Best Ratchet (ROUND 2)? Snap On vs Milwaukee, Ryobi, Husky, Ingersoll Rand, ACDelco
Вставка
- Опубліковано 26 вер 2024
- 6 BRANDS: Snap On, Milwaukee, Ryobi, Husky, Ingersoll Rand, ACDelco. Ratchets tested for maximum torque, working speed, minimum and maximum RPM, noise, weight, tool balance, endurance under constant load, battery run time, and battery recharge time. I purchased all of the ratchets tested to ensure unbiased reviews. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Ryobi: amzn.to/3GCPKHC
Milwaukee: amzn.to/3jMVioT
Ingersoll Rand: amzn.to/3BuG2TC
ACDelco: amzn.to/3mv3jRu
Husky: amzn.to/3mtLp1j
Torque Adapter Used to Test Ratchets: amzn.to/3btR9le
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
Here’s the list of products reviewed. More details in the video description. Thank you!
Ryobi: amzn.to/3GCPKHC
Milwaukee: amzn.to/3jMVioT
Ingersoll Rand: amzn.to/3BuG2TC
ACDelco: amzn.to/3mv3jRu
Husky: amzn.to/3mtLp1j
My wife said “how can you sit there and watch a guy test drills?” I said “because it’s project farm. He’s the only guy I could watch do this” 😁👍
@Hell's favorite Salty Masshole My wife actually understands, she just won't always let me watch if she's in the middle of a show. Lol.
Thanks for watching!
Cuz hes the best
Haha my girlfriend says that too.. how can you watch 2 videos in a route of the same thing.. men that's something some women will never understand. Man I love your videos!. 😅. Before I buy tools i come to ask to Project Farm.
@@kb8978 ….hide the controller… dah
Totally random, but to the guy in the SRQ Airport with a Project Farm shirt on, thank you for letting us cut in the security line. My family of 5 made it on the plane with 1 minute prior to shutting the door.
hey no problem man
It's ok send me 5.000$
You're welcome bro
@@supers0nic77 no , sorry
Test which hand soap removes grease grime best.
I wash my hands real good then use sanitizer. I have noticed that sanitizer is great at easily removing any leftover grime that soap doesn’t take care of.
Great suggestion!
Oh this is a good one!
Dawn is the best mannnn...
Definitely ZEP
As an auto worker of 21 years, I once had ambitions of doing tool reviews on my UA-cam channel.
But there is no reality in which I can do better than this man at testing tools... 😲
The creativity and thoroughness is off the charts, as is your commitment to the scientific method. Great work!
Go for it you could be great at it just give it a shot
@@johnrodriguez853 Not when there's Project Farm! 😂 The man is a machine and a legend.
He tests and compares things I don't even need, and I'll still watch them for the content quality (and "to learn stuffs"). 👌❤
@@TheTexican05 I duno.. Torque Test Channel does a pretty amazing job @ what they do too..
This guy tests specs. A guy with your experience can test actual functionality far better. Don’t hesitate to make videos that level of experience you’d probably have good takes on what makes a tool good or bad in actual use. Something people forget with these channels is that tools can be great in tests but be frustrating to use in practice.
Hey. I have the suckiest channel reviewing knives, guns and flashlights. I suck. People watch. But it’s for fun.
Dude after years of watching your channel, I just want to say thank you. You remain unbiased and your testing is thorough. Ive bought many things based on your recommendations, and they've all stood the test so far. And you do it in a way that's not boring and mind numbing. You sir, are the real deal.
Thanks so much!
Yes he is far better than consumer reports the test are more real world verses lab testing
I’ve used a Milwaukee for 2 years now and I watched my coworkers buy snap on ratchets and give them back every 6 months for a repair. More expensive doesn’t always mean more better. Glad you finally gave me the numbers!
Thanks for sharing.
You are 100 pct correct.
I've seen snap on sockets Crack, my 600 $ digital torque wrench the end cap stuck out even pliers helped.
I'm going to try Hilti impact wrench to drive d lag screws to build decks.
My Dewalt works just too slow.
I like milwaukee though feel hilti is the better choice..
Just to put this out there I prefer the snap on electric ratchet over anything else. The snap on guy didn’t even tell me that there’s a grease fitting in the head of the ratchet where you select the rotation direction. If that is not greased regularly it will eat itself apart. Greased mine since day 1, had it about a year and have had absolutely zero complaints. I use it almost daily and have dropped it, kicked it, threw it, etc and it’s never skipped a beat. Couldn’t be happier.
@@jeffalan6339 Sockets cracking if misused is not unique to any particular tool company. All snap on hand tools have a lifetime warranty. Walk on the truck and exchange it or if they don't have it on hand they will order it for you. It's that easy no paperwork to fill out or anything like that. I find it problematic people will try to shoehorn the wrong tool into a job instead of stepping up to an appropriate tool. That's not to say that it might not be able to do what you are asking of it just that it's not technically the right thing to do. I personally have never managed to break a snap on socket ever and I've worked on big stuff like Boeing 747's to include taking off some big things that take 2 1/2" nuts.
@@FloorItDuh I have yet to Crack a master mechanic or craftsman. When I worked in a dealership the tech next to me snapped his snap on socket loosing lug nuts I let him use my master mechanic it held up.
I use the two to prevent my tools walking away. As did my snap on lugnut set.
I love how he chuckles and says “We’re gonna test that”. Cracks me up
Thanks for watching!
@@ProjectFarm Does project farm really write his own replies? WE'RE GONNA TEST THAT!
bricks me up
@@meme5887 ig not
Snap-On does have a battery level indicator, it's the small light on the side of the handle that changes from green to red as the battery dies. This is also their discontinued brushed model, the new model does have a brushless motor and 65 ft lb torque output
Thanks for the constructive feedback.
Also only looked like the 1/4 inch, I noticed the 3/8 one I have out does my 1/4 snappy all day
I bought the new brushless snap-on and now the ratchet head slips 4 months after I bought it. And 3 LED's went out also....
As a professional mechanic the body size of the tool is very important, doesn't matter if the head is tiny but the body is huge so you can't squeeze it in anywhere. I prefer a tool with a slim body size or an extended reach neck to allow good access. I have used the ACDelco brushed and brushless version for several years, and I chose it because it has a body size similar to an air ratchet. My only complaints long term have been battery quality (I have had a couple go bad) and the slower RPM compared to other tools.
Agreed, I got a set of extended length ratcheting box wrenches just because.
