Hello. Thank you for the informative about this subject in tia portal. I was just wondering if you have a video on how to migrate a s300 plc program to the new 1500 tia portal PLC. thanks you again.
Does anyone know how to correct the Siemens S71200 backup with software and hardware? The project was created with tiaportal v11 and in this version the backup can only be backed up by the software, thus creating a backup that needs corrections. I can pay for the help.
I tried this on my Siemens ET200sp s-7 1500 PLC but every time i hit the upload. the error says it cancelled the upload to the device. I see the PLC on my laptop after search and I can flash the PLC from my laptop but it cancels the upload when I press upload. How can I correct this?? Thanks.
Once I did it but didn't worked at all. It doesn't upload Forced values (or forced tables) so I couldn't do it as simple because it wasn't easy to know which tags had to be forced, for example in that case, some digital inputs.
Thank you for this tutorial , I have a question when tying to do backup and when uploading it fail to do that and it shows the message --Action cancelled before uploading from the device, what could be the problem?
Dear please how can i reconfigure sinamix drive under tia portal after doing ubload from the plc and where i can find the drive after upload the software from the plc please
What about the GSD files. Say I have 10 special. hardware connected to the plc. When I change something in one GSD file, do I need all the other GSD files to save the updated hardware configuration
Nice sir, in WinCC flexible i am taking 256 color object from graphics but in high bit 1 (Run bit) i put green color but during high bit green color not showing. But enhance object is ok. but i want to take an actuator from graphics. please advise me for this.
Can you also download from HMI? We have PLCs and the contractor who installed them did not give us correct backup program. The programs we were given as backup are different from the ones running in the controllers . The system uses MCCG HMI , so how can we get backup for both PLC and HMI
What if my CPU is in another network, that im connected to? How do i "Upload device as new station"? I can go online on the CPU through routing, but not find it when looking for it
Hi! Im trying to upload the program of s71200 and Im using Tia portal V13. But It has error appearing. Says.... The online module does not support uploading pg/pc. help please
Is it possible to protect the program with a password? I mean, I have a PLC, let's say S7-1200 or S7-1500, running with a working program. I connect the my PC to the PLC and follow the steps described in this video to backup the program. Now I have a fully working project on my hands. In my case, I would want to have some protection there. I don't want random people to be able to go our PLC's and backup our programs and be able to use them. Would it be a possible to have a password prompt before starting the upload? Or would it be possible to have all the data hidden in the project if no correct password is given?
Hi i am trying to upload from TIA portal version 13 to module 6ES7 214 - 1AG31-0XB0 V3.0, I AM GETTING ERROR MSG LIKE LOADING WILL NOT BE PERFORMED BECAUSE PRECONDITIONS ARE NOT MET, RESTRICTION FOR UPLOADING TO PG/PC, The online module 6ES7 214 - 1AG31-0XB0 V3.0,does not support uploading to PG/PC. PLS advice what to do.
...and, at this point, at least 3 more questions arise spontaneously... Is there something similar about retrieving the HMI project?? Are there ways to get the actual runtime on a new project (or the same you used to retrieve the sw as you explained)?? ... and what if you would like to retrieve on the project a runtime backup stored on the HMI SD-card??
Hi Hegamur. I have a question about this topic. I had a one project and backup also. But my backup and actual program was different. I tried to this method for get the backup from plc but i couldn't get backup. The project was encrypted. Is that why I didn't get it?
What if I try to go online and upload and the upload button says update instead? I"m a newb for siemens. I'm allen bradley guy. Is this a version compatability thing. The plc has v15. I have 17 installed? Thanks in advance
I have a question. My factory buy a equipment but the seller don't want to give us the bakup and in the training of the equipment i see a well organization of the program and he explain based in that organization but when i go online without the backup i see another organization, then, my question, when i upload the program i'm going to have the same organization that when he download or not?
Hello, I have a CPU 1214C DC/DC/DC and only view as available station but when i want upload to pg says: "The select object PLC_1 cannot be uploaded from device". I have TIA v13. Could you help me please?
Question: if give a laptops with multiple versions of software and a plc how do you tell what kind of version that is already uploaded on a plc. For example Tia portal version 15.1 or versions 16 or any other version.
