Thanks for mentioning our HDB BTO is not hard-wired...im searching for a comoatible transformer/ power plug for my TP Link Tapo D235...any pointers/ links u can provide?
@iwaderiwadi5068 wah cheem a bit hard to explain in a video cos I don't have a setup to demo. I'm not sure the capacity of the wires. But since there are 2 I'm sure they can carry a low voltage ac or dc
Hi when I use the plier to test the connector, there's isn't any sound on the bell, but there's sparks, same layout as yours, top and bottom left row. Is my bell spoil?
Thanks for the speedy replies bro! No wonder I thought my connection was wrong all along. May I know where did u get this bell, as mine looks exactly same as yours
So all wired doorbell needs a battery, right? How long does the battery last? Nowadays there's doorbell that doesn't require battery. Just plugged into power socket. Are they good?
Thanks for the vid. Was looking at this traditional door bell n reusing the given existing hdb door bell switch instead of the current digital ones with transmitter. Is it possible to use strong tape instead of drilling? Do i hv to do anything to the switch outside?
Great video! Very informative for people to do simple diy. Suggesting to do a water heater wiring check video?? ( i dont recommend novice doing the change themselves but how to check if everything is in order) I believe it will be very informative for the general public especially after the report on the water heater incident.
Jordan Bro, (i'm from SG Home DIY fb group - the one who said you must say when you're joking), why must Doorbell Receiver be mounted near ceiling? I saw my Britz Doorbell manual said must be 1.8metres high, but no reason given. Can I connect 2 wires to extend it to much lower height, so that I can see it clearly to troubleshoot? I guess battery contact points turned rusty after many years, need to clean. Any special way to connect the wires? Many Thanks!
Hello! That's a funny instruction! I have one doorbell hidden under a foot cabinet and it still works! And yes you can bring the doorbell down but I have changed my batteries once every 3 years so there is no reason you need to have it so low. Remember 3 years ago? That's when we were all locked down
@@ThePunggolHandyMan Ok great! Then, how to connect the extension wires ~ buy any type of wire connectors? Just find any 2 wires & just connect? Sorry i can't find anyone actually did such an extension, so must ask you for expert advice. Many thanks for your quick reply, Jordan Bro!
Noob question, but I am having trouble finding an analog/mechanical doorbell for my place. Tried online and also a few hardware stores already. Can you please share where you got yours? Appreciate the help.
Do you have anyone or video about fixing the HDB doorbell switch, next to the gate door...I notice that diy shops sell their switch size slightly smaller than the actual one that HDB provide...Do you know where we can get the one originally from HDB BTO flat door bell switch?
Hi. I already installed the doorbell inside kitchen. Tested and works fine. But the doorbell switch outside gate just doesnt work when pressed. What is the cause?
Just to check with u I wish to remove my HDB door bell and swap to a light bulb for my prayer alter and make the on/off switch inside my house .is it possible for me to use the door bell wire cables?
Bro, my door sudden do not work. Suspect could be the door bell problem, after changed new but still do not work. So I changed the switch outside my gate also, but still do not work. What do you suspect and advise? Thanks!
ah...so that the mystery small circular white cover. HDB Virtual Tour cannot zoom in enough to see the label. OK! will get a Wired Door Bell before Key collection! thanks!
Not really lol! But the concept is the same the fire alarm door bell is activated using a solenoid which has 2 trigger points. It is then powered by a couple of D cell batteries..
haiya i didnt know there's a battery in there! and i didnt know the wires are not live! thanks for this bro! will fix mine soon! im a handyman but my weakness is wiring / electricals
Thank you for your video! Managed to salvage my 20 yr old door bell after watching your video. Love your content. Found it succinct yet practical!
Thanks for the feedback!
thanks! chanced upon this video, very clear and informative.
Like share and Subscribe! Show your support and I'll make more!
Good and clear. We'll done video.
Thank you!
I am staying at Ponggol walk.
Do you fix room to room calling bell?
Please advise and thank you.
Hey bro.do you have video talking about different kind of drills and its bits? I am so confused which one to buy for my first DIY simple project
I do! Check out What's In my belt video!
Thanks for mentioning our HDB BTO is not hard-wired...im searching for a comoatible transformer/ power plug for my TP Link Tapo D235...any pointers/ links u can provide?
@iwaderiwadi5068 wah cheem a bit hard to explain in a video cos I don't have a setup to demo. I'm not sure the capacity of the wires. But since there are 2 I'm sure they can carry a low voltage ac or dc
@@ThePunggolHandyMan Thank u...managed to try out on an unused power plug with identical rating as the Tapo D235....working well :o)
Hi do you install Wired Video DoorBell？
Hi when I use the plier to test the connector, there's isn't any sound on the bell, but there's sparks, same layout as yours, top and bottom left row. Is my bell spoil?
Yea most probably.. when u use the pliers there should be a chime
Thanks for the speedy replies bro! No wonder I thought my connection was wrong all along. May I know where did u get this bell, as mine looks exactly same as yours
@@linwei20 it's usually available at most hardwarestores. I get mine tight downstairs!
Thanks for sharing.❤What if the owner doesn't have a driller tools.can place the doorbell cover just that ?