That's not what she said
Very true. Especially removing dashes and against the firewall. Friends ask me why my matco 1/4 and 3/8 swivel sets are my most used tools . Snap on is being very bad at warranting swivel head gear wrenches so I will be trying matcos out . Hope they aren't a waste of money
@UCBzSB6BuIF7CNkNgjnA6ItA AKA (
johnfran) Is the "Book of truth" some fan fiction you are working on ?They say not to engage with trolls and for good reason.
But the burning question I have for you my bridge dwelling idy bidy buddy "IS what does all that got to do with ratchets?
and wouldn't you have more fun on Alex Jones's channel?
I've used the Milwaukee for the last 5 years purely for the battery quality. I have hands that can palm bowling balls. Access in tight spaces has always been a problem for me regardless of the tool.
If I need a slimmer tool I find a different way to get at the bolt.
I’ve noticed that Ryobi has really been stepping up their tools
Thanks for sharing.
And that’s their smallest battery.. I’d love to see how much of a difference using the larger 4Ahr battery would make! Honestly it’s hard to justify the top three big brands for house use when Ryobi is always on their tails
@@Warr1895 Yea that would be wild
I have the Ryobi at home and use the snap on at work and have found that I actually prefer the Ryobi
I love the Ryobi ecosystem haha only downside is that they have all my money 😂 I’m trying to buy all of the different tools
I didn't get the notification for this today and I was super sad! Glad I checked, now I can get my weekly fix in. Incredible work as always! I hope you're well!
I didn’t get a notification either.
For real. I check in time to time in case UA-cam is trippin
Same here!
I’ve noticed UA-cam also unsubscribing me from popular channels I frequent
Ain't he the best. Love this channel!
No nonsense, clean smooth editing and very thorough testing. Love your videos.
Amazing how many people have viewed your content seconds after it came out. Congratulations on your success. You earned it
Thank you so much!
I love watching anything by Snap On lose miserably.
😂 It pisses me off how much they overcharge for their mediocre power tools. Apparently someone out there doesn’t know any better and is paying that much because they have the Snap-On logo stamped onto some generic, shitty power tools. It seems Snap-On haven’t gotten the memo that the power tool and hand tool markets are completely different.
@@samuel5916 This. I work in this industry. Snap-on hand tools last a lifetime. Snap-on power tools last a couple years, at best. This is with heavy, daily use.
@@danervin2530 Yeah they are two different markets and companies shouldn’t try to do both unless they’re actually gonna put in the work to make something worth buying. Kinda the same problem with Power Tool companies that try to make hand tools. I love my Milwaukee power tools but their hand tools are mostly trash. 🤣
@Doug Deshawn Pretty sure their power tools are made in Asia since they all come out of the same factories. Keeping jobs in America is cool but it’s not a good enough reason to overpay for a shitty product.
@Doug Deshawn assembled is vastly different than manufactured. Wait on that 14.4… First mine was the trigger switch, shortly after was the LED, then the motor clutch, then the motor itself, then one of the two batteries stopped charging. I probably baby’d it for 5 years or so, but each time it was out being warrantied for at least a month. Don’t get me wrong they’re not bad tools. I just don’t think the price tag is justified in that range of their tools. I use Makita now because it’s cheaper, does the same job, and when it inevitably explodes I can buy another down the street on a Sunday at 9pm. On my tiny Makita I actually replaced the anvil before anything actually broke, because it wore out from so much use lol.
I love the test rigs and jigs you make for these comparisons. The time, materials and ingenuity to do such complete and exhaustive testing for every aspect of a product type is amazing! Thanks for everything you do for us!
Thank you ! I appreciate that!
I got the Ryobi for Christmas and I love that thing. I already had other Ryobi tools so I have plenty of batteries for it and it's really performed beyond my expectations. The only drawback at times has been the battery size.
Great feedback. Thank you!
i feel like if they made the straight battery type like milwwaukee than ryobi would be the best yet. i love their brand the battery clockyness hurts just a tad.
@@ChickenJesus338 Each brand serves a purpose. I don't think the powers at be would allow ryobi to overtake milwaukee in a professional setting. After all they're owned by the same parent company. In my opinion ryobi is one of the best brands for the average weekend use DIY home owner. Ryobi has become a lifestyle brand. Their stuff isn't going to win any awards but it's capable and the product lineup with those dang batteries is hard to beat for the price point.
I have a bunch of Ryobi stuff but I'm going to get a Milwaukee exactly because of the clunky battery issue. The whole reason I'm going to need an electric ratchet is probably because I have a nut or bolt that I can get a ratchet on but don't have room to turn much. The big Ryobi battery is going to make it hard to fit into tight places.
I love my Ryobi, it does it's job allways excellent. The rotatable head is perfect and compensates the bulky battery drawback. Also, because Ryobi has promised to NOT change batteryshape ( like some other brands do everyfew years), I'll stick by ut and bought allmost every imaginable tool they have.
Price and practical function is a great benefit; more Tools for your money! (Alltough overhere in Holland, Europe, they cost allmost as much as TopPremium brands. Milwaukee is ridiculous expensive overhere; unobtanium for most people overhere; stupid marketing...
I found the Ryobi ratchet at HD the other week for $40 with battery and charger. I wasn't expecting much but it really did well taking off a skid plate for an oil change. For a cheap tool it works great🤙
I got the same deal and totally agree’
Thanks for sharing.
It's been replaced by a longer, slimmer, more powerful model, rated at 55 ft. lbs of torque. The new one is also very expensive, even w/o battery or charger.
@@Anonymous-it5jw yeah its the brushless one. which doesnt matter to me, the weekend garage hacker. cheap brushed works fine for me.
This however is one really ANNOYING thing that Ryobi does, release a new version thats a LOT MORE expensive for little to no gain of function (for me anyway)
Earlier this year I got one in a combo with their battery value pack. Two 4.0Ah batteries, a charger, and the ratchet for 80. They are so good for the price and good discounts occasionally
Test idea: Different grease and oil absorbant materials see if the more expensive products are actually better than kitty litter
Thank you for the video idea!
The DE (diatomaceous earth) stuff is excellent but way too pricey! And for some stuff, plain old dry sawdust (free!) actually works well enough! 👍🏼😎✌🏼
We've been using peat moss for a few years and I've gotta say it's the best thing we've found. Soaks up everything.
I use the Montmorillonite Clay that most auto parts stores use.
Excellent idea!
