Coding the ECU after installing LED tail lights in a 2010 Golf VI 118TSI to remove the bulb out warning on the dash Using ross-tech VCDS / VAGCOM cable and software
Newest VCDS has long coding for byte 18 no need to enter binary any more which removes a lot of the risk of bricking your BCM when screwing the codes up.
Hi. What do you mean? That now we have a list with car models, and what I need is just to choose the correct one? I have VCDS 23.3.1 version. I have Skoda Yeti , and I see my car in the list. I changed all the halogen bulb with LEd, and I got an error, now try to fix that.
This video is now useless, VCDS updated in 2012 and you canno longer edit byte 18 as shown on this video. Now you need to copy and paste the long code (dont click long code helper) into the new coding box then change the byte 18 digits (normally 00) to 15 and click do it. Tried and tested.
I do have this bulb error on my golf plus 2005 after installing LED reg plates lights but when put the old bulbs back this error is still o the dashboard ... Anyone can help please ...
Hey bud, my friend is driving a 2010 VW golf TDI, when I plug my VCDS in and go to BYTE 18 it does not allow me to edit the binary code how do I get my VCDS to allow me to edit the binary through long coding or is there another place I can edit it?
Hey man it's been like 2 months I'm trying to fix the same thing on my 2010 did you ever figure this out? Why is it that our year and make and model seems to have only problems with this?
Hello friend, I have a GTI MK6 with failure in an AFS module and although all the lights work well the bulb failure light is on, do you know if with this coding I can turn it off?
Hm, anybody have any idea how to do this on a 2011 scirocco? This doesn't seem to work, it sets the setting to "Not found" and disables the drl, meaning I assume that the platforms are different
@@MallV0lli0 can i use the same code for Audi a4 b8 2008? i have installed reverse led light, and each time wen i put my gearbox in reverse, i got error to replace my reverse light bulb with normal one
👋 I have skoda Yeti 2014 1.8 TSI I already replaced all the halogen bulbs with LED bulbs. All work fantastic. Just get an error on the dashboard screen. I also have VCDS, I also succeeded in going to the binary code change page on byte 18. Now, the binary code is set to 0000000 I see you have changed it to something like this 0000100010, or something that I will choose randomly. What do you think? Can I do the same binary code as you did? Or it must be special and unique code for my yeti ? If it must be a unique code, do you know where can I get it?
Can I code to turn the fog light warning light off? I have LED fogs. Also, I did the side marker delete in the bumper, Can I turn those off instead of having the bulbs installed and just dangling there?
Fantastic thanks very much. I have been looking everywhere for this!
You don’t know how to remove the warning for the front lights also?
This fried my CECM! Cool!
can this be used if u replace the normal bulbs (numberplate / park lights) to (pilot) leds?
Newest VCDS has long coding for byte 18 no need to enter binary any more which removes a lot of the risk of bricking your BCM when screwing the codes up.
You mean that now we have multiple sélection to deactivate the cold lamp diagnosys?
Hi.
What do you mean? That now we have a list with car models, and what I need is just to choose the correct one? I have VCDS 23.3.1 version.
I have Skoda Yeti , and I see my car in the list.
I changed all the halogen bulb with LEd, and I got an error, now try to fix that.
the explanation is fine, but what is interesting to know where they get the code
Work with Polo 6R 2012 !?
Hi, where did you get this code? I need it for VW Scirocco.
Thanks.
this did not work for our customers golf vi.
This video is now useless, VCDS updated in 2012 and you canno longer edit byte 18 as shown on this video. Now you need to copy and paste the long code (dont click long code helper) into the new coding box then change the byte 18 digits (normally 00) to 15 and click do it. Tried and tested.
+G Muir Do you know if this eliminates the bulb out error for just tail lights, or other lights such as LED daytime driving lights as well?
do you have it working? binari box is not on vcds 15.7.0 only the drop donw menu. Can you help?
Will this work on led tails?
And also if you change city Amber lights to 95% it flags a corner light out.
I do have this bulb error on my golf plus 2005 after installing LED reg plates lights but when put the old bulbs back this error is still o the dashboard ...
Anyone can help please ...
Hey bud, my friend is driving a 2010 VW golf TDI, when I plug my VCDS in and go to BYTE 18 it does not allow me to edit the binary code how do I get my VCDS to allow me to edit the binary through long coding or is there another place I can edit it?
