Had the same issues finding new pair of levers especially where i am from, there aren’t many accessories for the Honda CRF. Bought the same levers as you from China and it’s been working fairly well, better than I expected. Hope to see more videos from you on the Rally and BMW GS. All the best from Vietnam mate!
Good to know. There’s a few things to do to the GS, but I know most people don’t come here for that! All my Ireland videos will be on it, so will see how many I drive away! Cheers
I fitted very similar levers to my CRF300L last week and, like you, drilled out the clutch lever pivot hole but I also fitted a thin shim with the clutch lever to reduce the vertical play. I guess the gap between the jaws is slightly larger on the 300 than it is on the 250.
@@robertlambert7906 no idea I’m afraid. I’m not expecting any 300L changes but I don’t think the 2022 models are confirmed yet. As for the 450X, not a clue I’m afraid. Google perhaps?
I’m sure that in time proper 300 levers will become available. It’s just taking a while to filter down. The stock ones are fine, and it’s only really a thing for two finger clutch operations. The levers seem to be everywhere and are cheap. I just hope they last! (Though with the handguards there’s a fair bit of protection for them.
@@PeakMotorcycles I ordered these short levers from e-Bay last week. It will take them a month or more to arrive. I’ll be upgrading the Rally with the skid plate, hand guards, tail tidy, exhaust, etc. from BikerzBits soon. The Double Take mirrors and the Garmin Zumo came in this week, as well. The mirrors are excellent. I got a set for the KLR, also. Thanks again for all your upgrade recommendations.
Hmm I just installed the zeta levers a day or so ago and they fit up perfectly. Zeta says it’s the same part number for 300 as the 250. Took a 60m ride with them yesterday and worked great. But I will say the clutch does come all the way back to the bar. I thought you had the red zeta’s. Couldn’t find those anywhere so I had to go with the black.
I couldn't find any Zetas anywhere in stock, and these are just cheap copies from China from eBay. Interesting that the Zeta ones say that they fit both... I don't think I'm the only person who found the clutch lever needed drilling out. Maybe mine are for an earlier version of the 250? The levers I have definitely came with a 7mm hole and needed an 8mm to fit the stock bolt. I don't have a 250 to check I'm afraid.
Hey. I’m trying to buy the same leavers but on Amazon. What year of CRF 250 your levers supposed to fit? I was assuming 2020? & what crf model? F, L, R? Let me know please thank you.
@@chrisallen5548 we managed to avoid it for a while but got caught in a downpour just before the Riverside South Downs cafe. No space inside but had some shelter under a big umbrella outside. Then it started again… one more big soaking just after we left heading up to Whiteways and then mostly dry. Last stop was Newlands Corner where we were under cover when the heavens opened and managed to wait it out with a bit of cake. The ride back to London was a bit damp with spray but nothing too bad. I hope you had a good day out and managed to avoid the worst of it. Good to meet you too!
🤣 if I was doing it for the $ I would have given up long ago. I’ve another 10 to do from the show, and then I’ll do one last one for the year and take a break for six weeks. Back in Feb with renewed energy and some more content I hope!
It may look, but it doesn’t come into contact and clutch operation is not affected. I’m 2000 road and trail miles into it now and still using the same levers.
Humm, mine hits but shifts fine. Have to look at it again. The length of the bend and overall length is shorter. I like the shorter length. Have to fiddle with it
Is it just the shoulder on the bolt a different size and the thread size/pitch the same? I was think it might be easier just to get a clutch bolt that fits the 250.
I would have thought so, as I think the master cylinder and levers are the same part for ABS and non-ABS versions. That said, these levers didn’t fit my bike. I had to drill out the pivot holes to make them fit. (In the video 😉)
True, but it is short enough to clear two of my fingers when pulled to the bar, which was the aim. There’s also a reason there’s a ball or ring on the end, which I guess you lose with cutting the stock one. It is cheaper though.
@@PeakMotorcycles It's true, but in the Africa Twin I made a screwed aluminum plate, which replaces the ball...I'm also trying to understand if I can adapt a MTB lever on an original basis. .
I'm sorry but I don't know. I don't think I ever remember seeing both listed as bikes for the same levers, so my guess is no. Perhaps your Honda dealer could confirm?