As a DIY shade tree on a tight budget I bought the Husky based on this video. It's more than enough to work on engine stuff and the compactness helps make it a beast at doing spark plugs. Thanks for the video, Todd!
You are welcome! Thanks for the feedback.
If I'm buying an item you've reviewed, I will go with your recommendation 100% of the time. To call you a one man Consumer Report would be an insult, because you show and discuss everything you do in such a transparent way and on video. God bless you and please keep up the great work!
On the idea front, please do a comparison of common oils and gun oil, I would really like to see if they are selling snake oil or if they are worth the added price. If you would, please compare them to a top tier synthetic motor oil, 3 in 1 or some other generic household oil, WD40, and whatever else is commonly found. That would be so much appreciated!
truly depends on what you're using them for, some of these dont really perform well in a engine bay
You sir are for the people wish all the politicians had this type of integrity. Doesn’t matter the brand name, only the facts. Amazing work as always !!!!!!
You should do a battle of the oil filters. There are so many choices and prices on oil filters. It would be nice to see if you really get what you pay for or are the cheap ones ok to use.
Thanks for the suggestion.
Mobil 1 Extended Performance
Baldwin Vs. Wix
General good rule is nothing that says China/Mexico on it is the FIRST place to start.
When I still had my old truck I ran nothing but the white K & N extended life oil filters and Royal Purple. They aren't the cheapest but they also aren't the most expensive. I probably spent $50 - $60 per oil change and it lasted for a while. It also purred like a tiger cub when at idle. :)
I continue to be amazed by how well your tests are designed. It really shows you understand how to use tools. Thumbs up from Norway!
Thanks!
ditto from Wales@@ProjectFarm
As a home owner and DYI guy, I buy Ryobi mainly for the price point AND the batteries fit ALL the 18v tools both new and old. I'm done with having multiple battery chargers and high replacement battery costs of other brands out weight keeping the tools. Ryobi products perform so they are a no brainer for me.
I’m glad you incorporated snap on into this line up! This has been a long running debate for me being a heavy equipment mechanic! I understand they’re expensive so you probably can’t always do snap on in the line up, but any time you can I love to see it!
Thanks!
I always find myself rooting for Ryobi when he has them, even though I know they are not a brand aimed at professionals (which is one reason why I use the Ryobi brand). Nice to see one on the podium today.
Ryobi and Milwaukee is own by same company, company specializes in small electrical motors. I use both tools.
Thanks for the feedback.
Haha, same here. Weekend warrior tools FTW.
I own both the ryobi and husky, and used both as a full time mechanic. The size and performance of the husky has made it my go to. Im amazed at its battery life typically 2-3 days where as the snap on diehards wont make it through a full day. Also snapon battery warranty is only 1 year and costs $100 for their 14.4 and you have to wait for the snapon guy to come around once a week vs the husky or ryobi both carry a 3 year warranty honored at any home depot.
Thanks for the feedback.
thats why you're a small shop mechanic and not a tech, if not the case prolly only do oil changes, the husky and ryobi is impossible to use in some engine bays because of how bulky they are
Thing that sucks about the husky is you can’t swap the battery. When that goes its useless
@@Vgk36 when that goes. Get a new one covered by the warranty that runs 3x longer than snap-on
i'm also a full time mechanic and bought the new Milwakee 450rpm 3/8 ratchet. It has 0 breakaway torque and no leverage for most jobs i end up using my old air ratchet instead. The only thing i use the Milwaukee for is caliper bolts.
we need the new impact right angle tools compared to the ratchets which is better to have?
I'm very interested. I'll pin this comment. Hoping others will help make a list of specific brands/models to test. Thanks again!
@@ProjectFarm there is only a few brands, 2 of which were tested on the TTC.
@@ProjectFarm i only know of milwaukee and kobalt.
As someone else said, Milwaukee and Kobalt for sure. It would be a sin not to include those. I’d love to see not only their power, but also how tight of a spot they fit in.
RIDGID makes a right angle tool as well as DeWalt
Thank you for this. I’m such a Ryobi fan it’s nice to see it doing well against some really strong brands
You are welcome!
@@ProjectFarm Ryobi does have a battery level indicator. It’s on the battery on most batteries
I bought the Husky in the fall of 2019, at the Homeless Despot. It was $45, back then. Since then, I have beat the ever lovin bejeezus out of this tool. It has plenty of torque for 99% of anything one might need to do around the house. I have used it for projects, lag bolts to hang a TV, caliper bolts on multiple brake jobs, and garage door repair.
It's never stalled, or done anything quirky. Let alone started smoking. SnapOn should market theirs to the "bug out/survivalist" crowd. After building a shelter, it can start a fire for ya! 😂
Bottom line, if this Husky were to crap the bed tomorrow, it would still be a bargain at $60. I'd definitely buy another one. The Ryobi looks like a solid buy, as well.
As always, thanks again Project Farm! You rock.
You are welcome! Thanks for sharing.
Truly a non-biased scientific approach to testing these brands!
I know we all cheer individually for our own brands but PF just lays out the facts. Gotta respect that. This is honestly the Best "consumer reports" reporting available and Far more informative than the typical "feels good in the hand" type tool review.
Keep up the Great work Sir, we appreciate all the time, money and efforts involved in creating this content 😁👍🇺🇸🇺🇸
Thanks and you are welcome!
I have the Milwaukee fuel, and i find that its the perfect thing for brake jobs when an impact won't fit. Disclaimer, PERSONALLY, i think the long reach is the best in all aspects, but i don't have one. i normally break it free with a normal solid ratchet (a few hand taps) and then zing it out with that. Works suprisingly good with rusted crusted bolts nuts ect. Even if they come out hard, the thing normally pulls them out and its FAR better than the struggle of tough bolts with a ratchet. I think you almost need to pick a ratchet based on how you're gonna use it. Milwaukee has the new high speed (hopefully long reach high speeds at some point) which if you're just doing smaller bolts nuts ect and wanna get them out fast, thats the go to. Love the videos and tests always amazing.
I'm all about the 3/8" brushed Milwaukee. The head is way way smaller than the fuel, and is like half the cost. Even that will snap small bolts if you aren't paying attention.
These videos are so fun. Let's do round 3! Kimo, Dewalt, Craftsman, Kobalt, Hart, Mac tools, Shieldpro to name a few. Maybe at the end of the test, compare the first two best value against the winner of round 3?
Keep up the wonderful work you do for all of us. I look forward to Sunday every week! Thank you!
