Best 3/8 Cordless Ratchet? Milwaukee M12 vs Makita, Earthquake & ProStormer. Let’s find out!
Вставка
- Опубліковано 31 тра 2024
- BRANDS TESTED: Milwaukee M12, Makita, ProStormer, and Earthquake (sold at Harbor Freight). Which battery powered 3/8 ratchet is best? Let’s find out! Ratchets tested for high and low RPM, maximum torque, no-load run time, continuous load performance, and use without battery. All ratchets use 12 volt lithium batteries.
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Makita: amzn.to/38ohaT0
Milwaukee: amzn.to/3a96Duu
Pro Stormer: amzn.to/3oCdqoR
Earthquake: amzn.to/32lz1pO
Laser Tachometer: amzn.to/3ozdINn
Sound Meter: amzn.to/3uM7WsB
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/2SvwQdS
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC - Навчання та стиль
Publishing videos on Sunday seems to be working well for most viewers. A big thank you to Jim for putting together a quick access video library, which includes a list of products tested. bit.ly/2FCrBpk Please let me know which other brands you'd like tested for the round 2 video in the future. Looking forward to reading your comments and your future video suggestions! Best regards, Todd
How about home depots Husky 12v ratchet see how it does
@@TheWathever516 Bit late now really and being Home Dumpo we can pretty much guess where it'll finish yea
How about a comparison of who does the most informative, intelligent & quickest video, between Project Farm, ChrisFix, Rachet & Wrenches & Scotty (Mr. Tennessee) Kilmer?
+1 for the Husky ratchet!
@@CathodeRayNipplez And where would that be?
I was a small engine mechanic. I hammered a Milwaukee 3/8 ratchet daily. It was awesome. I was diagnosed with Kienbachs disease. The ratchet gave me the ability to continue do the work I loved up to the point where I couldn't pick the tool up anymore. I miss my old Milwaukee ratchet at my old employer. I am going to buy one of these so I can fix peoples lawn equipment as a community service. Small engine repair was the most rewarding job I ever had. I love picking up mowers on the side of the road, fixing them and giving them away. Normally doesn't cost hardly anything and their are plenty of people that need a mower. Plus it keeps good equipment out of the scrap yards and landfills.
Get the Fuel version of the Milwaukee. 55ft/lbs and a beefier head, can be used by hand.
Your community is damn lucky to have you.
Good soul
Bless your soul
Keep up the good work.
My man sat there for 30 straight minutes holding a trigger and listening to ratchet noise for us. That's commitment.
Thanks! 👍👌✌
You are welcome!
He does make money doing so you know? A cashier listens to the sound of a register beeping for 8 hours a day and probably makes a lot less than 30 minutes of ratchet noise. Just saying...
@@supremekizzle In my opinion, 80% of the cashiers you are pointing doesn't have a choice but to do their job to make money. This man is having the same exact energy and enthusiasm from start with few subscribers up to this very moment. I think you are new here because reading your comment, I can feel your hatred and jealousy. Pathetic!
@@cerdickjohn2385 there's no hatred or jealousy at all. I'm just saying that 30 minutes of ratchet noise isn't that bad in comparison to other things. Especially when you factor in the amount of money that's being made. No need to call me pathetic and turn this into a name calling session.
@@supremekizzle you still don't get it. Even after everything the other people told you, you still don't get it.
I’m so impressed with your meticulous testing that I NEVER make a tool purchase without educating myself with your videos.
Thanks for sharing!
Same here. Cheers brotha
Sameeeee. 🤣🤣
same here from Mumbai India
Same here
This is one of the most valuable channels out there...
Thanks so much!
I agree 1,000%
Project Farm T-Shirt idea: Project Farm: 'We're going to test that.'
Seriously good work sir.
That goes well with his "Let's find out"
Thanks so much! Thanks for the suggestion.
I'd buy one!
I’d buy one!
Yep. I'll buy one. Be a fun way to support one of my favorite channels.
Manufacturer: *makes bold claim*
Project Farm: “We’re going to test that!”
Manufacturer: *sweats profusely*
I really do think lock picking lawyer and project farm should do a colab
why no Hitachi?
Stewie J I would be in high favor of that. LPL can test the lock picking aspect and mechanism of a lock, and Project Farm can put its durability and functionality to the test!
@@ericknyevz3840 I’ve found hitachi has been selling all their products particularly small tool line and accessories under a different brand now , they are strictly focused on heavy equipment
Thanks for watching!
