@@MauriceBln1 crazy. I’m not too sure the laws with driving with underglow on. But I think you can get in trouble with red or blue. But an amber color for us should be legal to drive with
That’s actually really cool and I like how the leds in the front of the r8 curve with the front of the bumper. Both cars look amazing! And I love the vids keep it up!
It's hard to say which one looks better after these great installations! I agree, those would look really fly at nighttime car shows. I'm going out on a limb and say maybe the Taco is next😄
Good job with cable management. I still figuring out with mine. The difficult part is going through the tire struts. Trying to find out where to safely put the wire without interfering with moving parts.
On some cars it's almost impossible to hide... If in this situation, buy a piece of 90 degree angled plastic, mount it to the vehicle first, then mount the lights to the angled plastic piece. The lip of the plastic piece will cover the actual strip from being seen.
@@tonybrad2 No you can connect it right to the battery. Or use other wires to create your own plug. I just used the tails of a battery tender because that was perfect plug to use for what how I wanted to attach it
I think however you plug in the lights is the direct the lights will go when using those modes. Doesn't matter which length it is. As long as they are inline thats the direction they follow
I am not too much of a fan of underflow lights, they would attract too much attention here in Orlando, FL from other drivers resulting in lots of ricer flybys, getting cut off and brake checking. Nice job on installing the underflow lights! 😎
@@BrosFOURRSpeed There are plenty of car shows in FL too, but the ones at Hooters tends to have more muscle cars, vintage and modern. Hooters is an okay restaurant, basically a KFC mixed with Olive Garden and adding a lot more bosoms. 🤭 Longhorn Steakhouse is better than Hooters. I went for some delicious T bone steak at a Longhorn across the street from Hooters one time when the Hooters that was hosting the car show was packed. I enjoyed steak, soup, and chocolate cake in a nearly empty restaurant. That was a truly lovely meal.
noticed ur still using the stock orange side markers with a tint coating? u should try to take a look at iJDMtoy LED side markers, i got the clear one but theres smoked lenses too, i believe 2021+ GTRs came with it stock
So the iphone app allows you to manually turn on/off the underglow lights? Since the lights are connected directly to the car battery, wont that drain the battery when the car is turned off?
@@BrosFOURRSpeed Thanks, but can underglow lights work as puddle lights? They turn on when the car is unlocked and turn off when the car is locked, without having to use the iphone app?
It's easy enough to do it, you just have to splice the wires for the interior with the matching wires of exterior underglow lights. Or you could buy two much more expensive Blueghozt controllers and sync them together.
Tip - When working with LEDs, it's best to plug all of your strips up before giving them power. Plugging in strips to a controller that's already getting power can damage the lights. It also might not damage them, but that's the general rule of thumb when dealing with LEDs.
Use a relay. Tap into an accessory power wire. Use an on/off/on 3-position rocker switch, wire it so one on-position is for accessory power, and the other on-position is for a constant hot from the battery. That way you can keep it in accessory power mode so it only comes on with the key turned on, but then if want to be able to show your lights without starting the car, then you can just flip it into the other on-position and turn the lights on and off with the app.
LEDs draw power from the battery even when they're turned off. To keep them from draining your battery, buy a simple shut off device that will completely kill all power to the controller if the Voltage drops to a certain threshold. You could also just use a toggle switch and turn them off completely by flipping the switch to off.
Reminder - LEDs connected to a power source still draw a tiny amount of power even when they're turned off completely! This will not be an issue if you drive your car everyday, but if you don't drive it for 3-7 days the LEDs from the underglow will likely drain your battery. There's easy ways around this though.
Nope. I just did that so it wouldn't be connected to the car when I didn't want it to be. I hardly ever drive at night. So I only want it plugged in a few times
The 3M VHB tape on the strips is stronger than Gorilla glue. If installing to metal, you'll have no problem getting an excellent bond by cleaning with a degreaser and then 80% IPA. If adhering to plastic, zip ties are the best fail safe, but if you don't want to do that, then the tape can still work good, however if not using zip ties and attempting to stick the 3M tape to plastic, then you'll want to use 3M Primer 94 and then it will have no trouble forming a weatherproof bond.