I would like to see how the kobalt would do
DeWalt don’t make a cordless ratchet.
@@mrtroll3851 they do now
@@sinisterx9029 i been wanting him to do more kobalt power tools testing, i think the new kobalt xtr models are going to be beast! lets keep our fingers crossed.
@@sinisterx9029 I have a Kobalt cordless ratchet as well and would love to know if my money was well placed!
Surprised Craftsman wasn’t thrown in the mix since it has proved to be phenomenal, especially for the price, although I can’t remember if it was included in the first round. On the other hand, I freaking love Snap-on is compared because then you really get to see whether it’s worth all the money.
Added to my list for the next round. I'm hoping viewers will suggest more brands to test. Thank you
@@ProjectFarm I would love to see how the Makita compares. :-)
Can we also check out the kobalt 24v?
@Project Farm
And did the snap-on please you my dear after Ryobi took it around the corner and kicked the 💩 out of it 🤕
When I started working on my truck I got a makita 3/8 impact and a ryobi 3/8 ratchet because of how much I liked ryobi’s line of lawn care tools. It has done fantastically for everything I’ve asked from it, everything from removing battery terminals to using it as a wrench to attaching a bull bar to my truck, It is a really great tool for your average DIY’er with a bit of mechanical knowledge.
Thanks for the feedback.
Looking at your earliest videos and then now your confidence has blown up and your enjoyment level seems alot higher as well. Happy to see your channel explode so much and the tests you do are invaluable
Thanks so much!
Todd, as Veterans Day approaches I just want to say thank you for your service to our great country.....you're certainly providing another great service now to your viewers!! God Bless.
Thanks so much!
Wow, I had no idea my favorite UA-cam tool (amongst other things) reviewer was a veteran. Thank you so much for your service! Marine Corps? Army? Did you serve during the Gulf War?
Ingersol Rand is going to be having a really awkward staff meeting this week. Snap On will be sending out a sales flyer with plenty of eye Candy to distract.
Every week is like that at IR. In every test they offer the least value for your money.
i thought honestly that IR is superb quality but looks to be quite opposite, at least pneumatic gun was good i used years ago
@@kiiiisu The IR was built for speed not torque, it performed the function it was made for pretty well. Cordless rachets in general are made to run bolts in and out not break them lose or tighten them. i would still never buy it though due to the weird battery/handle design
@@Flip98Q yee ure right probably, didnt think it like that
I'm pretty heavily invested in Ryobi tools and batteries and I LOVE all of them, Ryobi makes great stuff especially for the price. This test has really soured me on brands like Snap On, you just don't always get what you pay for.
Sir the impact you have had on the trade and DIY community is incredible. I'm going to college for automotive mechanics and the gentleman who watches over the shop and keeps tool inventory can often be caught in his office watching your videos, and I will ask him if he's seen the latest videos haha
Thanks for sharing!
@@ProjectFarm You really are a genuine legend for all of this work. I love and appreciate your work and effort guy. Big time!
I totally agree with you Korbin. I don't purchase anything anymore until I see if Mr. Project Farm has reviewed it or covered it.
Alex, is that you? I thought you were a prosecutor?
Same here, thanks to project farm we've got the right tools for the job, although in some instances it's a matter of using the same batteries, so we use alot of Milwaukee tools at our scrap yard because they usually have the most power.
Finally a comparison a lot of people are going to enjoy. I have that Milwaukee and also the newer high speed version which I like the most as I'd rather give up a little power for speed. I also like the design of the Milwaukee vs Ryobi and IR as the battery gets in the way with those very often.
Thanks so much for adding snap on in the mix. Would love to see more of the snap on, mac, matco, added to the tests including the hand tool tests. Many thanks for all the time and effort you invest into each test. KEEP IT UP!!!
Thanks, will do!
PF, You made one of the best "We'll test that!" videos on the planet. It looks like you have fun every time. You had me when the SNAP-On starting smoking in the free run time test.... and needed some fans to keep it going. EPIC!!! Thanks very much!
Thanks so much!
I scored that husky with sockets a few years ago on sale for $49. Im surprised how well it did against the more expensive brands. Its been great to me and still going strong
Same, as a home gamer it has definitely been a handy tool. I actually bought 2 of them.
Ryobi never ceases to amaze me at the quality you get for the price. On a side note, it also never ceases to amaze me how over-priced Snap-on is for what you get. Great video as usual!
In the field, snap on is the best cordless ratchet
@@FusionBoost2.0 Even though it was just proven that it isn't anywhere near the best.
@@FusionBoost2.0 Uh oh, subjectivist kool-aid drinker is here to tell us something contrary to data
@@FusionBoost2.0 Lol no it's not, the crooks over at snap-on have you brainwashed good. You don't have to simp for them just because you have another 143 weeks of payments on your ratchet.
@@rynelson85 You work in a shop? Probably not
OH MY GOD, you have answered a burning question in had to move away from Ryobi and what to use. I'm happily surprised my Ryobi was so good. Having the batteries , I can get the tool alone on sale.
You give just the facts and I trust your methods.
Thank you!
You are welcome! Glad I could help!
Snap-on does have a battery life indicator. The LED light in the handle goes from green, to yellow, to red.
Nice to see you around here
I thought the same thing, I have the Snap on and love it.. The battery indicator sucks tho.. It is there tho...
Love your videos man, I literally just made the same comment 😂
Plus snap on makes a brushless version.
And he’s using the old brush ratchet, the new ones are brushless
I'm retired and don't have a shop anymore. I've been debating on which to buy, I'm leaning to the Snapon 1/4" extended. Get it on sale and I don't think anyone can beat it for speed, torque or quality.
I find myself watching all these power tool comparisons silently rooting for Milwaukee, and they rarely if ever disappoint.
Thanks for sharing!
Don't silently root for Milwaukee, I openly do. Lol
Yeah I think across the entire range of power tools, they overall are the best platform right now. Individual tools might win or lose but the entire line-up has few if any weaknesses.
@@samuel5916 Agreed.
LOL, I hope they win too every time. I have plenty invested into them so it makes me feel good about spending the money. I have 3 electric ratchets from Milwaukee and I love them!!!
Another great video! I would like to see more Harbor Freight Tools in your test along with Menards brand tools as they seem to be becoming more popular. Thanks for the time you put into these videos!
Thanks! Thanks for the suggestion.
Nice test! But there is one thing left out, measuring the largest point of the ratchet. That’s one of the most important things to consider as getting into tight spots is common these days. Doesn’t matter how a ratchet performs if you can’t use it. But this was great non-the-less!