Hi thanks for the awesome videos. Helping me out tons. I’ve been trying to figure out if it’s possible to do online edits on an S7-400 or S7-1200. I guess I mean do an edit offline and then send only the changes so the plc stays running and operational. Thanks.
Hi bro ,i have S7 317-C cpu in my project, but we lost the latest program. I tried with some recent backup to connect to PLC and compare, but i am unable to compare my blocks which was written using Graph language, but i could able to compare the online blocks for blocks which was written in ladder language. Could you pls suggest how to retrieve my FB's which was written in Graph or tell me how to compare online. Thanks
Hi sir, I tried the same way that you did in the video while uploading am getting below error. 1) loading will not be performed because precondition are not met. 2) restrictions for uploading to PG/ PC
Depending on the firmware version of your device, it might not be possible to upload the project. Try to check on the internet, if your current firmware supports uploads
IS IT POSSIBLE TO UPLOAD FROM A LOCKED CPU, Program backup lost and CPU also locked by system integrator and ran away. Now customer not able to change anything, we have to upload from CPU. Please advise is it possible?
I have uploaded a project from ET200S CPU. Almost everything seems to be ok except one FB which is showing that, "SCL blocks uploaded from an S7-300/400 module cannot be edited". Eventually I cannot download this project to another CPU. What can I do now in this situation?
What is the difference of this in archive/retrieve? genuine question. I want to know, so if our HMI encounters any error and need to download hmi program again, I will know. Thanks in advance
Hi, Thank you for such a nice explanation. I am facing an issue like the PLC is running TIA V14 SP1 but my PC has V15.1 and I am not able to create a backup file. Any suggestion will be highly appreciable.
I tried to migrate a program from s7 300 toTIA, but tags and hardware Config missing. Later update the program with simatic manager and downloaded to PLC. I am using windows 8.1 OS. Is there any option to install simatic manager and wincc flex in windows 8.1? Old plc system expecially S7 300 are mostly done in simatic manager. The think is that nobody want to reprogram the whole program of a running old system with Tia for a minor change. I have worked with one profibus ASi interface link at site which is old and obsolete its production. The program done in simatic manager. But new model of same components not available in simatic mamager. Is there any option can I update the simatic manager library for new model NUMBER?
Thanks a lot Phili... Just a quick question, will there be issues/errors when we do it using a different software version? Like for example, we do not have any idea what version was being used to create the program (1500 CPU) many years back and now I need to upload it as a new station using TIA Portal V18?
Thanks a lot for making this knowledgeable & simple video. I'm a fresher & want to make career in IA, so what necessary skills that required to make bright career in this field? Please guide, Awaiting respons. Thanks in advance.
Thank you for this tutorial , I have a question . I want asking you if there are a videos about Industrial communication ( Profibus , Industrial Ethernet , Modbus , MPI , Profinet )
One video won't be enough to cover those topics. There is quite a lot to all of them! Will make some stuff later on, but mainly on PROFINET, as it is the one being developed the most and I think will be the one true standard at some point. (except of course for some Sensor/Actuator to PLC interface, but that is not really communication)
Hegamurl, you have a lot of good videos. Thank you. I have 1 question for this video, if we upload the program from the PLC, whether is it TIA or Simatic Manager, will the Connection or NetPro uploaded as well? Thanks for your respond in advance.
For Siemens HMI you don't have any option to upload the project! You can only get an image using Siemens Automation Tool that you can download to a new HMI for example, soo you can not edit and etc.
first of all thank you for making very informative and learning video for us. how we can save all current parameter from running plc with uploading Program like save all PID running parameter etc
Thanks a lot! A question, when I do this upload, the HMI or SINAMICS Driver are include in this upload or I have to do upload of HMI and Sinamics using others software? Regards and congratulation
hey, it's always fun to watch your videos... I've learned so much from you, thanks! I have one question on uploading a project... do you have to know the IP address of the PLC? do you have to be on the same subnet, or is it ok if you leave the ethernet adapter on DHCP? I'm trying to upload a code from an old cpu 315-2 pn/dp... hopefully I can do that from TIA Portal. Thanks again!
Hello, congrats for sharing all, very helpful. Just a question, when you Upload the program from PLC to PC and go online to monitor it, this process will not stop PLC operation? The process will be working normally no stop at all because of uploading?
I'd like to be honest... have been working for years on Tia and didn't know about this "life-saving" chance... This could solve a huge problem to my colleagues!!! I'm looking forward to try!