@@cccece3737 erm double sided tape might work
@@ThePunggolHandyMan Haha just realised that double tape will do.Thanks
@@cccece3737 solves everything!
Hi, can we change it to doorbell camera? Hdb allow?
Gotta check with HDB actually
So all wired doorbell needs a battery, right? How long does the battery last?
Nowadays there's doorbell that doesn't require battery. Just plugged into power socket. Are they good?
@KarenChua-o2g well good or not is subjective I change my batteries every 3 years so I guess it's okay?
Thanks for the vid. Was looking at this traditional door bell n reusing the given existing hdb door bell switch instead of the current digital ones with transmitter. Is it possible to use strong tape instead of drilling?
Do i hv to do anything to the switch outside?
Yes u can!but putting in a screw is better
Great video! Very informative for people to do simple diy.
Suggesting to do a water heater wiring check video?? ( i dont recommend novice doing the change themselves but how to check if everything is in order) I believe it will be very informative for the general public especially after the report on the water heater incident.
Hahah hot topic for water heater 😆 I can make one!
Jordan Bro, (i'm from SG Home DIY fb group - the one who said you must say when you're joking), why must Doorbell Receiver be mounted near ceiling? I saw my Britz Doorbell manual said must be 1.8metres high, but no reason given. Can I connect 2 wires to extend it to much lower height, so that I can see it clearly to troubleshoot? I guess battery contact points turned rusty after many years, need to clean. Any special way to connect the wires? Many Thanks!
Hello! That's a funny instruction! I have one doorbell hidden under a foot cabinet and it still works! And yes you can bring the doorbell down but I have changed my batteries once every 3 years so there is no reason you need to have it so low. Remember 3 years ago? That's when we were all locked down
@@ThePunggolHandyMan Ok great! Then, how to connect the extension wires ~ buy any type of wire connectors? Just find any 2 wires & just connect? Sorry i can't find anyone actually did such an extension, so must ask you for expert advice. Many thanks for your quick reply, Jordan Bro!
Noob question, but I am having trouble finding an analog/mechanical doorbell for my place. Tried online and also a few hardware stores already. Can you please share where you got yours? Appreciate the help.
I bought it from opposite Damai LRT station in Punggol
Do you have anyone or video about fixing the HDB doorbell switch, next to the gate door...I notice that diy shops sell their switch size slightly smaller than the actual one that HDB provide...Do you know where we can get the one originally from HDB BTO flat door bell switch?
@adrianlee3635 yours might be a older version but usually just copy n paste
Some hardware stores still sell but you gotta search for it a little
@@ThePunggolHandyMan Thks, grateful if you can highlight to me if you perchance might see them.☺
@@adrianlee3635 you can try any CCM shop. Show them a photo they should have it.
@@ThePunggolHandyMan CCM shop? Means?
Hmmm.... mine has blue and brown wires
Hi. I already installed the doorbell inside kitchen. Tested and works fine. But the doorbell switch outside gate just doesnt work when pressed. What is the cause?
@joys229 maybe it's the switch problem have you checked the wiring?
What power drill brand do u recommend? First time getting tools
Hi I recommend the one in my video. You can find the link in the description! It’s a makita
Which size tile drill bit you using?
I use 5.5mm
@@ThePunggolHandyMan thank you for your reply. Awesome content.
@warheart03 thank you! Check out the "what's in my toolbelt" video where I discuss my bit selection and logic
Behind it
@@ThePunggolHandyMan Thank you for the tip.
Any idea how to remove the cover to change the battery??
You need to pry it out with screw dricer
i heard that to install google nest doorbell, transformer is required. What is transformer? How to install transformer?
@@Kalimatullah_Yoh1-1.14 wow that's a whole other video
@@ThePunggolHandyMan no video?
Not at the moment
@@ThePunggolHandyManbro u do installation of chime? If yes can i have more info?
@@Kalimatullah_Yoh1-1.14 nope! I only put up videos for you guys to watch
Just to check with u I wish to remove my HDB door bell and swap to a light bulb for my prayer alter and make the on/off switch inside my house .is it possible for me to use the door bell wire cables?
No these are not live wires and there is no power I'm them
Bro, my door sudden do not work. Suspect could be the door bell problem, after changed new but still do not work. So I changed the switch outside my gate also, but still do not work. What do you suspect and advise? Thanks!
Hi I'm not sure what the issue is, do contact me on Facebook for more
ah...so that the mystery small circular white cover. HDB Virtual Tour cannot zoom in enough to see the label. OK! will get a Wired Door Bell before Key collection! thanks!
Tell your ID to install it hahah!
@@ThePunggolHandyMan DIY all the way!
I love this spirit! Then you should do it like my neighbour who wired up a fire bell!
Hi bro, wanna ask. Im planning to install a fire alarm doorbell.. any plan to do tutorial?
Not really lol! But the concept is the same the fire alarm door bell is activated using a solenoid which has 2 trigger points. It is then powered by a couple of D cell batteries..
❤❤❤❤❤❤
haiya i didnt know there's a battery in there! and i didnt know the wires are not live! thanks for this bro! will fix mine soon!
im a handyman but my weakness is wiring / electricals
No worries bro! We all help and learn from each other!