I really enjoy watching your videos. The time, effort, and thought you put into them is "quite impressive". Keep up the good work.
Thanks for the review. I had procurement purchase me the Milwaukee M12 3/8" ratchet for work and honestly, I cannot believe I lived so long without one. Makes installation and maintenance work so much easier. Though I do occasionally have to break the nut first with a manual ratchet/breaker bar, the ratchet just zips it off where an impact gun cannot reach.
Thanks for sharing!
You can still use the Milwaukee ratchet to break the bolt loose Just don't squeeze the trigger, just use it like a regular ratchet.
@derekcarpenter5394 I do sometimes if it's not too locked up, but I rather not put that much torque into the M12. I have blown out manual ratchets and breaker bars in the past.
The "Must Have" for viewers isn't the tool, it's your channel! Thanks for all do!
👍
I’m excited every time he posts a new video!
Thank you very much! It means a lot coming from you. Your product reviews are awesome!!
@@ProjectFarm I must have your channel. Password please!
@@gteaz Right. Like he'll give it to you...
@@denniszhaunerchyk6191 my pocket got exhausted though lol
It's nice to see a genuine nice person making it successful on UA-cam well done!
Thank you 😊
@@ProjectFarm I'll 2nd THIS ANYTIME!
Yup
Yes
Truth.
Project Farm: A prime example of the difference one committed person can make.
Thanks for another great test, and thanks to Jim for creating and posting his spreadsheet, with links, of the items that have been tested, and the dates the tests were posted, which makes this great information even more accessible.
Yea he really is one of the top reviewer, if not the top on all of UA-cam
You had me at Milwaukee. I want this guy to review all the tools!! He's extremely thorough and informative with his videos! Big like and a definite subscription from me. Keep up the great work bud.
Thanks, will do! Thanks for watching and subscribing!
Mfg: makes claim.
Project Farm: " We're going to test that!"
Mfg: "oh shit."
Shots fired! haha
This reminds me of The Lockpicking Lawyer channel.
@@MMSieBreeze I think PF and LPL would get along well.
Should see whos got the best grease guns on the market. I'm currently using a Lincoln 1134 but am curious on what other brands would preform better.
I use my Milwaukee 3/8 electric ratchet everyday working on vehicles. I absolutely love it. Plenty of power and haven’t had a problem with it in 5 years!
5 years--impressive!
Love your profile pic
Same for me at around 4 years now, and I have dropped the thing so many times.
Yup, Mines been soaked in coolant, Oil and going on 3 years without a hitch.
Ive watched a few of your vids. No BS, just tests, to the point, no bias. Love it! Youve earned a suscriber!
Just ordered the Milwaukee!
Welcome aboard! Thanks for watching and subscribing!
I got several M12 tools saber/multi/expander for pex pipe always been amazed with battery work time///and long life...i was not surprised with your outcome...thx for another job well done...
YOU DESERVE all of your success and I hope you get even more of it. Great job.
Thank you so much!
I subscribed to this channel because of this comment I love this channel
Absolutely. He has a somewhat secret second family to take care of aswell so let's hope he is doing good enough earning to pay for both families.
"Playin ain't cheap..." Haha but it's fun at first
Todd, The only thing I pissed about is I can’t click the like button multiple times on all your videos.
Also, Love how you just get right into it, no fluff music and 30 second intro. 👌👍👍
Thanks so much!
Love how your have grown the channel to still be very Informative. Seems to me Milwaukee is the best for price out of them. Was looking for one of these Rachet’s, so I guess that’s what I’ll get. Ty!
I love the videos, the tests simulate real-world conditions we run into all the time. Breaking loose by hand, spinning off partially seized or rusted fasteners, hot and cold conditions. I've been using the Milwaukee m12 brushed ratchet for six years now as a professional HD truck mechanic. Two years ago it gave me a burning smell but is still working to this day. I love its compact size with the 2.0ah battery. The rubber grip has swelled and fallen off but the tool keeps working. Some of the more powerful m12 tools like the right angle impact and the compact 3/8 impact really benefit from the 4.0 battery. True and fair comparisons have to have similar battery voltage and amp-hour ratings. The Milwaukee ratchet would have been more compact and given different numbers had the 2.0ah batteries been used. The price of the ratchet with two 2.0 batteries is also much cheaper giving it more value per dollar.
