Це відео не доступне.
Перепрошуємо.
Make Concrete Statues FAST😃 How To Pour Concrete Into Rubber Molds For Statues FAST SETTING CONCRETE
Вставка
- Опубліковано 19 тра 2020
- How to pouring fast Setting Concrete into Rubber molds . Make Concrete Statues Fast
www.paypal.com/donate/?hosted...
So glad I found this video!! I bought the fast setting and I just knew I wouldn't be able to use it. Thanks so much for sharing.
Nice man, I usually use a mix of rapid set cement and gravel which is cured in about an hour.. but it is $25 a bag so your method is a lot more economical and I am going to try it
Thank you for a very educational video. I learned a lot!
Nice straightforward video also, thanks for sharing
Thanks. That is so much fast than the yellow bag.
Yep
Show parabéns seu projetos mais um inscrito
back again,can getsimilar concrete mix in egland but its called postcrete for putting up posts,also just used a fittness vibrating exercisemachine that canbe used to get bubbles out of mix if youcant afford a vibrating table
Ever consider making a video of how/where you sell your statues? Or having a patreon? People would for sure pay you for all of this info.
I sell on Facebook market place
I really love your videos. Very very helpful. But you make video about pouring concrete with latex molds that has no backup ?
you should make a small vibrating table and make your mix a bit wetter ..i usto use soapy water to coat the latex before pouring the mix.make a bath of soapy water and dip them in ..then pour and put on vibrating table and add waste blocks ..we used the fast concrete setting mix mainly in the winter ..we manufactured tonnes of the stuff daily ..and paving stones then moved onto manufacturing block paving for drives and walkways
I try not to mix too runny, if you mix too runny, the concrete loses its strength. I thought about getting a vibrating table. The problem with a vibrating table for me is, i like to pour a dozen statues at a time. I have found shaking the molds after pouring is helping get rid of most of the air bubble.
Thanks for the subscription :)
Great video! What is the percentage of the alcohol ? How do clean out concrete out of buckets once your done? Weird question , but I live in an Apt , curious. Also what size wire are using in statue?
can you make video on how to make the rubber and the fibreglass mould please 🙏
Did you make your molds? If so that’s awesome. I guess those don’t have undercuts right or are those two part molds.
Thanks for your videos. Have you done one on making the latex mold ? I had a look at your list but could not find one. Saw your fibreglass one but need to make the rubber mold.
Yes he has one explaining the latex
Going to make some more!
Can I use this quikconcrete to make a concrete seat also? Will it be strong enough?
Cool 😮. How do you make the mold
Where do you buy the molds , I want some planters molds and can’t find them nowhere . Especially larger ones 15" and up
do u make your own molds? I bought bunch of Star Wars statues and now I kinda wanna try making my own Thor hammer.
Thanks for the video! I am using the yellow bags and mixing by hand but I notice especially around the neck of my Buddhas that I'm getting gritty areas of sand and rock that I have to touch up with patch. Is this from not mixing enough??
Sounds like it might be too watery? Try the red bags and let me know how that works
You can also try adding a bit more portland cement only and a bit less water
Where do you sell them? Garden centers? Your accent sounds like upstate new York
Awesome we’re are u at ?
Johnathan, we are trying to find large religious statue molds. Do you know where we could find them?
Where you get molds like that and biggest ?
What if you don't like to pour with the rocks and just like to pour straight concrete?
Thank you for sharing , it is so hard to find a video like this one. You really have to move fast with that red bag . I have two moulds I need to fill and I’m trying to learn the best easy way . I think I’ll try your way. Can you tell me where you purchased to food grade castor oil? Thanks again
Castrol oil was purchased from a hair dressing supplier
@@victoria653 thank you , found it on Amazon. One more thing can you tell me the percentage of alcohol you used?
Jonathan can you tell me what percentage alcohol you use???
Your videos are my favorite. I use the yellow bags but I think I am going to pick up some red and try them out. How is the cure time before you paint with the red bags? With the yellow I normally have to wait 1-2 weeks and it really hampers my ability to produce and sell.
Hey, thanks for the comment. With the red bags, I paint them the same day! No issues or maybe the next day if the weather is cold and curing is slower. I use Watered down acrylic black paint, when that dries, then I dry brush over top of that with gold/silver or grey. once that dries then a clear coat spray can over top to seal it. Going to make a video on how i paint my statues sometime this week.
Johnathon Wheeler That’s also how I paint mine I just wait a week or two because I am always worried that they aren’t cured all the way. What do you like to use to patch air holes? I just use straight Portland cement and mix it into a paste but didn’t know if you had found anything that worked better.
@@jrgjrg5097 for air bubbles www.homedepot.ca/product/quikrete-mix-n-zip-repair-mortar-1-36kg/1000684860 .Fast drying and works well. After it drys, it will be slightly discolored but if you use a little sand paper to sand it, it blends and you cannot tell that its been patched.. Do not use the repair mortar in the small tub. The tub one is really gritty and doesn't work well.
I have seen all your videos on statues and I think this is my favorite. I know you mentioned the red bag in a previous video about pouring during the winter. I’m down in New Jersey and once it gets too cold I don’t pour at all. But I bought a couple bags of the red today and I can believe that I can pour a statue even my large mother Mary at noon and have a solid statue at 4. I was wondering how you sell yours if you mostly do Facebook and Craig’s list or if you have any in local stores? I have a couple stores I sell in and I prefer that because I like being removed from the actual sale but I also do Facebook and just wanted your perspective.