My biggest question is with the wires going up through the engine there should be little to no problems? Or should I work around the Engine to the Battery avoiding contact with the metal and staying to the parts that won’t melt the wires?
Typical cost for an underglow installation is around $400. Most people's underglow kits will experience a failure in less than a year. A cheap 50V 1000uf capacitor placed in-line with the LEDs power and ground wire, along with a 33ohm-330ohm resistor on the data line is a secret to help LEDs last longer in a vehicle environment. I also run mine through a voltage regulator that takes an voltage from 8-40 volts and spits out a nice smooth 12V of power. LEDs don't like the voltage spikes in vehicle electrical systems. Installers will typically just take your money and do the minimum.
i got the same kit but my cars are old and its just the metal underbody of the cars and i cannot find a secure way to fit it to the car withoud drilling into the metal
@jakepace9315 Clean the metal with a degreasing agent really good, then clean it with alcohol really good, and the 3M VHB tape will have no problem holding up the lights. If you don't mind drilling directly into the metal, then you could also use zip tie mounts for extra piece of mind. But the 3M tape is very strong.
Is the battery tender on a switch some how? How do they not stay on when they car turns off I just got a set delivered from Amazon (govee underglow kit) I have a 07 cadillac dts but my battery in under the back seat what should I do?
My battery tender wires go to the battery. And I simply plug that end into the tender itself cable. These lights I connected to their own end that I ca plug into that same end used for the battery tender. So when the lights are unplugged, they have no power to them.
Hey man awesome video and I was wondering how you hid the light under the rear diffuser. I have a r35 and sadly only the rear diffuser section shows the strip when driving behind it
I didnt do anything for the rear. Just sides and inside the front bumper. There really wasnt a good place front and rear under the car. So I just did it the way I showed in the vid
Try using a piece of 90 degree angled plastic. Mount the plastic piece to the vehicle, then the strip to the plastic piece. The lip of the plastic will cover the actual strip from being seen.
Soo you can just conect + to + and - to - on battery and it wont burn wires? That is only reason that i search for this video i just want to make sure..
Our UA-cam channel is our full time job. Been doing this for 10 years. Been a business for about 5 years. We also live very simple lives well below our means. So it really doesnt take much to have a few nice cars. Actually just sold the GTR for a Lamborghini. But simple lives and a middle class salary go a long way!
Do you have a link to the app they use on iOS? I was trying to find the privacy policy for Oneup Lighting and their app that controls but all I can seem to find is a generic return address to a shopping center that does not have their name anywhere associated with it (with multiple websites using the same address). Their privacy policy for their website is different than the app and they don't seem to list the app used anywhere.
Nope. I just used the connection for it that way I don't have to leave the lights connected to the battery. I already had the battery tender hard wired to my car. So now I can still easily plug in the car when I'm not driving it. And then use the same connection when I use the lights
The texture shouldn't affect the 3M tape, if anything it could make it hold stronger. For plastics that are really smooth, 3M recommends roughing up the plastic a bit if possible, because the tape adheres better to surfaces that aren't completely smooth. The real key is to clean it really really good with a degreasing agent and then alcohol.
It's definitely up in the air. Depends on the color you run with and if a cop doesn't like it. I would avoid driving with any flashing colors, especially red or blue.
@@iCozzh That’s what I’ve heard! Probably go on sale late in the year. But I’m gearing up to buying one of those. As long as it’s not much more then the R35
@@RistyGucciAirEz only way to buy it in my opinion! Got bored with the automatic Supra. Haven’t had access to film one. Only people to film one it seems are the ones at the Vegas event.
The fuse in the battery connection is fine to keep things in check. You could tap it into a fuse in the car if you wanted to come on with the headlights.
@djcrazybeast5277 That's a really good price. Most shops I've dealt with charge around $80-100/hr for labor and they estimate the underglow install will take 4-5 hours. I guess it depends where you are located, and it probably pays to shop around. Did you get it done at a car audio shop?
Trying to film in pitch black just doesn't come off on camera. This is the lowest light I could film to where you can still see the car and not have a blurry fuzzy image.