Thank you for the feedback!
SOOOO much better than Consumer Reports ever THOUGHT of being. Fantastic channel !
Thanks so much!
@@ProjectFarm Could you test and review bench top wood planners? WEN, DEWALT, RIDGID, MAKITA, and PORTER-CABLE. Im curious on blade longevity and accuracy.
And no Politics.
@@snhurst1989 that would be a $10000 video just to start filming. and blade life is subject to the wood your cutting.
Love the videos! Very well done and thought out!
Only thing I’d curious about is a tool breakdown and component inspection for overall quality.
My fiance is seeing a trend...she started to catch onto the videos and my purchases. They correspond so close that I already got a text saying I dont need a new tool.
lol
Dude has a knack for picking tools we are actually considering. Think I'll wait longer on ratchet, ratcheting a bolt on/off is a non-issue 90% of the time if you take care of things and oil the threads before insertion. It's breaking them free that kills my arms and breaks my ratchets, so I'll wait for a good battery operated solution for that.
@@eideticex he tested the junkiest bunch lol. Milwaukee makes a way better ratchet than this one. I use it way more than my impacts if it's not a high torque bolt requiring half inch. My 3/8 M18 impact doesn't get used much anymore.
@@eideticex right! I generally use the excel spreadsheet when im out shopping for a tool. PF always comes in so clutch!
Oh, you have a financece’ too? 😂🤣😂
I love my Milwaukee more than any other tool in my shop, what a lifesaver. After about 8 years of medium/heavy use I have only changed out the ratcheting mechanism once just recently. I haven't yet used my new H.F. Earthquake I bought on clearance on a whim as it weighs a ton and a half. Goodness. I am really considering a Prostormer as a backup in my toolbox for for junkyard runs. Excellent video, keep up the good work.
Thanks, will do! Thanks for sharing.
man i must complement you for the work you do to drive your channel.. you are the first place i go to search for comparisons, and ive sent others here and have shared your content in facebook groups.. keep up the great work sir.
Thanks, will do! Thanks for sharing the channel!
I love this guy, i always watch him before I go buy a tool.
Thanks for watching!
Same lol i work at a part stor n i use his videos to help ppl
Same. Saves me time and money. Thank you
@@ProjectFarm Can you do a comparison of high torque impact wrench wireless tools please.
Same here
9 times out of 10, I’m only watching these to confirm I chose the right team to buy matching tools from 😂
Same
As someone from Milwaukee, I always root for it in every video
@@laurens.7938 I always root for the least expensive one so I can save some money lol
@@plaid11 hahha that's a good idea
@@plaid11 go harbor freight!
Super informative I love how in all your videos you really do not show a biased opinion. You just give us the facts and let us decide what would be best for our particular applications
I appreciate that! Thanks for sharing.
This was the best tool test i have seen yet , I have been on the market for one of these and you helped seal the deal for the Milwaukee !
Thanks for sharing!
This is how tool comparison videos should be made. No bias just data. Here's a like and a subscription. Keep up the good work.
Thanks, will do! Thanks for watching and subscribing!
👍🏾
He is the man no bs at all !! Best I've ever seen !!
This guy needs to be paid for all his work and being honest about everything great job thanks for all your work 💪!! And time !!! Much appreciated 🙏
I agree with you, but a little bit slower would be nice sometimes. I'm using hearing aid and sometimes it goes a little bit too fast
YOUNG MAN YOU HAVE THE MOST PROFESSIONAL, ARTICULATE, INTELLIGENT, AND WELL-PRODUCED CHANNEL ON UA-cam! YOU KEEP US SENIOR CITIZEN DIYER'S FROM WASTING OUR HARD-EARNED MONEY ON PRODUCTS THAT DON'T WORK! GREAT JOB! KEEP UP THE GREAT WORK! GOD BLESS YOU! BEST WISHES FROM S. OKLAHOMA!
🎅🌅🗽
Thanks so much!
If you want people to read your comment you should avoid using all caps.
@@jaydunbar7538 MR. DUNBAR MAYBE WHEN YOU REACH 63 YO YOU WILL HAVE ENOUGH WISDOM TO REALIZE THAT IT IS EASIER TO READ LARGE PRINT ON THESE LITTLE CRAPPY LITTLE CELL PHONE SCREENS THAN LOWER CASE! GOOD LOOK WITH YOUR LEARNING PROCESS!