I’d like to know myself
Good video! What diagnostic do you use? Cheers
VCDS
Just a heads up, this did not work on my MK6 2011 GTI with Xenon lights. Its north american and not european.
Hey man, was wondering if you ever figured out your coding for the 2011 gti with xenons? I have the same and can’t find an answer
Use vag can pro and disable cold light diagnose.
@@roybm3124 hey guys I have a 2010 GTI MK6 and the option of disabling the lamp monitoring doesn't work
Perfect ❤
Now error lamp is dissappear forever/deactivated?
press the break, if you want to get it to D (automatic transmission)
Will the same process work for a 2009 Skoda Superb where I've replaced halogen fog lams by LEDs?
Hello, will this work on a 2016 vw Amarok?
Can you do this on the vag lite version
this is different on my 2010 gti. There is no binary to change & a warning is in red not to make any changes! Any advice?
Hey man it's been like 2 months I'm trying to fix the same thing on my 2010 did you ever figure this out? Why is it that our year and make and model seems to have only problems with this?
@livid2livid2
It works well on 5 golf? Is somewhere on youtube video?
Hello, I want to try this in my own car, but there is no place where I can write the binary there.
Hello friend, I have a GTI MK6 with failure in an AFS module and although all the lights work well the bulb failure light is on, do you know if with this coding I can turn it off?
if it doesnt work for you have to set byte 18 manually from 00 to 15
It Will work with a Vw Passat b6 (mk6)? Thank you
Hm, anybody have any idea how to do this on a 2011 scirocco? This doesn't seem to work, it sets the setting to "Not found" and disables the drl, meaning I assume that the platforms are different
with this procedure the burnt stop error is removed?
Will you still get a bulb out warning if one of your LED's goes out?
no, you are basically telling the car to ignore and just power the socket like in old cars
@@MallV0lli0 can i use the same code for Audi a4 b8 2008? i have installed reverse led light, and each time wen i put my gearbox in reverse, i got error to replace my reverse light bulb with normal one
@@markodjedovic2772 the coding may be a bit different but the idea is the same
@@MallV0lli0 thank you, I find original video just for my car :)
@@markodjedovic2772 once you enter the confort module it's straight forward
"Do it again" by the Chemical Brothers.
👋
I have skoda Yeti 2014 1.8 TSI
I already replaced all the halogen bulbs with LED bulbs.
All work fantastic.
Just get an error on the dashboard screen.
I also have VCDS, I also succeeded in going to the binary code change page on byte 18.
Now, the binary code is set to 0000000
I see you have changed it to something like this 0000100010, or something that I will choose randomly.
What do you think? Can I do the same binary code as you did?
Or it must be special and unique code for my yeti ?
If it must be a unique code, do you know where can I get it?
Can I code to turn the fog light warning light off? I have LED fogs. Also, I did the side marker delete in the bumper, Can I turn those off instead of having the bulbs installed and just dangling there?
Did you finally turned off the fog light warning?
How about check engine coding?
Does anyone know if this will happen at Golf 6,2008?
it work with transporters 5?
Which Cable do you use?
VCDS 15.7.3 is different
I clicked on Byte 18 and the Binary code box is not there. Any idea on how to do it now?
I have the same problem Binari is not there. Did you fix this? i have vcds 15,7,0
Just change it in the longcoding
DJPelio it fixed I have vcds 16.8.3 now.
your vag-cable isn't original! is that possible to coding the car with VCDS lite???
whil this work on a Golf Gti from the year 2009 i have R20 led licht please help thanks
No, I have tried it on mine. Nothing works so Im going to remove the warning bulb!
Gonna try
How Much Would This Cost...?
Is there any possibilty to do this without VCDS?
Yes use vag can pro to do it.
please coding led in jetta mod 2016
Whats the green light on your right on dashboard?
Bruno18bj automatic gearbox, and he he just doesn't press brake
I have got this light then I spend £45 but after 3 months I found it again
2006 audi a3 2.0l tfsi headlight n/s and o/s anyone need to know!
hey what is the code for the 2016 skoda octavia?????
Agoria - Les Violons Ivres
Hey people, Just wondering if i can code a km/h dash cluster, to my uk import which is mp/h?
yess you can
Bonjour
This is not possible. You disable the errurr cold but when you start the car hot mistake come back. Must be modified in the eprom but not with vcds