Aluminum Subframe Episode 2 GasGas edition
Вставка
- Опубліковано 4 лют 2025
- This is a video about the process of installing an aluminum subframe onto the 2021 Husqvarna TE 300i. This may work for similar Husqvarna models. The part numbers are listed towards the end along with some step by step instructions. In this video I use the 2021 GasGas EC 300 parts. In my first video I used KTM 300 XCW parts to do the same aluminum subframe installation. All the parts bolt right up. Enjoy!
-
-
-
-
#husqvarna #te300i #ktm #300cc #gasgas #ec300 #aluminumsubframe
#carboncomposite #brokensubframe
Just looped my new 23 husky fe450, gonna try to use JB weld plastic version to put back on those little ears... it says it bonds great to carbon fiber composite blends so should do the trick... i ordered a new subframe, fender the whole thing hopefully I wont have to use them for a good while or even better, forever. Worse comes to worse ill fall back on this video
Welcome over to the red side of the family!
Lol it’s a gray area 😂
Hot dayum there's a part two! Moment I finish off the subframe on my 21 FE350, this is exactly what's happening to it.
You sir are a treasure to the community of Orange KoolAid drinkers.
Thank you @ElectronNinja
I just destroyed the whole rear of my fe350s, thanks to this video I'm swapping it to aluminum.
This is awesome, and very helpful. Just looped my 23 fe350s, and have a gasgas ec300 to use for test fitting. Couldn't believe the exhaust and everything lined up! Parts have been ordered, so now i just have to wait. Who made your graphics kit? It looks awesome.
Thanks bro I’m glad this could help you. The graphics I got from OMX graphics.
@@watchthepipe Awesome! I ordered a set today.
Thanks for posting this! Do you think you could have gotten away with using the husky gas tank and front fairings??
Hi @phil9022 good question! The Husky gas tank and front fairings have a different shape and will not fit with the GasGas air box in the stock shape. But it may be possible with some modifications. I can send you pictures of this if you would like
Thank you for this video!! I will be doing the same conversion & you saved me so much time. What type/name skid plate with linkage guard is on this bike?
Hi Rocci, I’m glad this helped you my friend! The skid plate with linkage I use is AXP Racing HDPE brand. There are a few other brands with a similar designs
Thanks, Forgot to ask who did your graphics kit, they are perfect. @@watchthepipe
@@roccicicatello3 I used OMX Graphics for this graphics kit. They did a great job and I’m very happy with the experience I’ve had with them.
Would this work for 2018 te250?
I’m not sure, if you had a friend with a 2018 KTM XCW or a GasGas EC 300 you could try it. Not many people have performed this parts swap/installation. The internet is coming up empty on this subject
I found out it does work. Any ktm 16-18 2 or 4 stroke subframe will fit.
@@trevorwallace3oh that’s great news! Thanks for your help in researching this!
@destroyer-kk8kw
I’m going to try this to my 2023 te300 and if it works I’ll put one on the 23 fe450 if I ever loop it
@@Donny538 very cool bro! Feel free to reach out to me if you have any questions I can answer!1
@@watchthepipe when you did it with the xc-w subframe was any other part’s different? Do you think I could use ktm parts to turn the husky into a semi ktm as I love the look of them more then husky
@@Donny538 I made a different video showing the parts that would need to be swapped with the KTM XCW 300 to install the aluminum subframe
@@Donny538 Yes, the conversion is not only possible but it is simple with the correct parts. You will not be able to use your Husky fuel tank or seat. The only hard part is the $$$ it cost... but so worth it. I did a 2021 FE350s using the KTM/GASGAS Aluminum sub-frame & all GAS GAS plastics, seat, tank & hardware. Watchthepipe lists the parts needed & I raise my glass & toast him for starting this make over!! You can use either KTM or GASGAS components but you must choose only 1 direction, I chose GASGAS option because KTM or Acerbis/Polisport did not make a white or gray plastic KTM kit. GAS GAS had White or Gray plastic kits so I went with White plastics & a custom designed graphics kit for GASGAS plastics but with Husqvarna logos, just like in this video. Your Husky can be magically transformed into a Hybrid.