Indoor Propane Plumbing - WE HAVE GAS. (and leaks)
Вставка
- Опубліковано 27 сер 2024
- The final stretch before starting our radiant floor heat! Much more DIY plumbing to come :)
Comment if you have any questions and stay tuned for radiant system start up!
PRODUCT LINKS:
ZIP System Liquid Flash Sealant: urlgeni.us/amz...
Spyder 14-Piece Carbide Hole Saw Kit: urlgeni.us/amz...
Big Blu Brush On MicroLeak Detector: urlgeni.us/amz...
* LINK TO ENTIRE HOUSE BUILD PLAYLIST: • Self-Building Our Home...
--------------------------------------------------------
📸 Camera Gear ⬇️
-Main Camera: amzn.to/3WND8Ea
-Drone: amzn.to/3Dphkbf
-Wireless Mic: amzn.to/3wDwYvL
-Voiceover Mic: amzn.to/3kVu0A4
-Main gimbal: amzn.to/3HhH8Hj
-iPhone gimbal: amzn.to/3HfX1ya
-Camera backpack: amzn.to/3wB6DOS
- Lots more on the storefront! www.amazon.com...
--------------------------------------------------------
ABOUT US: We are Alex and Elaina, a couple in our 20s who are currently living on the 3-acre farm in southern Pennsylvania where Alex grew up. We have a garden, backyard chickens, and build or fix anything that we need to. We still work corporate day jobs, but are working to eventually leave the 9-5 lifestyle in favor of a self-built, debt-free, homestead on 6 acres nearby.
We upload a UA-cam video each week (usually Sunday at 9️⃣am EST), and post daily on Instagram!
COME SAY HI 🙂
Instagram: / masondixonacres
Facebook: / masondixonacres
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product with these links, we may receive a small commission at no additional cost to you! Thank you for supporting our channel ☺️
#building #selfbuild
When you use blocks as a pad outside, you can fill the cores with gravel (almost full) and then use thinset to adhere a piece of tile backer. Kind of the the poor man's slab. This will also give you the opportunity to mix a small batch of thinset and call it practice for when you go to tile your bathroom or kitchen backsplash.
I like it!
It looks cold. Don't spray paint in the cold if you can avoid it. Meaning paint those pipes in a warmer place first, then touch up after. If you absolutely must, then warm up the can in a pot of hot water first.
So true! Weather has a huge affect on spray paint. If it's below 65-70 degrees it gets sticky and doesn't coat well, even colder it freezes. If it's humid or raining it takes hours to dry while on a hot day it'll almost dry instantly.
Nice work! Happy Sunday!
I know the TWH has it's own shutoff but I'd put one before the flex connector as well. Will be able to isolate that system in case the hose leaks without having to shut off everything else. Neat that the TWH has it's own dirt trap but kind of pointless since you added one at the main manifold which is at a lower location.
I generally just pipe dope, I do find the t-tape makes removing fittings a lot easier down the road. Don't trust the Schrader valves and test rigs, they tend to fail lol. I do 30 PSI for 3Hrs for pressure test, this makes finding leaks easier too when using soap test.
The foam/small bubbles don't matter, just want to look for bubbles forming or getting bigger.
Thanks for the input! Yes half the time it's my test rig that leaks so that's always the first thing I check 😁
looks like bit of stress on the compression fitting on short csst pipe soapy water test
the official leak test was by the gas company before the tank hookup, all is well and good
Is that outside elbow cross threaded at 16:59 minutes??
Haha no it’s an illusion. You’re the second person to comment that actually
I like that hole bit, over the years I spent way too much time removing wood plugs. What make and model of the bit.
They're a total gamechanger, I will never use the old style again. Here's the link: urlgeni.us/amzn/aupg
@@MasonDixonAcres Thank You
@@MasonDixonAcres Just in time, when I set up my coop I want juice coming to it. Can't wait to send you guys pics of the finished product.
Dont mess with gas.Youre scaring me
I'm all for DIY most of the time, but electrical and gas are two trades that should be left to licensed tradespeople. Consequences of mistakes are too high.
We’re doing both so hopefully we read the code closely enough 😆
@@MasonDixonAcresit’s not about knowing the code. It’s about the experience. There’s a reason apprenticeships exist and are supervised by experienced journeymen.
I get the “we built our own house” schtick, but putting lives in danger makes no sense. It’s why licensing and training is so extensive for trades.
If anyone could just read a book, there’d be no need for licensed tradespeople.
Looks like you cross threaded a part of the gas line - the 90 @ 16:54
See what you mean, but it was just the camera angle and how the foam was sitting! That was assembled by hand
Maybe a newer pipe wrench with teeth.
Are you a mechanical engineer?
Yep!