Removing BAFFLES on a 2002 HARLEY DAVIDSON SPORTSTER 883!!

Поділитися
Вставка
  • Опубліковано 2 лис 2024
  • This was a rather easy diy job as long as you have the proper tools. although its easy im still not sure its worth it. Honestly, in person I didn't notice much of a difference.
    DONT CLICK THIS bit.ly/2uMbIrF
    Follow me on Instagram @B_mautofied
    #BradzBuildz #DIY #Harley

КОМЕНТАРІ • 30

  • @DaveDanger-v9g
    @DaveDanger-v9g 4 місяці тому

    Good video I am thinking about doing that. Or a set of 2 into 1 LAF pipes.

  • @DaveDanger-v9g
    @DaveDanger-v9g 4 місяці тому

    Live to ride, Ride to live.

  • @mackoysr1
    @mackoysr1 3 роки тому

    What tool did you use to use to pry inner slep on out

    • @BradzBuildz
      @BradzBuildz  3 роки тому +1

      I used a whole saw to cut them and a pry bar to knock them out

  • @xxtropicalfriendsxx1537
    @xxtropicalfriendsxx1537 6 років тому

    Never give up great vid someday you will be really famous

  • @dylanreinke2440
    @dylanreinke2440 Рік тому

    What size hole saw?

    • @BradzBuildz
      @BradzBuildz  Рік тому

      It’s been so long I can’t remember for sure but I think a 2 1/4”

  • @donneal1352
    @donneal1352 5 років тому +1

    Did it change the way it preformed?

    • @BradzBuildz
      @BradzBuildz  5 років тому +2

      Just had to adjust the carb a bit

    • @donneal1352
      @donneal1352 5 років тому +1

      @@BradzBuildz Thank you for your time.

    • @BiztoryTime
      @BiztoryTime Рік тому

      @@BradzBuildz did you re jet it after or just adjusting the air screw?

    • @BradzBuildz
      @BradzBuildz  Рік тому +1

      I adjusted the air screw. Still ran great!

    • @BiztoryTime
      @BiztoryTime Рік тому

      @@BradzBuildz awesome!! Thanks a bunch! Picking up my first sportster this week 😁💪🏻

  • @blaisejmaf17
    @blaisejmaf17 3 роки тому +1

    Build some shelves my man...you won't regret it

  • @mackoysr1
    @mackoysr1 3 роки тому

    Hi what inner tool do used to take the baffle out on the slip on

    • @hobojuanita7756
      @hobojuanita7756 2 роки тому

      He was using a drill that makes holes for door knobs ect.

  • @anilrehmatullah7906
    @anilrehmatullah7906 2 роки тому

    my dad says my 02 harley sounds like a honda maybe I should try this

  • @oklahomamudmotor5639
    @oklahomamudmotor5639 5 років тому

    Nice glasses Elton !

  • @JBetoRodrigues
    @JBetoRodrigues 5 років тому +2

    I think would better you show exactly what you did and took out of that thing...instead of showing your back. Bad video really. You only show the tool you used,,,,not even that !

  • @fashionsmile21love75
    @fashionsmile21love75 6 років тому

    Nice vid

  • @jasonstout6328
    @jasonstout6328 5 років тому +4

    Less time explaining the crap in the garage and show the steps you had to perform. Like why did you have to take the pipes off? Other vids are done with them left on.

  • @ProfessionalDad
    @ProfessionalDad 4 роки тому +1

    use your words

  • @hobojuanita7756
    @hobojuanita7756 2 роки тому +1

    He blocks every thing with his back and 1/2 the video is him talking about the weather his truck and the junk that has to be moved in the garage. Don't waist your time on this video

  • @sophicutler1492
    @sophicutler1492 3 роки тому

    So… s’more interesting vehicle for the channel because the bike is boring? You must’ve bought a Honda Accord and live on The edge!
    Video took too long for you to get to the point. Your neighbors hate you. Especially after sleeping with the daughter and mom at the same time and oh ya this was a waste of time. Wont rate as I’m afr

    • @BradzBuildz
      @BradzBuildz  3 роки тому

      Your obviously to lazy to go to my channel and realize this was my fourth video ever made so of coarse its not that good. You also wouldnt have been stupid enough to think i bought a honda lmao

    • @anilrehmatullah7906
      @anilrehmatullah7906 2 роки тому

      @@BradzBuildz i think it was fine shit im not even posting videos

    • @BradzBuildz
      @BradzBuildz  2 роки тому +1

      @@anilrehmatullah7906 Thanks, I appreciate you