@@BrosFOURRSpeed might be white balance issue or use tripod just really wanted see how bright they were not trying give you hard time found it very informative
Some places don't like this if it looks like cop lights. We can't have flashing red or blue while driving since thats what cop cars are. But other colors that don't flash are legal for us
@@BrosFOURRSpeedyeah that is totally understandable that you shouldn't look like a cop ambulance or anything to flashy but a simple constant light like green red blue pink should be legal on all cars.. or they should build it already on factory stock 😂
@@BrosFOURRSpeed so you have no reason? No actual justification on why you would suggest this over normal or higher quality led strips that would cost a fraction of the price and give double the length and dimming ect. ?
@@Itsjosby At the time this was a nice kit to test out and it worked very well. I havent looked at other kits since filming this video. Buy whatever works for your budget.
@@BrosFOURRSpeed the only difference is the chase pattern goes one way. The 6 piece chases both sides. If I could afford anything close to a gtr I would go for the extra 20$
@@garryoak Cool, I didn’t have room for the other two, so I choose not to install them. Doesn’t make a difference for me, I wanted to do it this way. Has nothing to do with money.
Looks really good. You did a good job.👍 Unfortunately, lighting like this is not allowed in my country.☹
Glad you enjoyed it! I wonder why that is!?
@@BrosFOURRSpeed I wonder too. 😄 The authorities in Germany think it could irritate other road users.
@@MauriceBln1 crazy. I’m not too sure the laws with driving with underglow on. But I think you can get in trouble with red or blue. But an amber color for us should be legal to drive with
Myne two... south africa
Sorry, but thats not stopping me😂 i def gonna do this
@@arche8986 Not true.
Nice job. The lights look good. The red and white on the R8 looks good. Like peppermint candy cane. That intercooler on the gtr is also Boss.
Thanks!! There are some pretty cool color options for sure!
This needs to come back. It’s like a shot to my childhood
Haha yeah, it was fun for a short amount of time.
@@BrosFOURRSpeedwhy only a short amount of time. Did the underglow stop working or become problematic?
That’s actually really cool and I like how the leds in the front of the r8 curve with the front of the bumper. Both cars look amazing! And I love the vids keep it up!
Yeah they came out pretty sweet! Certainly fun for some car shows and photo shoots!
It's hard to say which one looks better after these great installations! I agree, those would look really fly at nighttime car shows. I'm going out on a limb and say maybe the Taco is next😄
They both look great for sure! And the Tacoma already has lights! That was first! ua-cam.com/video/eO-WkNVYuUg/v-deo.html
Oops my bad 😁 I had forgotten all about that video!
@@kbw.rvwhntr 😉 Pretty cool mods!
11:04 that red and white fits the car 🔥
For sure! There’s millions of color combos in these kits!
They connect to
The car battery
Dude I paused the video to search something up and see ur comment after I did. What are the odds😳
This is the BEST I've seen so far.
Glad you enjoyed the video!
Wow. Very creative, professional installation! Great video guys!
Glad you liked it! It was a fun mod to work on!
Both rides are looking sick!! Those light kits really took it to another level 👍👊
Thanks! Super cool fun touch!
Underglow is definitely on my to do list when I get my R35👌💯💯 always had it on my nfs cars good times
Yeah this was a fun mod for the car! Super cool!
Dude I Am Still A Huge Fan of Your 2014 Nissan R35 GT-R Premium With I Am Like Your Underglow Lights Under The Pipe.
Thanks! Cool mod and such a fun car!
GTR + Underglow 🤔 I already knew what you grew up watching before you said it lol you living the childhood dream
Well this was a fun thing to try out and relive the fast and furious days lol. It was fun for the vid ;)
Love the battery connector idea, just bought that myself to try and put them on my car!
Thanks! Yeah its a great way to never have to worry about the kit putting a draw on the car. Great setup!
Where did you buy the connector? I’m in the UK.
Good job with cable management. I still figuring out with mine. The difficult part is going through the tire struts. Trying to find out where to safely put the wire without interfering with moving parts.
Oh thanks. Yeah just be careful with it
Quality work by you guys as usual made it come out great
Thanks! Fun project to test out!
