Laptop Power Button Ribbon Cable
Вставка
- Опубліковано 11 гру 2024
- Reverse 20-pin, 0.5-mm-pitch Amazon Link: amzn.to/3KXvwLX
Reverse 9 Pin 0.5mm Pitch 200mm, B-Type FFC FPC Amazon Link: amzn.to/3xtaDoX
Forward 40 Pin 0.5mm Pitch (A-Type) 200MM FCC Amazon Link : amzn.to/4bk90b5
Forward 30 Pin 0.5mm Pitch (A-Type) 200MM FCC Amazon Link : amzn.to/3KY6WKZ
Forward 26 Pin 1mm Pitch 200MM Length A-Type FFC FPC Amazon Link: amzn.to/3xwoCdw
Reverse 17 Pin 1mm Pitch 200MM Length B-Type FFC FPC Amazon Link: amzn.to/4bhzgCD
Make your broken laptop Power button, Front panel , Mouse pad Ribbon cable..
www.arieslaptoptraining.com
thanks a lot man..u make my day..a friend asks me to clean the fan of his laptop, but accidentally i ruined the cable, for the touchpad and power button. i have a replacement for the touchpad, but i dont have one for the power button. i use your technique to fix it.brilliant.nice one man. regards from malaysia :)
dude!!!! honestly, one of the best tutorials i have ever seen in youtube....you just saved me big bucks....i was going to take my laptop to get my power button and mouse buttons ribbons messed up like in this tutorial and thanks to you now i can fix them myself....thank you so very much.....
Super Clever sir. You just saved my Alienware laptop. Take care.
Nice work... Extremely useful when you don't get apropriate cable, just modify available one
I HATE ribbon cable. I break out in a cold sweat when I see the stuff,
and if it smells fear, ribbon cable vaporizes into dust instantly. it
also self destructs if it is: exposed to air, deprived of oxygen,
exposed to sunlight, moonlight, or darkness, the oils in skin, latex
gloves, and optimism. so i find myself trying to work on electronics
calmly, wearing leather driving gloves, during a 16 minute period at
twilight and without looking at what im doing. You sir, are my HERO
Best.comment.EVER!
I freakin feel your agony
Dude the flex razor trick liked to knocked me on the floor when I saw you do that in 2 seconds I spent like half the day yesterday with a hard razor and ruined a whole damn ribbon trying to strip the damn thing every freaking time I would almost have it striped one of the stupid copper pieces would break. Just seeing you do that trick was worth seeing the video thanks Sir.
You saved my day sir. I had a hp pavilion dv5, which has quick launch touch button and have 9 pin flex connector, what i do is I had a old canon printer which has more flex connectors in cartridge side, i cut a 12 cms and done with this tutorial. And done. Now I m happy
Thanks 🙏😊
Thanks Patel Bhai. It's very knowladgable to be.. actually my laptop's ribbon cable about to brake.. i was thinking to anyhow fix it ....this vido helped me a lot..
Great video, there was a lot of fiddly work done there but your camera work was excellent, a lot of times when people do videos like this you miss the fiddly bits that are crucial. Well done you.
Thanks.
@@HarshadPatel can I made it up ,coz I cant do that
I m going to trash my expensive laptop to buy new one just watch this video and saved big amount thanks buddy
Thanks man..You are GODLY genius..I didn't expect that the strip ribbon can be cut open
thankyou so much for this tutorial, I fixed my JBL bluetooth speaker, the power FFC cable was damaged and did not found that cable anywhere, and there is no proper service centers for the JBL speakers, I managed to open the speaker and got stuck with the cable, it was only a small issue, but I am unable to switch on the speaker, I thought my 10,000 rupeas speaker is gone to the dustbin... never thought I could fix my speaker.. seeing your tutorial i fixed the cable and the speaker works great now!.. amazing!
आपका बहुत बहुत धन्यवाद् पटेल साहब।
मेरे पास hp का 1515 है और बार बार खोलने के कारण उसका पावर कीपैड वाला रिबन केबल बिलकुल खराब हो गया था, आज में प्रिंटर को कबाड़े में फेंकने वाला था लेकिन आपके इस वीडियो ने मेरे प्रिंटर को नया जीवन दिया है। और मैं अच्छे से उसका रिबन केबल ठीक कर पाया।
आपका दिल से धन्यवाद्। 🙏🙏🙏
it's my pleasure,🙏😊
Man, you just saved my laptop. 10/10
Great Video ! I'm going to give it a try but first I'll need to prepare an excuse in case I have to go to the ER. I got queasy watching you work that razor. Well Done !