🎅🌅🗽
@@jameslance4782 ill refer to my first comment, still not going to bother reading it.
@@jameslance4782 don't worry I read it just because it was in all caps
Looking to add speed and less fatigue in my projects and was favoring the Milwaukee because I see so many mechanics videos using their product. Your video took the apprehension out of a big dollar purchase. Thanks again for an unbiased test on all brands of tools
You are welcome!
I don't comment alot but as a maintenance tech always looking at tools you always have the absolute best tool reviews and comparisons. Thank you for all you do!!
You are welcome!
Let’s tests metal detectors!! I’ve alway wanted to know which ones can find gold and silver the easiest.
This would be a great video
I feel Whites would win most categories.
Thanks for the video idea.
Great idea!
That's going to be an expensive test. ... You know for the one ounce of gold that needs buried at different depths. ;)
This guy has a simple channel, but he's just so amazing and detailed.
Thanks!
@@ProjectFarm you do a great job man thanks
I LOVE your videos. Nothing but raw data. No bias, no opinions. I do kind of wish that your test milwaukee had the 2 amp battery like all the others to level the playing field.
Thanks! Thanks for the feedback.
Awesome video and enjoyed the no-nonsense pragmatic approach! I subscribed as well. Since this video was made a year ago, I will be viewing your channel to see if you have a more recent version of this video. Thanks for the efforts !
Thanks! Thanks for watching and subscribing!
As far as I'm concerned, you are the best thing on UA-cam.
Seriously... Thank you for all your hard work in doing what you do. Giving much respect and gratitude your way.
God bless you and yours......
Wow, thank you!
I'm on facebook marketplace and craigslist way too much and can't help but buy way more tools and equipment than I should, whenever I find an amazing deal... and at least several people I've met have said they love watching Project Farm and greatly appreciate your honest reviews.
You know what... You are quite inspiring as a teacher, and it's a break to watch your videos. I thank God for your life and hope you keep up.
Wow, thank you very much!
This is by far the best comparison I have ever watched.thank you
Before anything I would like to say thank you for your service. 2nd we all appreciate everything you have done for us. May God Bless You and your Beautiful Family.
Thanks so much!
Maybe add the Milwaukee fuel ratchet to a follow up test
Great recommendation! Thank you
Fuel one makes alot more sense to buy nowadays, as it's almost same price but packs a bunch more torque and is built with more thought.
The fuel vs the snap on would be a good one.
@@ProjectFarm also the husky from home depot currently 59.99
Battery encased in tool so you can really pull on it
@@ProjectFarm id like to see if the long neck fuel ratchets have any better or worse performance than the standard ones
I never knew how much I needed one of these until my brother handed me his ( I was using regular ratchet) to finish taking off the bolts of the oil pan on a Peterbilt. Can't wait to finish the video later!
Great feedback. Thank you
Same with me.. ALWAYS used a regular ratchet over the last 25 years..got a cheap earthquake at a pawn shop for $25 with case and charging station to see if I liked them, best thing I may have ever bought! Lol
Not only that but the bellhousing bolts on a Peterbilt they are a pain in the rear especially the top ones you can’t even see
I have been buying many of my tools as of late, based on your tests, including the Milwaukee 3/8 M12 ratchet. Love it!!! Thank you for your great work.
Thanks and yo are welcome!
Todd my dog! You did it yet again! I’ve been in the carpenter business for years and have had the top tools for that because of you and just today I started working on my VW something I rarely don’t do because I have little knowledge (not my trade) and realized i needed an angle ratchet because none of my impacts or drills fit so this helped me make my decision based on the info and my budget thanks again man!
You are welcome!
“Delivers the power of air”
“We’re gonna test that”
Missed opportunity
Lol!
@@ProjectFarm hahaha that was great !
@@ProjectFarm That should be your motto . "We're gonna test that !"
@@ProjectFarm I do love the variety of tests, but what was your verdict of "delivering the power of air" both for the tool that said it and the group of tools. I don't have a professional need so I probably will go with the prostormer unless I can find a deal on the Milwaukee. But still would like to know you final opinion on the statement.
I agree, Id love to see some Air tools tested.
Why do i get excited every time he says " we're gonna test that"
Thanks for the positive comment!
Word!
Push it to the limit 🥊
Your professional and meticulous approach to testing is the best I have seen on an ongoing basis. 👍
Wow, thanks.
I alway findd your reviews much more creditable and convincing, more importantly, straight to the point, compared to the other channel which is confusing.