You did it right. Golden rule followed, you can't see the actual strip👍🏽
Yeah! Seeing the actual strip is definitely not right 😄
@@BrosFOURRSpeed Absolutely, and yet so many people get it wrong
that bugs the hell out of me lol
On some cars it's almost impossible to hide... If in this situation, buy a piece of 90 degree angled plastic, mount it to the vehicle first, then mount the lights to the angled plastic piece. The lip of the plastic piece will cover the actual strip from being seen.
dude that looks so freaking badass, i cant wait to trick my car
Yeah this was a fun mod!
Awesome video. I’m gonna add this to my Maverick before I install the lowering springs!
My brother has a rock light kit he took off his Tacoma for sale if you are interested! Message on IG for pics and details on that!
@@BrosFOURRSpeed ok will do
im finna put this on a corolla🤣
Nice! Have fun with it!
Best be a GR, AE85, AE86, or AE92 lmao
I'm looking for a 01 astra lol
Im putting this on my AE92 GT@@Subieghost
Love how this exact kit is the same kit as the Govee one for like $50
Well they all will look the same. But long term quality is what your paying for
Can I bring my 17 hellcat to you guys so you can do this? Lol this was a phenomenal job fellas
Thanks! But no we don't work on other peoples cars. It's an easy job. Give it a try!
@@BrosFOURRSpeed do I need a battery tender kit to install this?
@@tonybrad2 No you can connect it right to the battery. Or use other wires to create your own plug. I just used the tails of a battery tender because that was perfect plug to use for what how I wanted to attach it
Love how the GTR looks🔥🔥🔥 it was dome tastefully 😍
Thanks! Super cool addition for the cars!
Had you used two short bar for the front and rear on the R8 could you have had it “follow” or “chase” from the center?
I think however you plug in the lights is the direct the lights will go when using those modes. Doesn't matter which length it is. As long as they are inline thats the direction they follow
Last question - are you using the battery tender connection to splice in the underglow system?
I am not too much of a fan of underflow lights, they would attract too much attention here in Orlando, FL from other drivers resulting in lots of ricer flybys, getting cut off and brake checking.
Nice job on installing the underflow lights! 😎
Lol yeah I wouldn’t drive with them on much. I rarely even drove at night. But cool for car shows and photoshoots tho 😎
@@BrosFOURRSpeed I miss going to car shows, especially the ones at Hooters restaurants. 😌🤗
@@waic1639 lol Ive never been to that restaurant. But we have so many car shows around!
@@BrosFOURRSpeed
There are plenty of car shows in FL too, but the ones at Hooters tends to have more muscle cars, vintage and modern.
Hooters is an okay restaurant, basically a KFC mixed with Olive Garden and adding a lot more bosoms. 🤭
Longhorn Steakhouse is better than Hooters.
I went for some delicious T bone steak at a Longhorn across the street from Hooters one time when the Hooters that was hosting the car show was packed. I enjoyed steak, soup, and chocolate cake in a nearly empty restaurant. That was a truly lovely meal.
@@waic1639 Oh cool. Longhorns pretty good for sure
Got a subscription from me bout to put them on my 97 tbird
Thanks for the support! That'll be cool!
noticed ur still using the stock orange side markers with a tint coating? u should try to take a look at iJDMtoy LED side markers, i got the clear one but theres smoked lenses too, i believe 2021+ GTRs came with it stock
Those would be cool!
So the iphone app allows you to manually turn on/off the underglow lights? Since the lights are connected directly to the car battery, wont that drain the battery when the car is turned off?
It shouldn’t, but that’s why I made the connection that way, so when I’m not suing them, they aren’t hooked up!
@@BrosFOURRSpeed Thanks, but can underglow lights work as puddle lights? They turn on when the car is unlocked and turn off when the car is locked, without having to use the iphone app?
@@harsha_mnathYou need a Blueghozt controller for that.
Do you know what would be needed to light up the inside of car and link it all together so they all light the same at one time?
I think they have an interior kit too. Might have to control it separately. However it could plug inline with this. Not too sure
It's easy enough to do it, you just have to splice the wires for the interior with the matching wires of exterior underglow lights. Or you could buy two much more expensive Blueghozt controllers and sync them together.
They both look really clean good job 👍
It was a fun project to work on!
When connecting it straight to the battery, do you have to disconnect the battery first or apply the positive first and then the negative?
Just connect the negative first, then the positive
@@BrosFOURRSpeed does it matter which way you remove them from the battery as well? Also thanks for the response and help!