@@PeakMotorcycles What I do is round off the edges and now I am thinking of plasti dipping them with plasti dip (red). But only a little portion of the handle where the two fingers grip the lever.
Question. I greatly dislike the price of the zeta levers, but I also don't want amazon chinesium levers. What is a good middle ground set for a 300 rally?
I haven't, but then I guess it's not the first thing that comes up in conversation. I had a quick google, and perhaps something like the AS3 forged levers? www.as3performance.co.uk/products/honda-crf-250-l-2012-2020-rally-2017-2020-forged-front-brake-and-clutch-levers-set-black I haven't tried them myself, but it's a known brand and price wise between the cheap ebay ones and the Zetas.
@@PeakMotorcycles No 300L or rally mentioned on their site. I looked at 250L parts and they don't have levers for it, just the other non street legal 250 models. Plus I am assuming the clutch would need to be drilled would have to be drilled even if they had some. Weird.
I recently bought these off ebay for my CRF250L, Part# ZS4-3101-3. I have the same issue, the clutch pivot hole diameter is too small. To enlarge it, I didn't dissemble the lever, no drill press, you can just put that pivot section on the edge of a piece of wood and use a hand drill to enlarge the hole. The 2nd issue is the thickness of that pivot area. It looks you have the same part number as mine but has a better fit, mine is much thinner than stock, had to use a washer to fill up the slop. Inconsistency of these parts? Also the stock lever has a brass pivot bushing. I think some of the nicer aftermarket levers have that also. I made a video showing the issues, ua-cam.com/video/Xl1LIMvxI_A/v-deo.html
Great video. Love the detail and filming close up with detail. Perfect thank you.
Glad it was helpful!
Thank you so much for this video! I ordered the levers and drill bits and look forward to assembling it all this weekend.
Have fun! (I would have thought there might have been some the right size by now?)
As ever .... A good step by step guide which is extremely helpful. Many thanks 🙏
You’re welcome. I am running out of things to do. Must be nearly time for a new bike!
Had the same issues finding new pair of levers especially where i am from, there aren’t many accessories for the Honda CRF. Bought the same levers as you from China and it’s been working fairly well, better than I expected.
Hope to see more videos from you on the Rally and BMW GS. All the best from Vietnam mate!
Good to know. There’s a few things to do to the GS, but I know most people don’t come here for that! All my Ireland videos will be on it, so will see how many I drive away! Cheers
Your videos are very helpful, thanks!
You are welcome. I’m having a bit of a break at the moment but normal service will resume shortly.
I fitted very similar levers to my CRF300L last week and, like you, drilled out the clutch lever pivot hole but I also fitted a thin shim with the clutch lever to reduce the vertical play. I guess the gap between the jaws is slightly larger on the 300 than it is on the 250.
Good point. I’ll measure them. I thought I had about the same play in stock as the replacement, but it may be that both needed a shim! I’ll check.
So will the levers from the 2022 300L fit on my 2022 crf450x
@@robertlambert7906 no idea I’m afraid. I’m not expecting any 300L changes but I don’t think the 2022 models are confirmed yet. As for the 450X, not a clue I’m afraid. Google perhaps?
Thanks for another quality upgrade/instal episode.
I’ll try to find a set of those levers, as well.
I’m sure that in time proper 300 levers will become available. It’s just taking a while to filter down. The stock ones are fine, and it’s only really a thing for two finger clutch operations. The levers seem to be everywhere and are cheap. I just hope they last! (Though with the handguards there’s a fair bit of protection for them.
@@PeakMotorcycles I ordered these short levers from e-Bay last week. It will take them a month or more to arrive. I’ll be upgrading the Rally with the skid plate, hand guards, tail tidy, exhaust, etc. from BikerzBits soon. The Double Take mirrors and the Garmin Zumo came in this week, as well. The mirrors are excellent. I got a set for the KLR, also.
Thanks again for all your upgrade recommendations.
The levers came in today's mail. This video will surely help when I do the install.
Thanks again!
Thanks. Appreciate your videos!
You’re welcome.
Excellent instructional video, think I’ll wait for the Zetas though
Yup. I'm sure they'll be better and will fit out of the packet. If I didn't have handguards, I wouldn't have fitted unknown aftermarket levers.