This so great. Omron (CX-One) had this exact feature 15 years ago, and then I started to work with the 300 series. It was always a nightmare scenario to loose the program and the project backup. Btw, who the hell down-voted this???
you prolly dont give a damn but does anybody know of a way to get back into an Instagram account? I somehow forgot the password. I love any tips you can give me!
@Colten Westin i really appreciate your reply. I got to the site through google and im trying it out atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
Thanks for this! Love your videos! Quick question: I’m using a 1200 in a machine that is close to 10 years old. When I try to upload I get the error “the configuration was created with an earlier version of the TIA portal and cannot be uploaded.” Is there any way for me to get this program? Even just the working version with no plc tags, etc.
@@EvanRobert Yeah, for some reason that won't work. If you have the original program on your computer, you can upgrade it to a newer version. You can't download the older program from a PLC with a newer TIA version...
@@KanedaNLD Ya, it's strange. I don't have the original. Someone else programmed them at my work a number of years ago and is no longer around. So I had to recreate the program based on how the machine worked. I managed to remake it and everything is working and now I'm able to tweak it how we need to.
Hi Hegamurl Nice job man,through your videos its good to correlate with real life scenarios.Good job pro. I do have any issue while downloading backup from physical PLC....I have 2 PLC of 1212C and 1214C....When I tried to upload first one got downloaded and while doing the same for the second one it's show station name is not unique I tried to change device name....but still I faced issue .....could you pls support on this...mean time I tried to upload the config from HMI using same method....that also failed....as I don't have back up for any of my station PLC,driveS120,HMI..I would appreciate your reply or a new video...
Thanks for the tutorial! I have a question. Is it possible to upload an hmi project in order to edit it? Or the upload only covers the plc hardware/software?
Hello. Thank you for the informative about this subject in tia portal. I was just wondering if you have a video on how to migrate a s300 plc program to the new 1500 tia portal PLC.
thanks you again.
Why doesn't this work with a s7-1200 safety PLC
Make a tutorial baout hardware configuration to change GSD files and download.
Thank you for easy understanding step for upload and backup PLC
how about in TIA - HMI? - can you make a tutorial that to be upload and editable
Does anyone know how to correct the Siemens S71200 backup with software and hardware? The project was created with tiaportal v11 and in this version the backup can only be backed up by the software, thus creating a backup that needs corrections. I can pay for the help.
Something for upload need GSD files offline in your PC how to do of this case and haven't GSD file
I tried this on my Siemens ET200sp s-7 1500 PLC but every time i hit the upload. the error says it cancelled the upload to the device. I see the PLC on my laptop after search and I can flash the PLC from my laptop but it cancels the upload when I press upload. How can I correct this??
Thanks.
Once I did it but didn't worked at all. It doesn't upload Forced values (or forced tables) so I couldn't do it as simple because it wasn't easy to know which tags had to be forced, for example in that case, some digital inputs.
Thank you for this tutorial , I have a question when tying to do backup and when uploading it fail to do that and it shows the message --Action cancelled before uploading from the device, what could be the problem?
Very useful staff as usual! Thanks!
You are very welcome!
Dear please how can i reconfigure sinamix drive under tia portal after doing ubload from the plc and where i can find the drive after upload the software from the plc please
What about the GSD files. Say I have 10 special. hardware connected to the plc. When I change something in one GSD file, do I need all the other GSD files to save the updated hardware configuration
I had the same trouble with Metal work valve bank EB80. Can't find exactly version of GSD file. :((
Is this the same that selecting an unspecified device and do the upload?
Nice sir, in WinCC flexible i am taking 256 color object from graphics but in high bit 1 (Run bit) i put green color but during high bit green color not showing. But enhance object is ok. but i want to take an actuator from graphics. please advise me for this.
Please make a video to upload HMI
Can you also download from HMI? We have PLCs and the contractor who installed them did not give us correct backup program. The programs we were given as backup are different from the ones running in the controllers . The system uses MCCG HMI , so how can we get backup for both PLC and HMI
Hi there. May I have your assistance with PLC s7-1500 communication to ET200MP. There's a network error
Thank you so much!! This is exactly what I was looking for
What if my CPU is in another network, that im connected to? How do i "Upload device as new station"? I can go online on the CPU through routing, but not find it when looking for it
You can upload only Tia13 and later projects.