@@noahhuraan5353 general take the positive off first. And put it on last
No problem!
Tip - When working with LEDs, it's best to plug all of your strips up before giving them power. Plugging in strips to a controller that's already getting power can damage the lights. It also might not damage them, but that's the general rule of thumb when dealing with LEDs.
Is it any way to turn them off on the app instead of disconnecting them
I think there was, but I just disconnected so I didn't have to use the app.
Looks awesome! But you didn't take off your bumper, you took off your bumper cover 😂
lol yeah most people use both words interchangeably
Hey is it better to wire the underglow to the battery itself OR another source where it only comes on when the engine is on?
I think what we did was the best! It won’t drain the battery when you don’t want them on and it’s easy to hook it up when you want them!
Use a relay. Tap into an accessory power wire. Use an on/off/on 3-position rocker switch, wire it so one on-position is for accessory power, and the other on-position is for a constant hot from the battery. That way you can keep it in accessory power mode so it only comes on with the key turned on, but then if want to be able to show your lights without starting the car, then you can just flip it into the other on-position and turn the lights on and off with the app.
Dose anyone know if you have a lease can you put under glow on your car and do you know any colors? That if you in NY
Technically you can do that. But when you turn the car back in. Make sure it's back to stock
@@BrosFOURRSpeedthanks that is the only thing I don’t like it about it
Yeah with a lease you can't do too much. Son't want to make any permanent changes
@@BrosFOURRSpeed I only have my car for 2 more years I really what to get Honda Civic Type R or a Camaro
@@zacrifice3520 New Type-R is a blast of a car! Defiantly a cool option. Love the V8 in a Camaro as well!
Won’t the lights always be on? Draining the battery with Bluetooth always running?
Nope! That’s why I installed them the way I did and explained that! When I didn’t want them on, I simply disconnected them to avoid that!
Do i need a fuse because I bought same item as yours
I just used on in the line I added just in case
Any issues with the kit after install? And how long did you have it running and on for?
No issues, maybe had it a year, just didn’t use it.
The last time I connected underglow to my battery it killed it, how can I keep it from doing that?
That's why I made the connection. So I leave it unplugged when I'm not using it. Plug it in when I plan on having it lit up
LEDs draw power from the battery even when they're turned off. To keep them from draining your battery, buy a simple shut off device that will completely kill all power to the controller if the Voltage drops to a certain threshold. You could also just use a toggle switch and turn them off completely by flipping the switch to off.
Does this work once you turn on the car and turn off once the car is off? Without doing it manually from the app or controller
It could but I didn’t set it up that way! I manually do that since I don’t use them often, I didn’t want them hooked up to the power all the time.
Reminder - LEDs connected to a power source still draw a tiny amount of power even when they're turned off completely! This will not be an issue if you drive your car everyday, but if you don't drive it for 3-7 days the LEDs from the underglow will likely drain your battery. There's easy ways around this though.
I bought the kit awail ago do you have to have that extra part for the battery
Nope. I just did that so it wouldn't be connected to the car when I didn't want it to be. I hardly ever drive at night. So I only want it plugged in a few times
@brosfourrspeed Would it be better to put some gorilla glue adhesive vs drilling the little anchors?
Maybe. But the small screws can easily be removed. You'd see a lot of glue residue if you did that route
The 3M VHB tape on the strips is stronger than Gorilla glue. If installing to metal, you'll have no problem getting an excellent bond by cleaning with a degreaser and then 80% IPA. If adhering to plastic, zip ties are the best fail safe, but if you don't want to do that, then the tape can still work good, however if not using zip ties and attempting to stick the 3M tape to plastic, then you'll want to use 3M Primer 94 and then it will have no trouble forming a weatherproof bond.
Super Useful ty
Welcome 😊 Fun project!
im thinking about adding this to my police cruiser.
Lol, it should already have plenty of lights!
@@BrosFOURRSpeed can never have to many lights.
@@CrashriMovieProductions would be cool!
Gonna put this on my 1993 honda civic 🔥🔥🔥
Cool!
My biggest question is with the wires going up through the engine there should be little to no problems? Or should I work around the Engine to the Battery avoiding contact with the metal and staying to the parts that won’t melt the wires?