Thanks! Thanks for the feedback.
Very nice. I really like how you test as many different aspects of the tools as possible. Much more informative than the blurb on the tool's boxes.
Thanks!
Full time mechanic here, I have 2 Milwaukee ratchets 3/8 and a 1/4, as well as everything else they make. The tools hold up really well long term, as do the batteries (all mine are like 5 years old, daily use). This is why I think they are the perfect tool. The price is good, and the longevity is great, as well as the warranty. Snap-on fan boys are going to buy Snap-on tools even if they are over priced and don't perform any better. A lot of mechanics also seem to think they'll be considered a better mechanic if they own Snap-on tools. They must be making lots of money if they have really expensive tools right??? Buy what works for you, and the end of the day, it's all about you earning a living, not handing over the money you earned to the Snap-on guy.
Not to mention most of snap on power tools have brushed motors, meaning their performance will suffer throughout use unlike brushless motors
I'm a firm believer in buying whatever tool will get the job done for the least cost. One of my best purchases was a hammer drill with no name for $10. I had a need to drill a hole in a concrete slab and I didn't have a hammer drill. I found one at one of the local bargain figured $10 to drill one hole I'm in! That was over twenty years ago and the drill still works. For the record it's corded variety. 😉
We use milwaukee exclusively for industrial use. We put them thru hell and they keep going, the high torque impact gun is one of the best purchases we've made. The nice thing about milwaukee is all their tools are good, there may be a few brands that edge out certain milwaukee tools slightly but it's worth sticking with milwaukee to not have 4 different chargers and batteries
While they are overpriced my biggest gripe with snap-off is their refusal to honor a warranty if the truck/vendor you bought it from no longer exists. Ya you bought a tool/chest/item new from an authorized vendor, but because that vendor no longer exists Snapon won't honor the warranty? I'm sorry what?
I can take a broken Kobalt tool I bought from a pawn shop and return it to lowes for a new one without a receipt... Companies that don't honor warranties are not worth putting money towards or respecting.
@@FakeJeep I've never heard of that, but I don't buy overpriced snap on tools. Pretty scummy when you spend that kind of money on their product.
Hey Project Farm, great video as always, but with a few points to mention:
• The Snap-on ratchet does have a battery life indicator: the LED by the Snap-on logo lights green when the battery level is, IIRC, between 50-100%, yellow between 25-49%, and red below 25%.
• For the next time you compare ratchets, include Milwaukee's high speed M12 FUEL ratchet, P/N 2567-22, as well as Snap-on's high-torque "Brute" 3/8 ratchet, P/N CTR762K2.
Thanks again for all your contribution to unbiased product testing, have a great Sunday 😁
Edit: Also include the Snap-on brushless ratchet, P/N CTR861K2
Was just going to say this.
The brute sucks… the new snap on brushless is 75rpm faster, better light and 60lb ft torque.
Snap on also now Carry’s a brushless 3/8 Ratchet. P/N CTR861
@@aaronkennedy6634 Really? It's about damn time.
I just swapped out for the high speed Milwaukee and although the torque is slightly less it is much easier and faster to use. Being able to use it as a regular wrench until you can brake the nuts lose even felt strong and sturdy and then having the extra speed to spin the nut or bolt out the rest of the way was a huge time saver. Same when tightening down and getting nuts fastened quick, then pull out the torque wrench if needed to finish the job. Such a nice tool!
Another great review. I've been pondering the need for an electric rachet and I don't mind spending big money on an item if it proves its worth. I was very impressed with Ryobi and I could buy 5 of them and strategically put them around the house, boat, shop and farm and still have money left for a supper in lieu of one snap-on.
Well done fine sir.
Thanks so much! Thanks for sharing.
Glad to hear the Milwaukee, as usual, acquitted itself well, since I have invested in that platform's batteries.
Thanks for the feedback.
I figured that Milwaukee was gonna make a good showing. Especially when seeing the others and the Milwaukee comes out lookin like a tank by comparison.
It’s the tool that made me join the platform
I feel the Ingersoll Rand brand are usually the most expensive tools, but ends up at the bottom of every test against the cheaper ones fairly consistently.
I've noticed the same thing. Hopefully no one at Ingersol Rand puts a hit on this guy for his work!
For air compressors I really like Ingersoll Rand. They used to build the Craftsman compressors back in the 60s. My dad bought one and I still have it in my shed and yes it still works.
@@JohnRodriguesPhotographer i/R quality is not the same anymore. I bought a 60 gallon 5 hp compressor in 2016, and the pump crapped out in 2019, luckily a few months before the 3 year warranty expired. They couldn't fix the pump, so they refunded my money and let me keep the thing. I put a Harbor freight pump on it, and has lasted over 2 years so far.
@@JohnRodriguesPhotographer Their 2 stage compressors are hard to beat. We have one at work that is older than I am and still works everyday.
@@Ron-ds2ob I was thinking Harbor Freight time!
The Rioby did an amazing job for the price. *_Very Impressive!_*
Thanks for the feedback.
First of all, your channel is AWESOME!!! I'm always watching your videos. And second, I am VERY impressed by Ryobi. Never expected it to do THAT well. WOW!!!
Thanks!
This was a fantastic test! I never would have guessed that the least expensive Ratchet's would come out on top and suit my needs best. I really appreciate you for posting your findings.✌
Yeah tbh that Ryobi ain't looking so bad lol
Love how the two least expensive models consistently turned in impressive performances.
Thanks for the feedback.
The snap on has the indicator on the side at the grip, that’s the green led that lights briefly while operating the ratchet. It goes yellow or red as it dies.
Surprised he didn't notice that
Thanks for the constructive feedback.
Hard to spot possibly due to the smoke issuing from it.
@@ProjectFarm did you grease the snap-on ratchet before the test? And do the other brands have that? I don't think you mentioned that in the video? Maybe I missed it. Awesome video! 👌
Loved how thorough, technical and informative these tests/video clips were!!! I suspected the results would be such (based on my experience working with some of the brands) but you definitely confirmed..... Increases my confidence in purchasing 'em tools..... Thank You!!!!!!!
Thanks!
I've been looking for a loud, expensive personal heater and it looks like I've found it in the Snap-On!
The crap-on does have a battery level indicator, a single led that changes colour. They also have a brushless version that has slightly better performance but probably still wouldn’t have been at the top.
