The addition of the weights has a direct impact on the indicator! Thus the addition of weights, in and of itself, cause errors in your torque readings. Compensation must be addressed. You indicate 'Nozzle adjustment' though nothing is illustrated. Can you speak???
More pressure and less waterflow. 66l/min is too much for such a small Pelton. It needs a smaller nozzle. Mine which I made by myself and uses the regular house water tap needs just 6l/min with a pressure of 2.5bar. It produces 14 Volts and 1.7 Amps or 24 Watts with 1700rpm. But the Pelton which I made by myself is really simple. I will buy a 3d printer and will print a perfect real micro Pelton (it is downloadable for free on internet) with about 10-15 cm diameter. Then I should get over 30 Watts from the house water tap. Pelton needs pressure. Waterflow is less important.
Am sure you are aware that if you hook a low rpm axial flux generator and reroute the output power to run the same water pump it might become a device that might run for a very long long time without using external power source.
Is this a product you are marketing for engineering education?
The addition of the weights has a direct impact on the indicator! Thus the addition of weights, in and of itself, cause errors in your torque readings. Compensation must be addressed. You indicate 'Nozzle adjustment' though nothing is illustrated.
Can you speak???
More pressure and less waterflow. 66l/min is too much for such a small Pelton. It needs a smaller nozzle. Mine which I made by myself and uses the regular house water tap needs just 6l/min with a pressure of 2.5bar. It produces 14 Volts and 1.7 Amps or 24 Watts with 1700rpm. But the Pelton which I made by myself is really simple. I will buy a 3d printer and will print a perfect real micro Pelton (it is downloadable for free on internet) with about 10-15 cm diameter. Then I should get over 30 Watts from the house water tap. Pelton needs pressure. Waterflow is less important.
peter schiller how u made pelton by ur in home...can u please tell me so that I can also try to develop my self in home
Excelente proyecto seria genial que puedas compartir el estudio.
Am sure you are aware that if you hook a low rpm axial flux generator and reroute the output power to run the same water pump it might become a device that might run for a very long long time without using external power source.
Nobody use the same water very strange and so easy to do.
Me gustaría cómo funciona y cómo es el regulador de velocidad que responde a los cambios de potencia
no hay control de velocidad en esta máquina, el ajuste es manual
Sure
I sent you email, I didn’t get any response from you. What’s your best phone number I can reach on?
Dear Dee Why, you can contact us in our website www.didatec-technologie.com