I never had any issues. Just be careful where you route your wires
@@BrosFOURRSpeed thank you!
Where can u get something like this done at ?
You could always try yourself! But any local shop that does audio or electronics, maybe if they install lift kits, light bars, somewhere like that.
@@BrosFOURRSpeed bet thanks a lot
Typical cost for an underglow installation is around $400. Most people's underglow kits will experience a failure in less than a year. A cheap 50V 1000uf capacitor placed in-line with the LEDs power and ground wire, along with a 33ohm-330ohm resistor on the data line is a secret to help LEDs last longer in a vehicle environment. I also run mine through a voltage regulator that takes an voltage from 8-40 volts and spits out a nice smooth 12V of power. LEDs don't like the voltage spikes in vehicle electrical systems. Installers will typically just take your money and do the minimum.
Is there a car scene where you guys live? Maybe you should film some car meets or cars and coffee if your into that kind of stuff
We go to cars and coffees when we can! Used to film the events a long time ago, but we go now just to enjoy walking around and checking out the cars!
Dam it looks pretty dope thanks for sharing.
Thanks! Cool little mod for sure!
i got the same kit but my cars are old and its just the metal underbody of the cars and i cannot find a secure way to fit it to the car withoud drilling into the metal
Can you use 3M tape on the underside of the lights?
@@BrosFOURRSpeed I have t tried but I didn’t think I would have much luck cos I tried silicon and that didn’t stick well either
Oh dang. Normally 3M tape does well. Not sure the best way to go
@jakepace9315 Clean the metal with a degreasing agent really good, then clean it with alcohol really good, and the 3M VHB tape will have no problem holding up the lights. If you don't mind drilling directly into the metal, then you could also use zip tie mounts for extra piece of mind. But the 3M tape is very strong.
Is the battery tender on a switch some how? How do they not stay on when they car turns off I just got a set delivered from Amazon (govee underglow kit) I have a 07 cadillac dts but my battery in under the back seat what should I do?
My battery tender wires go to the battery. And I simply plug that end into the tender itself cable. These lights I connected to their own end that I ca plug into that same end used for the battery tender. So when the lights are unplugged, they have no power to them.
Does the lights drain your battery
Not with the way I have it to disconnect them when not in use.
i bought a car with light on it and i cant turn it off i was not told it had light looking for a switch
Look for the light connection, most likely on the battery and follow any wires that run from that, should help you locate a switch.
Hey man awesome video and I was wondering how you hid the light under the rear diffuser. I have a r35 and sadly only the rear diffuser section shows the strip when driving behind it
I didnt do anything for the rear. Just sides and inside the front bumper. There really wasnt a good place front and rear under the car. So I just did it the way I showed in the vid
Try using a piece of 90 degree angled plastic. Mount the plastic piece to the vehicle, then the strip to the plastic piece. The lip of the plastic will cover the actual strip from being seen.
In a winter in states that snows In a winter like, Pennsylvania/New York Will they still work in a crazy weather like that?
You'd think so
Soo you can just conect + to + and - to - on battery and it wont burn wires?
That is only reason that i search for this video i just want to make sure..
Yeah keep them the same on the actual battery
@@BrosFOURRSpeed tnx 👍
I might be blind but where it the link for the battery tender kit?
amzn.to/3JjCeft
Here yah go!
@@BrosFOURRSpeed Thanks you. Great video btw.
@@lipsofadon thanks!
Where do you get this “ connection wire “ whats it called please
The one I used on the battery? Part of my spare battery tender kit. amzn.to/3Xcf3JK
I just stumbled across this video. If you dont mind me asking, what is it you guys do for a living? I mean a GTR and an R8? How? Good for you though!
Our UA-cam channel is our full time job. Been doing this for 10 years. Been a business for about 5 years. We also live very simple lives well below our means. So it really doesnt take much to have a few nice cars. Actually just sold the GTR for a Lamborghini. But simple lives and a middle class salary go a long way!
Might have been a good idea to clean the surfaces first.
If you did, then you should still mention it as this is meant to be a guide on installing.
Cool now do mine!
lol fun project!
putting these on my camry trd😁
Oh cool! Fun mod
I literally just keep watching these to find out what to do with the extra wiring not hanging EVERYWHERE
We used a lot of zip ties and everything cleaned up nicely.