Love the content you’ve saved me 100s of dollars and unbelievable amount of time. Thanks project farm!
Awesome! This means a lot to me. Thank you!!
@@ProjectFarm hi
@@ProjectFarm I agree the same thing has saved me as well I love your videos
I agree. Before I go and buy a lot of items I check to see if he has done a video on it.
Well, I admit I plunked down my $$ on the Earthquake. It works OK but I'm not a heavy user. I did buy a second battery, however.
"the earthquake seems to be making more vibrations as well"
I mean yeah, that's what earthquakes do no?
lol Thanks for watching.
Lol
Straight data...no bias. Saved so much time by watching this review! SUBSCRIBED!
Thanks! Thanks for watching and subscribing!
My Earthquake ratchet sparks when I use it so it doubles as a fire starter too! Super ingenious of them to make it a multi-tool. 👍
I will never ever buy anything without watching your video about it. Your super clean, perfect and non sided reviews really made me avoid the brands that just sells cheap toys. Thanks for making content like this, every place on earth needs someone like you for product review.
Thank you very much!!
It’s good to see that even on a budget you can get a competent tool but also that the higher end brands aren’t simply charging more for the same and can back up their price difference.
You'll probably find that some of the low end tools are actually made in the same factory as some of the top end ones with merely cosmetic or battery differences.
Conclusion -- Milwaukee is the best!
@@FrozenMermaid666
But is it the best value? If you are not a pro user, maybe not.
I love your videos. There is no fluff, filler or BS. Just hard facts. Well done and thank you.
Thanks and you are welcome!
One of the best tool comparison videos I’ve ever seen. Nice job!
Thanks so much!
Glad the Milwaukee proved itself. I've had mine for a month now and it's been great at work. Well worth the price of admission.
the brushed model like shown or the brushless fuel model?
@@AndrewBrowner I honestly don't remember. It takes the M12 batteries. Thing last forever and works great for everything I throw at it. I've been wrenching for 14 years. I previously had the little Amazon shitbox special Kimo unit and that literally caught fire within a month. JUNK.
This thing is great for everything. Break whatever loose with a breaker bar and spin it in or out with this. Saves a ton of time instead of sitting there with a gear wrench or a ratchet moving it a hair at a time.
Thanks for sharing.
I got the brushed non-fuel model... really like the tool. Great at assembling things. Would be interested to see how the Fuel model does in this test. The head is a lot bigger.
I would like to see some ear muffs tested. You could use a dummy head with holes drilled in the ears to measure the noise levels.
Plenty of dummy heads in my area, and you don't have to drill holes!
Thanks for the video idea.
@@ProjectFarm haha use Billy Ray Mullet again :)
@@antonchigurh6590 I think he is totally fucked at this stage.. 🤣
Great analytical review and comparison! I don’t normally watch videos like this all the west through but I did this one
Thanks!
Great review! I can’t believe the work you put into this. Cheers great job
Thanks and you are welcome!
I need a t - shirt with "we're gonna test that" on it.
You’re gonna have to get into SnapOn, Matco, and Milwaukee Fuel for this.
Thanks for sharing.
For sure. The brushless Milwaukee is the tits.
He didn’t do it because it’s expensive. He likes em cheap, shame. Unsubscribe
@@kim4548 Lmao. Or maybe his audience is more likely to buy the cheaper ones. Bye bye ass hat.
Well I can tell you from experience that the snapon one is noticeably faster than the earthquake (I have the EQ while another guy at the shop has snapon) While we both agree his snapon is the superior tool neither of us really thinks its 6 times the price superior. both get the job done though.
we havent really compared torque as thats not really something we value for this specific tool. Its more spining on or off nuts and bolts when we have to take alot on or off of a motor we are repairing, particularly ones in tight spots. If we want high torque we pull out a real impact gun.
I have the FUEL extended ratchet from Milwaukee and I absolutely love it. It’s a beast. Good info!
Thanks!
Thank you so much for the work you put in! I've been wanting to buy one of these for almost a year now and it's been difficult to find any in stock so now I'm just going to buy a Milwaukee online knowing that I'll get a good tool whenever it finally does arrive 🙂
You are welcome! Thanks for the feedback.
Bought the prostormer about a year ago at o'reilly for $50. My absolute FAVORITE tool I own. I use it more than anything and it has saved me HOURS and many curse words sitting there trying to get bolts off with a normal ratchet or wrench.
