't work for me
@@NEONAIRSHIP would you know who has done it so i can ask them what adapters they used and everything?
I've just seen it done by fpv guys try searching something like 'fpv dvr otg phone'
Well I keep my AX100 4k which is starting to be almost collectible too
True that for UA-cam broadcasting and viewing as many do on a 6" smartphone it is sufficient quality... On my 70" 4k TV it must be a disaster
Wut? You don't seem to get how any of it works, 4k is 4k is 4k. Even 100m wide 4k. AX100 is absolutely not collectible, neither is a VX1000 for that matter, but a VX1000 is "vintage", ie old, the AX100 will be in about 10-15yrs or so, maybe? The VX1000 and GL2 etc are "cool" because they were being used by a lot of "famous" skate video makers a long time ago, that's it. No other reason. I've shot short movies on a GL2, I currently own the "big brother" of it, Canon XHA1, and it's not really anything special.
Can I do this mod with a vhs or hi8 camcorder? Thanks
Yeah so long as it has an AV out! Been meaning to try it myself
Hey, does it work only with vx1000/gl2 or with every mini dv working cameras ?
Anything with an AV port 👍
Thanks for the incredibly helpful video!!
I was wondering if you knew if this would work with a canon XL1s
Yeah I think so, if I remember right it has the full size AV connections like the VX right?
@@NEONAIRSHIP God i hope so its so hard to find official manuals and specifications, worse case scenario I might just use firewire and try to perpetually record without tape inside
@@MananaMan I'm gonna test it out on my Canon XL2, will report back.
@@carldiamond4234 did it work?
@@scoobyrex247 yes it did!
Can you still use the camera as normal? Setting? Zoom? Focus? If this is installed
Yep it basically acts like a monitor, so the camera works as normal. You just press record on the dvr rather than the camera
I have a Gl1 on the way so will it work with that?
Yup!
Does the Powerplay DVR also work with a PanasonicDVX100b?
Yep! Great camera! Connections are the same as a VX
@@NEONAIRSHIP Great, thank you! btw very good video :)
Will this work on a Sony hdr fx7
Hello, are the 18500 batteries included when you buy it ?
Hey, no mine came without batteries
@@NEONAIRSHIP okay thanks ;)
Out of interest, will this work with the canon XM2??
Yup it's an Xm2 in the video, I just call it a Gl2 as thats what it was released as in the US
so you don't need to use mini DV's when you use this thing?
Correct
hey! mine came in today and i'm having trouble positioning the 3.5mm jack into the powerplay so that it 1. gets a non-glitchy video signal and 2. records audio. so far, i have to fidget with it to get one or the other. any tips?
Hey, I'm gonna make a video about this soon but it seems the the red and yellow AV signals are in the wrong order on the DVR. So you can either use some adapters to switch em or just plug into the other ports depending on your camera
@@NEONAIRSHIP i have a TRV900, so i'm using the 3.5mm AV jack. what would you recommend for an adapter?
OK in that case the easiest way is to get 2x 3.5mm to AV cables - one with female connectors and one with male. Then you can swap em round until its correct
@@NEONAIRSHIP hey, do you mind linking the cables you would use just so i know i am ordering the right stuff
@@kain6473 amzn.to/3amPQ8F + amzn.to/3oVfXaD
What plugs should I use for a gl1
I think it's the same as GL2 so the included cable should work
does the powerplay ship to the us?
Yep
How do you delete clips?
Not sure if you can on the powerplay itself, I just sort em out on the pc
also you deserve more subs
Is this the only 60fps dvr with a display on the market ?
As far as I know yeah
@@NEONAIRSHIP i just came across the fxt dvr. No screen, but seems to also capture 60fps h.264. Looks like it could work, also less bulky ?
Ah yeah I remember seeing that actually, I think it was out of stock at the time. Personally I like having the screen for reviewing clips but fxt can do that with a phone I think - might be a good option
@@NEONAIRSHIP I think both dvr are very interesting, sure the screen is a huge plus on a vx1000 ! Thanks for the infos, this is so much more compact than those hardrive capture devices!!
@@NEONAIRSHIP the screen would be so clutch filming fisheye with the vx
does this work with a gl1?
Yep 👍
will this work on a vx2000 too?
Yeah man, pretty much any mini dv cam
@@NEONAIRSHIP amazing! thank u so much you've just saved me from so much stress with this video, absolute legend
NEON AIRSHIP hey man just a quick one, i bought one and it’s recording fine with my vx2000 but it’s only recording a static sound for the audio, do you have any idea as to why?
Cable might be wired differently, try plugging the red into the white and vice versa?
Otherwise there might be some output settings to play with in the menu but been a long time since I touched a vx2k - I'm sure there will be a way
I have a Sony hdr fx7 will it work on it?
Yeah but you'll get better quality recording into a phone like this ua-cam.com/video/PZLEUOG9k4Y/v-deo.html
@@NEONAIRSHIP the video you sent me the link to work on my camera? cuz my take mini dv tapes
Yeah because it has a HDMI port
@@NEONAIRSHIP ok thank you 🙏
@@NEONAIRSHIP I do have a iPhone will it still work?
Anyone else have really dark footage? On vx1000
It looks fine through the actual camera and noticeably dark on the power play. I thought it was just the display but the footage actually did look like what when I captured.
Thanks for saving me 300 euros 😀
I just ordered an eachine pro dvr yesterday god dammit
haha sorry mate
works on sony dcr-pc100e ?
can it work with the gl1?
will this work with a sony TRV900e?
yes
Does this require the DV out port on my canon xm2 to be working
Nope just the av ports, you can plug it into a TV to check
@@NEONAIRSHIP sounds good, because my dv out port is broken and thought I might have to get it fixed to use this. Also does it have a built in hdd or does it use an sd card
I just read the description were you mentioned it uses micro sd cards. Think I’m going to have to purchase this