Hmm I just installed the zeta levers a day or so ago and they fit up perfectly. Zeta says it’s the same part number for 300 as the 250. Took a 60m ride with them yesterday and worked great. But I will say the clutch does come all the way back to the bar. I thought you had the red zeta’s. Couldn’t find those anywhere so I had to go with the black.
I couldn't find any Zetas anywhere in stock, and these are just cheap copies from China from eBay. Interesting that the Zeta ones say that they fit both... I don't think I'm the only person who found the clutch lever needed drilling out. Maybe mine are for an earlier version of the 250? The levers I have definitely came with a 7mm hole and needed an 8mm to fit the stock bolt. I don't have a 250 to check I'm afraid.
Hey. I’m trying to buy the same leavers but on Amazon. What year of CRF 250 your levers supposed to fit? I was assuming 2020? & what crf model? F, L, R? Let me know please thank you.
Perfect. Thank you 👍
You're welcome!
Brilliant, I was looking for some short levers for my 300L. Thanks.
Rykas?
@@PeakMotorcycles Yes, Rykas. Great to meet you. I hope you had a good ride and didn't get caught in the downpour later.
@@chrisallen5548 we managed to avoid it for a while but got caught in a downpour just before the Riverside South Downs cafe. No space inside but had some shelter under a big umbrella outside. Then it started again… one more big soaking just after we left heading up to Whiteways and then mostly dry. Last stop was Newlands Corner where we were under cover when the heavens opened and managed to wait it out with a bit of cake. The ride back to London was a bit damp with spray but nothing too bad. I hope you had a good day out and managed to avoid the worst of it. Good to meet you too!
@@PeakMotorcycles Managed to escape yesterday but got caught in a downpour on the way to an AIM meet. Hopefully summer will return soon.
Good job can you please tell me where I can buy exactly like your I buy one and are not good I have Honda 250 L 2
Hi,
The links to what I bought are in the video description with links to UK and US eBay.
Hi Andre, I inform you that the my rider rally footpegs of my ex Africa Twin Adv 2018, fits perfectly on my-our Rally CRF300L 😉★
Thanks Luke. I’d tried to find some AT Enduro
Pegs, but they are rare as hens teeth.
Great vid, is putting that extra twist in your clutch cable ok? Cheers
Thanks. I’m a couple of thousand miles in on mine and so far no problems…
Thanks for sharing. Ride Safe!
Thanks. You too.
It seems you have no free play in your clutch, after installing the lever. Did you need to readjust the free play?
Hi, I did, but I rode it and tweaked it. It wasn’t much. Perhaps half a turn.
Greetings Andre.
Forget about the $, keep producing more videos🇺🇸🎉🍾🇺🇸
🤣 if I was doing it for the $ I would have given up long ago. I’ve another 10 to do from the show, and then I’ll do one last one for the year and take a break for six weeks. Back in Feb with renewed energy and some more content I hope!
@@PeakMotorcycles thanks for responding, it is always a pleasure to rear and watch all your videos content 🇺🇸🎉🍾🇺🇸
Nice video !!
Thanks. I think there are now proper ones out there which don’t need to be drilled, but at the time this was the least worse option.
The clutch side looks like it hits the plastic turn signal assembly with the bend in the new lever. Does it affect the clutch operation?
It may look, but it doesn’t come into contact and clutch operation is not affected. I’m 2000 road and trail miles into it now and still using the same levers.
Humm, mine hits but shifts fine. Have to look at it again. The length of the bend and overall length is shorter. I like the shorter length. Have to fiddle with it
Does the clutch lever stay more firm or still move up and down like the standard?
Is there any trick to make the standard clutch lever firmer?
Thanks!
It still moved a bit. After the video I added a washer, which helped. I expect you could do the same with the stock lever.
How did you go with the clutch switch? Does it still start in any gear with the clutch pulled in?
I think so, but I haven’t tried. The clutch switch still engaged so I guess so. I’m travelling at the moment so can’t check I’m afraid.
What if it’s the other way round 300 brake lever on a 250 would that work ?
Good question, but unfortunately I don’t have a 250 to try my 300 levers… Apologies.
Thanks. I am waiting for Zeta to become available . I have them on a crf250x & they have stood the test of time
I think they are out but no one has stock. I’m sure they will catch up eventually.