The cost of this one is bad enough, the brushless must be hideous. Plus triple the cost once you take their interest rates into account!
Now I didn't find the brushless version. But I did find that $ 237 is charged for 2 batteries + charger, which is 4x the retail price of the same but better components. These Snap-On batteries contain 4x 18650 2.5Ah cells each. My guess is Samsung, if so, they provide 25A max. Which means 360 Watts available. 8x top end Sony, 2.6Ah, 35A make 504 Watts available at retail $ 40. Good charging electronics and all plastic, $ 20. Makes $ 60. Retail.
Crapped-On by the Strap-On man
I've got the snap on one but it does have a grease nipple on the head not mentioned as it does get hot. I was going to buy the milwaukee previously but its to bulky and slower but then milwaukee came out with a brushless version recently but its less powerful than the brushed lol.
Snap on have came out with a brushless 3/8 so waiting for that to come to the UK.
Idk how you guy use your snap-on electric ratchet, but i hold that bitch to the wood and slam it on bolts or nuts and it holds up! i wanna see other ones hold up to real shop abuse i bet they dont last
Another great side by side comparison. I use the ryobi tool line and the ratchet has not disappointed me. The Snap-on is a let down for the money it cost.
Thanks! Thanks for the feedback.
I own 4 14.4v Snap On cordless ratchets: 1/4” regular and longneck, 3/8” “Brute” ratchet and 3/8” long neck. In a professional shop environment, Snap On and Milwaukee have proven their durability for daily heavy use. My 1/4” ratchet went over 5 years before I sent it in for service and I use that one almost all day, every day. A guy next to me bought an AC Delco ratchet from Amazon. That ratchet didn’t even last 6 months before it was junk. He now owns Snap-on ratchets.
Ryobi is also the only 18 volt platform tested. Not surprised it out performs 12 volt tools.
I’m really impressed with the Ryobi. For the money, it did a great job. Definitely the best bang for the buck imo. I’m more of a DeWalt guy, but these Ryobis are getting better and gaining more appreciation from me. I’d be super pissed if I bought the Snap-On and then say this video. Another great video and review 👍
This model is on clearance for $45 right now including battery.
I have been using Ryobi since about 2001. I really like the product. One of the big reasons I kept with Ryobi is there a commitment to the 18 volt battery platform. I have spent a lot of money on Ryobi tools over the years and the fact that I've been upgrading from the old battery technology to the lithium-ion technology without having to buy new tools has saved me a lot of money. At this point I have never had to throw out a Ryobi tool because there was a problem with it or it broke. I still have my original purchases and they all work. The only thing I had to do was to buy a different charger for the lithium-ion batteries.
@@Pmaan1 So you can buy 10 of these or 1 Snap-on.
Never seen a Dewalt ratchet
@@Pmaan1 Where?
So the conclusion is Snap On is literally hot trash. While I do have other Snap On tools that are great, I'd never recommend the majority of their tools at their price points. I'm quite impressed with the Ryobi in your test. For its price, it's definitely impressive.
As usual, great work with this video. Thanks for everything you do!
You're an idiot lmao. It will outlast all these ratchets lmao and it comes with 2 batteries
@@subradiant_music Spending 600 on a wratchet you sure you're not the idiot?
@@subradiant_music found the Snap On fanboy 🤣
For me I prefer to use the snap on electric ratchets over the Milwaukee ones. But for the impacts drivers, impacts wrenches, and all the other power tools, Milwaukee all the way👌
I love Snap On tools and own lots. I have most of the 14.4 cordless tools, the 1/4” ratchet is not bad, the 3/8” is crap. The price is a little deceiving, only a fool pays list price. I got my 3/8” ratchet (tool only) for $120.00 right off the truck. The only reason I like the snap on cordless tools is the toggle switch on the drivers and impacts.
I've got loads of ryobi gear and can't fault it. People always seem to underrate it or they tell me it will fall to bits. I once dropped their cordless circular saw off a second storey roof onto stone flags and it didn't even crack the case.
I have a Ryobi screw gun that's at least 15 years old.
Cheap isn't always "cheap" a company should always try to maintain or improve quality while reducing s costs, sounds like Ryobi has done that.
I have a lot of Ryobi tools, as a non-pro, and I don't think any have fallen apart. There is the normal tool sobbery, although truth be told I'd love to upgrade to a full Makita or MW set if I won the lottery. Wouldn't make a difference to what I end up doing with them though, just brand name bragging rights mostly.
Thanks for the feedback.
My Ryboi kit gets abused like no other, the only downside I've had so far is that the drill's chucks are a bit loose. That could be fixed in production by putting a bearing in the end.
But it's a cheap tool that does it's job just fine, so I can't fault it too much. The one thing a lot of people don't realize about Ryobi tools, if you've got their old ni/cad Oneplus system, the new batteries will work with them.
So if you see an old Ryobi in good shape at a garage sale or thrift shop, pick it up.
After watching this video about 2 months ago, I purchased the Ryobi and it is wonderful. I really enjoy your videos and have learned a lot from them. Keep up the great work.
Thanks, will do! Thanks for sharing.
I love this video! Very very thorough, completely unbiased, thank you for the video. I started with the husky now I have the milwaukee. I personally like the milwaukee better but I didn't realize there were so many options out there
Thanks and you are welcome! Thanks for sharing.
Small nitpick but I feel like it should have been mentioned during the battery life test as it contributed significantly to the Milwaukee's cost. It came with 2 batteries. If you double that run time by swapping the two included batteries and then factor in the faster recharge time, that makes up significantly for the shorter runtime.
In your thought process, however, if you double the run time of others with an additional battery, it would still fall short.
@@thesarge118 only the Milwaukee and the SnapOn featured in this came with two batteries. If you didn't buy that bundle then the cost/performance ratio would not be so extreme. The point is to compare the contents of the bundle on nearly even footing. Since Milwaukee seem to know they have a shorter battery life they include a spare. It's all a trade off but I figured it should be highlighted that the capacity of the unit is split into two batteries but you do get them for what you pay.
I agree to a point but then you would have to calculate the weight of the extra battery in the test as well, but you wouldn't because it is a separate battery this makes it not a part of the tool when in use
@@joelrodgers6891 you just gave the reason not to do it in your post though. If you design around ballance, splitting the capacity for ergonomic reasons is a good design practice. Weighing it or measuring runtime - they have different metrics of practicality. For a measurement of tool runtime as a comparison of "hours of work out of the tool" not utilizing half the batteries you paid for isn't sensible.