அருமை! பிரமாதம்! எனக்கு தீர்வு கிடைத்தது.நன்றி! நண்பனே...
Wonderful. Looks like an easy job but not! Good job.
Bhai bht badia meri bhi touchpad kk cable kharb hui thi.
Thanks i learned alot from this video. You made my work very easy.
Am going to execute it into reality..
I hope it works...
thanks brother!.. you just saved my printer!
Procedure worked like a charm. I was doing in a wrong way. Thanks
Eres todo un artista. Gracias por enseñar a tanta gente de no sabemos.
Macgyver, bra the things I see you guys do is amazing. Here I am scratching my head trying to figure out "how" along comes the master🤙
thank you worked on a sony vaio pcg-9201 i used the same damaged cable cut off the damaged area with a scissors. I didn`t have a flexible blade so i used a straight razor using the point i scraped off each pin slowly untill all the plastic was removed, just don`t cut it too short because the sony vaio needs more ribbon cable to move the power button into place thanks again
This has just saved me a lot of hassle and money thank you.
Nice work there Harshad, I going to give this a go myself.
Sir, I'm a huge fan of your way of explaining this stuff.
Specially that LCD and led circuits.
Matlab koi Nasamajh bhi samajh jaye.
Sir, Since a month I am trying to learn something which is 3 Volt and 5 volt circuit. i.e. Voltage regulator.
I have watched some videos where I am not getting the perfect idea to diagnose the problem.
Specially when Coil Shows "Short' in circuit.
Will you please upload a video regarding Regulator and it's detail to repair boards.
Hats off to your work. :)
+Sachin Gotekar Thanks for appreciating my videos.. You need to understand all theory with proper way .. And for that you should attend my online video class training... Contact at arieslaptop@yahoo.com
Www.arieslaptoptraining.com
Harshad Patel sir do you live in the us? so i could buy a cable for my laptop
we are located in india
Harshad Patel but sir can you send it to my location
+PLATINUM GAMING where ?
Fix my problem amazing video thank you soooo much u save my leptop 😭😭
Chip prophylaxis and from 2 end batery point 1 and three batery to suplies.
Ribon connection repairing technic nice and fix Thanks for tutorial video....
Excellent . Just the thing that i need. The thing is that i messed up my touchpad ribbon cable, and the question is because i can not find E315127 20696 cable,can i use some other mark of cable as long it is on 30V? It is for Asus G55V.Any advice i would appreciate.
Very very helpful videos....Love your stuff..
Respected Sir. superb video . thnx a lot. aapne jo ye tape wala glue use kiya h wo kaise avilable ho payega pz.
Any book stall .. ask for double side gum tape
THANKS VERY MUCHS! From VENEZUELA!
Excuse me what cutting surface do you use, because on my table one catches and one doesn't.
Thank you!
Excelente amigo, muchas gracias, me ayudó muchísimo. Éxitos
Is it okay to use only soldering iron and without the flux? I don't have any alternatives
Great Job. Salute you
👍
Thanks very Helpful . Very Nice job
Hiya,good video.I noticed alot of boards dont have a good retention system.Almost Impossible to repair.Thanks.
Excellent exemple, merci pour cette belle leçon !
Buen Vídeo. Muy útil. Excelentes ideas, me ha servido mucho. Gracias.
Hi, I replaced my power button ribbon but after that my laptop keyboard is behaving strange like some keys acting as power button. If I remove the flex cable its works fine. Any suggestion/solution?
excelente video solo falta el audio y manos a la obra gracias tio
Very Helpful tutorial video. Thank you Sir.
Hey it would be nice to include how you did it, how you knew the right place to cut, what tools used in video.
I know some things about how to pick the right cable.
You are a easy to see but hard to understand person.
+energybot its a practice work 😊
what tools did you use and where did you get them from Harshad Patel.
yESSS! I FOLLOWED INSTRUCTIONS And THING WENT SMOOTH AND MY LAPTOP POWERED ON!! OMGG
Keiivyy S-P dats what I like to see and learn. God bless
Excellent work, Thanks a lot and God Bless you.
Thanks for your wishes
Agar ye power Vali wire new buy karni ho to mil jati hai kya ? Ya repair shop se new dalva sakte hai ye power Vali wire plz tell me ?
