Yamaha 225 Powerhead Removal | How to Remove a Yamaha Powerhead | Boats.net
Вставка
- Опубліковано 27 чер 2019
- See how to remove the powerhead on a Yamaha outboard in this video from Boats.net. We’ve already done a little work on this engine, including a couple of tests that told us that this outboard was in trouble.
See the Yamaha 225 compression test: • How to Compression Tes...
See the Yamaha outboard leakdown test: • Yamaha Outboard Leak D...
The Yamaha outboard powerhead removal process starts by disconnecting the battery. Then we’ll work on removing and/or disconnecting the fuel and electrical systems. Our outboard is on a stand, but if yours is still installed on your boat, you’ll need to also disconnect the fuel line. With that out of the way, we’ll remove the outer covers and attack the powerhead mounting bolts.
Once unbolted, we’ll lift the powerhead off of the upper casing.
See where we’re working in this F225 outboard upper casing diagram:
www.boats.net/...
Yamaha 225 bottom cowling diagram:
www.boats.net/...
Read how to do this job step by step: www.boats.net/...
VIDEO HIGHLIGHTS:
Disconnecting fuel and electrical systems - 1:05
Removing outer apron covers - 2:55
Unbolting the powerhead - 4:00
Lifting the powerhead - 5:20
Find Yamaha outboard parts here: www.boats.net/...
Talk to us:
Twitter: / boatsnet
Facebook: / boats.net
Instagram: / boatsnet
In the video we’re working with a Yamaha F225 outboard motor, but you may have similar steps for your Yamaha outboard. If you’re not sure whether these steps apply to your motor, leave a comment and we’ll get back to you.
RELATED VIDEOS
Yamaha 225 input shaft seal replacement:
• Yamaha F225 Input Shaf...
Yamaha 225 output shaft seal replacement:
• Yamaha F225 Prop Shaft... - Авто та транспорт
Sooooo good! Thank you, and I’ll always buy from you because of your great content!
These videos are great. Can you please do a series on the HPDI 250 or 300? There is plenty of them with blow pistons around. :(
What power head stand and adaptor do you use?
Took my midsection off this evening only to discover the corrosion is worse on the powerhead than it is on the midsection. Is there any option to repair the corrosion on the block?
How can I get John Tally to rebuild my outboards?
Love your videos tips and instructions. Do you know if the powerhead and mid section from the F225 fit into the F250? Thanks
I would like to see how to repair the power tilt and trim on the Yamaha 225
Do you have to drain all the oil and stuff out of it prior to removing the powerhead?
Hi, I bought two 2003 Yamaha 200hp motors I was told one had small corrosion on the exhaust, called a local mechanic shop and they stated if the corrosion got to the power head the motor was done for. My question is how do I know if the power head is damaged by corrosion? Is it true you can’t put it back together if there is corrosion in the power head ?
What was the repair for the corrosion at the bottom of the powerhead? Replacement part or new powerhead?
Did you ever get a response? Took my midsection off tonight, the corrosion is worse on the powerhead than it is on the midsection.
my steering arm bracket broke due to rot on my 1996 yamaha 200 hp v6 outboard does powerhead need to come off to replace
On a 225 Yamaha the lifters caps fill out how do I put them back in the right
How do you disconnect the water pilot line? (Last step in manual before hoisting)
We’re going to do this and this and this…..use your imagination lol