My whole point in mentioning it is that for me, personally, seeing the fact with this bundle I would get two batteries and could recharge one and use the tool still, with the spare being almost ready to swap back as soon as it ran flat. That is a good thing. PF often makes those kinds of comments about unique tools that approach the problem slightly differently. So I thought it deserved a small mention.
@@thequickestfox6106 like i said i agree and the main problem with testing two batteries vs 1 is the fact that they are not the same battery this means that it is not the same tool i.e. if i have two identical wrenches and i use one and it breaks and then use the other I'm not using the broken one it is a deferent tool
What I find interesting about this series is that generally they are substantially different from item to item as in one tool maker typically isn't the best or worst in terms of cost or effectiveness
Thanks for the feedback.
Love the video as always! Just so you know, with snap on power tools the little green/orange/red light on the side is the power indicator
Thanks!
Great test! I was thinking of getting one and for overall factors and price I'm probably going w Ryobi. Thanks for your time
You mentioned previously that you really liked the Makita. Just curious why it was excluded? Keep up the great work!!
Sorry about that. I should have included it this time.
They really are hard to beat! 👍🏼😎✌🏼
I love how you edit each video down to just the facts necessary to evaluate each tool. Thank you for evaluating each tool, oil, sharpener, etc in the same consistent approach. It is the reason why I send you money each month via the Patreon thing.
You are welcome! Thanks for your Patreon support!
Hey @ProjectFarm! Thanks for your great reviews!
I'd be interested in seeing a comparison between different types of vehicle tow/recovery straps. Amazon has tons of them from $15 up to $100+, but it's hard to gauge which one is a good value, or if the cheap ones will be strong enough for a good sized truck.
You are welcome! Thanks for the suggestion.
@@ProjectFarm pervert
I second this
As a part time, do it yourself backyard mechanic, it looks to me like the Ryobi would be perfect for any non-professional.
As a "learn to fix stuff when it breaks" guy, Ryobi is half my power tools (the other half is piecemeal and mostly HART brand, ugh)
That’s really the market Ryobi tools are aimed at and in most cases they get the job done. But for certain tools it’s well worth it to get a nicer one that has more features and controls. After I got a Milwaukee FUEL impact driver I can’t go back to my old Ryobi. Having four different power settings to choose from makes it so much more versatile and easy to use for different tasks.
Ryobi is most of my tools. I think longevity is where Ryobi would lose but for the price/ability scale it's good. I don't need my tools every day so I don't need contractor standards, but I don't want underpowered
Ryobi tools fit my needs, and have for years.
@@lithuets That’s me with the AC Delco I bought. I don’t wrench all the time, but when I have it’s been a fine ratchet.
You know, You're the only UA-camr (and I have a long list across many accounts, like many other users I suppose) that when I press play on one of your videos, I instantly press like. I know that it isn't fully objective regards a fair rating of a video, but keeping that in mind- I also always know, that Your content will deliver and even more! It is like when in real life you just keep buying from one provider no matter what, just because they will always deliver the best results in long term.
Also added bonus from you is that you keep replying even on old videos.
Content creators like You are the real UA-cam gold, no matter what is the subscribers count.
Thanks so much!
Yeah, what he said.
I have started coming to this channel to watch comparison videos, Project Farm goes into great detail with all the testing and tests things I wouldn't even think of. Great channel!
Thanks!
*DeWalt breathing heavy *
Cuz it's tired? 😭😭
some of these stubby impact guns are almost getting as small as right angle impacts these days, but the right angle impacts still do have their place. do not rely on a right angle impact for every day use though, just like a stubby, the parts are much smaller and wear out surprisingly quick with every day use, so save them for when you really need them.
I've got both stubby since they came out, in the dirt everyday with them in construction field service. No problems yet
These are ratchets, not impacts.
Also the biggest benefit of a ratchet over impact wrench is manual tightening and removal, not to mention accessibility in an engine bay.
@@matthewb2060 these aren’t impact ratchets… impacts have a hammer that “impacts” to make a bolt loose
Thanks for the feedback.
Dang, I have some Ryobi battery-powered drills and have thought that having one of these type of ratchets would be so handy. Looks like the Ryobi is a good choice, and relatively inexpensive. Plus my batteries will work for it! Thank you, as always, for your highly useful content!
You are welcome!
Ryobi wont fit in tight areas with a huge battery like that. My milwaukee non fuel 3/8 is awesome in tight areas of planes.
@@kilroy4843 Agreed. I have the Ryobi. It works great but in tight areas it sucks so I can't use it as much as I'd like to.
@@kilroy4843 My reaction also. Yes it's nice to have a one-size battery-fits-everything, but one of the reasons for using a electric ratchet is tight spaces--situations where you can't get enough space for an air hose--and manual wrenches don't have enough movement to do much good. If I've got the room, I'll switch to an impact wrench or a manual wrench, but for some of the cases where you don't want to disassemble half an engine to get to something tucked away in a small nook, the electrics can't be beat. I'm currently using an 18V no-name Chinesium wrench that's got plenty of torque for the few cases where nothing else will work.
@@MrFastFox666 - Quite frankly, if you're in an area that tight, you shouldn't be trying to use a power tool.
I love these tool comparison videos, I've been a fan from the beginning! And even go back and watch these videos before I buy most of my tools now. Great job project Farm
Thanks so much!
This is an outstanding channel PF, you do a great job on comparisons, thank you. :) NC
Thank you very much!
As a Milwaukee tool fan, I’m very impressed by the Ryobi! I will definitely give them a second look the next time I’m in the market for a power tool.
They are both made by tti in china. I really like my ryobi tools.
That’s like saying as a GMC fan your really impressed by they way Chevy performed😂
FYI, Ryobi and Milwaukee are both made by TTI (Techtronic Industries) of China, but different designs and specs.
@@waterloo123100 More like Lexus vs Toyota based on the price and performance.
@@saxamusprime Accept for the fact I’ve never been impressed with Milwaukee tools like I have a Toyota. Air power is the only way for a ratchet. And if you go electric a Dewalt or Makita is better for your money.
Nice comparisons! Thank you for testing the ACDelco, I was curious about that one. Someone else commented on another power ratchet, the Skil brushless power ratchet. Again great videos on your channel!
Thanks so much!
As a snap on owner and user I can say I love my snap on tools and they do have a battery level indicator, it’s the led on side, green is charged yellow is about half and red is low
Thanks for the feedback.