Hi!
Im trying to upload the program of s71200 and Im using Tia portal V13. But It has error appearing. Says.... The online module does not support uploading pg/pc. help please
That was a brillantly simple way to explain it. Thanks very much :-)
Can we do this process for TIA portal v12?
Is it possible to protect the program with a password? I mean, I have a PLC, let's say S7-1200 or S7-1500, running with a working program. I connect the my PC to the PLC and follow the steps described in this video to backup the program. Now I have a fully working project on my hands. In my case, I would want to have some protection there. I don't want random people to be able to go our PLC's and backup our programs and be able to use them. Would it be a possible to have a password prompt before starting the upload? Or would it be possible to have all the data hidden in the project if no correct password is given?
Hi i am trying to upload from TIA portal version 13 to module 6ES7 214 - 1AG31-0XB0 V3.0, I AM GETTING ERROR MSG LIKE LOADING WILL NOT BE PERFORMED BECAUSE PRECONDITIONS ARE NOT MET, RESTRICTION FOR UPLOADING TO PG/PC, The online module 6ES7 214 - 1AG31-0XB0 V3.0,does not support uploading to PG/PC. PLS advice what to do.
Plsase how can I make the s7-1200 in the tia v11 full backup?
Does the TIA V16 or newer allow to upload HMI program from device to PC?
...and, at this point, at least 3 more questions arise spontaneously...
Is there something similar about retrieving the HMI project??
Are there ways to get the actual runtime on a new project (or the same you used to retrieve the sw as you explained)??
... and what if you would like to retrieve on the project a runtime backup stored on the HMI SD-card??
Hi Hegamur.
I have a question about this topic.
I had a one project and backup also. But my backup and actual program was different. I tried to this method for get the backup from plc but i couldn't get backup. The project was encrypted.
Is that why I didn't get it?
can I get HMI original project which include in hardware??
What to do if i don't know the TIA version in which project was made earlier. Any suggestions?
Sir,through the tia potral ...can take the HMI backup?....and differ between simatic manager and tia .....
What if I try to go online and upload and the upload button says update instead? I"m a newb for siemens. I'm allen bradley guy. Is this a version compatability thing. The plc has v15. I have 17 installed? Thanks in advance
can you still backup up a lock siemens s7 1500
I have a question. My factory buy a equipment but the seller don't want to give us the bakup and in the training of the equipment i see a well organization of the program and he explain based in that organization but when i go online without the backup i see another organization, then, my question, when i upload the program i'm going to have the same organization that when he download or not?
Thank u sir
But how do i know the address IP of the plc ?
do you make pid controle in s7 300 if you have please send me yours link
Hello, I have a CPU 1214C DC/DC/DC and only view as available station but when i want upload to pg says: "The select object PLC_1 cannot be uploaded from device". I have TIA v13. Could you help me please?
Thank you for the clear video!
I ran into a problem. The PLC is running TIA V14 SP1. My field PG M6 has V16.
TIA won't let me back-up
Hi Jos, I am also going through the same problem. Did you find the solution for the same?
Thanks
@@chandan7550 Nope, don't have a solution.
Don't think it's possible to be honest...
you can try to use TIA V14 or TIA V15, maybe this way can solve this problem.
what about the HMI program?
dear pls if i try to upload program & tel upload cancel this mean this plc protected. if protected how i can upload thank u
Question: if give a laptops with multiple versions of software and a plc how do you tell what kind of version that is already uploaded on a plc. For example Tia portal version 15.1 or versions 16 or any other version.
Hi thanks for the awesome videos. Helping me out tons. I’ve been trying to figure out if it’s possible to do online edits on an S7-400 or S7-1200. I guess I mean do an edit offline and then send only the changes so the plc stays running and operational. Thanks.
When The Program have HMI . How to Upload Program to HMI ?
can we upload a program in TIA Portal V15 from hardware if it was downloaded into the hardware through TIA Portal V14 or less??
Hi, could you also share some videos based on CODESYS software?
Hi bro ,i have S7 317-C cpu in my project, but we lost the latest program. I tried with some recent backup to connect to PLC and compare, but i am unable to compare my blocks which was written using Graph language, but i could able to compare the online blocks for blocks which was written in ladder language. Could you pls suggest how to retrieve my FB's which was written in Graph or tell me how to compare online. Thanks
Hi sir,
I tried the same way that you did in the video while uploading am getting below error.