Hey Jonathan, kind of an emergency question. Hoping you can respond asap... 😬
I cut a seam along the back of one of my rubber molds. Now, when I poured the concrete, concrete water has leaked out of the seam and into my fiberglass mother mold. I'm conflicted because I don't want to start over but I'm worried the leaked concrete will destroy my mold... Do you think it will be okay? Have you dealt with water leaks from a mold and how so?
Thanks in advance!
Do you ever find the wires you put in to strengthen the cast, ever show on the surface of the casting ? thanks
occasionally they pop out of the seams. I just snip them off and use a little repair mortar. Can also grind them off and then use some repair mortar.
@@victoria653 Thank you Johnathon.
Jonathan where do you get your molds from I was getting them from P David Jensen but he takes way too long to get is there anybody else I can order them from a good mods but he just takes too long
Try some super plasticizer in the mix. Amazing results with very little water.
plasticizer? ill look it up
@@victoria653 get same result with washing up liquid.....you can also add a rapid hardner
I made bird bath used same release still nightmare to get it out any suggestions please
i have had no issues, what products are you using?
good video, but use a dust mask!
Where can I get the big Asian statue molds ?
where do you get your molds from,i,m here in england and difficult to find placesalso very expensive to start off with.
Ebay is your best bet. They are hard to find
I'm having an extremely hard time getting the right consistency of my concrete, my first attempt was way to watery but it got into all the crevices of my mold but it look a few days to completely dry. My third attempt was a thicker consistency but it didn't get into all the crevices of my mold and the air bubbles were huge. Any suggestions or advice
Took me a few attempts and lots of trail and error. A bit of advice, do not mix too wet, the statues will be brittle and corrode later on. I like to mix it slightly more wet than the instruction on the bag ask for. Wacking your mold with a mallet really helps. Let me know if that works for you!
What kind of statues are you making?
@@victoria653 Thank you so much for responding, I really appreciate it. They’re torso body mould sculptures, it’s pretty much a naked body
I’m going to keep trying, I’m determined
Did you make those stands yourself...I am just starting out in this so any advice would be awesome!
stands? Do you mean the molds with legs?If so then yes, we make them!
@@victoria653 can I ask do you have a statue business...I am attempting to get started in this and have no clue what to do to start up. Any thoughts on what molds would be best to start with? Maybe planters...any wisdom you can give me would be great...I currently am a Milker on a dairy..but statues are my thing and I just want to try n go for it and sell a few...I dont have much money to get started so any suggestions you might have would be awesome!
Thank you for your video......just a quick question please.....how do you cure the air bubbles after curing the statue? Oh and where do you get your moulds from?
if you shake the molds are pouring, it will eliminate most of the air bubbles. Statue molds are hard to find, there are very few companies that make them. Ebay is a good place to start
@@victoria653 thank you
So you don't have to do anything else to the wires other then just stick them in before pouring the cement. With the shaking does it not let them go to and edge or the bottom and stick through the concrete?
no never had any issues
I was thinking the same thing .
Hey Jonathan 🙌 Every store and pharmacy is out of stock of rubbing alcohol due to the Pandemic- is there an alternative that I could use instead with the caster oil? Thank you 🙏
i know! I found some at London Drugs here in Canada, been checking every day and finally they have some in stock. You can also order from dental supply websites, that would be you best bet and keep checking you local pharmacy supply. Not sure on alternatives to Caster oil mold release. Maybe buy a distill on eBay and make your own moonshine hahaha
Johnathon Wheeler thank you 🙏🤗
Thanks for the tips. I have also found some 70% isopropyl alcohol in janitorial stores. Good luck
I am using everclear which seems to be okay.
Can you use a cement Vibrator? Or is there a reason why people dont and use a hammer?
yep that would work
Where can I buy these molds?
Hi do you have robber mold for sale ??
Does anyone know a UK equivalent to the premix he's using? Thanks
Let me know if you find one. I have had a few people ask me, ChEeRiO
@@victoria653 I never found one mate. But I used 2 parts concrete 2 parts sand to 1 small 5m gravel. Trick is to leave it to set for 48 hours minimum
My cement keeps falling apart when I demold 3 days later any thoughts on what I’m doing wrong?
your probably mixing it too runny. Try and mix it as the bag says and let me know if that works for you
I know this is 2 years late and you most likely figured it out but it's most likely due to the cement getting moisture while still in the bag. This will cause the chemical reaxtion to start and basically render it useless. If you get a bag of cement and there are clumps in it that can be broken (not stone) then this is what happened. I had this happen and when I went to remove the casting it broke apart like it was hard compacted sand. The cement should be a powder only. No clumps.
We’re can a buy the molds
molds are very hard to find, ebay is a good place to start
Where did you find the concrete molds at?
DOnt have any at the moment, have been really busy making statues for spring
@@victoria653 he was asking for informations on where to find those molds.
Where do you get the molds
Hello ,most of the molds i make because its alot cheaper than buying them. eBay is probably the best place.
what kind of latex did you use thank you
4:54 is it latex rubber mold inside?
yep
And thank you sorry about that
Conceit resio
Concrete rasio
I’m about to try to make my first small statue tomorrow. I own a statue company but are buying them rite now. Where is the best place to buy molds that’ll last?
hello, eBay is your best bet