Good video mate, but at 22.31 shouldn't there be a plug on the end of the lamp wires? How did you connect the wires, did you just push the 2 wires into the loom plug holes?
Good vid sir! Not sure I'd necessarily bother with the switch and wiring loom, I'd probably take a feed off the sidelight circuit (depending on the necessity for the switch). With the switching on and off for each mode, can you get it to "default" to just the low setting, or do you have to use the switch to cycle it?
+Lurch OnABike First power on is high power, power off and back on within 10 seconds to low power and again for strobe Once you have the setting you want you can have that setting every time as long as the power off / on is longer than 10 seconds
Naz Arshad . Hi Naz, the lights are waterproof but I removed the lens and added more silicone sealant to be on the safe side. Still working fine and waterproof 👍🏻
figure it out yourself? :) Any information video on UA-cam is a bonus, be grateful of any content anyone willing to upload for everyone, its not their job to teach your baby brain how to do things lol
![CHEAP motorcycle LED auxiliary lights - [CREE U7 Installation + Overview]](http://i.ytimg.com/vi/6Qbzv-HPboU/mqdefault.jpg)
Great video 😊
Very nice installation. Well done.
Thanks for a complete detail installation. Very informative.
Very well explained and executed! Thank you!
Can i not just wire them to back of headlight
Well done!
Do they have to be switched?
Good video mate, but at 22.31 shouldn't there be a plug on the end of the lamp wires? How did you connect the wires, did you just push the 2 wires into the loom plug holes?
Hi how did you stop these lights strobing?
HELP!! Is the on/off rocker switch WATERPROOF? Thank you.
Thanks for going to the bother of recording all that, well explained. I'm looking at doing something similar on my deauville.
Do you have a product link on amazon or ebay?
Thanks very nice video
What about the flashing mode is this legal?,
Can I glue them on with Prit?
Poot could always give it a go 🤔
cheers buddy,..given me a idea that...ride safe
i have a honda varadero 125 could i fit these what bout the watts and amps would it be to strong ???
How are thay on the varader
Wow and it only took 27:45 minutes!!! They do a great job these new cree whateva there called.
+banditnev Hi Nev, It wasn't much longer about another 20 mins with soldering connections etc.
Good vid sir! Not sure I'd necessarily bother with the switch and wiring loom, I'd probably take a feed off the sidelight circuit (depending on the necessity for the switch). With the switching on and off for each mode, can you get it to "default" to just the low setting, or do you have to use the switch to cycle it?
+Lurch OnABike First power on is high power, power off and back on within 10 seconds to low power and again for strobe
Once you have the setting you want you can have that setting every time as long as the power off / on is longer than 10 seconds
+tingbiker Thanks, that's good to know. Did you say £25 the whole lot delivered to your door? And was that UK stock?
+Lurch OnABike. Spot lights £22 delivered from Wednesbury, UK seller econlineer on eBay
Were they U5 or U7 lights?
Nick Heinz . Hi Nick they are the U5 type👍🏻
led light waterproof or normal ans me
Naz Arshad . Hi Naz, the lights are waterproof but I removed the lens and added more silicone sealant to be on the safe side. Still working fine and waterproof 👍🏻
thanks bro
I'm sea sick !
With all that camera movement it's very hard to watch, and not exactly explained how to connect things. You could have done better.
figure it out yourself? :) Any information video on UA-cam is a bonus, be grateful of any content anyone willing to upload for everyone, its not their job to teach your baby brain how to do things lol