@@BrosFOURRSpeed that’s exactly what I did before seeing this that same night lol. Smaller ones. Tied to frames and away from tires was my focal point
You can also cute the wires and put them back together with a soldering iron if your comfortable enough
Do you have a link to the app they use on iOS? I was trying to find the privacy policy for Oneup Lighting and their app that controls but all I can seem to find is a generic return address to a shopping center that does not have their name anywhere associated with it (with multiple websites using the same address). Their privacy policy for their website is different than the app and they don't seem to list the app used anywhere.
It should just be scanning the QR code on the kit.
I would like to know could you tell me what's the name of your and where can I purchase I would like to install it on my 04
Link is in the description ;)
Is the battery tender necessary?
Nope. I just used the connection for it that way I don't have to leave the lights connected to the battery. I already had the battery tender hard wired to my car. So now I can still easily plug in the car when I'm not driving it. And then use the same connection when I use the lights
Are you guys able to install a kit for me and how much do you charge for installations
We aren’t able to do that, sorry! Hopefully this video can help walk you though it!
Install shops usually charge around $400 for underglow installation. Do it yourself.
The underneath of my car is textured. I have 0 clue how to install with the tape.
Hmmm. Anything remotely smooth? Any plastic or metal surface will work
The texture shouldn't affect the 3M tape, if anything it could make it hold stronger. For plastics that are really smooth, 3M recommends roughing up the plastic a bit if possible, because the tape adheres better to surfaces that aren't completely smooth. The real key is to clean it really really good with a degreasing agent and then alcohol.
So im wondering if its legal in texas been doing some reading some say it is some say its not allowed
It's definitely up in the air. Depends on the color you run with and if a cop doesn't like it. I would avoid driving with any flashing colors, especially red or blue.
i just got my boyfriend this for his birthday, he has a focus st and im trying to watch a video so i can help him install it
Very cool! That’ll be a fun project to work on together!
What is the brand of the led light
All mentioned in the video and description with the link to the product
Are these lights waterproof?
They are!
Where did you get the underglow?
Linked in the description and stated in the video
So sad the gtr is nearing its end on your channel love the personal content of your own cars more so than the reviews of random newer cars
GTR will still be here another year at least. But with an R36 coming out next year, it’ll be time to upgrade 😎
@@BrosFOURRSpeed its coming out next year? I didnt even know any details were out
@@iCozzh That’s what I’ve heard! Probably go on sale late in the year. But I’m gearing up to buying one of those. As long as it’s not much more then the R35
@@BrosFOURRSpeed cant wait to see it dude
Good video bros 4 speed
Thanks! Fun mod!
I'm aboutta make this 2010 Dodge Journey into something special dog.
Oh fun!
Nice 👍👍
Thanks 👍. It's a neat mod to use every now and then!
is it safe for car wash ?
Yeah, you can drive in the rain as well.
I wish I could have this on my car but this is banned in the uk 😢
Yeah I'm not too sure the legality of this. I think for us, as long as it's not red or blue I think we can have it
So clean my engine before installing?
Yeah probably would help. Mines always clean lol
are you still going to buy the new Z?
Of course! Just waiting on Nissan to get them to dealers
@@BrosFOURRSpeed I hope you’re getting a manual :) I’m surprised you guys haven’t reviewed it yet.
@@RistyGucciAirEz only way to buy it in my opinion! Got bored with the automatic Supra. Haven’t had access to film one. Only people to film one it seems are the ones at the Vegas event.
Using a snake was a really good idea.
Definitely helped!
no fuse needed?
The fuse in the battery connection is fine to keep things in check. You could tap it into a fuse in the car if you wanted to come on with the headlights.
@@BrosFOURRSpeedthank you, nice connection very clean. 😊
Can you get this done by a mechanic?
Maybe. But most shops don't do aftermarket stuff. A lighting shop that does car audio/stereo might do it
It cost $400. Do it yourself is my advice.
@@imdbtruth I paid 150 to get it installed
@djcrazybeast5277 That's a really good price. Most shops I've dealt with charge around $80-100/hr for labor and they estimate the underglow install will take 4-5 hours. I guess it depends where you are located, and it probably pays to shop around. Did you get it done at a car audio shop?