Did the clutch lever hit the headlight switch on a full pull of the lever? I’ve seen this as an issue on other installs for the CRF Rally.
Not on mine. There’s no headlamp switch on the front of the button housing.
Is it just the shoulder on the bolt a different size and the thread size/pitch the same? I was think it might be easier just to get a clutch bolt that fits the 250.
Maybe, but I haven’t tried.
these things still working for you ?
They are indeed
Does this work for 300L non abs? Shows doesn’t fit on eBay
I would have thought so, as I think the master cylinder and levers are the same part for ABS and non-ABS versions. That said, these levers didn’t fit my bike. I had to drill out the pivot holes to make them fit. (In the video 😉)
@@PeakMotorcycles ok thanks. Stock handles suck so was excited maybe a fix. I’ll give it a watch thanks for all your great work 👊🏻
謝謝你詳細解說
Thanks
great video thanks
You’re welcome! I’m still hoping some more ‘300 specific levers come out so this is no longer needed!
It's not much shorter than the original, maybe I'll cut the original lever, little expense, great return
😁
True, but it is short enough to clear two of my fingers when pulled to the bar, which was the aim. There’s also a reason there’s a ball or ring on the end, which I guess you lose with cutting the stock one. It is cheaper though.
@@PeakMotorcycles It's true, but in the Africa Twin I made a screwed aluminum plate, which replaces the ball...I'm also trying to understand if I can adapt a MTB lever on an original basis.
.
Will the 300L levers fit on a 2022 crf450x are they the same
I'm sorry but I don't know. I don't think I ever remember seeing both listed as bikes for the same levers, so my guess is no. Perhaps your Honda dealer could confirm?
They do look fancy but for me I'm just cutting the ball part off the original levers and voila the same function without buying anything.
Yup. That’s the perfect solution. Harder to go back to if you decide to return to stock, but Honda will always sell you an OEM one if they can.
@@PeakMotorcycles What I do is round off the edges and now I am thinking of plasti dipping them with plasti dip (red). But only a little portion of the handle where the two fingers grip the lever.
Well, these have adjustable reach. Not sure if the stock levers do.
Question. I greatly dislike the price of the zeta levers, but I also don't want amazon chinesium levers.
What is a good middle ground set for a 300 rally?
Hi,
I've only tried the OEM ones and these ebay specials which I guess fall into the category you don't want... I haven't tried any others I'm afraid.
@@PeakMotorcycles Have you heard of any success from others?
I'm not opposed to amazon levers as long as they are quality.
I haven't, but then I guess it's not the first thing that comes up in conversation.
I had a quick google, and perhaps something like the AS3 forged levers? www.as3performance.co.uk/products/honda-crf-250-l-2012-2020-rally-2017-2020-forged-front-brake-and-clutch-levers-set-black
I haven't tried them myself, but it's a known brand and price wise between the cheap ebay ones and the Zetas.
@@PeakMotorcycles No 300L or rally mentioned on their site. I looked at 250L parts and they don't have levers for it, just the other non street legal 250 models. Plus I am assuming the clutch would need to be drilled would have to be drilled even if they had some.
Weird.
Top job bud 👍🏻
Thanks
You didn’t weigh them! Did I miss it? 😉
#Legend 🤣🤣🤣
Great
Apparently some of the Honda OEM 250 levers fit without modification. Not sure how that works, but it’s probably fine. Though more expensive.
I recently bought these off ebay for my CRF250L, Part# ZS4-3101-3. I have the same issue, the clutch pivot hole diameter is too small. To enlarge it, I didn't dissemble the lever, no drill press, you can just put that pivot section on the edge of a piece of wood and use a hand drill to enlarge the hole. The 2nd issue is the thickness of that pivot area. It looks you have the same part number as mine but has a better fit, mine is much thinner than stock, had to use a washer to fill up the slop. Inconsistency of these parts? Also the stock lever has a brass pivot bushing. I think some of the nicer aftermarket levers have that also.
I made a video showing the issues, ua-cam.com/video/Xl1LIMvxI_A/v-deo.html
Thanks for sharing. I’ll take a look. I put a washer in mine after my first ride out with it. It’s still not perfect, but it’s better than it was.
@@PeakMotorcycles I forgot the size of the washer I used, metric if I recall. Regardless, i do like the feel of these levers much better than stock.