Yes .. mil jaati hai
One thre the conections two the wire batery
Where can I get that blue plastic thingy? It seems necessary for the cable
Hi I accidentally ripped out the part where that goes like to clip do you have any suggestions to put it back in or fix it thanks for reading great video
Hi Harshad... great video and very helpful. Do you sell this belt? I want to buy 6 it. Please let me know where can I contact you.
9998042319 whatsapp
Brilliant tutorial. Thank you so much.
Thanks alot, it saved my time and money.
Good video to solve problem
I need to put a flat 6 pin female connector on ribbon of this type. Is there an exact name for this connector? Where can I find one?
Thanks a lot, it is great!!, please help, how can I get such a ribbon cable?
Can you just solder broken cable points to power button board?
Glue holding in place & don't want to rip ribbon off if no need.
Also, what is the greyish stuff brushed on & after soldering?
Many thanks. Great video.
Blnd_E hold cable on pad and use nice clean solder tip for solder it ...with brush use flux
Sir what tape is that white tape you used to stick blue strip on white??
Double side glue tape
sir any link to buy the same ??
you can buy it from tv spare part shop , ask them for home dvd lens cable 0.5mm and cd player lens cable 1mm
thanks bro.... fixed the cable using double stick glue tape... thanks a lot
Master at his job.
Name the tape used
You have to answer it even year after professor.habib
Very good "how to do", great job, thanks for share.
Nice and helpful video. great Job.
Muy util he impresindible ese interesante video ara solucionar muchos pero muchos problemas EXCELENTE.
Chip and osaka tape
Q 1 and 3 jumpers to connector poles
Great work man
Helped me a lot
the ribbon labelled "1mm fcc cable" has number printed on it which is "20624 which is same as the ribbon on my HP G62 power button ribbon. I got ribbon with same number but pins are much smaller then my G62 power button, I also had 2 strips of another ribbon with the number "2896" written on them but the pins/wires match the same size as my power button. My question is if I am able to use that ribbon with the numbers "2896" that match wires/pins as my broken power button and would it would?
Hi great video . I was hoping that some how I can buy a ribbon cable from you . Do you sell ribbon cables internationally?
What is the name of the tape he used to stick that blue part?
It's double side glue tape
14:12 What is that jel you applied with brush? Please tell me
it's a BGA Flux
@@HarshadPatel thank you very much.
Amazingly, exceptional tutorial!
You spent a glue before and after "weld"? What kind of glue is this?
Thanks in advance!
you are a genious mr thanks!
No Words to Say..!! , Great !
Patel ji kya aap bta sakte hai ki sold krte waqt jo glue use kiya tha uska naam kya hai aur kha milega its urgent
nice creativity and helpful in rehabilitation process.......
salvaste mi pc
Thanks sir🙏🙏🙏🙏🙏
Please tell What the size of ribbon cable used for switch....
how to solder the power jack socket amd wire cable. the model of the laptop is SONY VIAO PCG-31311W
Perfect 💕
so useful for me 😉
nice ,i need to know name of material use it by brush in last stage please
Excellent, Thanks for all.
exelente trabajo... felicitaciones
what did you use to connect the ribbon cable to the power button
bro please tell me the pitch of cable which is used
0.5mm pitch and 1mm pitch
Sir can u please tell me the dimensions of ribbon cable used in HTR3 Sony home theater...please
Nice video thanks.
thank you soo mutch!!! i have bougth a to big sice cable and i cut a couple of pins of and it works(if i didnt see this i would have trowen it away)
Thanks a lot!! this video really helped me
FIRST INDIAN I SAW THAT MUCH TALENTED BETTER THAN AMERICANS
Eres un experto amigo.. felicidades.. xd
Which kind of cellotape is used to join the blue part with cable
double side glue tape
Hello brother. I was told these cables need to be specially made and would cost around Rs.1500 for two, one for power button and one for trackpad. And, a similar looking wire cost around Rs. 60 each online. And is there any need of checking ratings of the wire?
Excellent video ever! Great lesson on making ribbon cables. Keep upload good work. Regards,
Thanks, a very informative video.
how much it shall cost for power button ribbon cable and touch pad ribbon cable of dell xps l501x laptop that are beneath keyboard.
can I do soldering without that liquid that you use?
it's a flux
fantastic!! super work! can u make subtitles (english?)