😢Thanks to you now I’m gonna purchase the controller and replace it with the help of your video tutorial! I was looking for hours, the name of the part, video tutorial on how to fix it. My scooter battery connector broke off and the wires ripped off, I was gonna have some more solder it but now thanks you I can now replace the entire part and achieve a clean profesional job, all thanks to you!. Thank you. Thank You. Thank You.
Excellent video! I have a X7 pro that won’t power up even though the battery is at 42 volts. When I attempt to turn on the scooter and wait a few minutes the display screen is warm but no display. Does this mean my display is bad or perhaps the controller. Also when I install my battery the front headlight flashes once is this normal?
@@HorizonMicromobility its just the cable to the motor i need replacing, looking for the cable itself is an issue, can only see the entire motor and wheel or the controller cable 🤔 also im female trying to fix for my son, nobody where i live fixes them
Can you do a video on how to remove stripped hexed screws to remove tires? The factory or someone at Turboant put the screw in so tight it’s already stripped and now I can’t get it out.
On the x7 max i got a E8 error code after getting caught in the rain im pretty sure it is water damage that caused it asking for help if anyone knows if thats the case or not. Got a controller coming in for replacement just tryyna make sure that would solve my issue
😢Thanks to you now I’m gonna purchase the controller and replace it with the help of your video tutorial! I was looking for hours, the name of the part, video tutorial on how to fix it. My scooter battery connector broke off and the wires ripped off, I was gonna have some more solder it but now thanks you I can now replace the entire part and achieve a clean profesional job, all thanks to you!. Thank you. Thank You. Thank You.
Good luck! It's fairly straightforward. Take your time.
What are the symptoms of a bad controler?
There was an extra ground wire on the new unit, no where to connect it? Rain damaged and it still doesn’t work…any ideas?
Not sure what you have there
Do you know which cable is the speed limiter?
@@Moopyloopy blue. It should loop in and out of controller if fitted. Don’t cut otherwise!
Excellent video! I have a X7 pro that won’t power up even though the battery is at 42 volts. When I attempt to turn on the scooter and wait a few minutes the display screen is warm but no display. Does this mean my display is bad or perhaps the controller. Also when I install my battery the front headlight flashes once is this normal?
Do you have a video that shows replacing the wires below the controller to the motor wheel ?
Not at the moment. If replacing the motor then it's fairly straightforward.
@@HorizonMicromobility its just the cable to the motor i need replacing, looking for the cable itself is an issue, can only see the entire motor and wheel or the controller cable 🤔 also im female trying to fix for my son, nobody where i live fixes them
@@stephdyer138 not aware if you can buy just cable. Email us a photo and we’ll see if we can help
Can you do a video on how to remove stripped hexed screws to remove tires? The factory or someone at Turboant put the screw in so tight it’s already stripped and now I can’t get it out.
You're going to need to drill it out. Or use a torx bit, hit it in.
On the x7 max i got a E8 error code after getting caught in the rain im pretty sure it is water damage that caused it asking for help if anyone knows if thats the case or not. Got a controller coming in for replacement just tryyna make sure that would solve my issue
there’s a red key on my display how do i fix it
Hi there my scooter beeps very low the press the power button but does not turn on any solution?
Did you find a fix for this?
@@georgemolina8780 bought new controller and screen
Do you know of anyone who has the HX7 T010-K-V3-1 17A Controller in stock?
We should have that, email us and we can check
will you have X10 for video soon ?
No plans to at the moment. It doesn't really fit in with our current product line.