Great feedback on the ProStormer
"Let's get the project underway" seems to be the tag line you've chosen for your apparel line, but it seems to me that you're more famous for "we're gonna test that!"
this world yearns for reliable and accessible verification of claims. This guy could work for Consumer Reports and really get something going. Not that I don't love what he has done here.
I've never seen such a great quality video as well as narration before that was so detailed. I loved this video and im definitely liking and subscribing .
Thanks so much! Thanks for watching and subscribing.
Todd, thanks as always for your thorough tests. After long wanting one I have pulled the trigger - so to speak - on the Milwaukee. Can't wait until it arrives!
Thanks for sharing.
You’re probably one of only like three youtube channels that I still get excited for every time they release a new vid! Love that you’re doing some comparisons on more expensive products now!
"we'll see how that impacts things in just a minute"
har har har ;)
lol
LOL, another good "Project Farm" cliche is "Were gonna test that!"
when-ever he reads a claim on the package hes not sure if he believes or not. so funny ;-)
These tests are really well designed, with excellent descriptive narration. Comparisons are clear, variables are considered. I love this video. Shame that everything is made in China, but kudos for including the source information.
I really appreciate you doing all the bolts with the ratchets. Too many people do a single bolt a see that as a test
Thanks so much!
I have learned so much from your videos and I want to finally take the time to thank you for all of your work. Watching your channel first before making a purchase has been a valuable tool.
I swear this is one of the most informative and entertaining comparisons videos ive seen so far. Very fast and to the point...objectively..thank you sir.
Thank you very much!
Just came across your channel & I'm now a follower. Great attention to detail & I can't wait to see what all videos you have & what's to come!
I went through your older videos but couldn't find one on right angle drills, which is what I'm currently in the market for & what drove me to finding your channel. Have you done a review on this yet & I possibly missed it?
Once again, great format & excellent attention to detail! Your videos are much appreciated! 👏 👏
Great comparison test as usual, Thanks PF, and thanks for the excel video file also. I noticed no tests for jigsaws. I've had expensive ones like Porter Cable and cheap entry level ones like Skill and there is quite a difference. User skill level with this tool makes a big difference but it still could be an interesting test. Thanks again PF 👍🏼
As a professional mechanic I’d say the Milwaukee is a must have. Great warranty and performance. But my buddy has an earthquake and it’s hold up great as well.
Great feedback
I have one too and I love it. The big 1/2 Milwaukee impact is a beast too.
I also got a few Milwaukee tools and they work great!
I have both and use my earthquake more...like everyday and took my milwauke home more.. I like the length of it.
I know you get this all the time, but OUTSTANDING presentation Sir! Thank you so much for your thoroughness and TIME!
You are very welcome
Thank you for testing tools. I'm working towards a tool box entirely full of Milwaukee brand tools for my shop. Definitely enjoy watching the tests.
Thank you!
Another outstanding video. This is one of the best tool channels on YT. Keep up the great work.
Thanks, will do!
Watching your channel is definitely one of the high points of YT for me. I always learn something, and often it is something that is useful to me. Thank you very much for all the effort you put into educating us.
I appreciate that!
This is the only channel I always give a thumbs up. Every video is very informative; and well, I want Project Farms to get all the benefits it deserves!
Thanks 👍
Thanks for the video - all the info I needed - relevant, accurate and realistic. Much easier than sifting through a million reviews/rants.
You are welcome!
Best reviews on the net, you guys have nailed it.
Id like to see battery operated grinders, Harbor Freight, Dewalt, Makita, Milwaukee, etc. See who can cut the thickest steel, who
has the longest battery life, etc
Thanks for the video idea.
@@ProjectFarm What if we included higher brand names such as Snap-On or Blue Point? Not to brag but we Marines use Snap-On and Makita, rarely Blue Point. Other products such as CDI Torque are most of our torque wrenches. Could there be a torque wrench torture test?
I'm in the market for a drill. Would love to see him pit the big brands versus the Bauers and the like.
@@bamleonti468 Snap-On quality has gone down in recent years, but their prices have stayed high as can be because of their past reputation. There is already a video of a Snap-On vs Harbor Freight torque wrench test ua-cam.com/video/ck_O5U1Tyz8/v-deo.html. BLUF: Snap-On didn't do as well as Icon
Ryobi has one for around $60 and 4ah batteries are available.