I also own the snap on one and absolutely love it I use it that thing every single day! The guy I work with has both the snap on and Milwaukee one and says he prefers his snap on too…
I have the snap on one at home and Milwaukee at work, the head on the Milwaukee sucks, it also seems
Much slower, the snap on smokes it in speed and power. Milwaukee is good for the money but I really like the snap on one.
I worked as a Diesel mechanic for over 30 years and heavily invested in Snap on tools. Im pretty surprised at the lack of performance of the electric ratchet since I never owned any electric power tools for work but had many younger techs with electric snap on impacts that surprised me with power and battery life. I just preferred the old school air tools,
Air tools. 👍
Just sent in my snap on 3/8 electric ratchet in for repair. After 7 yrs of use. Spent life 4 hrs with me on mc/atvs and the last 3 at an auto shop. Surprised he didn't use the new hi torque version. He is using the first version that was released 8 hrs ago.
I'm an automotive tech as well and I can tell you that the X factor here is long term reliability. I started with Milwaukee and quickly burned the motors up. Over the years I have moved to Snap On and wouldn't look back. After a few years, the head will slip, but it's a quick wave washer swap on the truck. I wouldn't have a problem with Milwaukee for home or DIY use, but I can't recommend it in a commercial setting where it is consistently abused and drenched in various fluids.
Electric tools are nothing but hype in the automotive field. Air is still cheaper and better to use then electric.
@@waterloo123100 Eh, it depends. Hoses are a nuisance and I avoid them when I can. I have a full set of Air Cat air tools, but again....hoses suck in my opinion. Most of my shop has migrated away from air tools unless it's a heavy use case.
I wish we could see a video on wood or metal working machines. Like even 3 lathes against each other or 3-4 bandsaws. But i know that would be too expensive. But my god that really would be a god send. Since so hard to find good reviews on such things.
The only thing about comparing cheap(ish) lathes is that all the cheap ones are all clones of each other and only differentiate on a couple different areas like tool post and such. Actual power, operation, and runout are all basically the same and up to manufacturing tolerances whether you just happen to get a slightly better one or not.
Yeah that would be so cool! This is why in some industries like PC hardware, the reviewers and companies have a symbiotic relationship where the companies will send their latest products to the reviewers for testing at no cost. Sometimes it’s temporary and they send it back but other times they’re allowed to keep it indefinitely so they can use it for future comparisons against other products.
This generally works very well for everyone involved, the companies get free marketing and publicity (if the product is good) in addition to valuable feedback about what’s good or bad. Some companies have tried to strong-arm reviewers into making biased reviews but when that happens the reviewer usually refuses the sample and goes to buy the product themselves. Either way it almost always blows up in the companies face and turns into a huge PR disaster for them. 😂
This makes it so much more affordable for reviewers to test lots of products though. It also doesn’t affect the objective analysis they do since it’s standard industry practice for all companies and tech journalists.
@@LordSaliss thats what i wonder because even looking at grizzly and jet lathes. they seem the same as the basic chinese super cloned lathe of 400-500 dollars. and i'm thinking why not get super cheap. upgrade parts like gears to metal. So in the end i get the same product and after upgrades i get the price of the name brand stuff.
I love your reviews. Succinct, clearly spoken, straightforward, all aspects of the tool reviewed in a quick succession.
Thanks!
As a STEAM teacher, I appreciate your use of the scientific method and how you apply it without being pedantic. I've even had my students analyze your process!
Many mechanics use ultrasonic cleaning machines for small engine parts and carburetors. Could you evaluate a few models? What is the best cleaning solution? Some advocate the use of gasoline or other solvents in mason jars. Some suggest using plastic bags, but not plastic jars because they are less effective because they "absorb the ultrasonic energy."
Thanks! Thanks for the suggestion.
Great video as always. Ryobi has another model with an extended neck and brushless motor for roughly $50 more. If you revisit this test I'd love to see it compared to the rest.
Thanks! Thanks for the video idea.
Love your videos, I'm a professional CT mechanic and have had the snap on 14.4 ratchet for 6 years , never had a single issue with it, it gets worked very hard, handles alot of work and Its extremely tough. Biggest reason I haven't changed it to Milwaukee is the trigger is the best of all of them, and the size, the Milwaukee is like holding a coke can.
For the record all my cordless tools are Milwaukee now, I hate the snap on 18v line and the other snap on 14.4 tools are junk. The ratchet however is a fantastic tool. Overpriced forsure, but a damn good tool. Don't regret buying it one bit
Thanks! Thanks for sharing.
Exactly the trigger makes all the difference with the Snap On
Good reasoning, there's more to a tool than how much power its got and that doesn't really matter much at all with a power ratchet. If you're going to use a tool daily for the majority of your life then why get a tool that'll give you carpal tunnel just because its the same color as your other tools?
@@Senkino5o agreed 100%
It's a tad OVERPRICED but the best I've EVER used tbh
You do such a fantastic unbiased job of testing everything, that i don't buy anything until i watch your videos. My new girlfriend says she needs her brazier tested for elasticity and durability of the titanium wire that will assure her of the required firmness. Thank you so much
Super helpful wife stay of comparisons. With as complex a tool as this, I'm not really surprised the exorbitant Snap-on wasn't the best, and I certainly didn't expect it to be 4x better than the Ryobi. Just not a good value.
Except the ryobi battery IS HUGE!! Unless it is a semi or tractor no real tech would ever consider it.
As someone who has quite a bit of money invested into snap-on I can wholeheartedly agree that all their power tools are junk.
Stick with the ratchets, sockets and wrenches. The rest of your needed tools can be had elsewhere. Lifetime warranty is hard to beat. I have a Box full of snap on and Milwaukee.
Yeah same, I had a snap on 3/8 impact. 4 days after getting it the thing would cut out. I gave it to my snap on guy at the time, he took 4 months to get me a new one. I told him keep the thing and refund me. Switched to Dewalt but I just started buying the milwaukee stuff. Never had any issues with them at all. I swear by snap on hand tools and stuff though.
Agreed Milwaukee does it best for auto technician work when it comes to power tools
With ya there. I like snap on hand tools but with power tools I much prefer matco or Milwaukee
Pretty amazing to me Dewalt doesn't have anything in this line with them arguably being direct competition with Milwaukee. For the smaller battery (12-19v) market dewalt has almost nothing but full line in the medium battery (20v).
Thanks for the feedback.
They have a 20v ratchet. I have one. They’re not easy to find though. At least not when I was looking.