1) loading will not be performed because precondition are not met.
2) restrictions for uploading to PG/ PC
Depending on the firmware version of your device, it might not be possible to upload the project. Try to check on the internet, if your current firmware supports uploads
@@hegamurl7434 Thank you sir
@@manjunathakjmanju6899 Hello @manjunatha i am also facing same problem.please could you tell me how do you solve your problem.
@@jamaluddin262 the firmware 4.0 high of PLC can support this function
That the solution i was looking for thank you very much. I have to take care of legacy. I there a firmware version necessary?
Thanks sir for your valuable information, could you tell me that how we can get uploaded all the data from plc to pc or pg, is there any option ?
Das it olso works when the program / bloks are protectid?
is it possible to upload the program from S7 1500F version15.1 using Tia V16..??
IS IT POSSIBLE TO UPLOAD FROM A LOCKED CPU, Program backup lost and CPU also locked by system integrator and ran away. Now customer not able to change anything, we have to upload from CPU. Please advise is it possible?
I have uploaded a project from ET200S CPU. Almost everything seems to be ok except one FB which is showing that, "SCL blocks uploaded from an S7-300/400 module cannot be edited". Eventually I cannot download this project to another CPU. What can I do now in this situation?
What is the difference of this in archive/retrieve? genuine question. I want to know, so if our HMI encounters any error and need to download hmi program again, I will know. Thanks in advance
Nice vids..but unfortunately i couldnt upload to my pc..said action cancelled by user
Click on retain value block to backup current value, is I am right sir?
I had seen your DB block video.
Please do correct me
Hi, Thank you for such a nice explanation. I am facing an issue like the PLC is running TIA V14 SP1 but my PC has V15.1 and I am not able to create a backup file. Any suggestion will be highly appreciable.
Hai bro I need any book regarding siemens communication and programing procedure from basic to advance
I appreciate your work, I have a Chinese program with OB is protected by a password
I want to ask how to broken this password
Esalem Alejkum , i have the same problem like you , did you find the solution ?
can we get HMI backup as well
I tried to migrate a program from s7 300 toTIA, but tags and hardware Config missing. Later update the program with simatic manager and downloaded to PLC.
I am using windows 8.1 OS.
Is there any option to install simatic manager and wincc flex in windows 8.1?
Old plc system expecially S7 300 are mostly done in simatic manager. The think is that nobody want to reprogram the whole program of a running old system with Tia for a minor change.
I have worked with one profibus ASi interface link at site which is old and obsolete its production.
The program done in simatic manager. But new model of same components not available in simatic mamager. Is there any option can I update the simatic manager library for new model NUMBER?
can u help me with my doubts.
1. I have TIA portal v15 but i dont know what version is in S7-400 plc. how i can edit the software and downoad again
What about passwords???
Just upgraded to TIA V15.1 is this process this good for the safety integrated PLC/
Thanks a lot Phili... Just a quick question, will there be issues/errors when we do it using a different software version? Like for example, we do not have any idea what version was being used to create the program (1500 CPU) many years back and now I need to upload it as a new station using TIA Portal V18?
Thanks a lot for making this knowledgeable & simple video.
I'm a fresher & want to make career in IA, so what necessary skills that required to make bright career in this field?
Please guide, Awaiting respons.
Thanks in advance.
Hello..as always nice and clear video about s7..may i ask how about if there is an hmi..can i also upload the program included in that project plc
Thank you for this tutorial , I have a question . I want asking you if there are a videos about Industrial communication ( Profibus , Industrial Ethernet , Modbus , MPI , Profinet )
One video won't be enough to cover those topics. There is quite a lot to all of them! Will make some stuff later on, but mainly on PROFINET, as it is the one being developed the most and I think will be the one true standard at some point. (except of course for some Sensor/Actuator to PLC interface, but that is not really communication)
Hello, thanks for the channel! We have two problems: How will we know the version of TIA Portal > v13, 14, 15... and if you have passwords...
you can use the online access device
Hegamurl, you have a lot of good videos. Thank you. I have 1 question for this video, if we upload the program from the PLC, whether is it TIA or Simatic Manager, will the Connection or NetPro uploaded as well? Thanks for your respond in advance.