"we're going to test that!" -- love it when you say that :)
Thank you!
Excellent review. You did a great job offering an unbiased and balanced review. Great video.
Thanks so much!
We're going to test that!! Absolutely my favorite part!
Thanks!
I'd be interested in a follow-up on the FUEL version vs. the regular Milwaukee. (I have the FUEL 3/8" and really like it)
Great suggestion! Thank you
@@ProjectFarm I also would like to see the Fuel version tested. I'm in a Facebook group for Milwaukee tools and alot of mechanics actually prefer the non Fuel version because the ratchet head is smaller. Also Milwaukee makes a 2.0ah 12v battery that I prefer because it is as slim as the handle of the tool. Thanks for your work Todd!!!
I agree with previous replies, would like to see the Fuel version tested. I also use the cp3.0 or cp 2.0 batteries because they are slimmer.
Great idea!
I have an m12, my buddy has the fuel. As expected it’s a bit more power but the head is too big for tighter spots. I prefer the m12.
You’re awesome on your reviews on actually testing the products in every form.
Your channel was recommended about a year ago and have been watching since then.
I look forward to seeing your videos whether I’m in the market for the item or not 👍😊
Wow, thank you!
Great video, now I know what to get. You saved me a lot of headaches trying to figure out what to buy, and me having to watch 50 other videos. Thank you sir
You are welcome!
Project Farm-- If I'm going to buy a Tool of any kind, I check here first, best comparison of Tools around, and I always learn something more about the designs and function of the tool as well, Fantastic Job Project Farm !!! Please Keep up the great work!!!
Also still really want to see a 1/2" impact comparison. Keep up the good work, love the channel.
Yes, show us something that truly could fight a rusted large bolt with a ton of power
Thank you for the video idea!
@project farm if you test impacts you should test the craftsman v20
This is a great idea! I'd like to see the Milwaukee 2767-20 cordless impact go head to head with the Ingersoll Rand W7152. I know a guy who is a die hard Milwaukee fanboy, and I hated that impact. I used his multiple times and it was heavy, bulky, 2 power settings only, straight on angle caused the battery to go against wheels, and the light sucked. Myself being a horse of a different color, I chose the IR W7152 because of its overall design and features. It's lighter, smaller overall length of the head nose to back, the halo light is awesome with 4 different settings, and can be used as a work light for 10 minutes in the neutral position (definitely handy under a vehicle). Also, the angle of the head helps keeps the battery end from contacting wheels when removing lug nuts, and I like the 4 different power level settings. Battery charger takes around 45 to 60 minutes to fully charge the dead 5.0ahr battery which really surprised me. The charger also has a built-in USB port for mobile device charging. It also seems to have better balance and ergonomics. IR claims 1500ft lbs reverse, vs Milwaukees 1400. I think other channels have covered this though, but I'm unsure if they were as comprehensive as PF is!
@@ENGINERESCUE86 i run the 2863-20 milwaukee impact and love it the bluetooth app lets me make 4 different torque profiles so i have 3 for wheels and one that is full power super nice to be able to do
Todd’s “PROJECT FARM” is the you tube version of the consumer’s report magazine. Unbiased, no mumbo jumbo, well presented and all the back-up data to present his findings.
Well done, awesome commitment. Thank You !!
You are welcome!
Well, at least what consumers reports claimed in their mission statement. I believe there was a lot more native advertising within their publication then they would like to admit.
PF,
Excellent work as always. In a way You're kind of like a Dad. After all, where do most guys learn about tools from?....their Dad. However, you cut out any bias and show scientific, unbiased proof of what's on the market. Not only that, your videos are straight to the point. You waste no time in your videos. Clear, concise, quick and no BS. I love your channel and have been subscribed for some time now. Thank you for all the work that you do.
Thanks and you are welcome!
We use a Milwaukee with a 2 amp hour battery on our snowmobile race team. I use it most of the time as opposed to regular ratchets. I charge it about once every two weeks during race season. A great tool.
Thanks for the feedback.
You are one of the best channels on UA-cam. Thanks for giving us reviews we can trust!
Thanks so much!
I have the Milwaukee and like it quite a bit, but of the four you tested the Pro Stormer impressed me the most. It's competitive with the Milwaukee at a fraction of the price.
Nice comparison. I've own the Milwaukee for several years and I love it. It's my most used tool in the garage.
Thanks! Thanks for sharing.