1:42 Ok, I'm already worn out! Off to the shop to let a Pro do it.
lol it's not that hard
How do I just pay someone to do this?
Find a local auto shop that could do that in your area.
I found a lazier kit that plugs into my car’s cigarette lighter port so its a pain but I dont have to soder any wires or take anything apart (mostly)
No night video? 🤦🏻♂️
If you watched the whole video, you would have seen night shots..
@@BrosFOURRSpeedI did... that was barely dusk... Dark parking lot with both cars! NIGHT TIME past Mom's curfew 🌉
Trying to film in pitch black just doesn't come off on camera. This is the lowest light I could film to where you can still see the car and not have a blurry fuzzy image.
@@BrosFOURRSpeed might be white balance issue or use tripod just really wanted see how bright they were not trying give you hard time found it very informative
Well we did the best we could with our cameras
Dont understnd why its illegal in europa :( i want it so bad
Some places don't like this if it looks like cop lights. We can't have flashing red or blue while driving since thats what cop cars are. But other colors that don't flash are legal for us
@@BrosFOURRSpeedyeah that is totally understandable that you shouldn't look like a cop ambulance or anything to flashy but a simple constant light like green red blue pink should be legal on all cars.. or they should build it already on factory stock 😂
@@yoshieejosh624 Yeah for sure. Great for night time car shows or cool photos at least!
Tried this on my car and the control box burned. Now bought 4 battery underglow boxes. Much better easier to install
Oh wow. Yeah anything with electronics can always have it's issues
But how long will it last?
I would think several years, these are Led, so they should last a long time.
I’m gonna get this illegal or not once I don’t drive while it’s on it’s okay
Definitely depends on your state. Some cops may say it's illegal, others may not car. Just don't have flashing red or blue
Just don't do red in the front, most states at least have a law regarding that.
So the way it looks I’m paying a professional to do it when I get it done
Yeah just depends on your skill
True
Why are you suggesting people spend this much like 300 plus on what fuggin 8 maybe 9 ft of led strip?
Buy what works for you ;)
@@BrosFOURRSpeed so you have no reason? No actual justification on why you would suggest this over normal or higher quality led strips that would cost a fraction of the price and give double the length and dimming ect. ?
@@Itsjosby At the time this was a nice kit to test out and it worked very well. I havent looked at other kits since filming this video. Buy whatever works for your budget.
Is this not illegal?
only if they catch you bud
Check your local laws. Where I live in Texas it's completely legal, as long as you don't display red on the front.
Bro please do in a Lamborghini because I want one in my Lamborghini please
Ehh, not really into doing that again.
@@BrosFOURRSpeed its all good
@@LIMITED_ACCESS-w it’d be cool. But I hardly drove at night and don’t really want to modify the Lambo
Illegal where I live
That’s interesting! Most states should allow this.
Illegal in Serbia too 😭 Law says it's too distracting to other drivers
Lame af
dang!
@@BrosFOURRSpeed Imma install it anyways, alongside killswitch, so turn off while in city, turn on between settlements 😁
@@DJSickey yeah could work. At least you could use it for car shows. And just shut off for driving
After watching this I'm craving a large bowl of rice
Lol. Nothing wrong with a fun mods for photos and car shows 😅. Hard to have a 700 HP GTR that walks all over every other car rice 🔥
@@BrosFOURRSpeed just messing with you guys. It did look pretty cool at the end
@@babyyoda8195 it’s a fun mod for some pics and shows for sure 😅
😏😏😏😏😏😏😏😏😏😏
Cool mod!
That's a 4 pc underglow. C'mon it's a gtr get the 6 pc, they must be the 42in 25in
I have the 6 piece kit, but only choose to use 4, what’s wrong with that?
@@BrosFOURRSpeed the only difference is the chase pattern goes one way. The 6 piece chases both sides. If I could afford anything close to a gtr I would go for the extra 20$
@@garryoak Cool, I didn’t have room for the other two, so I choose not to install them. Doesn’t make a difference for me, I wanted to do it this way. Has nothing to do with money.
Puts lights on a gtr... alright lets do it to the r8 now 😅
It’s was neat, but we ended up taking them all off.