Very Helpful video, can you do the same for the HMI?
For Siemens HMI you don't have any option to upload the project! You can only get an image using Siemens Automation Tool that you can download to a new HMI for example, soo you can not edit and etc.
first of all thank you for making very informative and learning video for us. how we can save all current parameter from running plc with uploading Program like save all PID running parameter etc
If the project has a password and I don't know it, is it possible to make a backup? is there any standard password?
Thanks a lot!
A question, when I do this upload, the HMI or SINAMICS Driver are include in this upload or I have to do upload of HMI and Sinamics using others software?
Regards and congratulation
maybe the HMI program doesn't upload to PC and the driver can upload use Starter or SCOUT.
Thank you for the Video, Very helpful. Quick question is there a way to upload even when there is a Fail-Safe program loaded into the PLC?
Do you have any videos on TIA basics etc, as I'm new to it?
Ultimately, does this apply to S7-300/400?
I see you using a 1500 instead
Perfect! Thank you!
hey, it's always fun to watch your videos... I've learned so much from you, thanks! I have one question on uploading a project... do you have to know the IP address of the PLC? do you have to be on the same subnet, or is it ok if you leave the ethernet adapter on DHCP? I'm trying to upload a code from an old cpu 315-2 pn/dp... hopefully I can do that from TIA Portal. Thanks again!
pc side need to enter IP address
Hello, congrats for sharing all, very helpful. Just a question, when you Upload the program from PLC to PC and go online to monitor it, this process will not stop PLC operation?
The process will be working normally no stop at all because of uploading?
Very helpful! Thanks!
Thanks
I'd like to be honest... have been working for years on Tia and didn't know about this "life-saving" chance... This could solve a huge problem to my colleagues!!! I'm looking forward to try!
pretty cool, I don't think it's possible to back up from a physical HMI if you don't have the program, correct?
This so great. Omron (CX-One) had this exact feature 15 years ago, and then I started to work with the 300 series. It was always a nightmare scenario to loose the program and the project backup.
Btw, who the hell down-voted this???
you prolly dont give a damn but does anybody know of a way to get back into an Instagram account?
I somehow forgot the password. I love any tips you can give me!
@Colten Hank Instablaster =)
@Colten Westin i really appreciate your reply. I got to the site through google and im trying it out atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Colten Westin it worked and I now got access to my account again. Im so happy:D
Thanks so much you saved my account :D
@Colten Hank Glad I could help =)
Thank you
Thanks for this! Love your videos!
Quick question: I’m using a 1200 in a machine that is close to 10 years old. When I try to upload I get the error “the configuration was created with an earlier version of the TIA portal and cannot be uploaded.”
Is there any way for me to get this program? Even just the working version with no plc tags, etc.
You are trying to download from the PLC, is that correct?
@@KanedaNLD Yes, I'm trying to get the original program that is on the PLC, back onto my PC.
@@EvanRobert Yeah, for some reason that won't work. If you have the original program on your computer, you can upgrade it to a newer version. You can't download the older program from a PLC with a newer TIA version...
You can try an old version of TIA Portal
@@KanedaNLD Ya, it's strange. I don't have the original. Someone else programmed them at my work a number of years ago and is no longer around. So I had to recreate the program based on how the machine worked. I managed to remake it and everything is working and now I'm able to tweak it how we need to.
Very very useful sir
its very informative videos,,god bless sir
Hi Hegamurl
Nice job man,through your videos its good to correlate with real life scenarios.Good job pro.
I do have any issue while downloading backup from physical PLC....I have 2 PLC of 1212C and 1214C....When I tried to upload first one got downloaded and while doing the same for the second one it's show station name is not unique I tried to change device name....but still I faced issue .....could you pls support on this...mean time I tried to upload the config from HMI using same method....that also failed....as I don't have back up for any of my station PLC,driveS120,HMI..I would appreciate your reply or a new video...
good information Thank you
thank you v much
Thanks for the tutorial! I have a question. Is it possible to upload an hmi project in order to edit it? Or the upload only covers the plc hardware/software?
you don't upload the HMI project ,the HMI program doesn't support upload.thans
thx you so much :)
Gracias
thank youu
is this possible to do from a HMI? i have a root screen that was really long to create and can't find the file. i want the screen from the HMI